1.5" Wrappable Split Braided Rigging Tube - F6N150

What This Rigging Tube is Used For

F6N150 wraps around an existing marine rigging bundle to help organize and protect wiring, hoses and cables.

Depending on the boat and engine setup, it may be used around:

• Engine wiring harnesses
• Battery cables
• Control cables
• Fuel hose
• Hydraulic steering hoses
• Gauge and network wiring
• Trim wiring
• Accessory wiring

Why Choose Wrappable Braided Rigging Tube?

The main advantage of a wrappable split sleeve is that the engine does not have to be completely disconnected just to install the protective covering.

The sleeve opens along its length, wraps around the existing bundle and provides a cleaner finished appearance while helping reduce direct abrasion and snagging.

It is especially useful when:

• The engine is already fully rigged
• You want to clean up exposed wiring and hoses
• Traditional closed rigging tube would be difficult to install
• You want flexible protection around an existing bundle
• You are repairing or rerouting an older transom installation

Need the 2" Braided Version?

2" Wrappable Split Braided Tube - F6N200

Larger 2" wraparound braided rigging tube for cable and hose bundles that need more room than the 1.5" F6N150 provides.

View 2" Braided Rigging Tube

Split Conduit Rigging Tube Options

If you prefer a split conduit style instead of braided wrap, Pro Marine stocks both 1.5" and 2" split-conduit options.

1.5" Split Conduit - SPLITTUBING-15

1.5" split-conduit alternative for wrapping around an existing outboard rigging bundle.

View 1.5" Split Conduit

2" Split Conduit - SPLITTUBING-2

Larger split-conduit option for bulkier engine wiring and hose bundles.

View 2" Split Conduit

Traditional 2" Rigging Tube Options

For new installations where the cables and hoses can be fed through a closed tube, Pro Marine also stocks traditional 2" marine rigging tube.

2" Black Rigging Tube - RIGTUBE-B

Traditional black 2" outboard rigging tube sold by the foot for clean new or fully accessible installations.

View Black 2" Rigging Tube

2" White Rigging Tube - RIGTUBE-W

White 2" traditional rigging tube for installations where a lighter color better matches the hull, transom or outboard.

View White 2" Rigging Tube

Which Rigging Tube Style Should I Use?

Related Rigging Hardware

2" Transom Flange - TFLANGE-2

Standard flange for traditional 2" rigging-tube transom installations.

View Transom Flange

2" T-Flange with Fuel Port - TFLANGE-FP

Transom flange with a separate fuel-hose port for compatible outboard rigging installations.

View Fuel Port Flange

2" Rigging Hose Union - TUNION

Connects two compatible sections of traditional 2" rigging hose for extensions and repairs.

View Rigging Hose Union

Installation Tips

• Measure the complete rigging bundle before choosing the sleeve size.
• Wrap the braided sleeve around the existing bundle instead of disconnecting the engine rigging.
• Do not tightly compress fuel hose, steering hoses or control cables.
• Leave sufficient slack for full outboard steering movement.
• Check full trim and tilt travel before finalizing the installation.
• Avoid excessively tight bends in the finished rigging bundle.
• Inspect the wiring and hoses for existing damage before covering them.
• Replace damaged wiring or hoses rather than using the sleeve to conceal damage.

When Should a Wrappable Rigging Sleeve Be Replaced?

Inspect the braided tube whenever the engine rigging is serviced.

Replacement may be needed if you find:

• Torn or heavily worn braided material
• Severe abrasion
• Sections that no longer stay wrapped around the bundle
• Exposed wiring or hoses
• A rigging bundle that has become too large for the 1.5" sleeve

Key Features and Benefits

• 1.5" wrappable split braided rigging tube
• 5-foot length
• Black finish
• Universal marine application
• Pro Marine aftermarket product
• Installs around existing engine rigging
• Helps organize wiring, cables and hoses
• Helps protect exposed rigging from abrasion and snagging
• 2" braided version available for larger bundles
• Split conduit and traditional rigging-tube alternatives available

FAQ

What size is F6N150?
F6N150 is a 1.5" wrappable split braided rigging tube.

How long is F6N150?
Pro Marine lists F6N150 as a 5-foot length.

What color is it?
F6N150 is black.

Who manufactures F6N150?
F6N150 is a Pro Marine aftermarket product.

Do I have to disconnect my engine wiring to install it?
The wrappable split design allows it to be installed around an existing rigging bundle, which can reduce the need to disconnect hoses and wiring.

What if 1.5" is too small?
Use the F6N200 2" Wrappable Split Braided Tube for larger bundles.

Do you also stock split conduit?
Yes. Pro Marine stocks 1.5" split conduit and 2" split conduit .

Do you carry traditional rigging tube?
Yes. Pro Marine stocks 2" black rigging tube and 2" white rigging tube .

Searchable Terms

F6N150, 1.5 inch braided rigging tube, 1-1/2 inch rigging sleeve, wrappable rigging tube, split braided tube, outboard rigging sleeve, marine cable protection, outboard wiring sleeve, 5 foot rigging tube, F6N200, SPLITTUBING-15, SPLITTUBING-2, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION