Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2269 - 2280 of 2777 ▶ ▶|
View:
Heat Shrink 22-18AWG
Item#:
RRT10
Cross Reference#:
502530
67-851686
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
14.39
25 PACK
Item#:
316B
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
3.04
Foot
Item#:
YRT56
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
18.32
25 PACK
Item#:
YRT10
Cross Reference#:
502527
67-851691
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
17.84
25 PACK
Item#:
YRT14
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.68
25 PACK
Item#:
YRT38
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.68
25 PACK
Item#:
12B-4
Manufacturer Item:
BEHS-1/2BK
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
14.69
Each
Item#:
12R-4
Manufacturer Item:
BEHS-1/2RD
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
14.69
Each
All Uflex Steering Systems
Item#:
X82
Manufacturer Item:
X82
Manufacturer:
Uflex
Available:
In Stock
Your Price:
218.43
Each
Item#:
SR107
Manufacturer:
Arco
Available:
In Stock
Your Price:
34.65
Each
Hydraulic Steering Cylinder Bleed Kit for Pro Marine SeaStar & Uflex System

Hydraulic Steering Cylinder Bleed Kit

Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit

The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.

This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.

What a Hydraulic Steering Bleed Kit Does

A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.

Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.

Pro Tip: Air trapped inside a hydraulic steering system can cause soft steering feel, steering hesitation, noise, or inconsistent steering response. Proper bleeding is one of the most important steps during hydraulic steering installation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Hydraulic Steering Installation Bleeding air from newly installed steering systems
Hydraulic Steering Service Routine steering maintenance and repairs
Steering Cylinder Replacement Bleeding the system after cylinder installation
Repower Projects Completing hydraulic steering upgrades
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Hydraulic Fluid

Use quality hydraulic steering fluid during steering filling and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Fill Hose Assembly

Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.

View 102P Fill Hose Assembly

Hydraulic Steering Components

Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.

Shop Hydraulic Steering Components

Key Features and Benefits

  • Designed for hydraulic steering system bleeding
  • Helps remove trapped air from steering cylinders and hoses
  • Improves steering response and steering feel
  • Useful during installation and maintenance procedures
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Useful for marine technicians and DIY boat owners
  • Helps simplify hydraulic steering service work

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering bleed kit
  • Function: Steering system bleeding and air removal
  • Connection Type: Steering cylinder bleed fittings
  • Typical Use: Hydraulic steering installation and maintenance
  • Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
  • Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid

FAQ

What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.

Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.

What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.

Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.

Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings

Item#:
350-BLEEDKIT
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
66.22
Each
Item#:
350-HSTEER-ROD
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
318.27
Each
This item is discontinued
|◀ ◀ 2269 - 2280 of 2777 ▶ ▶|
View: