Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2089 - 2100 of 2777 ▶ ▶|
View:
Pro Series Hydraulic Steering Cylinder for 700HSTEER Systems

Pro Series Hydraulic Steering Cylinder

Pro Marine 700HSTEER-CYL Hydraulic Steering Cylinder

The Pro Marine 700HSTEER-CYL Hydraulic Steering Cylinder is a Pro Series hydraulic steering ram designed for high-performance marine outboard steering applications.

This steering cylinder is designed for use with the Pro Marine 700HSTEER hydraulic steering system and helps deliver smooth, controlled steering response for demanding marine applications.

What a Hydraulic Steering Cylinder Does

The hydraulic steering cylinder is the component mounted at the outboard engine that physically turns the engine when hydraulic pressure is applied from the helm pump.

As the steering wheel is turned, hydraulic fluid moves through the steering hoses into the cylinder, extending or retracting the steering ram to control engine direction. Steering cylinder sizing and construction play a major role in steering feel, control, and system durability.

Pro Tip: Hydraulic steering cylinders should always be matched with compatible helm pumps, hoses, fittings, and steering system components to ensure proper steering response and safe operation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
High-Performance Outboards Pro Series hydraulic steering cylinder applications
Offshore Boats Controlled hydraulic steering in demanding water conditions
Performance Setups Responsive steering control for higher-speed operation
Repower Projects Replacement hydraulic steering cylinder installations
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

700HSTEER Steering System

Pair this cylinder with the complete Pro Marine 700HSTEER hydraulic steering system.

View 700HSTEER Steering System

Hydraulic Hoses

Select the proper hydraulic steering hose length for your boat layout, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

End Cap Kit

Service the steering cylinder using the compatible 700-ENDCAP replacement kit.

View 700-ENDCAP

Hydraulic Steering Fluid

Use quality hydraulic steering fluid during installation, filling, and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Key Features and Benefits

  • Pro Series hydraulic steering cylinder design
  • Designed for the Pro Marine 700HSTEER system
  • Helps provide smooth and controlled steering response
  • Built for demanding marine steering applications
  • Good choice for performance and offshore boats
  • Compatible service parts available from Pro Marine
  • Designed for hydraulic outboard steering systems
  • Aftermarket Pro Marine steering component

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering cylinder
  • Part Number: 700HSTEER-CYL
  • OEM or Aftermarket: Aftermarket
  • Manufacturer: Pro Marine
  • Connection Type: Hydraulic steering hose fittings
  • Typical Use: High-performance marine steering systems
  • Compatible System: Pro Marine 700HSTEER
  • Related Components: Helm pumps, hydraulic hoses, fittings, steering fluid, and bleed kits

FAQ

What does the 700HSTEER-CYL steering cylinder do?
The steering cylinder converts hydraulic pressure into steering movement that turns the outboard engine.

What steering system is this cylinder designed for?
This cylinder is designed for the Pro Marine 700HSTEER hydraulic steering system.

Is this an OEM or aftermarket steering cylinder?
This product is listed as an aftermarket Pro Marine steering component.

Can this cylinder be serviced?
Yes. Compatible service components including the 700-ENDCAP kit are available for maintenance and repairs.

Is this cylinder suitable for performance boats?
Yes. The 700HSTEER-CYL is designed for demanding hydraulic steering applications including performance and offshore boats.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

700HSTEER-CYL, hydraulic steering cylinder, Pro Marine steering cylinder, Pro Series steering ram, outboard steering cylinder, marine hydraulic steering cylinder, offshore steering cylinder, performance steering ram, aftermarket steering cylinder, 700HSTEER cylinder

Item#:
700HSTEER-CYL
Manufacturer:
Pro Marine
Available:
In Stock
 
Heavy
Your Price:
931.54
Each
Pro Series Hydraulic Steering System for High-Performance Outboards

Pro Series Hydraulic Steering System

Pro Marine 700HSTEER Hydraulic Steering System

The Pro Marine 700HSTEER Hydraulic Steering System is a Pro Series aftermarket hydraulic steering kit designed for high-performance marine outboard steering applications.

This Pro Marine hydraulic steering system is listed as a complete kit and is designed to provide smooth, controlled steering response for demanding boat setups.

What a Pro Series Hydraulic Steering System Does

A hydraulic steering system uses a helm pump, hydraulic fluid, steering hoses, fittings, and a steering cylinder to turn the outboard engine. When the steering wheel is turned, hydraulic pressure moves fluid through the system and operates the cylinder at the engine.

The 700HSTEER Pro Series system is built for applications where stronger steering control, smooth handling, and reliable hydraulic response are important.

Pro Tip: Pro Series steering systems should be matched carefully to the boat setup, horsepower, engine configuration, hose length, fittings, and steering response required by the customer.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
High-Performance Outboards Pro Series hydraulic steering applications
Offshore Boats Controlled hydraulic steering for demanding water conditions
Performance Setups Responsive steering control for higher-speed operation
Repower Projects Upgrade from cable steering or older hydraulic steering systems
Marine Repair Shops Professional hydraulic steering replacement and installation work

Complete or Service Your Steering System

Hydraulic Hoses

Choose the correct hydraulic steering hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Hydraulic Fluid

Use quality hydraulic steering fluid when filling and bleeding your hydraulic steering system.

View PRO-OIL15 Hydraulic Fluid

Pro Series End Cap Kit

Service the 700-HSTEER-CYL steering cylinder with the correct replacement end cap kit.

View 700-ENDCAP

Hydraulic Steering Fittings

Use compatible Pro Marine hydraulic steering fittings when servicing or completing the steering system.

View HLO14BOS 90° Fitting

Key Features and Benefits

  • Pro Series hydraulic steering system
  • Listed as a complete aftermarket steering kit
  • Designed for demanding marine outboard steering applications
  • Helps provide smooth, controlled hydraulic steering response
  • Good choice for performance boats, offshore boats, and repowers
  • Helps reduce steering effort compared to cable steering
  • Compatible service parts available from Pro Marine
  • Oversized shipping item

System Function and Connections

  • System Type: Pro Series hydraulic outboard steering
  • Component Type: Complete hydraulic steering kit
  • Part Number: 700HSTEER
  • OEM or Aftermarket: Aftermarket
  • Manufacturer: Pro Marine
  • Connection Type: Hydraulic steering hose circuit
  • Typical Use: High-performance marine outboard steering systems
  • Related Components: Hydraulic hoses, steering fluid, fittings, cylinder service parts, and bleed tools

FAQ

What is the Pro Marine 700HSTEER system?
It is a Pro Series aftermarket hydraulic steering system listed as a complete kit for marine steering applications.

What type of steering system is this?
This is a hydraulic outboard steering system designed to use hydraulic pressure to operate the steering cylinder.

Is this an OEM or aftermarket steering system?
This product is listed as an aftermarket Pro Marine hydraulic steering system.

What parts are commonly serviced with this system?
Common related service parts include hydraulic hoses, steering fluid, fittings, bleed tools, and the 700-ENDCAP cylinder end cap kit.

Is this item oversized?
Yes. The product page lists this steering system as an oversized shipping item.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

700HSTEER, Pro Marine 700HSTEER, Pro Series hydraulic steering, hydraulic steering system, complete hydraulic steering kit, aftermarket steering system, outboard hydraulic steering, performance boat steering, offshore hydraulic steering, Pro Marine steering kit

Item#:
700HSTEER
Manufacturer:
Pro Marine
Available:
In Stock
 
Oversized Shipping
Your Price:
1450.00
Each
Wiseco 4-Stroke 94mm Bore
Item#:
9400XX
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
35.09
Each
Mecahnical Helm Bezel Kit
Item#:
BEZEL20
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
01/05/2027
Your Price:
20.79
Each
Mechanical Helm Bezel Kit
Item#:
BEZEL90
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
01/05/2027
Your Price:
20.79
Each
Universal 7/8" x 12" For Dual Steering
Item#:
96400
Cross Reference#:
96400
Manufacturer Item:
96400
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
87.99
Each
Genuine Yamaha EU0-61461-30-00 Cable Joint Ball

Genuine Yamaha OEM Steering & Control Cable Joint Ball

Yamaha OEM Shaft Ball Joint EU0-61461-30-00

The Yamaha OEM EU0-61461-30-00 Shaft Ball Joint is a genuine Yamaha replacement component used in many Yamaha steering cable, throttle cable, shift cable, and marine control systems.

This genuine Yamaha OEM part supersedes EU0-U1461-30-00 and is commonly found on Yamaha WaveRunner personal watercraft, Yamaha jet boats, and Yamaha marine steering and control cable assemblies.

Compatible Applications

Brand Application Type Common Model Families System Type
Yamaha WaveRunner / PWC SuperJet, WaveRunner, VXR, FX1, Raider, Venture, SUV1200, XLT1200 Steering & Control Cables
Yamaha Jet Boats AR210, AR230, AR240, SX210, SX230, SX240, 212X, 242 Limited Shift & Steering Systems
Yamaha FSH Sport Boats 190 FSH, 210 FSH, 212 FSH Control Cable Assemblies
Important Fitment Information:

Yamaha OEM number EU0-U1461-30-00 has been superseded by EU0-61461-30-00.

This OEM Yamaha shaft ball joint is used across hundreds of Yamaha steering and control cable assemblies covering many Yamaha WaveRunner, PWC, jet boat, and sport boat applications.

Always verify your OEM number and cable assembly before ordering.

OEM Part Numbers & Cross References

Part Type Part Number
Yamaha OEM EU0-61461-30-00
Yamaha OEM Superseded Number EU0-U1461-30-00

Aftermarket Alternative

Looking for a more affordable aftermarket replacement option?

Pro Marine Aftermarket Shaft Joint Ball 3-12-EU06146

The Pro Marine aftermarket version replaces the same Yamaha OEM numbers and is a cost-effective replacement for many Yamaha steering and control cable applications.

What This Part is Used For

The Yamaha OEM shaft ball joint is used as a linkage connection point within Yamaha steering cable systems, throttle cable systems, shift cable assemblies, and marine control systems.

This component allows smooth articulation and movement between the cable assembly and steering or control mechanisms while maintaining secure operation in marine environments.

Damaged or worn cable joint components can contribute to loose steering, poor throttle response, difficult shifting, or unreliable control system operation.

Key Features & Benefits

  • Genuine Yamaha OEM component
  • Current Yamaha OEM number EU0-61461-30-00
  • Supersedes Yamaha EU0-U1461-30-00
  • Used in Yamaha steering and control cable systems
  • Fits many Yamaha WaveRunner and PWC applications
  • Fits many Yamaha jet boat applications
  • Used in steering, shift, and throttle cable assemblies
  • OEM factory Yamaha fit and quality
  • Aftermarket Pro Marine alternative linked above

Part Details

  • Part Number: EU0-61461-30-00
  • Superseded Number: EU0-U1461-30-00
  • Part Type: Shaft Ball Joint
  • Application: Yamaha Steering & Control Cable Systems
  • Manufacturer: Yamaha OEM

FAQ

What OEM number does this replace?
EU0-61461-30-00 supersedes Yamaha OEM number EU0-U1461-30-00.

What systems use this shaft ball joint?
This part is commonly used in Yamaha steering cable, shift cable, throttle cable, and marine control systems.

Does this fit Yamaha WaveRunner models?
Yes. This OEM Yamaha part is used across many Yamaha WaveRunner and personal watercraft applications.

Does this fit Yamaha jet boats?
Yes. This shaft ball joint is also used on many Yamaha jet boat steering and control systems.

Is there a less expensive aftermarket option?
Yes. The Pro Marine aftermarket replacement version is linked above.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on qualifying orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST typically ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with fitment or ordering?
Contact Us
Phone: 941-721-3000


Searchable Terms

EU0-61461-30-00, EU0-U1461-30-00, Yamaha OEM shaft ball joint, Yamaha steering cable joint, Yamaha steering cable end, Yamaha throttle cable joint, Yamaha shift cable end, Yamaha control cable connector, Yamaha jet boat steering cable, Yamaha WaveRunner steering cable, Yamaha PWC steering cable, Yamaha SuperJet steering parts, Yamaha AR240 steering cable, Yamaha SX230 steering system, Yamaha marine cable linkage, Yamaha steering linkage joint, Yamaha cable ball joint, Yamaha WaveRunner cable end, genuine Yamaha steering joint, Yamaha OEM marine control cable part, 3-12-EU06146 aftermarket alternative

Item#:
EU0-61461-30-00
Cross Reference#:
EU0-U1461-30-00
EU0-61461-30-00
Manufacturer Item:
EU0-61461-30-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
67.49
Each
Johnson Evinrude Mercury
Item#:
18-2446
Manufacturer:
Sierra
Available:
In Stock
Your Price:
41.89
Each
Klotz 2 Stroke (1 gallon) TC-W3
Item#:
KL-333
Manufacturer Item:
KL-333
Manufacturer:
Klotz
Available:
In Stock
Your Price:
93.53
Each
Yamaha 4-250HP 1984 & Up 2 & 4 Stroke Suzuki Waverunner
Item#:
48345P
Cross Reference#:
67275-94300
67275-95600
701-48345-30-00
703-48345-00-00
703-48345-01-00
Manufacturer Item:
703-48345-01-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.92
Each
Item#:
F002
Cross Reference#:
848998A1
Manufacturer Item:
848998A1
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
73.98
Each
Item#:
F001
Cross Reference#:
848703A1
Manufacturer Item:
848703A1
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
03/23/2027
Your Price:
60.49
Each
|◀ ◀ 2089 - 2100 of 2777 ▶ ▶|
View: