2" Black Outboard Rigging Tube Transom Flange - TFLANGE-2

What This Transom Flange is Used For

TFLANGE-2 is used where a 2" outboard rigging tube transitions through the boat or transom rigging area.

Instead of allowing the rigging hose to simply pass through an unfinished opening, the flange provides a defined connection point for the tube.

Depending on the engine installation, the rigging tube may organize:

• Engine wiring harnesses
• Battery cables
• Throttle and shift cables
• Fuel hose
• Hydraulic steering hoses
• Gauge and network wiring
• Trim and accessory wiring
• Other outboard engine hoses and cables

Why Use a Rigging Tube Flange?

The transom entry point is one of the most visible parts of an outboard rigging installation. A flange helps create a cleaner and more organized transition between the rigging tube and the boat.

Benefits include:

• Creates a cleaner finished transom appearance
• Provides a defined entry point for 2" rigging tube
• Helps organize the engine rigging bundle
• Reduces direct contact between the tube and an unfinished opening
• Makes future rigging inspection and service easier

2" Black and White Rigging Tube

2" Black Rigging Tube - RIGTUBE-B

Black 2" marine rigging tube sold by the foot for organizing and protecting outboard engine wiring, hoses and cables.

View Black 2" Rigging Tube

2" White Rigging Tube - RIGTUBE-W

White 2" rigging tube for boats where a lighter color better matches the hull, transom or engine installation.

View White 2" Rigging Tube

Need a Separate Fuel Hose Port?

2" T-Flange with Fuel Port - TFLANGE-FP

If the installation benefits from routing the fuel hose separately, Pro Marine also stocks a TH Marine 2" T-flange with a dedicated fuel port.

This can reduce crowding inside the main rigging tube and gives the installer another routing option for the fuel line.

View T-Flange with Fuel Port

2" Rigging Hose Union

2" Rigging Hose Union - TUNION

The universal 2" rigging hose union joins two compatible sections of 2" rigging tube.

Useful when extending an existing rigging run or repairing a rigging system without replacing the entire length of hose.

View 2" Rigging Hose Union

Split Conduit Rigging Options

If the engine is already rigged and you do not want to disconnect every cable and hose, split conduit can be wrapped around an existing bundle.

1.5" Split Conduit - SPLITTUBING-15

Smaller split conduit for wrapping and protecting existing outboard wiring and hose bundles.

View 1.5" Split Conduit

2" Split Conduit - SPLITTUBING-2

2" black split conduit for larger installed rigging bundles where a wraparound tube is easier to install than closed rigging hose.

View 2" Split Conduit

Wrappable Split Braided Rigging Tube

1.5" Wrappable Split Braided Tube - F6N150

Flexible wraparound braided protection for smaller existing engine wiring, hose and cable bundles.

View 1.5" Braided Tube

2" Wrappable Split Braided Tube - F6N200

Larger 2" wraparound braided option for protecting an existing rigging bundle without fully disconnecting the engine.

View 2" Braided Tube

Standard Flange vs. Fuel Port Flange

Installation Tips

• Verify the rigging tube is 2" before selecting the flange.
• Plan the rigging path before drilling or modifying the transom area.
• Leave sufficient slack for full engine steering movement.
• Make sure trim and tilt movement does not pull against the flange.
• Avoid sharp bends in steering hoses, fuel hose and control cables.
• Keep wiring away from sharp edges at the transom opening.
• Support the rigging bundle so excessive weight is not placed on the flange.
• Install and seal the flange according to the requirements of the boat and installation.

Key Features and Benefits

• 2" inside-diameter rigging connection
• Black transom flange
• MPI Products brand
• Designed for compatible outboard rigging installations
• Provides a finished transom entry for rigging tube
• Black and white 2" rigging tube available
• Fuel-port flange alternative available
• 2" rigging hose union available
• Split conduit and braided wrap alternatives available

FAQ

What size rigging tube fits TFLANGE-2?
TFLANGE-2 is designed for a 2" rigging tube connection.

What color is TFLANGE-2?
Pro Marine lists TFLANGE-2 as a black transom flange.

Who manufactures TFLANGE-2?
TFLANGE-2 is manufactured by MPI Products.

What is a rigging tube flange used for?
It provides a clean connection point where outboard rigging tube enters the boat or transom rigging area.

Do you stock 2" rigging tube?
Yes. Pro Marine stocks 2" black rigging tube and 2" white rigging tube .

Do you carry a flange with a separate fuel port?
Yes. Pro Marine stocks the TFLANGE-FP 2" T-Flange with Fuel Port .

Can two pieces of 2" rigging tube be connected?
Yes. The TUNION 2" Rigging Hose Union is available for compatible installations.

What if the engine is already fully rigged?
Split conduit and wrappable braided tubing can be installed around an existing rigging bundle without feeding every hose and cable through a closed tube.

Searchable Terms

TFLANGE-2, 2 inch transom flange, 2 inch rigging flange, outboard rigging flange, black transom flange, MPI transom flange, marine rigging tube flange, outboard cable flange, rigging hose flange, RIGTUBE-B, RIGTUBE-W, TFLANGE-FP, TUNION, SPLITTUBING-15, SPLITTUBING-2, F6N150, F6N200