Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2197 - 2208 of 2777 ▶ ▶|
View:
Item#:
2-38
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
9.00
5 PACK
Item#:
6-14
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.02
5 PACK
Item#:
6-56
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.02
5 PACK
Universal 20mm Wristpin
Item#:
CW20
Cross Reference#:
420845100
Manufacturer Item:
290845100
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
2.99
Each
Wiseco
Item#:
CW22
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
2.99
Each
Johnson 20-35hp Mecury 75-115hp EFI Yamaha 75-115hp Mercruiser Seadoo
Mercury
75hp EFi
80hp EFI
90hp EFI  
100hp EFI
115hp EFi 

Mercruiser 
215
225
250
255
270
300
325
350
370
390
4.3L
5.0L
6.2L

Johnson / Evinrude 
20hp 1990-1997
25hp 1990-2005
28hp 1990-1996
30hp 1990-2005
25hp 1990-1991 

Yamaha 
75hp 2003-2022
80hp 1999-2003
90hp 2003-2022
100hp 1999-2003
115hp 2000-2022
1.8L 115hp SHO 2015-2021 
150hp 2004-2022 

Seadoo 
1503
1630
Item#:
4255
Cross Reference#:
18-7146
290631300
420631300
47632
554545
777950
8M0050719
804255
81220
864701
9-76539
93210-29198-00
93210-30682-00
Manufacturer Item:
804255
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.29
Each
Type III Bare Copper Strand
Item#:
4B18
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
24.63
Each
Transparent 1/8" Tygon Bleed Line for Marine and PWC Applications

Transparent Tygon Bleed Hose

1/8" Tygon Bleed Hose - 10ft Length

Pro Marine Item 259 is transparent 1/8" Tygon bleed hose supplied in a 10-foot length. It is used in compatible marine and PWC applications requiring small-diameter bleed line.

The transparent construction makes it easy to visually inspect fluid inside the hose, which is especially useful when servicing bleed, oil-related or other small fluid-line circuits.

Pro Marine also stocks several other Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare the available options.

1/8" Tygon Bleed Hose - Item 259

Inside Diameter: 1/8"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: Bleed / Small Fluid Line
Item Number: 259

What This Tygon Bleed Hose is Used For

Item 259 is intended for small-diameter marine applications requiring 1/8" transparent Tygon bleed hose.

Small bleed lines can become brittle, cracked, loose or damaged over time. Replacing deteriorated tubing helps maintain proper fluid routing and system operation.

Always verify the required inside diameter and application before replacing an existing hose.

Why Use Transparent Bleed Hose?

Transparent hose allows the line and the fluid inside it to be visually inspected during service.

Depending on the system, this can make it easier to identify:

  • Whether fluid is present in the line
  • Air pockets
  • Visible contamination
  • Flow interruptions
  • Hose discoloration or deterioration

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft Transparent small oil-injection hose View 255
256 3/16" 10 ft Transparent PWC Tygon fuel hose View 256
257 1/4" 10 ft PWC / MerCruiser pump-to-carb Tygon fuel hose View 257
258 5/16" 10 ft PWC / Outboard transparent Tygon fuel hose View 258
259 1/8" 10 ft Transparent Tygon bleed hose Current Product

Other Tygon Hose Options

3/32 Tygon Hose 3/32" Tygon Hose - 255

Transparent small-diameter Tygon hose for oil-injection applications.

View 3/32" Tygon Hose
3/16 Tygon Hose 3/16" Tygon Fuel Hose - 256

Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.

View 3/16" Tygon Fuel Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carb applications.

View 1/4" Tygon Fuel Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.

View 5/16" Tygon Fuel Hose

Fuel Line Clamp Tools

Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Complete assortment of commonly used Oetiker clamp sizes with the installation tool included.

View Oetiker Clamp Pack

Choosing the Correct Bleed Hose Size

Bleed hose should be matched to the exact fitting and fluid-line application. Item 259 has a 1/8" inside diameter.

Do not substitute another hose size simply because it appears close. A proper fit at each connection is important for preventing leaks and maintaining reliable fluid flow.

When Should Bleed Hose Be Replaced?

Small-diameter hose should be inspected during normal system service. Replacement should be considered if the hose shows:

  • Cracking or splitting
  • Hardening or brittleness
  • Fluid leakage
  • Loose connections at fittings
  • Visible contamination or deterioration
  • Abrasion or routing damage

Key Features and Benefits

  • 1/8" inside diameter
  • 10-foot length
  • Transparent Tygon bleed hose
  • Suitable for compatible marine and PWC bleed-line applications
  • Transparent construction allows visual inspection of fluid in the line
  • Additional Tygon fuel-hose sizes available
  • Small oil-injection hose option available
  • Oetiker pincer tool available for compatible clamp applications
  • Complete Oetiker clamp assortment with tool available

Need Help Choosing the Right Hose?

Hose diameter, hose construction, application and clamp selection should all match the system being serviced.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 259?
Item 259 is 1/8" ID Tygon bleed hose.

How much hose is included?
Item 259 is supplied in a 10-foot length.

Is this hose transparent?
Yes. The transparent construction allows visual inspection of fluid inside the hose.

Is this a main fuel-supply hose?
No. Item 259 is listed as a bleed hose, not as the larger main fuel-feed hose used between a tank and engine.

Is this sold by the foot?
No. Item 259 is supplied as a 10-foot length.

Do you carry 3/32" Tygon hose?
Yes. Pro Marine stocks item 255 3/32" Tygon hose .

Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks 3/16", 1/4" and 5/16" Tygon fuel hose.

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible ear-clamp applications.

Do you sell a clamp assortment?
Yes. The Pro Marine Oetiker Clamp Pack with Tool includes commonly used clamp sizes and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers and Terms

259, Tygon 259, 1/8 Tygon hose, 1/8 bleed hose, Tygon bleed hose, marine bleed hose, PWC bleed hose, small fluid hose, transparent bleed line, transparent Tygon tubing, oil bleed hose, marine bleed line, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose

Item#:
259
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
16.00
10FT LENGTH
Transparent 5/16" Tygon Fuel Line for PWC and Outboard Use

Transparent Tygon Fuel Hose

5/16" Tygon Fuel Hose - 10ft Length

Pro Marine Item 258 is transparent 5/16" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC and outboard fuel-system applications requiring 5/16" inside-diameter hose.

The transparent construction allows technicians to visually inspect fuel inside the line during installation, troubleshooting and routine fuel-system service.

Pro Marine stocks several Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare all of the available options.

5/16" Tygon Fuel Hose - Item 258

Inside Diameter: 5/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC / Outboard Fuel Systems
Item Number: 258

Compatible Applications

Item 258 is intended for fuel-system applications requiring 5/16" transparent Tygon fuel hose.

  • PWC fuel systems requiring 5/16" ID hose
  • Outboard fuel-system applications requiring 5/16" ID hose
  • Other compatible small fuel circuits requiring this hose size and material

Always verify the required inside diameter and hose application before replacing an existing fuel line.

Why Use Transparent Tygon Fuel Hose?

Transparent hose makes it easier to visually inspect what is happening inside the fuel line.

Depending on the system, this can help identify:

  • Whether fuel is present in the line
  • Obvious air pockets
  • Fuel-flow interruptions
  • Visible contamination
  • Hose discoloration or deterioration

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft Transparent small oil-injection hose View 255
256 3/16" 10 ft Transparent PWC Tygon fuel hose View 256
257 1/4" 10 ft PWC / MerCruiser pump-to-carb Tygon fuel hose View 257
258 5/16" 10 ft PWC / Outboard transparent Tygon fuel hose Current Product
259 1/8" 10 ft Transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/32 Tygon Hose 3/32" Tygon Hose - 255

Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.

View 3/32" Tygon Hose
3/16 Tygon Hose 3/16" Tygon Fuel Hose - 256

Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.

View 3/16" Tygon Fuel Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carburetor applications.

View 1/4" Tygon Fuel Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Tygon hose should be matched to the fitting and fuel-system application. Item 258 has a 5/16" inside diameter.

Verify the original hose size before installation. Do not substitute 1/4", 3/16" or another hose diameter simply because the connection appears similar.

When Should Tygon Fuel Hose Be Replaced?

Inspect fuel hose during routine fuel-system service and replace it when deterioration is found.

Common reasons for replacement include:

  • Cracks or splits
  • Hardening or brittleness
  • Fuel leakage
  • Loose connections at fittings
  • Severe discoloration or deterioration
  • Abrasion or routing damage

Key Features and Benefits

  • 5/16" inside diameter
  • 10-foot length
  • Transparent Tygon fuel hose
  • Useful for compatible PWC fuel-system applications
  • Useful for compatible outboard fuel-system applications
  • Transparent construction allows visual inspection of the fuel line
  • Additional Tygon fuel-hose sizes available
  • Oil-injection and bleed-hose options available
  • Oetiker pincer tool available for compatible clamp applications
  • Complete Oetiker clamp assortment with tool available

Need Help Choosing the Right Fuel Hose?

Hose diameter, hose construction, application and clamp selection all need to match the system being serviced.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 258?
Item 258 is 5/16" ID Tygon fuel hose.

How much hose is included?
Item 258 is supplied in a 10-foot length.

Is this hose transparent?
Yes. The transparent construction allows visual inspection of fuel inside the line.

Does this hose fit PWC applications?
Yes. Item 258 is used in compatible PWC fuel systems requiring 5/16" Tygon hose.

Can this hose be used in outboard fuel systems?
Yes. It is also suitable for compatible outboard applications requiring 5/16" Tygon fuel hose.

Is this hose sold by the foot?
No. Item 258 is supplied as a 10-foot length.

Do you carry smaller Tygon fuel hose?
Yes. Pro Marine stocks 3/16" Tygon fuel hose and 1/4" Tygon fuel hose .

Do you carry oil-injection hose?
Yes. Pro Marine stocks item 255 3/32" Tygon hose for small oil-injection line applications.

Do you carry Tygon bleed hose?
Yes. Pro Marine stocks item 259 1/8" Tygon bleed hose .

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp applications.

Do you sell a complete clamp assortment?
Yes. The Pro Marine Oetiker Clamp Pack with Tool includes common clamp sizes and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers and Terms

258, Tygon 258, 5/16 Tygon hose, 5/16 Tygon fuel hose, 5/16 fuel line, PWC fuel hose, PWC fuel line, outboard fuel hose, outboard fuel line, transparent fuel hose, transparent fuel line, Tygon fuel hose, Tygon hose 10ft, marine fuel hose, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
258
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
38.00
Length
Transparent Fuel Line for PWC and MerCruiser Pump-to-Carb Use

Transparent Tygon Fuel Hose

1/4" Tygon Fuel Hose - 10ft Length

Pro Marine Item 257 is transparent 1/4" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC fuel systems and in MerCruiser fuel-pump-to-carburetor applications requiring 1/4" inside-diameter hose.

The transparent construction allows visual inspection of fuel inside the hose, making it useful when diagnosing or servicing small fuel-system circuits.

Pro Marine stocks multiple Tygon hose sizes for fuel, oil-injection and bleed-line applications. Compare all available sizes in the chart below.

1/4" Tygon Fuel Hose - Item 257

Inside Diameter: 1/4"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC Fuel Systems / MerCruiser Pump-to-Carb Fuel Line
Item Number: 257

Compatible Applications

Item 257 is intended for fuel-system applications requiring 1/4" transparent Tygon fuel hose.

  • PWC fuel-line applications requiring 1/4" ID hose
  • MerCruiser fuel-pump-to-carburetor hose applications requiring 1/4" ID line
  • Other compatible small fuel-system circuits requiring this hose size and material

Always verify the required hose size and application before replacing an existing fuel line.

MerCruiser Pump-to-Carb Fuel Hose

Item 257 is also useful for compatible MerCruiser pump-to-carburetor fuel-line applications requiring 1/4" hose.

This section of the fuel system carries fuel from the fuel pump toward the carburetor. Verify the original hose diameter and fuel-system configuration before installation.

Why Use Transparent Tygon Fuel Hose?

Transparent fuel hose makes it possible to visually inspect the fuel inside the line during service.

Depending on the application, this can help identify:

  • Whether fuel is present in the line
  • Obvious air pockets
  • Fuel-flow interruptions
  • Visible contamination
  • Line deterioration or discoloration

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft Transparent small oil-injection hose View 255
256 3/16" 10 ft Transparent PWC Tygon fuel hose View 256
257 1/4" 10 ft PWC / MerCruiser pump-to-carb Tygon fuel hose Current Product
258 5/16" 10 ft Transparent PWC and outboard Tygon fuel hose View 258
259 1/8" 10 ft Transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/32 Tygon Hose 3/32" Tygon Hose - 255

Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.

View 3/32" Tygon Hose
3/16 Tygon Hose 3/16" Tygon Fuel Hose - 256

Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.

View 3/16" Tygon Fuel Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.

View 5/16" Tygon Fuel Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

Pro Marine also stocks Oetiker clamp installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Tygon hose should be matched to the fitting and fuel-system application. Item 257 has a 1/4" inside diameter.

Do not substitute a 3/16" or 5/16" hose simply because the fitting appears close in size. The hose must fit the fuel-system connection properly and match the original application.

When Should Tygon Fuel Hose Be Replaced?

Inspect small fuel lines during normal fuel-system maintenance. Replace hose that shows signs such as:

  • Cracks or splitting
  • Hardening or brittleness
  • Fuel leakage
  • Loose hose-to-fitting connections
  • Severe discoloration or deterioration
  • Abrasion or routing damage

Key Features and Benefits

  • 1/4" inside diameter
  • 10-foot length
  • Transparent Tygon fuel hose
  • Fits compatible PWC fuel-system applications
  • Fits compatible MerCruiser pump-to-carburetor applications
  • Transparent construction allows visual inspection of fuel flow
  • Additional Tygon fuel-hose sizes available
  • Oil-injection and bleed-hose options also available
  • Oetiker pincer tool available for compatible clamp applications
  • Complete Oetiker clamp assortment with tool available

Need Help Choosing the Right Fuel Hose?

Hose diameter, hose construction, application and clamp selection all matter when servicing marine fuel systems.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 257?
Item 257 is 1/4" ID Tygon fuel hose.

How much hose is included?
The hose is supplied in a 10-foot length.

Is this hose transparent?
Yes. Its transparent construction allows visual inspection of fuel inside the hose.

Does this hose fit PWC applications?
Yes. Item 257 is used in compatible PWC fuel systems requiring 1/4" Tygon hose.

Can this be used on MerCruiser engines?
Yes. Item 257 is listed for compatible MerCruiser fuel-pump-to-carburetor applications requiring 1/4" hose.

Is this sold by the foot?
No. Item 257 is supplied as a 10-foot length.

Do you carry a smaller Tygon fuel hose?
Yes. Pro Marine stocks 3/16" Tygon fuel hose .

Do you carry a larger Tygon fuel hose?
Yes. Pro Marine stocks 5/16" Tygon fuel hose .

Do you sell oil-injection and bleed hose?
Yes. Pro Marine also stocks 3/32" Tygon oil-injection hose and 1/8" Tygon bleed hose .

Do you sell Oetiker clamp tools?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp installations.

Do you sell a complete clamp assortment?
Yes. The Pro Marine Oetiker Clamp Pack with Tool includes common clamp sizes and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers and Terms

257, Tygon 257, 1/4 Tygon hose, 1/4 Tygon fuel hose, 1/4 fuel line, PWC fuel hose, PWC fuel line, MerCruiser fuel hose, MerCruiser pump to carb hose, pump to carb fuel line, carburetor fuel hose, transparent fuel hose, transparent fuel line, Tygon fuel hose 10ft, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
257
Cross Reference#:
738152
7381563
7381567
Manufacturer Item:
7381567
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
29.00
10FT LENGTH
Transparent 3/16" Tygon Fuel Line for PWC Applications

Transparent Tygon Fuel Hose

3/16" Tygon Fuel Hose - 10ft Length

Pro Marine Item 256 is transparent 3/16" Tygon fuel hose supplied in a convenient 10-foot length. This small-diameter fuel line is commonly used for PWC fuel-system applications where 3/16" inside-diameter hose is required.

The transparent construction makes it easier to visually inspect the fuel line during installation and service and can help identify fuel, air pockets or contamination inside the hose.

Pro Marine stocks several Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications. Use the Tygon hose size chart below to quickly compare the available options.

3/16" Tygon Fuel Hose - Item 256

Inside Diameter: 3/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: PWC Fuel Line
Item Number: 256

What This Tygon Fuel Hose is Used For

Item 256 is used for small-diameter fuel-line applications requiring 3/16" Tygon fuel hose. It is particularly useful when servicing PWC fuel systems that use this hose diameter.

Fuel hose can deteriorate with age and exposure to fuel, heat and the operating environment. Hose that has become hard, brittle, cracked, damaged or otherwise deteriorated should be inspected and replaced as needed.

Always verify the required inside diameter and application before replacing an existing fuel hose.

Benefits of Transparent Tygon Fuel Hose

One of the useful characteristics of transparent Tygon hose is the ability to visually inspect the fuel inside the line.

Depending on the system, this can help during fuel-system diagnosis and service by making it easier to identify whether fuel is present in the line and spot obvious air pockets or contamination.

Need a Different Tygon Hose Size?

Pro Marine stocks Tygon hose in several inside diameters. Match the hose size to the fitting and original fuel, oil-injection or bleed-line application.

Use the chart below to compare all of the Tygon hose options in this section.

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft Transparent Tygon small oil-injection hose View 255
256 3/16" 10 ft Transparent Tygon fuel hose for PWC applications Current Product
257 1/4" 10 ft Transparent Tygon fuel hose View 257
258 5/16" 10 ft Transparent Tygon fuel hose View 258
259 1/8" 10 ft Transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/32 Tygon Hose 3/32" Tygon Hose - 255

Transparent small-diameter Tygon hose for PWC oil-injection line applications. Supplied in a 10-foot length.

View 3/32" Tygon Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose supplied in a 10-foot length.

View 1/4" Tygon Fuel Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose supplied in a 10-foot length.

View 5/16" Tygon Fuel Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

Pro Marine also stocks Oetiker installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps. Always match the clamp to the specific hose and fitting being serviced.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Complete Pro Marine Oetiker clamp assortment with the installation tool included. A convenient option for shops and technicians working with multiple marine hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Tygon hose should be matched to the inside diameter required by the fitting and fuel system. Item 256 has a 3/16" inside diameter.

When replacing existing hose, verify the original hose diameter and the application before installation. Do not substitute another diameter simply because it appears close in size.

When Should Tygon Fuel Hose Be Replaced?

Inspect small fuel lines as part of normal fuel-system service. Replacement should be considered if the hose shows:

  • Cracks or splits
  • Hardening or brittleness
  • Visible deterioration
  • Fuel leakage
  • Loose connections at fittings
  • Damage from abrasion or improper routing

Key Features and Benefits

  • 3/16" inside diameter
  • 10-foot length
  • Transparent Tygon fuel hose
  • Useful for PWC fuel-line applications requiring 3/16" hose
  • Transparent construction allows visual inspection of the fuel line
  • Multiple additional Tygon hose sizes available
  • Oil-injection and bleed-hose options available
  • Oetiker pincer tool available for compatible clamp applications
  • Complete Oetiker clamp pack with tool available

Need Help Choosing the Right Fuel Hose?

Fuel-line diameter, hose type, fittings and clamp selection all need to match the application. Use the Pro Marine Fuel Line Technical Center to compare the different fuel-hose options and related installation parts.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 256?
Item 256 is 3/16" ID Tygon fuel hose.

How much hose is included?
Item 256 is supplied in a 10-foot length.

Is this hose transparent?
Yes. The transparent construction allows visual inspection of the fuel line during service.

Is this hose sold by the foot?
No. Item 256 is supplied as a 10-foot length.

Do you have a smaller Tygon hose?
Yes. Pro Marine stocks item 255 3/32" Tygon hose for small oil-injection line applications.

Do you carry larger Tygon fuel hose?
Yes. Pro Marine also stocks 1/4" Tygon fuel hose and 5/16" Tygon fuel hose .

Do you carry Tygon bleed hose?
Yes. Pro Marine stocks item 259 1/8" Tygon bleed hose .

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp applications.

Do you sell a clamp assortment?
Yes. The Pro Marine CLAMP-PACK includes an assortment of Oetiker clamps and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers and Terms

256, Tygon 256, 3/16 Tygon hose, 3/16 fuel hose, 3/16 fuel line, PWC fuel hose, PWC fuel line, Tygon fuel hose, transparent fuel hose, transparent fuel line, Tygon tubing, Tygon hose 10ft, small fuel hose, PWC fuel system, 255, 3/32 Tygon hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
256
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
26.00
10 FT LENGTH
Transparent Small Oil Injection Line for PWC Applications

Transparent Tygon Hose

3/32" Tygon Small Oil Injection Hose - 10ft Length

Pro Marine Item 255 is transparent 3/32" Tygon hose supplied in a 10-foot length. This small-diameter flexible tubing is commonly used for PWC oil-injection line applications where 3/32" inside-diameter hose is required.

The transparent construction makes it easier to visually inspect the line and see fluid within the hose, which is particularly useful when servicing small oil-injection systems.

Need another size? Pro Marine stocks a range of Tygon hose from 3/32" through 5/16", including fuel-hose and bleed-hose options. See the complete size chart below.

3/32" Tygon Hose - Item 255

Inside Diameter: 3/32"
Length: 10 Feet
Material: Tygon
Color: Transparent
Primary Application: PWC Small Oil Injection Line
Item Number: 255

What This Tygon Hose is Used For

Item 255 is intended for small-diameter fluid-line applications requiring 3/32" Tygon tubing. Pro Marine lists this hose primarily for PWC small oil-injection line applications.

Small oil-injection hoses can become hard, brittle, cracked or damaged with age. Replacing deteriorated tubing is an important part of servicing an oil-injected PWC or other compatible system.

Always verify the required inside diameter and application before replacing an existing hose.

Why Use Transparent Tygon Hose?

Transparent tubing provides an important advantage on small fluid lines: it allows the technician to visually inspect what is happening inside the hose.

Depending on the system, this can make it easier to check for fluid in the line and identify obvious air pockets or contamination during service.

Need a Different Tygon Hose Size?

Pro Marine stocks multiple transparent Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications.

Use the size chart below to compare the available options and go directly to the correct product page.

Tygon Hose Size Guide

Item Inside Diameter Length Description / Application Product
255 3/32" 10 ft PWC small oil-injection line - transparent View 255
256 3/16" 10 ft PWC transparent Tygon fuel hose View 256
257 1/4" 10 ft PWC transparent fuel hose / MerCruiser pump-to-carb applications View 257
258 5/16" 10 ft PWC and outboard transparent Tygon fuel hose View 258
259 1/8" 10 ft Universal transparent Tygon bleed hose View 259

Other Tygon Hose Options

3/16 Tygon Hose 3/16" Tygon Fuel Hose - 256

Transparent 3/16" Tygon fuel hose for PWC applications. Supplied in a 10-foot length.

View 3/16" Tygon Hose
1/4 Tygon Hose 1/4" Tygon Fuel Hose - 257

Transparent 1/4" Tygon fuel hose for PWC and listed MerCruiser pump-to-carb applications.

View 1/4" Tygon Hose
5/16 Tygon Hose 5/16" Tygon Fuel Hose - 258

Transparent 5/16" Tygon fuel hose for PWC and outboard applications. Supplied in a 10-foot length.

View 5/16" Tygon Hose
1/8 Tygon Hose 1/8" Tygon Bleed Hose - 259

Universal transparent 1/8" Tygon bleed hose supplied in a 10-foot length.

View 1/8" Tygon Bleed Hose

Fuel Line Clamp Tools

When servicing marine fuel, oil-injection and bleed-line systems, Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for applications that use Oetiker ear clamps.

Oetiker Pincer Oetiker Standard Jaw Pincer - 14118CJ

Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool - CLAMP-PACK

Pro Marine clamp assortment containing 130 pieces plus the installation tool. A convenient option for marine shops and technicians servicing multiple hose sizes.

View Oetiker Clamp Pack

Choosing the Correct Tygon Hose Size

Hose size should be matched to the fitting and system being serviced. Do not substitute a larger or smaller hose simply because it appears close in size.

For an existing oil-injection, fuel or bleed-line system, compare the original hose size and application before replacement. If the application is uncertain, verify the engine or PWC model and the required hose size before installation.

Key Features and Benefits

  • 3/32" inside diameter Tygon tubing
  • 10-foot length
  • Transparent construction
  • Designed for small oil-injection line applications
  • Commonly used in PWC service applications
  • Allows visual inspection of fluid inside the hose
  • Additional Tygon sizes available from 3/16" through 5/16"
  • 1/8" Tygon bleed hose also available
  • Oetiker pincer tool available for compatible ear-clamp applications
  • Complete Pro Marine Oetiker clamp pack and tool available

Need Help Choosing the Right Hose?

Hose diameter and application both matter when replacing marine fuel, oil-injection and bleed lines. Pro Marine's Fuel Line Technical Center brings together our hose sizes, fuel-line classifications, clamps and related installation information.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is Pro Marine item 255?
Item 255 is 3/32" ID Tygon hose supplied in a 10-foot length.

What is 3/32" Tygon hose used for?
Pro Marine lists item 255 primarily for PWC small oil-injection line applications.

Is the hose transparent?
Yes. Item 255 is transparent, allowing the line and fluid inside it to be visually inspected.

Is this hose sold by the foot?
No. Item 255 is supplied as a 10-foot length.

Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks 3/16", 1/4" and 5/16" transparent Tygon fuel hose.

Do you carry Tygon bleed hose?
Yes. Pro Marine stocks item 259 1/8" Tygon bleed hose in a 10-foot length.

Do you sell an Oetiker clamp installation tool?
Yes. The Oetiker 14118CJ Standard Jaw Pincer is available for compatible Oetiker ear-clamp applications.

Do you sell a complete Oetiker clamp assortment?
Yes. The Pro Marine CLAMP-PACK contains 130 pieces plus the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers & Terms

255, Tygon 255, 3/32 Tygon hose, 3/32 oil injection hose, 3/32 oil line, PWC oil injection hose, PWC oil line, small oil injection line, transparent Tygon tubing, transparent oil hose, Tygon hose 10ft, Tygon tubing, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose

Item#:
255
Manufacturer:
Tygon Fuel LIne
Available:
In Stock
Your Price:
17.00
10FT LENGTH
|◀ ◀ 2197 - 2208 of 2777 ▶ ▶|
View: