S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Yamaha Outboard Parts
Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.
Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.
Shop Yamaha Outboard Parts by System
- Complete Powerheads
- Control Cables & Boxes
- Cooling System
- Cowlings & Components
- Electrical System
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Rebuilding a Yamaha Outboard?
Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.
Shop Engine Rebuild Parts by Model »Find the Correct Yamaha Outboard Part
Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.
Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Yamaha Outboard Engine Families
Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.
- Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
- Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
- V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
- VMAX SHO: performance-oriented Yamaha SHO applications
- HPDI: high-pressure direct-injection Yamaha 2-stroke applications
- High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
- Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
- Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
- Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
- Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
- Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
- Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
- Genuine Yamaha OEM and aftermarket replacement options for many applications.
- Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component.
- Dealer pricing available for qualified marine businesses.
- Large selection of Yamaha service kits and repair components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Yamaha outboard part?
Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.
Can I search Yamaha parts by OEM part number?
Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.
Do Yamaha outboard parts vary by model and year?
Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.
Do you carry Yamaha engine rebuild parts?
Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.
Do you carry both OEM and aftermarket Yamaha parts?
Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.
What Yamaha parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
6FJ-45300-03-8D
6P2-45300-20-8D
6P2-45300-21-8D
6S1-45300-21-8D
6S1-45300-22-8D
6S1-45300-23-8D
69J-45300-20-8D
69J-45300-21-8D
69J-45300-22-8D
69J-45300-23-8D
69J-45300-24-8D
69J-45300-24-8D
69J-45300-25-8D
69J-45300-25-8D
69J-45300-25-8D
69J-45300-25-8D
99999-04542-00
GLM Marine Water Pump Washer
Yamaha 90-300HP & Mercury FourStroke Water Pump Washer
The GLM 90201GM Driveshaft Water Pump Washer is an aftermarket replacement for Yamaha OEM 90201-22M01-00 and Mercury OEM 8556822. This washer is used in the lower unit water pump assembly and is commonly serviced with the impeller, wear plate, housing, and related driveshaft components.
This GLM version is a good choice for boat owners and repair shops looking for a practical aftermarket replacement during water pump service on many Yamaha 90-300HP and Mercury FourStroke applications.
OEM Numbers & Cross References
Yamaha identifies this component as a plate washer / water pump housing plate washer under OEM number 90201-22M01-00. Mercury and Mariner cross references include 8556822 and 12-8556822.
| Type | Part Number |
|---|---|
| GLM Marine | 90201GM |
| Yamaha OEM | 90201-22M01-00 |
| Mercury / Mariner OEM | 8556822 |
| Mercury / Mariner OEM | 12-8556822 |
| Sierra | 18-90201 |
| Sierra Cross Reference | 18-9078 / 18-9079 |
Compatible Applications
Fitment should be confirmed by matching the original OEM number. Yamaha 90201-22M01-00 is listed across many Yamaha water pump and gearcase applications, including 115HP through 250HP models in detailed OEM fitment listings, while aftermarket fitment data also identifies Yamaha 2-stroke 115-300HP, Yamaha 4-stroke 115-225HP, and Mercury 225 EFI FourStroke applications. :contentReference[oaicite:0]{index=0}
| Engine Family | Common Applications |
|---|---|
| Yamaha 2-Stroke | 115HP-300HP applications using OEM 90201-22M01-00 |
| Yamaha 4-Stroke | 115HP-225HP applications using OEM 90201-22M01-00 |
| Yamaha VMAX / HPDI / OX66 | Common 150HP-300HP water pump applications |
| Yamaha F-Series | Common F115, F150, F200, F225 applications |
| Mercury FourStroke | Mercury 225 EFI FourStroke, serial number 0T653945 & up |
| Mercury / Mariner | Applications using OEM 8556822 or 12-8556822 |
Water pump washers can vary by gearcase, driveshaft, and water pump housing design. Always confirm your original OEM part number before ordering.
This GLM washer replaces Yamaha 90201-22M01-00 and Mercury 8556822 / 12-8556822.
Also Available in Sierra Brand
Sierra 18-90201 Water Pump Washer
Prefer Sierra? We also stock the Sierra 18-90201 version of this Yamaha and Mercury water pump washer for the same OEM cross references.
Where This Washer Is Used
This washer is used in the water pump and driveshaft area of the lower unit. It helps maintain the correct stack-up of components in the pump assembly, supporting proper fitment of the housing, plate, impeller, and related hardware.
Because the washer is small and inexpensive, many technicians inspect or replace it during water pump service instead of reusing a worn, corroded, or distorted washer.
GLM 90201GM Features
- Aftermarket replacement from GLM Marine
- Replaces Yamaha OEM 90201-22M01-00
- Replaces Mercury / Mariner OEM 8556822 and 12-8556822
- Used in water pump and driveshaft service
- Common on many Yamaha 2-stroke and 4-stroke outboard applications
- Common on Mercury 225 EFI FourStroke applications using the listed OEM number
- Sierra alternative linked above
FAQ
What OEM numbers does GLM 90201GM replace?
GLM 90201GM replaces Yamaha 90201-22M01-00 and Mercury / Mariner 8556822 or
12-8556822.
Is this the same as the Sierra washer?
It is the GLM version of the same application family. The Sierra 18-90201
version is linked above.
What Yamaha engines commonly use this washer?
It is commonly listed for many Yamaha 2-stroke 115-300HP and Yamaha 4-stroke
115-225HP water pump applications using OEM 90201-22M01-00.
Does this fit Mercury outboards?
Yes, when your Mercury or Mariner application uses OEM number 8556822 or
12-8556822. It is commonly listed for Mercury 225 EFI FourStroke applications.
Should this washer be replaced during water pump service?
Replace it if it shows wear, corrosion, distortion, or damage. Always follow
your service manual and parts diagram.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
90201GM, GLM 90201GM, Sierra 18-90201, 18-90201, 18-9078, 18-9079, Yamaha 90201-22M01-00, Mercury 8556822, Mercury 12-8556822, Yamaha water pump washer, Yamaha driveshaft washer, Yamaha plate washer, Yamaha F115 water pump washer, Yamaha F150 water pump washer, Yamaha F200 water pump washer, Yamaha F225 water pump washer, Yamaha VMAX water pump parts, Yamaha HPDI water pump washer, Mercury 225 EFI FourStroke water pump washer
8556822
90201-22M01-00
GLM Marine Cooling System Component
Yamaha F115-F300 & Mercury 225 Water Pump Spacer
The GLM 9075GM Water Pump Spacer is a replacement cooling system component designed for numerous Yamaha four-stroke outboards and select Mercury FourStroke models. Replacing Yamaha OEM 61A-45538-00-00 and Mercury OEM 888690, this spacer helps maintain proper positioning of critical water pump components within the lower unit.
Whether you're rebuilding a complete water pump assembly or replacing worn cooling system components during routine maintenance, this GLM spacer offers a dependable aftermarket solution for many Yamaha and Mercury applications.
OEM & Cross Reference Numbers
| Type | Part Number |
|---|---|
| GLM Marine | 9075GM |
| Yamaha OEM | 61A-45538-00-00 |
| Mercury OEM | 888690 |
Compatible Applications
Yamaha OEM number 61A-45538-00-00 is used across a large number of Yamaha four-stroke outboards. Mercury OEM 888690 references the same component used in select Mercury FourStroke applications.
| Manufacturer | Models |
|---|---|
| Yamaha | F115, LF115 |
| Yamaha | F150, LF150 |
| Yamaha | F175, LF175 |
| Yamaha | F200, LF200 |
| Yamaha | F225, LF225 |
| Yamaha | F250, LF250 |
| Yamaha | F300, LF300 |
| Mercury | 225 EFI FourStroke (0T653945 & Up) |
Yamaha and Mercury used multiple lower unit and water pump designs over the years. Always match your original OEM part number or consult your engine parts diagram before ordering replacement cooling system components.
This spacer replaces Yamaha 61A-45538-00-00 and Mercury 888690.
Product Specifications
- Brand: GLM Marine
- Part Number: 9075GM
- Part Type: Water Pump Spacer
- Replaces Yamaha: 61A-45538-00-00
- Replaces Mercury: 888690
- Location: Water Pump Assembly
- Application: Cooling System Service & Water Pump Rebuilds
Also Available in Pro Marine Brand
Pro Marine 9075P Water Pump Spacer
Prefer Pro Marine parts? We also stock the Pro Marine version of this water pump spacer. It replaces the same Yamaha and Mercury OEM numbers and fits the same applications.
Why Replace a Water Pump Spacer?
During water pump service, technicians often inspect the spacer plate for corrosion, wear, pitting, or deformation. Because the spacer helps maintain proper alignment between the impeller housing, wear plate, and other cooling system components, damage can contribute to reduced water pump efficiency.
Replacing worn cooling system components during maintenance can help avoid cooling issues and reduce the likelihood of premature water pump failure.
GLM Water Pump Spacer Features
- Direct replacement for Yamaha 61A-45538-00-00
- Direct replacement for Mercury 888690
- Designed for water pump rebuild and cooling system service
- Fits many Yamaha F115-F300 and LF-series outboards
- Compatible with Mercury 225 EFI FourStroke applications using OEM 888690
- Precision manufactured aftermarket replacement
- Popular choice for preventative maintenance repairs
Frequently Asked Questions
What does a water pump spacer do?
The spacer helps position and support components within the water pump assembly to maintain proper alignment and cooling system operation.
Which Yamaha engines commonly use this spacer?
Common applications include Yamaha F115, F150, F175, F200, F225, F250, and F300 outboards, including many LF-series models.
Does this fit Mercury outboards?
Yes. Mercury OEM 888690 is used on select Mercury 225 EFI FourStroke models and cross references directly to this spacer.
When should I replace a water pump spacer?
Replacement is recommended whenever corrosion, pitting, excessive wear, or physical damage is found during water pump inspection.
Is the Pro Marine version available?
Yes. The Pro Marine 9075P version is linked above if you prefer that brand.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 within the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Most orders placed before 5:30 PM EST ship the same business day.
- Typical transit time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new and unused.
- Installed parts are not eligible for return.
- Return authorization required before returning merchandise.
Need help?
Contact Us
Phone: 941-721-3000
Searchable Terms
9075GM, GLM 9075GM, Yamaha 61A-45538-00-00, Mercury 888690, Yamaha F115 water pump spacer, Yamaha F150 water pump spacer, Yamaha F175 water pump spacer, Yamaha F200 water pump spacer, Yamaha F225 water pump spacer, Yamaha F250 water pump spacer, Yamaha F300 water pump spacer, Mercury 225 EFI FourStroke water pump spacer, Yamaha impeller spacer, water pump rebuild components, cooling system repair parts, GLM marine cooling system parts
45538
61A-45538-00-00
888690
9-43711
61A-45538-00-00
888690
809086
18-5132
63V-85540-00-00
63V-85540-01-00
63V-85540-02-00
63V-85540-03-00
63V-85540-10-00
17-69511
18-5131
43077M
43077T
695-85540-10-00
695-85540-11-00
695-85540-12-00
96450M
31800-94400
31800-94401
31800-95501
31800-95502
31800-95510
5030783
6G1-8194A-10-00
6G1-81940-00-00
6G1-81941-10-00
8M0098898
825096
825096T
825096T01
84932M
881352T
93656M
95642M
0769095
18-9126-9
6D0-11646-01-00
6D0-11646-02-00
6D0-11646-03-00
67-85168 1