S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
48462A2
48462A3
48462A4
811612A2
811612A3
896158A01
827670A2
893931A01
Pro Marine Shock Rod Cap Seal Kit 8M0060145P
The Pro Marine 8M0060145P Shock Rod Cap Seal Kit is designed to rebuild the cap assembly used on compatible Mercury 8M0060145 Shock Rod Assemblies.
This seal kit provides a lower-cost repair option for customers whose existing shock rod cap housing is still reusable but the seals are leaking, damaged, or worn.
Designed For These Applications
This seal kit is used with the Mercury 8M0060145 Shock Rod Assembly found on select Mercury trim and tilt systems used on:
| Engine Model | Horsepower | Serial Range |
|---|---|---|
| Mercury Jet | 105 HP | 2B752836 and Below |
| Mercury FourStroke | 135 HP | 2B752836 and Below |
| Mercury FourStroke | 150 HP | 2B752836 and Below |
What This Seal Kit Repairs
This kit is specifically intended to reseal the shock rod cap assembly used on the Mercury 8M0060145 hydraulic shock rod assembly.
It is commonly used to repair:
- Hydraulic fluid leaks
- Worn cap seals
- Trim fluid seepage
- Aging hydraulic seal components
- Preventive trim system maintenance
If your cap assembly is physically damaged, heavily corroded, cracked, or otherwise not reusable, you may need the complete shock rod assembly instead.
Need the Complete Shock Rod Assembly?
If your original shock rod cap housing is damaged or not suitable for rebuilding, check out the complete OEM Mercury shock rod assembly:
OEM Mercury 8M0060145 Shock Rod Assembly
- Complete Mercury shock rod assembly
- OEM Mercury / Quicksilver component
- Used when the original cap housing cannot be resealed
- Fits select Mercury 105 Jet, 135HP, and 150HP applications
Part Numbers and Cross References
| Type | Part Number |
|---|---|
| Pro Marine | 8M0060145P |
| Used With | Mercury 8M0060145 |
| Application | Shock Rod Cap Seal Kit |
| System | Hydraulic Power Trim |
What This Kit Is Used For
This kit is used during hydraulic trim and tilt system service to rebuild the cap portion of compatible Mercury shock rod assemblies.
Replacing leaking or worn seals can help restore trim system sealing and reduce hydraulic fluid leakage without replacing the complete assembly.
This is often a more economical repair solution when the original cap housing itself is still reusable.
Features and Benefits
- Pro Marine shock rod cap seal kit
- Designed for Mercury 8M0060145 shock rod assemblies
- Lower-cost alternative to replacing the full assembly
- Helps repair leaking hydraulic trim systems
- Designed for reusable cap housings
- Supports hydraulic trim and tilt maintenance
- Ideal for preventive trim system service
- Marine-grade replacement seals
System Function and Connections
- System Type: Hydraulic power trim
- Application: Shock rod cap reseal
- Used With: Mercury 8M0060145 shock rod assembly
- Related Components: Trim cylinders, pistons, trim pump, hydraulic assemblies
FAQ
What does the Pro Marine 8M0060145P fit?
This seal kit is designed for the cap assembly used on Mercury 8M0060145 shock rod assemblies.
Can this repair a leaking trim assembly?
Yes. This kit is intended to repair leaking or worn seals inside compatible shock rod cap assemblies.
Does this replace the complete shock rod assembly?
No. This kit is only for rebuilding the cap portion of the assembly.
What if my cap housing is damaged?
If the cap housing is cracked, heavily corroded, or otherwise not reusable, you should replace the complete shock rod assembly.
Where can I find the complete shock rod assembly?
You can view the OEM Mercury 8M0060145 Shock Rod Assembly linked above.
Why would I use this kit instead of replacing the full assembly?
This kit can be a lower-cost repair option when only the seals have failed and the original cap housing is still reusable.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic trim components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
8M0060145P, Mercury shock rod seal kit, Mercury shock rod cap seal kit, Mercury trim seal kit, Mercury hydraulic trim repair, Mercury shock rod rebuild kit, Mercury 8M0060145 seals, Mercury trim cap seals, Mercury hydraulic trim seals, Mercury 105 Jet trim repair, Mercury 135HP trim seals, Mercury 150HP trim seals, Mercury trim cap rebuild
OEM Mercury Power Trim Seal Kit
Mercury EFI Power Trim Hydraulic O-Ring & Seal Kit
This genuine OEM Mercury power trim seal kit is used on select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards.
The kit contains hydraulic O-rings and sealing components used during trim cylinder reseal service, hydraulic trim repair, and power trim maintenance.
Compatible Applications
| Horsepower | Engine Model | Serial Range | Application Notes |
|---|---|---|---|
| 105HP | Mercury EFI Jet | 3B672358 & Up | Power trim assembly components |
| 135HP | Mercury EFI FourStroke | 2B131942 & Up | Hydraulic trim and tilt systems |
| 150HP | Mercury EFI FourStroke | 1B905505 & Up | Power trim assembly components |
| 150HP | Mercury EFI Sea Pro | 2B139139 & Up | Commercial Sea Pro applications |
| 150HP | Mercury EFI Pro XS | 2B550139 & Up | Performance Pro XS models |
Always verify your engine horsepower, model type, and serial number before ordering hydraulic trim components and seal kits.
OEM Part Numbers & Cross References
| Type | Part Number |
|---|---|
| Mercury OEM Number | 8M0057770 |
What This Power Trim Seal Kit is Used For
This Mercury hydraulic trim seal kit is used during repair and reseal service of compatible Mercury power trim and tilt systems.
The included hydraulic O-rings and sealing components help seal trim cylinders, hydraulic passages, pistons, caps, and trim assembly components depending on trim system configuration.
Hydraulic seals commonly wear over time due to heat, hydraulic pressure, contamination, and marine operating conditions.
Replacing worn trim seals during hydraulic service can help reduce hydraulic fluid leaks and restore proper trim and tilt operation.
Key Features and Benefits
- Genuine OEM Mercury hydraulic trim seal kit
- Fits select Mercury EFI FourStroke trim systems
- Fits 105HP EFI Jet, 135HP EFI, and 150HP EFI models
- Includes hydraulic O-rings and sealing components
- Designed for trim cylinder reseal and repair service
- Helps reduce hydraulic fluid leaks
- Supports proper trim and tilt operation
- OEM Mercury hydraulic fit and compatibility
Power Trim Seal Kit Details
- Brand: Mercury Marine
- Part Type: Hydraulic O-Ring & Seal Kit
- OEM Part Number: 8M0057770
- Application: Mercury EFI FourStroke Power Trim Systems
- Horsepower Range: 105HP-150HP
- System: Power Trim & Tilt Hydraulic System
- Use: Hydraulic trim reseal and repair service
FAQ
What engines does this trim seal kit fit?
This kit fits select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards depending on serial number range.
What is this seal kit used for?
This kit is used to reseal and service compatible Mercury hydraulic trim and tilt systems.
Is this a genuine Mercury part?
Yes. This is a genuine OEM Mercury hydraulic trim seal kit.
Should I verify my serial number before ordering?
Yes. Mercury used multiple trim system designs and hydraulic assemblies, so serial number verification is strongly recommended.
What are common signs of leaking trim seals?
Common symptoms may include hydraulic fluid leakage, trim drifting, weak trim operation, or inability to hold trim position.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic and trim components should be installed only after proper diagnosis and inspection.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0057770, Mercury trim seal kit, Mercury power trim O-ring kit, Mercury hydraulic trim kit, Mercury 105 EFI Jet trim seals, Mercury 135 EFI trim seals, Mercury 150 EFI trim seals, Mercury Sea Pro trim kit, Mercury Pro XS trim seal kit, Mercury trim cylinder seal kit, Mercury power trim repair kit, Mercury hydraulic O-rings
878409A1