Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 13 - 24 of 2777 ▶ ▶|
View:
Yamaha 200-250HP 1990-2004
Item#:
8758
Cross Reference#:
61A-85780-00-00
61A-85780-01-00
Manufacturer Item:
61A-85780-01-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
123.59
Each
Item#:
80-04M04P
Cross Reference#:
18-3301
90280-04M02-00
90280-04M04-00
Manufacturer Item:
90280-04M04-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.01
Each
Yamaha C40 1990-1997
Item#:
80-04M00P
Cross Reference#:
18-3300
90280-04M00-00
Manufacturer Item:
90280-04M00-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.01
Each
Fits Yamaha F75 F90 VF90 FourStroke Outboards 2006-Present
Genuine Yamaha OEM Part

Genuine Yamaha 60° Thermostat for F75 F90 VF90

Genuine Yamaha thermostat 6FP-12411-00-00 is a factory OEM 60°C thermostat for select Yamaha F75, F90 and VF90 FourStroke outboards. It helps regulate coolant flow so the engine can warm up properly and maintain its designed operating temperature.

Genuine Yamaha Factory Replacement

This is the genuine Yamaha OEM version, not an aftermarket thermostat. Use it when your engine parts diagram calls for Yamaha part number 6FP-12411-00-00.

Compatible Applications

This OEM thermostat fits the following Yamaha four-stroke outboard families when the engine diagram specifies part number 6FP-12411-00-00.

Engine Family Applicable Variants Catalog Range
Yamaha F75LB Series F75LB and applicable _0120 through _0123 variants 2006-Present
Yamaha F75XB Series F75XB and applicable _0120 through _0123 variants 2006-Present
Yamaha F90JB Series F90JB and applicable _0120 through _0123 variants 2006-Present
Yamaha F90LB Series F90LB, F90LB2, F90LB3 and applicable catalog variants 2006-Present
Yamaha F90XB Series F90XB, F90XB2 and applicable catalog variants 2006-Present
Yamaha VF90LA and VF90LB VF90LA, VF90LB and applicable _0120 through _0324 variants 2006-Present
Yamaha VF90XA and VF90XB VF90XA, VF90XB and applicable _0120 through _0324 variants 2006-Present

Fitment includes applicable catalog suffixes such as _0120, _0121, _0122, _0123 and _0324. Always confirm the complete engine model and OEM number before ordering.

OEM and Cross Reference Numbers

Brand Part Number Reference Type
Yamaha 6FP-12411-00-00 Genuine OEM part number
Mercury 8M0175325 OEM cross reference
Mercury 8M6010300 OEM cross reference

What This Thermostat is Used For

The thermostat controls coolant flow through the engine. When the engine is cold, it remains closed to help the powerhead reach operating temperature. As the engine warms, the thermostat opens to allow cooling water to circulate.

A properly functioning thermostat supports consistent engine temperature, clean combustion, dependable idle quality and correct cooling-system operation.

Reasons to Inspect or Replace the Thermostat

Engine Overheating

A thermostat stuck closed can restrict coolant flow and contribute to overheating.

Engine Runs Too Cool

A thermostat stuck open can prevent the engine from reaching its intended temperature.

Cooling-System Service

Thermostats are commonly inspected during water-pump and cooling-system maintenance.

Corrosion or Deposits

Salt, scale and debris can interfere with thermostat movement and sealing.

Aftermarket Option Available

Pro Marine thermostat

Pro Marine 60° Thermostat 6FP-12411P

Looking for a cost-effective alternative? The Pro Marine version fits the same verified Yamaha applications and replaces OEM number 6FP-12411-00-00.

View Pro Marine Thermostat

Key Features and Benefits

Genuine Yamaha OEM

Factory Yamaha replacement for applications calling for 6FP-12411-00-00.

60°C Thermostat

Designed to regulate operating temperature in the listed Yamaha engines.

Application-Specific Fit

Fits select Yamaha F75, F90 and VF90 FourStroke outboards.

Cooling-System Maintenance

Suitable for scheduled service or replacement of a sticking or corroded thermostat.

Frequently Asked Questions

Is this a genuine Yamaha part?

Yes. This page is for the genuine Yamaha OEM thermostat, part number 6FP-12411-00-00.

What temperature is this thermostat?

This is a 60°C thermostat for the listed Yamaha F75, F90 and VF90 applications.

What Mercury numbers cross to this thermostat?

Mercury references associated with this thermostat include 8M0175325 and 8M6010300.

How should I confirm fitment?

Confirm your complete Yamaha engine model and verify that the OEM parts diagram specifies 6FP-12411-00-00 before ordering.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Part Numbers

6FP-12411-00-00, 6FP124110000, 8M0175325, 8M6010300, Yamaha F75 thermostat, Yamaha F90 thermostat, Yamaha VF90 thermostat, genuine Yamaha thermostat, Yamaha 60 degree thermostat, F75LB thermostat, F75XB thermostat, F90LB thermostat, F90XB thermostat, VF90 SHO thermostat

Item#:
6FP-12411-00-00
Cross Reference#:
18-3641
6FP-12411-00-00
8M0175325
8M6010300
Manufacturer Item:
6FP-12411-00-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
76.95
Each
Item#:
6Y5-83570-A0-00
Cross Reference#:
6Y5-83500-S0-00
6Y5-83500-S0-00
6Y5-83500-S1-00
6Y5-83500-S2-00
6Y5-83500-S4-00
6Y5-83500-S5-00
6Y5-83570-A0-00
6Y5-83570-A1-00
6Y5-83570-A2-00
6Y5-83570-A3-00
6Y5-83570-S0-00
6Y5-83570-S1-00
6Y5-83570-S2-00
6Y5-83570-S3-00
6Y5-83570-S4-00
6Y5-83570-S5-00
6Y5-83570-S6-00
Manufacturer Item:
6Y5-83570-A0-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
427.50
Each
Yamaha F350 4.3L V6
Item#:
6CE-12411-10-00
Cross Reference#:
6CE-12411-10-00
Manufacturer Item:
6CE-12411-10-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
49.95
Each
Yamaha F425-450 V8
Item#:
6GR-12411-00-00
Cross Reference#:
6GR-12411-00-00
Manufacturer Item:
6GR-12411-00-00
Manufacturer:
Yamaha Outboard
Available:
Out of Stock
ETA:
11/19/2026
Your Price:
112.95
Each
Mercury 45-75 4 Cylinder 50-70hp 3 Cylinder 398-5704A7
Item#:
5454P
Cross Reference#:
174-5454
5454A21
5454A22
5454A25
5454A26
5454A63
5704A2
5704A5
5704A7
5919A2
5919A3
5919A6
5919A7
5919A8
818535A15
832075A14
832075A20
Manufacturer Item:
5704A7
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
11/14/2026
Your Price:
218.61
Each
Yamaha F200-F350 2010 & Up
Yamaha 
F200 2019-2021
F225 2010-2023
F250 2010-2023
F300 2010-2023
F350 2023
Item#:
6CE-44352PO
Cross Reference#:
18-45617
18-45617
6CE-44352-00-00
8M0175392
8M6010334
89300
Manufacturer Item:
6CE-44352-00-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
25.50
Each
Yamaha Command Link / Plus Command Link Only
Item#:
6Y8-83500-20-00
Cross Reference#:
6Y8-83500-10-00
6Y8-83500-11-BK
6Y8-83500-11-00
6Y8-83500-20-00
6Y8-83500-21-00
6Y8-83500-22-00
6Y8-83500-23-00
6Y8-83500-24-00
Manufacturer Item:
6Y8-83500-23-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
530.50
Each
Fits F115 LF115 F130 LF130 and VF115 FourStroke Models 2006-Present
Genuine Yamaha OEM Part

Genuine Yamaha 60° Thermostat for F115 F130 VF115

Genuine Yamaha thermostat 6EK-12411-00-00 is a factory OEM 60°C thermostat for select Yamaha F115, LF115, F130, LF130 and VF115 FourStroke outboards. It regulates cooling-water flow to help the engine warm up correctly and maintain its intended operating temperature.

Genuine Yamaha Factory Replacement

This is the genuine Yamaha OEM thermostat, not an aftermarket replacement. Use it when the applicable Yamaha engine parts diagram specifies thermostat 6EK-12411-00-00.

Compatible Applications

This thermostat fits the following Yamaha outboard families when the engine parts diagram specifies OEM number 6EK-12411-00-00.

Engine Family Applicable Models Catalog Range
Yamaha F115JB F115JB and applicable _0120 through _0123 variants 2006-Present
Yamaha F115LB Series F115LB, F115LB2, F115LB3 and applicable catalog variants 2006-Present
Yamaha F115XB Series F115XB, F115XB2 and applicable catalog variants 2006-Present
Yamaha LF115XB Series LF115XB, LF115XB2 and applicable catalog variants 2006-Present
Yamaha F130 and LF130 F130LA, F130XA and LF130XA 2006-Present
Yamaha VF115LA and VF115LB VF115LA, VF115LB and applicable -20, _0120, _0121, _0222, _0223 and _0324 variants 2006-Present
Yamaha VF115XA and VF115XB VF115XA, VF115XB and applicable -20, _0120, _0121, _0222, _0223 and _0324 variants 2006-Present

Important Fitment Note

Yamaha model suffixes identify specific production versions and engine configurations. Confirm your complete engine model and verify that the applicable OEM parts diagram calls for thermostat 6EK-12411-00-00. Do not order using horsepower alone.

OEM & Cross Reference Numbers

Brand Part Number Reference Type
Yamaha OEM 6EK-12411-00-00 Genuine OEM part number
Mercury 8M0175396 Superseded OEM reference
Mercury 8M6010301 OEM cross reference
Mercury 8M6013870 OEM cross reference

What This Part is Used For

The thermostat regulates the flow of cooling water through the engine. It stays closed while the engine is cold to help the powerhead warm up efficiently, then opens as the engine reaches its intended operating temperature.

Proper thermostat operation supports consistent engine temperature, reliable idle quality, efficient combustion and dependable cooling-system performance.

Reasons to Inspect or Replace the Thermostat

Engine Overheating

A thermostat that remains closed may restrict cooling-water circulation and contribute to overheating.

Engine Runs Too Cool

A thermostat stuck open may prevent the engine from reaching its intended operating temperature.

Cooling-System Service

Thermostats are commonly inspected during water-pump and other cooling-system maintenance.

Salt or Mineral Deposits

Corrosion, salt and debris can interfere with thermostat movement and cooling-system performance.

Pro Marine Aftermarket Option Available

Pro Marine thermostat
Pro Marine Aftermarket

Pro Marine 60° Thermostat 6EK-12411P

Looking for a cost-effective alternative? The Pro Marine thermostat fits the same verified applications and replaces Yamaha OEM number 6EK-12411-00-00.

View Pro Marine Thermostat

Key Features and Benefits

Genuine Yamaha OEM

Factory Yamaha replacement for applications specifying part number 6EK-12411-00-00.

60°C Temperature Rating

Calibrated to help the listed engines maintain their intended operating temperature.

Application-Specific Fit

Fits select Yamaha F115, LF115, F130, LF130 and VF115 FourStroke outboards.

Factory Replacement Option

Ideal for owners and technicians who prefer genuine Yamaha cooling-system components.

Frequently Asked Questions

Is this a genuine Yamaha thermostat?

Yes. This is the genuine Yamaha OEM thermostat, part number 6EK-12411-00-00.

What temperature is this thermostat?

This is a 60°C thermostat for the listed Yamaha FourStroke applications.

What Yamaha engines does it fit?

It fits select Yamaha F115, LF115, F130, LF130 and VF115 models whose parts diagrams specify thermostat 6EK-12411-00-00.

Is an aftermarket version available?

Yes. Pro Marine thermostat 6EK-12411P is available as a cost-effective aftermarket alternative.

How should I confirm fitment?

Confirm the complete engine model and verify that the applicable Yamaha OEM parts diagram specifies thermostat 6EK-12411-00-00 before ordering.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Part Numbers

6EK-12411-00-00, 6EK124110000, 8M0175396, 8M6010301, 8M6013870, Yamaha OEM thermostat, genuine Yamaha thermostat, Yamaha F115 thermostat, Yamaha LF115 thermostat, Yamaha F130 thermostat, Yamaha LF130 thermostat, Yamaha VF115 thermostat, Yamaha V MAX SHO thermostat, 60 degree Yamaha thermostat

Item#:
6EK-12411-00-00
Cross Reference#:
6EK-12411-00-00
8M0175396
8M6010301
8M6013870
Manufacturer Item:
6EK-12411-00-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
49.95
Each
Pro Marine 20 FT Main Wiring Harness for Yamaha 10-Pin Systems
Pro Marine Brand Aftermarket Replacement

6X38258P Yamaha 10-Pin Main Wiring Harness - 20 FT

The Pro Marine 6X38258P is a 20-foot Yamaha-style 10-pin main wiring harness for compatible Yamaha outboard conventional-control rigging systems.

This aftermarket harness provides the main electrical connection between compatible Yamaha outboards and the boat's conventional helm/control wiring. It is an aftermarket alternative to Yamaha 688-8258A-60-00 and the earlier 6X3-8258A-10-00 20-foot harness.

Product Information

  • Pro Marine Part Number: 6X38258P
  • Brand: Pro Marine
  • Part Type: Main Engine Wiring Harness
  • Harness Type: Yamaha 10-Pin
  • Length: 20 FT
  • Primary OEM Replacement: 688-8258A-60-00
  • Earlier Yamaha Number: 6X3-8258A-10-00
  • Application: Compatible Yamaha outboards using the conventional 10-pin main harness system

Important Fitment Note

This is specifically a 20 FT, 10-pin Yamaha main harness. Do not order based only on the Yamaha brand or engine horsepower.

Yamaha has used different main-harness connector styles, harness lengths, control systems, and rigging configurations. Confirm that your application uses the conventional Yamaha 10-pin main harness before ordering.

Also verify harness length. Several Yamaha part numbers in this harness family use the same general 10-pin configuration but are supplied in different lengths.

OEM and Cross Reference Numbers

The Pro Marine 6X38258P is the 20 FT aftermarket version of the Yamaha conventional 10-pin main harness.

Part Number Brand / Relationship Length
6X38258P Pro Marine Aftermarket 20 FT
688-8258A-60-00 Yamaha OEM - Direct 20 FT Version 20 FT
6X3-8258A-10-00 Earlier Yamaha Number / Superseded by 688-8258A-60-00 20 FT Class
6X3-8258A-00-00 Related Yamaha 10-Pin Harness Approx. 16.4 FT / 5 m
688-8258A-50-00 Related Yamaha 10-Pin Harness 16.4 FT
688-8258A-70-00 Related Yamaha 10-Pin Harness 23 FT
Length Matters: The 16.4 FT, 20 FT, and 23 FT Yamaha harnesses are related 10-pin conventional-control harnesses, but they are not the same physical length. This Pro Marine part is the 20 FT version.
GENUINE YAMAHA OEM VERSION AVAILABLE

Yamaha 688-8258A-60-00 20 FT Main Harness

Prefer genuine Yamaha OEM? Pro Marine USA also offers 688-8258A-60-00, the Yamaha OEM 20-foot conventional 10-pin main harness and the OEM counterpart to this Pro Marine aftermarket version.

View Yamaha OEM Harness

What This Harness is Used For

The main wiring harness provides the electrical connection between a compatible Yamaha outboard and the boat's conventional helm/control electrical system.

On compatible Yamaha 10-pin systems, the harness carries the circuits required between the engine-side connection and the conventional control system at the helm.

This type of harness is commonly replaced during a repower, control-box replacement, complete boat re-rig, wiring restoration, or when the original harness has been damaged or corroded.

Compatible Applications

Application Requirement
Yamaha Outboard Must use compatible conventional Yamaha 10-pin main harness system
Harness Length 20 FT
OEM Harness Match 688-8258A-60-00 or earlier 6X3-8258A-10-00 20 FT application

This listing should not be interpreted as fitting every Yamaha outboard. Yamaha fitment depends on the engine, control system, connector configuration, rigging generation, and harness length.

10-Pin Conventional Control Harness

This part is for Yamaha applications using the 10-pin conventional main harness.

It should not be confused with Yamaha digital electronic control, Command Link Plus DEC, or other harness systems that use different connectors and wiring arrangements. Compare your existing connectors and OEM number before ordering.

Common Replacement Reasons

  • Original main harness has damaged, cut, or brittle wiring.
  • Connector pins are corroded, bent, damaged, or missing.
  • Electrical problems are traced to damage within the existing harness.
  • Boat is being re-rigged with a compatible Yamaha conventional 10-pin control system.
  • Existing harness is being replaced during an engine repower.
  • Restoration of an older Yamaha rigging installation.
  • A 20-foot harness length is required for the boat's engine-to-helm routing.

Installation Tips

  • Disconnect battery power before servicing or replacing the engine wiring harness.
  • Confirm both ends use the correct Yamaha 10-pin connector configuration before routing the harness.
  • Compare the replacement harness with the original harness before installation.
  • Route the harness away from sharp edges, moving steering components, excessive heat, and areas where water can collect.
  • Do not stretch the harness tightly between the engine and helm.
  • Allow enough movement at the engine end for normal steering and engine movement.
  • Inspect mating connectors and terminals for corrosion or damage before connecting the new harness.
  • Secure the harness properly to prevent chafing and vibration damage.

Key Features and Benefits

  • Pro Marine Brand: Cost-effective aftermarket alternative to the Yamaha OEM harness.
  • 20 FT Length: Designed for applications requiring the Yamaha 20-foot main harness.
  • 10-Pin Configuration: For compatible Yamaha conventional-control rigging systems.
  • OEM Replacement: Replaces Yamaha 688-8258A-60-00 applications.
  • Earlier Number Coverage: Cross-references the earlier 6X3-8258A-10-00 20-foot harness.
  • Rigging Replacement: Useful for re-rigging, repowers, restorations, and damaged-harness replacement.
  • OEM Option Available: Genuine Yamaha 688-8258A-60-00 is also available from Pro Marine USA.

Frequently Asked Questions

What is Pro Marine 6X38258P?

6X38258P is a Pro Marine aftermarket 20-foot main wiring harness for compatible Yamaha outboards using the conventional 10-pin harness system.

How long is the 6X38258P harness?

It is a 20-foot harness.

How many pins does this Yamaha harness use?

This is a 10-pin main harness.

Does 6X38258P replace Yamaha 688-8258A-60-00?

Yes. 688-8258A-60-00 is Yamaha's 20-foot conventional 10-pin main harness and is the primary OEM counterpart for Pro Marine 6X38258P.

What happened to Yamaha 6X3-8258A-10-00?

Yamaha 6X3-8258A-10-00 is an earlier number associated with the 20-foot harness application and was superseded by 688-8258A-60-00.

Is 688-8258A-50-00 the same as this harness?

It is part of the related Yamaha 10-pin main-harness family, but it is approximately 16.4 feet long. The Pro Marine 6X38258P on this page is the 20-foot version.

Is 688-8258A-70-00 the same length?

No. Yamaha 688-8258A-70-00 is approximately 23 feet long. Verify the length required for your boat before choosing between harness versions.

Does this fit every Yamaha outboard with conventional controls?

No. Yamaha has used several harness and control configurations. Your engine and controls must use the compatible 10-pin main harness configuration.

Is this for Yamaha Command Link Plus digital controls?

No. This listing is for the conventional Yamaha 10-pin main harness. Digital electronic control and Command Link Plus systems can use different harnesses and connector configurations.

Should I order by horsepower?

No. For an electrical rigging component such as this, confirm the connector type, control system, original part number, and required harness length rather than ordering by horsepower alone.

Is a genuine Yamaha OEM version available?

Yes. Pro Marine USA also carries the genuine Yamaha 688-8258A-60-00 20 FT wiring harness .

How do I know whether 20 feet is long enough?

Measure the required routing distance from the engine to the helm using the path the harness will actually follow. Allow sufficient routing length for bends, secure mounting, and normal engine steering movement.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Part Numbers

6X38258P, 6X3-8258A-10-00, 688-8258A-60-00, 6X3-8258A-00-00, 688-8258A-50-00, 688-8258A-70-00, 6X38258A1000, 6888258A6000, 6X38258A0000, 6888258A5000, 6888258A7000

Searchable Terms

Yamaha 10 pin harness, Yamaha 10-pin main harness, Yamaha 20 foot wire harness, Yamaha 20 ft wiring harness, Yamaha outboard main harness, Yamaha engine to control harness, Yamaha conventional control harness, Yamaha rigging harness, Yamaha remote control wiring harness, Yamaha engine wiring harness, 688-8258A-60-00 replacement, 6X3-8258A-10-00 replacement, Pro Marine 6X38258P, aftermarket Yamaha harness, Yamaha boat wiring harness, 10 pin outboard harness

Item#:
6X38258P
Cross Reference#:
6X3-8258A-00-00
6X3-8258A-10-00
688-8258A-50-00
688-8258A-60-00
688-8258A-70-00
Manufacturer Item:
6X3-8258A-00-00
Manufacturer:
Pro Marine
Available:
In Stock
154.0000
Your Price:
143.00
Each
|◀ ◀ 13 - 24 of 2777 ▶ ▶|
View: