S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Wraparound Outboard Rigging Protection
1.5" Split Conduit Outboard Rigging Tube - SPLITTUBING-15
SPLITTUBING-15 is a 1.5" split-conduit marine rigging tube designed to wrap around existing outboard wiring, hoses and cables without requiring the entire rigging bundle to be disconnected and fed through a closed tube.
This makes split conduit especially useful for existing installations, rerigging projects and repairs where the engine is already connected.
Pro Marine also stocks a larger 2" split-conduit version, traditional 2" black and white rigging tube, wrappable braided tubing, transom flanges and a 2" rigging hose union.
Diameter: 1.5"
Style: Split Conduit
Application: Outboard Engine Rigging
Best Use: Existing Wiring, Hose and Cable Bundles
Installation Style: Wraparound
What This Split Conduit is Used For
SPLITTUBING-15 is used to organize and protect an existing outboard rigging bundle without requiring every component to be removed from the engine or boat.
Depending on the installation, the conduit may be used around:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Why Choose Split Conduit?
Traditional closed rigging tube normally requires the installer to feed the wiring, hoses and cables through the tube.
Split conduit opens along its length, allowing it to be installed around an existing rigging bundle.
This makes it a practical option when:
- The outboard is already fully rigged
- You do not want to disconnect engine harnesses or hoses
- The existing rigging needs additional abrasion protection
- You are cleaning up an older transom installation
- You need to replace deteriorated protective tubing
- You want easier access for future service
The conduit should surround the wiring and hoses without tightly compressing the bundle.
If the 1.5" size is too tight, use the 2" split-conduit version rather than squeezing fuel hose, steering hoses or control cables into an undersized sleeve.
Need 2" Split Conduit?
Larger split-conduit option for outboard rigging bundles that require more room than the 1.5" version provides.
Like SPLITTUBING-15, the split design allows the tubing to be installed around existing cables and hoses.
View 2" Split ConduitWrappable Split Braided Rigging Tube
Pro Marine also stocks wrappable braided tubing for customers who want a flexible wraparound alternative to split conduit.
1.5" Wrappable Split Braided Tube - F6N150
1.5" wrappable braided protection for existing wiring, hoses and cable bundles.
View 1.5" Braided Tube
2" Wrappable Split Braided Tube - F6N200
Larger 2" braided wrap option for bigger outboard rigging bundles.
View 2" Braided TubeTraditional 2" Rigging Tube Options
For new installations or projects where the rigging can be fed through a closed tube, Pro Marine also stocks traditional 2" rigging hose.
2" Black Rigging Tube - RIGTUBE-B
Traditional black 2" outboard rigging tube sold by the foot for clean new installations.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" traditional rigging tube for installations where a lighter color better matches the boat or outboard.
View White 2" Rigging TubeRigging Tube Style Comparison
| Style | Installation | Best Use | Sizes |
|---|---|---|---|
| Split Conduit | Wraps around existing rigging | Existing installations and repairs | 1.5" and 2" |
| Wrappable Braided Tube | Wraps around existing rigging | Flexible cable and hose protection | 1.5" and 2" |
| Traditional Rigging Tube | Cables and hoses are fed through tube | New installations and finished transom rigging | 2" Black and White |
Related 2" Rigging Hardware
2" Transom Flange - TFLANGE-2
Standard transom flange for traditional 2" rigging tube installations.
View Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
Transom flange with a separate port for routing the fuel line outside the main 2" rigging bundle.
View Fuel Port Flange
2" Rigging Hose Union - TUNION
Connects two compatible sections of traditional 2" rigging hose.
View Rigging Hose UnionInstallation Tips
- Measure the complete rigging bundle before choosing 1.5" or 2" conduit.
- Do not tightly compress fuel hose, hydraulic hoses or control cables.
- Wrap the conduit around the bundle rather than forcing components through it.
- Leave sufficient slack for full outboard steering movement.
- Check trim and tilt operation before finalizing the routing.
- Avoid sharp bends in the completed rigging bundle.
- Keep the conduit clear of sharp transom edges.
- Inspect the individual wiring and hoses for chafe before covering them.
- Replace damaged rigging components rather than simply covering the damage.
When Should Split Rigging Conduit Be Replaced?
Inspect the conduit during routine engine and transom service.
Consider replacement if you find:
- Cracked or split sections beyond the intended opening
- Heavy abrasion
- UV deterioration
- Sections that no longer stay around the rigging bundle
- Exposed or unprotected wiring and hoses
- A rigging bundle that has outgrown the existing conduit
Key Features and Benefits
- 1.5" split marine rigging conduit
- Installs around existing outboard rigging
- No need to feed the entire bundle through a closed tube
- Helps organize wiring, hoses and cables
- Helps protect rigging from abrasion and snagging
- 2" split conduit also available
- 1.5" and 2" wrappable braided options available
- Traditional black and white 2" rigging tube also available
FAQ
What size is SPLITTUBING-15?
SPLITTUBING-15 is 1.5" split-conduit rigging tubing.
What is the advantage of split conduit?
The conduit can be wrapped around existing engine rigging instead of
requiring all of the hoses and cables to be disconnected and fed through
a closed tube.
Can this be used around outboard wiring?
Yes. It can be used to organize and protect compatible existing outboard
wiring, hoses and cable bundles.
What if 1.5" is too small?
Pro Marine also stocks
2" split conduit
for larger rigging bundles.
Do you have a braided wrap option?
Yes. Pro Marine stocks
1.5" wrappable braided tubing
and
2" wrappable braided tubing
.
Do you stock traditional closed rigging tube?
Yes. Pro Marine stocks
2" black rigging tube
and
2" white rigging tube
.
Is split conduit better for an engine that is already rigged?
It is often a convenient option because it can be installed around the
existing bundle without completely disconnecting the engine rigging.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
SPLITTUBING-15, 1.5 inch split conduit, 1-1/2 inch rigging tube, split outboard rigging tube, marine split conduit, outboard cable protection, outboard wiring conduit, marine rigging sleeve, split rigging hose, SPLITTUBING-2, F6N150, F6N200, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION
Wraparound Outboard Rigging Protection
2" Split Conduit Outboard Rigging Tube - SPLITTUBING-2
SPLITTUBING-2 is a 2" split-conduit marine rigging tube designed to wrap around existing outboard wiring, hoses and cables without requiring the complete rigging bundle to be disconnected and fed through a closed tube.
The larger 2" size is a good choice for bulkier rigging bundles that need more room than a 1.5" split conduit can provide.
Pro Marine also stocks a smaller 1.5" split-conduit version, traditional 2" black and white rigging tube, wrappable braided tubing, transom flanges and a 2" rigging hose union.
Diameter: 2"
Style: Split Conduit
Application: Outboard Engine Rigging
Best Use: Larger Existing Wiring, Hose and Cable Bundles
Installation Style: Wraparound
What This Split Conduit is Used For
SPLITTUBING-2 is used to organize and protect a larger existing outboard rigging bundle while allowing the tubing to be installed around the cables and hoses instead of feeding them through a closed tube.
Depending on the installation, the conduit can protect and organize:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Why Choose 2" Split Conduit?
Closed rigging tube usually requires engine wiring, hoses and cables to be disconnected and fed through the tube.
Split conduit opens along its length, so it can be installed around an already-rigged engine bundle.
The 2" size is especially useful when:
- The existing rigging bundle is too large for 1.5" conduit
- The engine is already fully rigged
- You want to avoid disconnecting harnesses and hoses
- The existing cable bundle needs additional abrasion protection
- You are cleaning up or rerouting an older transom installation
- You want easier access for future repairs or inspection
The 2" split conduit should surround the rigging bundle without tightly compressing fuel hose, hydraulic hoses, wiring or control cables.
Leave enough space for the bundle to flex as the outboard steers, trims and tilts.
Need 1.5" Split Conduit Instead?
Smaller split-conduit option for more compact wiring and hose bundles.
If the existing rigging fits comfortably inside 1.5" conduit, this smaller size may provide a tighter and cleaner finished installation.
View 1.5" Split ConduitWrappable Split Braided Rigging Tube
Pro Marine also stocks wrappable braided tubing for customers who want a softer and more flexible wraparound rigging solution.
1.5" Wrappable Split Braided Tube - F6N150
Flexible braided wrap for smaller existing outboard wiring and hose bundles.
View 1.5" Braided Tube
2" Wrappable Split Braided Tube - F6N200
2" braided wrap option for larger existing outboard rigging bundles.
View 2" Braided TubeTraditional 2" Rigging Tube Options
For installations where the cables and hoses can be fed through a closed tube, Pro Marine also stocks traditional 2" rigging tube in black and white.
2" Black Rigging Tube - RIGTUBE-B
Traditional black 2" outboard rigging tube sold by the foot for new or fully accessible engine rigging installations.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" traditional rigging tube for installations where a lighter color better matches the hull, transom or outboard.
View White 2" Rigging TubeRigging Tube Style Comparison
| Style | Installation | Best Use | Sizes |
|---|---|---|---|
| Split Conduit | Wraps around existing rigging | Existing installations, repairs and rerigging | 1.5" and 2" |
| Wrappable Braided Tube | Wraps around existing rigging | Flexible protection and cable organization | 1.5" and 2" |
| Traditional Rigging Tube | Cables and hoses are fed through the tube | New installations and finished transom rigging | 2" Black and White |
Related 2" Rigging Hardware
2" Transom Flange - TFLANGE-2
Standard transom flange for traditional 2" closed rigging tube installations.
View Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
Transom flange with a separate port for routing the fuel hose outside the main rigging bundle.
View Fuel Port Flange
2" Rigging Hose Union - TUNION
Connects two compatible sections of traditional 2" rigging hose for extensions or repairs.
View Rigging Hose UnionInstallation Tips
- Measure the entire rigging bundle before selecting conduit size.
- Use 2" conduit when 1.5" tubing would be too tight.
- Do not compress fuel hose, hydraulic hoses or control cables.
- Wrap the conduit around the existing bundle rather than forcing components through it.
- Leave enough slack for full steering movement.
- Check full trim and tilt movement after installation.
- Avoid sharp bends in the completed rigging bundle.
- Inspect wiring and hoses for damage before covering them.
- Replace damaged components instead of hiding them inside the conduit.
When Should Split Rigging Conduit Be Replaced?
Split conduit should be inspected periodically along with the engine wiring and hoses it protects.
Replace it if you find:
- Excessive cracking
- Heavy abrasion
- UV deterioration
- Torn or missing sections
- Conduit that no longer stays around the rigging bundle
- Exposed hoses or wiring
- A bundle that has grown too large for the existing conduit
Key Features and Benefits
- 2" split marine rigging conduit
- Installs around existing outboard rigging
- Helps avoid disconnecting wiring, hoses and cables
- Provides extra room for larger rigging bundles
- Helps protect rigging from abrasion and snagging
- 1.5" split-conduit option available
- 1.5" and 2" wrappable braided options available
- Traditional black and white 2" rigging tube also available
FAQ
What size is SPLITTUBING-2?
SPLITTUBING-2 is 2" split-conduit rigging tubing.
What is the advantage of split conduit?
It can be installed around an existing outboard rigging bundle without
requiring every cable, hose and harness to be disconnected.
When should I choose 2" instead of 1.5"?
Use the larger 2" size when the existing rigging bundle does not fit
comfortably inside 1.5" conduit.
Can this be used around steering hoses and wiring?
Yes, provided the complete bundle fits without being tightly compressed
and the installation still allows normal engine movement.
Do you stock a smaller split-conduit size?
Yes. Pro Marine stocks
1.5" split conduit
.
Do you have a braided wrap option?
Yes. Pro Marine stocks
1.5" wrappable braided tubing
and
2" wrappable braided tubing
.
Do you stock traditional 2" rigging tube?
Yes. Pro Marine stocks
black 2" rigging tube
and
white 2" rigging tube
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
SPLITTUBING-2, 2 inch split conduit, 2 inch rigging tube, split outboard rigging tube, marine split conduit, outboard cable protection, outboard wiring conduit, marine rigging sleeve, split rigging hose, SPLITTUBING-15, F6N150, F6N200, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION
Clean 2" Outboard Rigging Tube Connection
2" White Transom Rigging Tube Flange - TFLANGE-2W
Pro Marine TFLANGE-2W is a white 2" transom flange used to create a clean connection point for compatible 2" outboard rigging tube where the engine rigging passes through the boat's transom.
The white finish makes this flange a natural match for Pro Marine's 2" white rigging tube and boats where white rigging hardware better complements the hull and transom.
Pro Marine also stocks the same style flange in black, a 2" flange with a separate fuel-hose port, 2" black and white rigging tube, and a 2" rigging-hose union.
Inside Diameter: 2"
Color: White
Part Type: Transom Rigging Tube Flange
Application: Outboard Engine Rigging
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
What This Transom Flange is Used For
TFLANGE-2W provides a finished transition point for a compatible 2" outboard rigging tube where the engine's wiring, hoses and cables are routed through the transom area.
Instead of leaving the rigging tube loose at the transom opening, the flange helps create a cleaner and more organized installation.
A typical outboard rigging bundle may include:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
- Other compatible engine rigging
Best Match: 2" White Rigging Tube
The natural companion to the TFLANGE-2W is Pro Marine's 2" white rigging tube.
Together, the white tube and white flange provide a coordinated rigging solution for boats where white better matches the hull, transom or engine installation.
View 2" White Rigging TubePrefer Black Rigging Hardware?
The same basic rigging setup is also available in black. Choose the color that best matches the boat, engine and existing transom rigging.
2" Black Transom Flange - TFLANGE-2
Black version of the 2" Pro Marine transom rigging flange for installations using black rigging hardware.
View Black Transom Flange
2" Black Rigging Tube - RIGTUBE-B
Traditional black 2" outboard rigging tube for routing and protecting engine wiring, cables and hoses.
View 2" Black Rigging Tube2" Rigging Tube and Flange Options
| Product | Color / Style | Part Number | Use |
|---|---|---|---|
| Transom Flange | White | TFLANGE-2W | 2" white rigging-tube transom connection |
| 2" Rigging Tube | White | RIGTUBE-W | White outboard rigging tube |
| Transom Flange | Black | TFLANGE-2 | 2" black rigging-tube transom connection |
| 2" Rigging Tube | Black | RIGTUBE-B | Black outboard rigging tube |
Other 2" Rigging Hardware
2" T-Flange with Fuel Port - TFLANGE-FP
Alternative transom flange with a separate port for routing the fuel hose outside the main 2" rigging bundle.
View T-Flange with Fuel Port
2" Rigging Hose Union - TUNION
Connects two compatible sections of 2" rigging tube when extending or repairing an existing rigging-tube installation.
View 2" Rigging Hose UnionStandard Flange or Fuel-Port Flange?
The correct transom flange depends on how the boat's engine rigging is routed.
| Flange | Best For |
|---|---|
| TFLANGE-2W White Standard Flange | Standard 2" white rigging-tube installations |
| TFLANGE-2 Black Standard Flange | Standard 2" black rigging-tube installations |
| TFLANGE-FP Flange with Fuel Port | Installations where the fuel hose is routed separately from the main rigging bundle |
Installation Tips
- Verify that the rigging tube and flange are compatible 2" components.
- Plan the transom opening and rigging route before installation.
- Keep the engine rigging bundle free from sharp bends and pinch points.
- Leave enough slack for full steering movement.
- Check the engine through its full trim and tilt range after installation.
- Avoid tightly compressing wiring, control cables or hydraulic hoses.
- Inspect all hoses and wiring before enclosing them inside the rigging tube.
- Secure and seal the flange to the transom using installation methods appropriate for the boat.
Pair TFLANGE-2W with Pro Marine's 2" White Rigging Tube - RIGTUBE-W for a coordinated white transom rigging installation.
Key Features and Benefits
- 2" transom rigging flange
- White finish
- Designed for compatible 2" marine rigging tube
- Creates a clean rigging-tube transition at the transom
- Helps organize outboard wiring, cables and hoses
- Natural match for Pro Marine 2" white rigging tube
- Black flange option also available
- Fuel-port flange option available
- 2" rigging hose union available for extensions and repairs
FAQ
What size rigging tube is TFLANGE-2W designed for?
TFLANGE-2W is a 2" transom rigging flange.
What color is TFLANGE-2W?
This version is white.
Which rigging tube should I use with the white flange?
For a matching white installation, pair it with
RIGTUBE-W 2" White Rigging Tube
.
Do you have this flange in black?
Yes. Pro Marine also stocks the
TFLANGE-2 2" Black Transom Flange
.
What if I want the fuel hose separated from the main rigging tube?
See the
TFLANGE-FP 2" T-Flange with Fuel Port
,
which provides a separate fuel-hose routing point.
Can two sections of 2" rigging tube be connected together?
Pro Marine stocks the
TUNION 2" Rigging Hose Union
for joining compatible sections of 2" rigging tube.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
TFLANGE-2W, white transom flange, 2 inch transom flange, white rigging tube flange, outboard rigging flange, marine transom flange, 2 inch rigging tube, RIGTUBE-W, TFLANGE-2, RIGTUBE-B, TFLANGE-FP, TUNION, outboard rigging tube hardware, white outboard rigging
Outboard Transom Rigging Connection
2" Black Outboard Rigging Tube Transom Flange - TFLANGE-2
TFLANGE-2 is a 2" black transom flange from MPI Products designed to provide a clean entry point where outboard rigging tube passes through the transom or rigging area of the boat.
The flange helps organize the transition between the boat and the exposed rigging bundle while giving the 2" rigging tube a cleaner, more finished mounting point.
Pro Marine also stocks black and white 2" rigging tube, a version of the flange with a separate fuel port, a 2" rigging hose union, split conduit and wrappable braided rigging protection.
Rigging Tube Size: 2"
Color: Black
Manufacturer: MPI Products
Application: Outboard Transom Rigging
Pro Marine Item: TFLANGE-2
What This Transom Flange is Used For
TFLANGE-2 is used where a 2" outboard rigging tube transitions through the boat or transom rigging area.
Instead of allowing the rigging hose to simply pass through an unfinished opening, the flange provides a defined connection point for the tube.
Depending on the engine installation, the rigging tube may organize:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim and accessory wiring
- Other outboard engine hoses and cables
Why Use a Rigging Tube Flange?
The transom entry point is one of the most visible parts of an outboard rigging installation. A flange helps create a cleaner and more organized transition between the rigging tube and the boat.
Benefits include:
- Creates a cleaner finished transom appearance
- Provides a defined entry point for 2" rigging tube
- Helps organize the engine rigging bundle
- Reduces direct contact between the tube and an unfinished opening
- Makes future rigging inspection and service easier
The rigging tube and flange should not be installed so tightly that the engine cannot steer, trim or tilt normally.
Leave enough slack in the wiring, steering hoses, fuel line and control cables so engine movement does not pull against the flange.
2" Black and White Rigging Tube
2" Black Rigging Tube - RIGTUBE-B
Black 2" marine rigging tube sold by the foot for organizing and protecting outboard engine wiring, hoses and cables.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" rigging tube for boats where a lighter color better matches the hull, transom or engine installation.
View White 2" Rigging TubeNeed a Separate Fuel Hose Port?
If the installation benefits from routing the fuel hose separately, Pro Marine also stocks a TH Marine 2" T-flange with a dedicated fuel port.
This can reduce crowding inside the main rigging tube and gives the installer another routing option for the fuel line.
View T-Flange with Fuel Port2" Rigging Hose Union
The universal 2" rigging hose union joins two compatible sections of 2" rigging tube.
Useful when extending an existing rigging run or repairing a rigging system without replacing the entire length of hose.
View 2" Rigging Hose UnionSplit Conduit Rigging Options
If the engine is already rigged and you do not want to disconnect every cable and hose, split conduit can be wrapped around an existing bundle.
1.5" Split Conduit - SPLITTUBING-15
Smaller split conduit for wrapping and protecting existing outboard wiring and hose bundles.
View 1.5" Split Conduit
2" Split Conduit - SPLITTUBING-2
2" black split conduit for larger installed rigging bundles where a wraparound tube is easier to install than closed rigging hose.
View 2" Split ConduitWrappable Split Braided Rigging Tube
1.5" Wrappable Split Braided Tube - F6N150
Flexible wraparound braided protection for smaller existing engine wiring, hose and cable bundles.
View 1.5" Braided Tube
2" Wrappable Split Braided Tube - F6N200
Larger 2" wraparound braided option for protecting an existing rigging bundle without fully disconnecting the engine.
View 2" Braided TubeStandard Flange vs. Fuel Port Flange
| Flange | Size | Fuel Port | Typical Use |
|---|---|---|---|
| TFLANGE-2 | 2" | No | Standard 2" rigging tube transom connection |
| TFLANGE-FP | 2" | Yes | Rigging systems where the fuel hose is routed separately |
Installation Tips
- Verify the rigging tube is 2" before selecting the flange.
- Plan the rigging path before drilling or modifying the transom area.
- Leave sufficient slack for full engine steering movement.
- Make sure trim and tilt movement does not pull against the flange.
- Avoid sharp bends in steering hoses, fuel hose and control cables.
- Keep wiring away from sharp edges at the transom opening.
- Support the rigging bundle so excessive weight is not placed on the flange.
- Install and seal the flange according to the requirements of the boat and installation.
Key Features and Benefits
- 2" inside-diameter rigging connection
- Black transom flange
- MPI Products brand
- Designed for compatible outboard rigging installations
- Provides a finished transom entry for rigging tube
- Black and white 2" rigging tube available
- Fuel-port flange alternative available
- 2" rigging hose union available
- Split conduit and braided wrap alternatives available
FAQ
What size rigging tube fits TFLANGE-2?
TFLANGE-2 is designed for a 2" rigging tube connection.
What color is TFLANGE-2?
Pro Marine lists TFLANGE-2 as a black transom flange.
Who manufactures TFLANGE-2?
TFLANGE-2 is manufactured by MPI Products.
What is a rigging tube flange used for?
It provides a clean connection point where outboard rigging tube enters
the boat or transom rigging area.
Do you stock 2" rigging tube?
Yes. Pro Marine stocks
2" black rigging tube
and
2" white rigging tube
.
Do you carry a flange with a separate fuel port?
Yes. Pro Marine stocks the
TFLANGE-FP 2" T-Flange with Fuel Port
.
Can two pieces of 2" rigging tube be connected?
Yes. The
TUNION 2" Rigging Hose Union
is available for compatible installations.
What if the engine is already fully rigged?
Split conduit and wrappable braided tubing can be installed around an
existing rigging bundle without feeding every hose and cable through a
closed tube.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
TFLANGE-2, 2 inch transom flange, 2 inch rigging flange, outboard rigging flange, black transom flange, MPI transom flange, marine rigging tube flange, outboard cable flange, rigging hose flange, RIGTUBE-B, RIGTUBE-W, TFLANGE-FP, TUNION, SPLITTUBING-15, SPLITTUBING-2, F6N150, F6N200
Clean, Protected Outboard Engine Rigging
2" White Outboard Rigging Tube - RIGTUBE-W
RIGTUBE-W is a 2" white marine rigging tube used to organize and protect the wiring, control cables, hoses and other rigging running between an outboard engine and the boat.
The white finish provides a clean appearance for boats where white rigging better matches the hull, transom or engine installation. It can be paired with the TFLANGE-2W white 2" transom flange for a coordinated white rigging system.
Pro Marine also stocks black 2" rigging tube, standard and fuel-port transom flanges, a 2" rigging hose union, split conduit and wrappable braided rigging protection.
Nominal Size: 2"
Color: White
Application: Outboard Engine Rigging
Style: Traditional Closed Rigging Tube
Matching White Flange: TFLANGE-2W
What This Rigging Tube is Used For
Outboard rigging tube provides a protective outer covering around the collection of cables, hoses and wiring running between the boat and outboard engine.
Instead of leaving individual components exposed at the transom, the rigging tube helps combine them into a cleaner and more organized bundle.
Depending on the boat and engine configuration, the rigging bundle may include:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Hydraulic steering hoses
- Fuel hose where appropriate for the installation
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Matching White 2" Transom Flange
The TFLANGE-2W is the matching white transom flange for a clean 2" white rigging-tube installation.
The flange provides a finished transition point where the rigging tube meets the boat's transom while keeping the white color scheme consistent.
View 2" White Transom FlangeBuilding a Complete White Outboard Rigging System?
For a coordinated white installation, combine the RIGTUBE-W 2" white rigging tube with the TFLANGE-2W white transom flange.
| Component | Part Number | Purpose |
|---|---|---|
| 2" White Rigging Tube | RIGTUBE-W | Protects and organizes the outboard rigging bundle |
| 2" White Transom Flange | TFLANGE-2W | Creates a clean white rigging-tube transition at the transom |
| 2" Rigging Hose Union | TUNION | Joins two compatible sections of 2" rigging tube |
Other 2" Transom Flange Options
2" Black Transom Flange - TFLANGE-2
Black version of the standard 2" transom flange for installations where black rigging hardware is preferred.
View Black Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
Alternative 2" transom flange with a separate fuel-hose port for installations where the fuel line is routed independently from the main rigging bundle.
View T-Flange with Fuel PortNeed to Join Two Sections of 2" Rigging Tube?
The TUNION connects two compatible sections of 2" rigging tube and can be useful for extensions, repairs and rerigging projects.
View 2" Rigging Hose UnionPrefer Black Rigging Tube?
The same traditional 2" rigging-tube style is also available in black for boats where black better matches the engine or transom.
View 2" Black Rigging TubeNeed a Split Rigging Tube?
Traditional closed rigging tube works well when the wiring, cables and hoses can be fed through the tube. If the engine is already connected, Pro Marine also stocks split options that can be installed around the existing rigging bundle.
2" Split Conduit - SPLITTUBING-2
Split protective conduit that can be installed around an existing outboard rigging bundle.
View 2" Split Conduit
2" Wrappable Split Braided Tube - F6N200
Flexible braided wrap for protecting and organizing existing outboard wiring, hoses and cable bundles without completely disconnecting them.
View 2" Braided Rigging TubeTraditional Rigging Tube vs. Split Rigging Protection
| Style | Installation | Good Choice For |
|---|---|---|
| Traditional 2" Rigging Tube | Cables and hoses are fed through the tube | New installations and complete rerigging projects |
| 2" Split Conduit | Wraps around existing rigging | Existing engines where disconnecting the rigging is undesirable |
| 2" Wrappable Braided Tube | Wraps around existing rigging | Flexible protection and cable organization |
Installation Tips
- Measure the complete rigging bundle before selecting tube size.
- Plan the routing before feeding cables and hoses through the tube.
- Avoid tightly compressing wiring, steering hoses or control cables.
- Keep the rigging bundle free from sharp bends and pinch points.
- Leave enough slack for the outboard to steer fully in both directions.
- Check the engine through its full trim and tilt range after installation.
- Inspect wiring, hoses and cables for damage before enclosing them.
- Use a compatible transom flange for a clean, supported installation.
Rigging tube should organize and protect the engine rigging without tightly compressing the components inside.
The finished bundle still needs enough flexibility for normal steering, trim and tilt movement.
When Should Outboard Rigging Tube Be Replaced?
Inspect the exposed rigging tube whenever the engine or transom rigging is serviced.
Replacement may be appropriate if you find:
- Cracking or splitting
- Heavy abrasion or chafing
- UV deterioration
- Sections that have become excessively stiff or damaged
- Exposed wiring, hoses or cables
- Damage at the transom-flange connection
- A rigging bundle that has outgrown the existing tube
Key Features and Benefits
- 2" white outboard rigging tube
- Traditional closed rigging-tube design
- Helps organize engine wiring, cables and hoses
- Helps protect exposed outboard rigging
- White finish for a clean marine installation
- Matching white TFLANGE-2W transom flange available
- Black 2" rigging tube and flange also available
- Fuel-port flange option available
- 2" rigging hose union available
- Split conduit and braided alternatives available
FAQ
What size is RIGTUBE-W?
RIGTUBE-W is a 2" white outboard rigging tube.
What is outboard rigging tube used for?
It provides an outer protective covering that helps organize the wiring,
cables and hoses running between the boat and outboard engine.
Which white flange goes with RIGTUBE-W?
The matching white option is the
TFLANGE-2W 2" White Transom Flange
.
Do you have a black version of this rigging tube?
Yes. Pro Marine also stocks
RIGTUBE-B 2" Black Rigging Tube
.
Do you have a black 2" transom flange?
Yes. See the
TFLANGE-2 2" Black Transom Flange
.
What if I need a separate fuel-line port?
See the
TFLANGE-FP 2" T-Flange with Fuel Port
.
Can I connect two sections of 2" rigging tube?
Pro Marine stocks the
TUNION 2" Rigging Hose Union
for joining compatible sections of 2" rigging tube.
What if my engine is already rigged?
If disconnecting and feeding the existing rigging through a closed tube is
impractical, consider
2" split conduit
or
2" wrappable split braided tube
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
RIGTUBE-W, 2 inch white rigging tube, white outboard rigging tube, white marine rigging hose, outboard engine rigging tube, marine cable protection, outboard wiring tube, TFLANGE-2W, white transom flange, TFLANGE-2, TFLANGE-FP, TUNION, RIGTUBE-B, SPLITTUBING-2, F6N200
Outboard Rigging Protection
2" Black Outboard Rigging Tube - RIGTUBE-B
RIGTUBE-B is a 2" black marine rigging tube sold by the foot for organizing and protecting the hoses, wiring and cables routed between the boat and an outboard engine.
Rigging tube gives the exposed engine-rigging bundle a cleaner appearance while helping protect the individual components from abrasion, UV exposure, snagging and general movement around the transom.
Pro Marine also stocks a white 2" version, transom flanges, a fuel-port flange, a 2" rigging hose union, split conduit and wrappable braided rigging tube.
Inside Diameter: 2"
Color: Black
Sold: By the Foot
Application: Outboard Engine Rigging
Use: Organizes and Protects Cables, Wiring and Hoses
What Rigging Tube is Used For
Outboard rigging tube is used to cover and organize the group of components that runs from the boat's transom to the engine.
Depending on the boat and engine, the rigging bundle may contain:
- Engine wiring harnesses
- Battery cables
- Control cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim and accessory wiring
- Other engine-related hoses and cables
Instead of leaving these components exposed individually, rigging tube keeps them grouped together and provides a more finished installation.
Why Use Outboard Rigging Tube?
Rigging components are constantly exposed to engine movement, steering movement, vibration, sun and the marine environment. A proper rigging sleeve helps keep the bundle organized while adding a layer of physical protection.
Benefits include:
- Cleaner transom appearance
- Groups multiple cables and hoses together
- Helps reduce abrasion between individual rigging components
- Helps protect wiring and hoses from snagging
- Makes engine-compartment and transom rigging easier to organize
- Can simplify future inspection and service
Do not install rigging tube so tightly that it limits the engine's steering, trim or tilt movement.
Leave enough length and routing flexibility for the engine to turn fully from side to side and move through its normal trim and tilt range without pulling on the wiring, fuel hose, steering hoses or control cables.
Black and White 2" Rigging Tube Options
2" Black Rigging Tube - RIGTUBE-B
Black 2" marine rigging tube sold by the foot for custom-length outboard rigging installations.
Current Product
2" White Rigging Tube - RIGTUBE-W
Same 2" rigging-tube size in white for installations where a lighter color better matches the boat or transom.
View White 2" Rigging TubeTransom Flange Options
A transom flange provides a finished connection point where the rigging tube enters the boat.
2" T-Flange with Fuel Port - TFLANGE-FP
TH Marine universal 2" transom rigging flange with an additional fuel-hose port. Useful when the fuel line needs to be routed separately from the main rigging bundle.
View T-Flange with Fuel Port
2" Transom Flange - TFLANGE-2
MPI Products black 2" transom flange for creating a clean transition between the boat and the 2" rigging tube.
View 2" Transom Flange2" Rigging Hose Union
Universal 2" rigging hose union for joining two sections of compatible 2" rigging tube.
A union can be useful when extending an existing rigging-tube run or joining sections during a repair or rerigging project.
View 2" Rigging Hose UnionSplit Conduit Rigging Tube
Split conduit is useful when you need protective tubing that can be installed around existing wiring or hoses without disconnecting the entire rigging bundle.
1.5" Split Conduit Tubing - SPLITTUBING-15
MPI Products black split conduit with 1.5" ID, sold by the foot. The split design allows the tubing to wrap around existing rigging.
View 1.5" Split Conduit
2" Split Conduit Tubing - SPLITTUBING-2
MPI Products black split conduit with 2" ID, sold by the foot. A convenient alternative for existing cable and hose bundles that cannot easily be fed through a closed rigging tube.
View 2" Split ConduitWrappable Split Braided Rigging Tube
Wrappable braided tubing provides another option for organizing existing wiring, hoses and cables without having to feed the entire bundle through a conventional closed tube.
1.5" Wrappable Split Braided Tube - F6N150
Universal black 1.5" wrappable split braided tubing. Pro Marine lists this option in a 5-foot length.
View 1.5" Braided Rigging Tube
2" Wrappable Split Braided Tube - F6N200
Universal black 2" wrappable split braided tubing for larger existing rigging bundles. Pro Marine lists this option in a 5-foot length.
View 2" Braided Rigging TubeWhich Rigging Tube Style Should I Choose?
| Style | Best Use | Available Sizes |
|---|---|---|
| Traditional Rigging Tube | Clean finished installation where rigging can be fed through the tube | 2" Black / 2" White |
| Split Conduit | Adding protection around an existing cable and hose bundle | 1.5" / 2" |
| Wrappable Braided Tube | Flexible wraparound protection for existing rigging and wiring | 1.5" / 2" |
Rigging Tube Installation Tips
- Measure the rigging bundle before selecting tubing size.
- Allow enough space inside the tube so cables and hoses are not crushed.
- Leave sufficient length for full steering movement.
- Verify that trim and tilt movement does not pull on the rigging bundle.
- Avoid extremely tight bends in fuel hose, hydraulic hose and control cables.
- Keep wiring away from sharp edges where it enters or exits the rigging tube.
- Use a transom flange for a clean entry point into the boat.
- Inspect older tubing for cracking, splitting or abrasion.
- Use split conduit or braided wrap when removing existing rigging is impractical.
When Should Rigging Tube Be Replaced?
Outboard rigging tube lives in a high-movement, high-UV area of the boat. Over time it can become worn or damaged.
Consider replacement if you notice:
- Cracking or splitting
- Tears in the tube
- Severe fading or UV deterioration
- Chafing through the outer surface
- Tube separating from the transom flange
- Rigging components becoming exposed
- A tube that is too short after an engine or steering change
Black vs. White Rigging Tube
Pro Marine offers the 2" traditional rigging tube in both black and white.
Choose the color that best matches the boat, engine and transom rigging. Both options provide the same basic function of grouping and protecting the exposed rigging bundle.
Key Features and Benefits
- 2" marine rigging tube
- Black finish
- Sold by the foot for custom-length installations
- Organizes outboard wiring, hoses and cables
- Helps protect rigging from abrasion and snagging
- White 2" version available
- Standard and fuel-port transom flanges available
- 2" rigging hose union available
- 1.5" and 2" split conduit available
- 1.5" and 2" wrappable braided tube available
FAQ
What size is RIGTUBE-B?
RIGTUBE-B is 2" black marine rigging tube.
Is the rigging tube sold by the foot?
Yes. RIGTUBE-B is sold by the foot so you can order the length needed
for the installation.
What goes inside outboard rigging tube?
Depending on the installation, the tube can organize wiring harnesses,
battery cables, control cables, fuel hose, hydraulic steering hoses and
other engine-related cables or hoses.
Do you carry this rigging tube in white?
Yes. Pro Marine stocks
RIGTUBE-W 2" White Rigging Tube
.
Do you carry a 2" transom flange?
Yes. Pro Marine stocks the
TFLANGE-2 2" Transom Flange
and a
TFLANGE-FP 2" flange with a fuel port
.
Can two pieces of 2" rigging tube be joined?
Pro Marine stocks the
TUNION 2" Rigging Hose Union
for compatible applications.
What if I do not want to disconnect the existing cables?
Split conduit or wrappable braided tubing can be installed around an
existing bundle, making them useful alternatives when feeding the rigging
through a closed tube would be difficult.
Do you carry split conduit?
Yes. Pro Marine stocks
1.5" split conduit
and
2" split conduit.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
RIGTUBE-B, 2 inch rigging tube, black rigging tube, outboard rigging hose, outboard cable tube, marine rigging hose, transom rigging tube, engine rigging sleeve, boat cable protection, outboard wiring tube, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION, SPLITTUBING-15, SPLITTUBING-2, F6N150, F6N200
Flexible Wraparound Outboard Rigging Protection
1.5" Wrappable Split Braided Rigging Tube - F6N150
Pro Marine F6N150 is a 1.5" black wrappable split braided rigging tube supplied in a 5-foot length.
The split, wraparound design allows this protective sleeve to be installed around existing outboard wiring, hoses and cables without disconnecting the entire engine rigging bundle.
It is a useful option for rerigging, cleanup and abrasion protection when traditional closed rigging tube would require too much disassembly.
Nominal Size: 1.5"
Length: 5 Feet
Color: Black
Style: Wrappable Split Braided Tube
Application: Universal Marine Rigging
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
What This Rigging Tube is Used For
F6N150 wraps around an existing marine rigging bundle to help organize and protect wiring, hoses and cables.
Depending on the boat and engine setup, it may be used around:
- Engine wiring harnesses
- Battery cables
- Control cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Why Choose Wrappable Braided Rigging Tube?
The main advantage of a wrappable split sleeve is that the engine does not have to be completely disconnected just to install the protective covering.
The sleeve opens along its length, wraps around the existing bundle and provides a cleaner finished appearance while helping reduce direct abrasion and snagging.
It is especially useful when:
- The engine is already fully rigged
- You want to clean up exposed wiring and hoses
- Traditional closed rigging tube would be difficult to install
- You want flexible protection around an existing bundle
- You are repairing or rerouting an older transom installation
The braided sleeve should wrap around the wiring and hoses without tightly squeezing fuel hose, steering hoses or control cables.
If the 1.5" size is too small for the bundle, use the 2" F6N200 wrappable braided tube instead.
Need the 2" Braided Version?
Larger 2" wraparound braided rigging tube for cable and hose bundles that need more room than the 1.5" F6N150 provides.
View 2" Braided Rigging TubeSplit Conduit Rigging Tube Options
If you prefer a split conduit style instead of braided wrap, Pro Marine stocks both 1.5" and 2" split-conduit options.
1.5" Split Conduit - SPLITTUBING-15
1.5" split-conduit alternative for wrapping around an existing outboard rigging bundle.
View 1.5" Split Conduit
2" Split Conduit - SPLITTUBING-2
Larger split-conduit option for bulkier engine wiring and hose bundles.
View 2" Split ConduitTraditional 2" Rigging Tube Options
For new installations where the cables and hoses can be fed through a closed tube, Pro Marine also stocks traditional 2" marine rigging tube.
2" Black Rigging Tube - RIGTUBE-B
Traditional black 2" outboard rigging tube sold by the foot for clean new or fully accessible installations.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" traditional rigging tube for installations where a lighter color better matches the hull, transom or outboard.
View White 2" Rigging TubeWhich Rigging Tube Style Should I Use?
| Style | Installation | Best Use | Sizes |
|---|---|---|---|
| Wrappable Braided Tube | Wraps around existing rigging | Flexible protection and clean cable organization | 1.5" and 2" |
| Split Conduit | Wraps around existing rigging | Existing installations, repairs and rerigging | 1.5" and 2" |
| Traditional Rigging Tube | Rigging is fed through a closed tube | New installations and finished transom rigging | 2" Black and White |
Related Rigging Hardware
2" Transom Flange - TFLANGE-2
Standard flange for traditional 2" rigging-tube transom installations.
View Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
Transom flange with a separate fuel-hose port for compatible outboard rigging installations.
View Fuel Port Flange
2" Rigging Hose Union - TUNION
Connects two compatible sections of traditional 2" rigging hose for extensions and repairs.
View Rigging Hose UnionInstallation Tips
- Measure the complete rigging bundle before choosing the sleeve size.
- Wrap the braided sleeve around the existing bundle instead of disconnecting the engine rigging.
- Do not tightly compress fuel hose, steering hoses or control cables.
- Leave sufficient slack for full outboard steering movement.
- Check full trim and tilt travel before finalizing the installation.
- Avoid excessively tight bends in the finished rigging bundle.
- Inspect the wiring and hoses for existing damage before covering them.
- Replace damaged wiring or hoses rather than using the sleeve to conceal damage.
When Should a Wrappable Rigging Sleeve Be Replaced?
Inspect the braided tube whenever the engine rigging is serviced.
Replacement may be needed if you find:
- Torn or heavily worn braided material
- Severe abrasion
- Sections that no longer stay wrapped around the bundle
- Exposed wiring or hoses
- A rigging bundle that has become too large for the 1.5" sleeve
Key Features and Benefits
- 1.5" wrappable split braided rigging tube
- 5-foot length
- Black finish
- Universal marine application
- Pro Marine aftermarket product
- Installs around existing engine rigging
- Helps organize wiring, cables and hoses
- Helps protect exposed rigging from abrasion and snagging
- 2" braided version available for larger bundles
- Split conduit and traditional rigging-tube alternatives available
FAQ
What size is F6N150?
F6N150 is a 1.5" wrappable split braided rigging tube.
How long is F6N150?
Pro Marine lists F6N150 as a 5-foot length.
What color is it?
F6N150 is black.
Who manufactures F6N150?
F6N150 is a Pro Marine aftermarket product.
Do I have to disconnect my engine wiring to install it?
The wrappable split design allows it to be installed around an existing
rigging bundle, which can reduce the need to disconnect hoses and wiring.
What if 1.5" is too small?
Use the
F6N200 2" Wrappable Split Braided Tube
for larger bundles.
Do you also stock split conduit?
Yes. Pro Marine stocks
1.5" split conduit
and
2" split conduit
.
Do you carry traditional rigging tube?
Yes. Pro Marine stocks
2" black rigging tube
and
2" white rigging tube
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
F6N150, 1.5 inch braided rigging tube, 1-1/2 inch rigging sleeve, wrappable rigging tube, split braided tube, outboard rigging sleeve, marine cable protection, outboard wiring sleeve, 5 foot rigging tube, F6N200, SPLITTUBING-15, SPLITTUBING-2, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION
Flexible Wraparound Outboard Rigging Protection
2" Wrappable Split Braided Rigging Tube - F6N200
Pro Marine F6N200 is a 2" black wrappable split braided rigging tube supplied in a 5-foot length for protecting and organizing larger outboard wiring, hose and cable bundles.
The split wraparound design allows the sleeve to be installed around existing rigging without completely disconnecting the engine wiring, fuel hose, steering hoses or control cables.
The larger 2" size is ideal when a 1.5" braided sleeve would be too tight. Pro Marine also stocks split-conduit and traditional closed rigging-tube options for different installation styles.
Nominal Size: 2"
Length: 5 Feet
Color: Black
Style: Wrappable Split Braided Tube
Application: Universal Marine Rigging
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
What This Rigging Tube is Used For
F6N200 wraps around an existing outboard rigging bundle to help protect, organize and clean up exposed wiring, hoses and cables.
Depending on the engine and boat configuration, the sleeve may be used around:
- Engine wiring harnesses
- Battery cables
- Throttle and shift cables
- Fuel hose
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Why Choose 2" Wrappable Braided Rigging Tube?
The main advantage of a wrappable sleeve is that it can be installed around an existing engine rigging bundle instead of requiring all of the cables, hoses and harnesses to be disconnected and pulled through a closed tube.
The 2" size provides more room for larger or more complex rigging bundles and is useful when the 1.5" version would compress the components too tightly.
Common reasons to choose F6N200 include:
- Larger outboard rigging bundles
- Engines already fully connected and rigged
- Rerigging and cleanup projects
- Adding abrasion protection to exposed wiring and hoses
- Improving the appearance of an older transom installation
- Avoiding unnecessary disconnection of engine harnesses and hoses
The sleeve should contain the rigging bundle without tightly compressing fuel hose, steering hoses, wiring or control cables.
The completed bundle must still have enough flexibility for the outboard to steer fully and move through its normal trim and tilt range.
Need the 1.5" Braided Version?
Smaller 1.5" wraparound braided sleeve for more compact outboard wiring, cable and hose bundles.
If the rigging bundle fits comfortably inside 1.5", the smaller size can provide a tighter and cleaner finished installation.
View 1.5" Braided Rigging TubeSplit Conduit Rigging Tube Options
Pro Marine also stocks split conduit for customers who prefer a more traditional split protective tube instead of braided wrap.
1.5" Split Conduit - SPLITTUBING-15
Smaller split-conduit option for wrapping around compact existing rigging bundles.
View 1.5" Split Conduit
2" Split Conduit - SPLITTUBING-2
2" split-conduit option for larger existing engine wiring, hose and cable bundles.
View 2" Split ConduitTraditional 2" Rigging Tube Options
For new installations where the engine rigging can be fed through a conventional closed tube, Pro Marine stocks 2" rigging tube in black and white.
2" Black Rigging Tube - RIGTUBE-B
Traditional black 2" outboard rigging tube sold by the foot for clean new installations.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" outboard rigging tube for installations where a lighter color better matches the hull, transom or engine.
View White 2" Rigging TubeRigging Tube Style Comparison
| Style | Installation | Best Use | Sizes |
|---|---|---|---|
| Wrappable Braided Tube | Wraps around existing rigging | Flexible protection and clean cable organization | 1.5" and 2" |
| Split Conduit | Wraps around existing rigging | Repairs, rerigging and existing installations | 1.5" and 2" |
| Traditional Rigging Tube | Rigging is fed through a closed tube | New installations and finished transom rigging | 2" Black and White |
Related 2" Rigging Hardware
2" Transom Flange - TFLANGE-2
Standard transom flange for traditional 2" closed rigging-tube installations.
View Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
2" transom flange with a dedicated fuel-line port for compatible outboard rigging installations.
View Fuel Port Flange
2" Rigging Hose Union - TUNION
Joins two compatible sections of traditional 2" rigging tube for extensions or repairs.
View Rigging Hose UnionInstallation Tips
- Measure the complete cable and hose bundle before selecting sleeve size.
- Use the 2" version when 1.5" braided tubing would fit too tightly.
- Wrap the sleeve around the existing rigging rather than disconnecting the engine unnecessarily.
- Do not tightly compress fuel hose, hydraulic hoses or control cables.
- Leave sufficient slack for full steering movement.
- Check full trim and tilt travel after the sleeve is installed.
- Avoid tight bends that could strain the components inside the sleeve.
- Inspect wiring, hoses and cables for damage before covering them.
- Replace damaged components rather than using the sleeve to hide existing damage.
When Should Wrappable Rigging Tube Be Replaced?
Inspect the braided sleeve periodically along with the wiring and hoses it protects.
Replacement may be appropriate if you find:
- Torn or frayed braided material
- Heavy abrasion
- Sections that no longer stay wrapped around the bundle
- UV or environmental deterioration
- Exposed wiring, hoses or cables
- A rigging bundle that has outgrown the existing sleeve
Key Features and Benefits
- 2" wrappable split braided rigging tube
- 5-foot length
- Black finish
- Universal marine application
- Pro Marine aftermarket product
- Installs around existing engine rigging
- Provides additional room for larger cable and hose bundles
- Helps organize and protect exposed rigging
- 1.5" braided version available
- Split-conduit and traditional rigging-tube alternatives available
FAQ
What size is F6N200?
F6N200 is a 2" wrappable split braided rigging tube.
How long is F6N200?
F6N200 is supplied in a 5-foot length.
What color is it?
F6N200 is black.
What is the advantage of wrappable rigging tube?
It can be installed around existing outboard wiring, hoses and cables
without completely disconnecting the engine rigging.
When should I use the 2" size instead of 1.5"?
Use the 2" version when the rigging bundle will not fit comfortably inside
the
1.5" F6N150
.
Do you also stock split conduit?
Yes. Pro Marine stocks
1.5" split conduit
and
2" split conduit
.
Do you stock traditional closed rigging tube?
Yes. Pro Marine stocks
2" black rigging tube
and
2" white rigging tube
.
Do you carry transom rigging hardware?
Yes. Pro Marine stocks the
standard 2" transom flange
,
2" flange with fuel port
,
and
2" rigging hose union
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
F6N200, 2 inch braided rigging tube, 2 inch rigging sleeve, wrappable rigging tube, split braided tube, outboard rigging sleeve, marine cable protection, outboard wiring sleeve, 5 foot rigging tube, F6N150, SPLITTUBING-15, SPLITTUBING-2, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION
Outboard Rigging Tube Connector
2" Outboard Rigging Hose Union - TUNION
TUNION is a 2" rigging hose union designed to connect two compatible sections of marine outboard rigging tube.
It is useful when extending an existing rigging-tube run, repairing a damaged section or joining two pieces during a rerigging project without replacing the entire tube.
Pro Marine also stocks black and white 2" rigging tube, standard and fuel-port transom flanges, split conduit and wrappable braided rigging protection.
Connection Size: 2"
Application: Outboard Rigging Tube
Use: Joins Two Sections of Compatible Rigging Hose
Pro Marine Item: TUNION
What This Rigging Hose Union is Used For
The TUNION provides a simple connection point between two pieces of 2" outboard rigging tube.
Common uses include:
- Extending an existing rigging-tube run
- Joining two shorter pieces of 2" rigging hose
- Repairing a damaged section without replacing the entire tube
- Adapting an existing installation after an engine or transom change
- Rerouting or reorganizing an outboard rigging bundle
Why Use a Rigging Tube Union?
A union can make a rigging repair or modification easier when the existing tube is otherwise still in good condition.
Instead of replacing the full length of hose, the installer can use a compatible union to connect a new section where additional length or a repair is needed.
This can be especially helpful during engine repowers, steering-system changes or transom rerigging projects.
Do not position the union where it causes the rigging bundle to become rigid or creates a sharp bend.
The full rigging assembly still needs enough movement for the outboard to steer, trim and tilt without pulling on wiring, fuel hose, control cables or hydraulic steering hoses.
2" Black and White Rigging Tube
2" Black Rigging Tube - RIGTUBE-B
Black 2" outboard rigging tube sold by the foot for custom-length engine rigging installations.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" rigging tube for installations where a lighter color better matches the hull, transom or outboard.
View White 2" Rigging Tube2" Transom Flange Options
2" Transom Flange - TFLANGE-2
Standard 2" transom flange for creating a clean entry point where rigging tube passes into the boat.
View 2" Transom Flange
2" T-Flange with Fuel Port - TFLANGE-FP
Alternative 2" transom flange with a separate opening for routing the fuel hose outside the main rigging bundle.
View T-Flange with Fuel PortSplit Conduit Rigging Options
Split conduit can be wrapped around an existing outboard rigging bundle without disconnecting all of the cables and hoses.
1.5" Split Conduit - SPLITTUBING-15
Smaller split-conduit option for protecting installed wiring, hoses and cables.
View 1.5" Split Conduit
2" Split Conduit - SPLITTUBING-2
2" split conduit for larger existing rigging bundles where wraparound protection is preferred.
View 2" Split ConduitWrappable Split Braided Rigging Tube
1.5" Wrappable Braided Tube - F6N150
Flexible wraparound braided protection for smaller existing wiring and hose bundles.
View 1.5" Braided Tube
2" Wrappable Braided Tube - F6N200
Larger wraparound braided tubing for protecting existing outboard rigging without completely disconnecting the engine.
View 2" Braided TubeChoosing the Right Rigging Protection
| Product | Purpose | Best Use |
|---|---|---|
| TUNION | Joins two sections of 2" rigging tube | Extensions and repairs |
| RIGTUBE-B / RIGTUBE-W | Traditional closed rigging tube | Clean new rigging installations |
| SPLITTUBING | Split protective conduit | Existing installed rigging |
| F6N Series | Wrappable braided protection | Flexible wraparound protection |
Installation Tips
- Confirm both sections of rigging hose are compatible 2" tube.
- Cut damaged tube back to a clean section before joining if needed.
- Position the union where the rigging can still flex naturally.
- Do not place the union directly at a severe bend.
- Leave enough slack for full steering movement.
- Verify trim and tilt movement before finalizing the installation.
- Do not compress fuel hose, steering hoses or control cables inside the tube.
- Inspect the entire rigging bundle for chafe while the tube is open.
When is a Rigging Hose Union Useful?
A union is particularly useful when the existing rigging tube is still serviceable but is no longer long enough for the installation.
Examples include:
- Installing a replacement engine with a different rigging location
- Adding length after changing the transom setup
- Repairing one damaged section of tube
- Changing steering or rigging geometry
- Extending existing 2" rigging hose rather than replacing it completely
Key Features and Benefits
- Designed for 2" marine rigging tube
- Joins two compatible sections of rigging hose
- Useful for extensions and repairs
- Can reduce the need to replace an entire rigging-tube run
- Works with Pro Marine black and white 2" rigging tube options
- Standard and fuel-port transom flanges available
- Split conduit and braided rigging alternatives available
FAQ
What size rigging tube does TUNION fit?
TUNION is intended for 2" rigging hose.
What does a rigging hose union do?
It connects two compatible sections of 2" outboard rigging tube.
Can I use it to extend my existing rigging tube?
Yes. Extending an existing 2" rigging-tube run is one of the primary uses
for the union.
Can it be used to repair damaged rigging tube?
It can be useful when the damaged section can be removed and replaced with
a new compatible section of 2" tube.
Do you stock 2" rigging tube?
Yes. Pro Marine stocks
black 2" rigging tube
and
white 2" rigging tube
.
Do you stock the transom flanges too?
Yes. Pro Marine stocks the
standard 2" transom flange
and the
2" T-flange with fuel port
.
What if I do not want to disconnect the existing engine rigging?
Consider
2" split conduit
or
2" wrappable braided tubing
,
which can be installed around an existing bundle.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
TUNION, 2 inch rigging hose union, rigging tube connector, outboard rigging union, marine rigging connector, 2 inch hose union, outboard cable tube connector, rigging tube extension, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, SPLITTUBING-15, SPLITTUBING-2, F6N150, F6N200
Outboard Transom Rigging Connection
TH Marine 2" T-Flange with Fuel Port - TFLANGE-FP
TFLANGE-FP is a TH Marine universal 2" transom rigging flange with a separate fuel-line port. It provides a clean transition where the outboard rigging bundle enters the boat while allowing the fuel hose to be routed independently from the main 2" rigging tube.
Separating the fuel line from the main cable and hose bundle can simplify routing and help keep the transom installation organized.
Pro Marine also stocks black and white 2" rigging tube, a standard transom flange without the fuel port, a 2" rigging hose union, split conduit and wrappable braided rigging protection.
Rigging Tube Size: 2"
Fuel Port: Yes
Application: Universal Outboard Rigging
Manufacturer: TH Marine
Manufacturer Item #: RFFHP-1-DP
Pro Marine Item: TFLANGE-FP
What This T-Flange is Used For
The TFLANGE-FP mounts at the transom to create a finished connection point for a 2" outboard rigging tube.
The additional fuel-line port allows the fuel hose to enter the boat separately instead of sharing the main rigging tube with all of the other engine components.
Depending on the outboard installation, the main rigging tube may contain:
- Engine wiring harnesses
- Battery cables
- Throttle and shift control cables
- Hydraulic steering hoses
- Gauge and network wiring
- Trim wiring
- Accessory wiring
Why Use a Separate Fuel Hose Port?
A separate fuel-line opening gives the installer another routing option rather than forcing every hose and cable through the same 2" rigging tube.
This can be especially useful when:
- The main rigging bundle is already crowded
- The fuel hose needs a different routing path
- You want easier access to the fuel line for future service
- You want to keep the fuel hose separated from wiring and control cables
- The existing boat layout already routes the fuel hose separately
A 2" rigging connection should have enough room for the hoses and cables to pass through without crushing or sharply bending them.
If the bundle is too large, consider separating the fuel hose through the dedicated fuel port or using another rigging method rather than compressing steering hoses, control cables or wiring.
2" Black and White Rigging Tube
2" Black Rigging Tube - RIGTUBE-B
Black 2" outboard rigging tube sold by the foot for protecting and organizing the engine rigging bundle.
View Black 2" Rigging Tube
2" White Rigging Tube - RIGTUBE-W
White 2" outboard rigging tube for installations where a lighter color better matches the hull, transom or engine.
View White 2" Rigging TubeStandard 2" Transom Flange
If you do not need a separate fuel-line port, Pro Marine also stocks a standard 2" transom flange for compatible rigging-tube installations.
View Standard 2" Transom Flange2" Rigging Hose Union
Universal 2" rigging hose union for joining compatible sections of 2" rigging tube.
Useful when extending an existing rigging run or joining two sections during a rerigging project.
View 2" Rigging Hose UnionOther Rigging Protection Options
When the engine is already rigged and feeding all of the cables through traditional closed tubing would be difficult, Pro Marine also stocks split-conduit and wrappable braided options.
Split Conduit Tubing
1.5" Split Conduit - SPLITTUBING-15
Wraparound split conduit for protecting smaller existing rigging bundles.
View 1.5" Split Conduit
2" Split Conduit - SPLITTUBING-2
Larger split conduit for existing outboard rigging bundles that benefit from a wraparound installation.
View 2" Split ConduitWrappable Split Braided Tube
1.5" Wrappable Braided Tube - F6N150
Flexible wraparound braided protection for smaller installed cable and hose bundles.
View 1.5" Braided Tube
2" Wrappable Braided Tube - F6N200
Larger 2" wraparound braided option for protecting an existing outboard rigging bundle without fully disconnecting the engine.
View 2" Braided TubeChoosing a Rigging Flange
| Flange | Rigging Size | Fuel Port | Best Use |
|---|---|---|---|
| TFLANGE-FP | 2" | Yes | Rigging installations where the fuel hose is routed separately |
| TFLANGE-2 | 2" | No | Standard 2" rigging-tube transom connection |
Installation Tips
- Verify the rigging tube is 2" before ordering the flange.
- Plan the fuel-hose path before cutting or drilling the transom area.
- Leave adequate room for full engine steering movement.
- Make sure trim and tilt movement does not pull on the fuel hose or rigging bundle.
- Avoid sharp bends in fuel hose, steering hose and control cables.
- Support the rigging bundle so its weight does not pull excessively on the flange.
- Inspect the transom entry point for chafe or sharp edges.
- Seal and install the flange according to the boat and component manufacturer's requirements.
Key Features and Benefits
- 2" outboard rigging flange
- Separate fuel-line port
- Universal marine application
- TH Marine brand
- Manufacturer item RFFHP-1-DP
- Provides a finished transom rigging entry point
- Allows fuel hose to be routed outside the main rigging bundle
- Compatible with Pro Marine 2" black and white rigging tube options
- Standard flange without fuel port also available
- 2" rigging hose union available
FAQ
What size rigging tube does TFLANGE-FP use?
TFLANGE-FP is intended for a 2" rigging tube.
Who makes TFLANGE-FP?
It is manufactured by TH Marine. The manufacturer item
number is RFFHP-1-DP.
What is the extra port used for?
The additional port allows the engine fuel hose to be routed separately
from the main 2" rigging bundle.
Do I have to route the fuel hose separately?
The flange provides that option. Follow the layout and routing requirements
of the specific boat and outboard installation.
Do you stock 2" rigging tube?
Yes. Pro Marine stocks
black 2" rigging tube
and
white 2" rigging tube
.
Do you stock a flange without the fuel port?
Yes. The
TFLANGE-2 2" Transom Flange
is the standard option.
Can I join two pieces of 2" rigging tube?
Yes. Pro Marine stocks the
TUNION 2" Rigging Hose Union
for compatible installations.
What if the engine is already rigged?
Pro Marine also stocks split conduit and wrappable braided tubing that
can be installed around an existing cable and hose bundle.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
TFLANGE-FP, RFFHP-1-DP, TH Marine rigging flange, 2 inch rigging flange, fuel port flange, outboard transom flange, outboard fuel hose port, rigging tube flange, transom rigging fitting, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TUNION, SPLITTUBING-15, SPLITTUBING-2, F6N150, F6N200
