S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Yamaha Outboard Parts
Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.
Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.
Shop Yamaha Outboard Parts by System
- Complete Powerheads
- Control Cables & Boxes
- Cooling System
- Cowlings & Components
- Electrical System
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Rebuilding a Yamaha Outboard?
Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.
Shop Engine Rebuild Parts by Model »Find the Correct Yamaha Outboard Part
Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.
Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Yamaha Outboard Engine Families
Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.
- Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
- Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
- V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
- VMAX SHO: performance-oriented Yamaha SHO applications
- HPDI: high-pressure direct-injection Yamaha 2-stroke applications
- High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
- Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
- Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
- Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
- Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
- Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
- Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
- Genuine Yamaha OEM and aftermarket replacement options for many applications.
- Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component.
- Dealer pricing available for qualified marine businesses.
- Large selection of Yamaha service kits and repair components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Yamaha outboard part?
Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.
Can I search Yamaha parts by OEM part number?
Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.
Do Yamaha outboard parts vary by model and year?
Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.
Do you carry Yamaha engine rebuild parts?
Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.
Do you carry both OEM and aftermarket Yamaha parts?
Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.
What Yamaha parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Replacement Hydraulic Steering Cylinder
Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder
The Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder is the replacement steering cylinder used with the Pro Marine 350-HSTEER hydraulic steering system. It is designed for high-horsepower single outboard setups where smooth, controlled steering response is critical.
This is the cylinder only. Helm pump, hoses, steering fluid, and fill/bleed accessories are sold separately unless purchased as part of the complete 350-HSTEER system.
What This Cylinder Is Used For
The steering cylinder converts hydraulic pressure from the helm pump into side-to-side movement at the outboard engine. It is the component that physically moves the engine when you turn the steering wheel.
If your current cylinder is leaking, damaged, binding, or worn, replacing it can restore proper steering control and improve the overall feel of the system.
Read our 350-HSTEER Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| 350-HSTEER Systems | Replacement hydraulic steering cylinder |
| Single Outboards up to 350HP | High-horsepower hydraulic steering applications |
| Bass Boats | Responsive steering and control at speed |
| Bay Boats | Smooth steering in shallow and open water |
| Center Consoles | Reliable steering feel for offshore and coastal use |
Build or Service Your Steering System
Complete Steering Kit
Need the full system instead of just the cylinder? The complete kit includes the cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHelm Pump
Pair this cylinder with the matching Pro Marine helm pump for proper hydraulic steering operation.
View 350-HELM-025 Helm PumpHydraulic Hoses
Select the correct hydraulic hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Hose
Hydraulic fluid and a fill hose assembly help make installation and bleeding easier during service.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Complete Your Steering Setup
Need additional Pro Marine steering components?
Key Features and Benefits
- Replacement hydraulic steering cylinder for 350-HSTEER systems
- Designed for high-horsepower single outboard steering applications
- Helps restore smooth steering movement and control
- Front-mount hydraulic steering cylinder design
- Works with hydraulic helm, hose, and fluid circuit
- Good option for service, repair, or steering system rebuilds
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Steering cylinder
- Connection Type: Hydraulic hose connections to helm circuit
- Typical Use: Single outboard applications up to 350HP when used with the proper system
- Related Components: Helm pump, hydraulic hoses, steering fluid, fittings, and fill/bleed tools
FAQ
Is this the complete steering system?
No. This listing is for the hydraulic steering cylinder only. The complete
system is available as the Pro Marine 350-HSTEER kit.
What system does this cylinder work with?
This cylinder is designed for use with the Pro Marine 350-HSTEER hydraulic
steering system.
Are hydraulic hoses included?
No. Hydraulic hoses are sold separately so you can choose the correct length
for your boat and rigging layout.
When should I replace a steering cylinder?
Replace the cylinder if it is leaking, damaged, binding, corroded, or no
longer holding proper steering control.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HSTEER-CYL, Pro Marine hydraulic steering cylinder, hydraulic steering cylinder, outboard steering cylinder, front mount steering cylinder, 350-HSTEER replacement cylinder, hydraulic steering repair, boat steering cylinder