2" Wrappable Split Braided Rigging Tube - F6N200

What This Rigging Tube is Used For

F6N200 wraps around an existing outboard rigging bundle to help protect, organize and clean up exposed wiring, hoses and cables.

Depending on the engine and boat configuration, the sleeve may be used around:

• Engine wiring harnesses
• Battery cables
• Throttle and shift cables
• Fuel hose
• Hydraulic steering hoses
• Gauge and network wiring
• Trim wiring
• Accessory wiring

Why Choose 2" Wrappable Braided Rigging Tube?

The main advantage of a wrappable sleeve is that it can be installed around an existing engine rigging bundle instead of requiring all of the cables, hoses and harnesses to be disconnected and pulled through a closed tube.

The 2" size provides more room for larger or more complex rigging bundles and is useful when the 1.5" version would compress the components too tightly.

Common reasons to choose F6N200 include:

• Larger outboard rigging bundles
• Engines already fully connected and rigged
• Rerigging and cleanup projects
• Adding abrasion protection to exposed wiring and hoses
• Improving the appearance of an older transom installation
• Avoiding unnecessary disconnection of engine harnesses and hoses

Need the 1.5" Braided Version?

1.5" Wrappable Split Braided Tube - F6N150

Smaller 1.5" wraparound braided sleeve for more compact outboard wiring, cable and hose bundles.

If the rigging bundle fits comfortably inside 1.5", the smaller size can provide a tighter and cleaner finished installation.

View 1.5" Braided Rigging Tube

Split Conduit Rigging Tube Options

Pro Marine also stocks split conduit for customers who prefer a more traditional split protective tube instead of braided wrap.

1.5" Split Conduit - SPLITTUBING-15

Smaller split-conduit option for wrapping around compact existing rigging bundles.

View 1.5" Split Conduit

2" Split Conduit - SPLITTUBING-2

2" split-conduit option for larger existing engine wiring, hose and cable bundles.

View 2" Split Conduit

Traditional 2" Rigging Tube Options

For new installations where the engine rigging can be fed through a conventional closed tube, Pro Marine stocks 2" rigging tube in black and white.

2" Black Rigging Tube - RIGTUBE-B

Traditional black 2" outboard rigging tube sold by the foot for clean new installations.

View Black 2" Rigging Tube

2" White Rigging Tube - RIGTUBE-W

White 2" outboard rigging tube for installations where a lighter color better matches the hull, transom or engine.

View White 2" Rigging Tube

Rigging Tube Style Comparison

Related 2" Rigging Hardware

2" Transom Flange - TFLANGE-2

Standard transom flange for traditional 2" closed rigging-tube installations.

View Transom Flange

2" T-Flange with Fuel Port - TFLANGE-FP

2" transom flange with a dedicated fuel-line port for compatible outboard rigging installations.

View Fuel Port Flange

2" Rigging Hose Union - TUNION

Joins two compatible sections of traditional 2" rigging tube for extensions or repairs.

View Rigging Hose Union

Installation Tips

• Measure the complete cable and hose bundle before selecting sleeve size.
• Use the 2" version when 1.5" braided tubing would fit too tightly.
• Wrap the sleeve around the existing rigging rather than disconnecting the engine unnecessarily.
• Do not tightly compress fuel hose, hydraulic hoses or control cables.
• Leave sufficient slack for full steering movement.
• Check full trim and tilt travel after the sleeve is installed.
• Avoid tight bends that could strain the components inside the sleeve.
• Inspect wiring, hoses and cables for damage before covering them.
• Replace damaged components rather than using the sleeve to hide existing damage.

When Should Wrappable Rigging Tube Be Replaced?

Inspect the braided sleeve periodically along with the wiring and hoses it protects.

Replacement may be appropriate if you find:

• Torn or frayed braided material
• Heavy abrasion
• Sections that no longer stay wrapped around the bundle
• UV or environmental deterioration
• Exposed wiring, hoses or cables
• A rigging bundle that has outgrown the existing sleeve

Key Features and Benefits

• 2" wrappable split braided rigging tube
• 5-foot length
• Black finish
• Universal marine application
• Pro Marine aftermarket product
• Installs around existing engine rigging
• Provides additional room for larger cable and hose bundles
• Helps organize and protect exposed rigging
• 1.5" braided version available
• Split-conduit and traditional rigging-tube alternatives available

FAQ

What size is F6N200?
F6N200 is a 2" wrappable split braided rigging tube.

How long is F6N200?
F6N200 is supplied in a 5-foot length.

What color is it?
F6N200 is black.

What is the advantage of wrappable rigging tube?
It can be installed around existing outboard wiring, hoses and cables without completely disconnecting the engine rigging.

When should I use the 2" size instead of 1.5"?
Use the 2" version when the rigging bundle will not fit comfortably inside the 1.5" F6N150 .

Do you also stock split conduit?
Yes. Pro Marine stocks 1.5" split conduit and 2" split conduit .

Do you stock traditional closed rigging tube?
Yes. Pro Marine stocks 2" black rigging tube and 2" white rigging tube .

Do you carry transom rigging hardware?
Yes. Pro Marine stocks the standard 2" transom flange , 2" flange with fuel port , and 2" rigging hose union .

Searchable Terms

F6N200, 2 inch braided rigging tube, 2 inch rigging sleeve, wrappable rigging tube, split braided tube, outboard rigging sleeve, marine cable protection, outboard wiring sleeve, 5 foot rigging tube, F6N150, SPLITTUBING-15, SPLITTUBING-2, RIGTUBE-B, RIGTUBE-W, TFLANGE-2, TFLANGE-FP, TUNION