S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Inboard Marine Engine & Drive Parts For Mercruiser, Volvo, OMC, PCM
Shop inboard and sterndrive marine parts for maintenance, troubleshooting, repair, and full engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine for Mercruiser, Volvo, OMC, Crusader, Pleasurecraft, Indmar, and Chrysler marine engine applications.
Browse marine engine parts by brand and engine system, including cooling systems, ignition and electrical components, fuel delivery parts, exhaust components, internal engine parts, sterndrive and lower drive components, gaskets, seals, steering components, service kits, oil change kits, and rebuild parts.
Shop Inboard Categories
Mercruiser Engine Cooling, fuel, ignition, exhaust, and engine parts 
Mercruiser Drive Driveshaft housing, lower gearcase, transom, and trim parts 
Volvo Engine Volvo cooling, electrical, exhaust, and internal engine parts 
Volvo Drive Volvo drive housing, gearcase, transom, and trim components 
OMC Engine OMC fuel, cooling, electrical, exhaust, and engine parts 
OMC Drive OMC drive housing, lower gearcase, transom, and trim parts 
Crusader Engine Crusader cooling, fuel, ignition, exhaust, and engine parts 
Pleasurecraft Engine Pleasurecraft marine engine maintenance and repair parts 
Indmar Engine Indmar cooling, fuel, electrical, and engine components 
Chrysler Engine Chrysler marine engine maintenance and rebuild parts Common Inboard and Sterndrive Parts Found in This Category
- Water pumps, impellers, thermostats, manifolds, and cooling system parts
- Fuel pumps, carburetor kits, injectors, filters, and fuel delivery components
- Ignition coils, distributors, sensors, alternators, starters, and electrical parts
- Pistons, bearings, crankshafts, gaskets, seals, and engine rebuild components
- Bellows, gimbal bearings, shift cables, trim parts, and sterndrive components
- Exhaust manifolds, risers, couplers, and marine exhaust parts
- Oil change kits, filters, spark plugs, lubricants, and routine service items
Common Inboard and Sterndrive Problems and Where to Start
- Overheating: inspect impellers, water pumps, thermostats, manifolds, and cooling passages.
- Hard starting or rough idle: check ignition components, carburetor parts, fuel delivery systems, and sensors.
- Water intrusion into the drive: inspect bellows, seals, gimbal bearings, and sterndrive housing components.
- Loss of power or engine noise: inspect compression, bearings, gaskets, pistons, and internal engine components.
- Drive vibration or shifting issues: inspect couplers, shift cables, u-joints, gears, and lower drive components.
Frequently Asked Questions
What is the difference between OEM and aftermarket marine parts?
OEM parts are produced by the original engine manufacturer. Aftermarket parts are replacement parts produced by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products for marine maintenance, repair, and rebuild applications.
How do I find the correct inboard or sterndrive parts?
Use your engine model number, serial number, drive model, and horsepower information to confirm fitment. Sterndrive applications may also require the drive serial number for accurate parts matching.
What brands are included in this category?
This category includes Mercruiser, Volvo, OMC, Crusader, Pleasurecraft, Indmar, and Chrysler marine engine applications.
What are common signs my sterndrive needs service?
Common warning signs include overheating, water in gear lube, vibration, difficult shifting, drive noise, poor acceleration, bellows leaks, and excessive corrosion.
Are aftermarket sterndrive and inboard parts reliable?
Yes. Quality aftermarket marine parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many marine engine and sterndrive repair applications.
Tip: Before ordering sterndrive or inboard parts, verify the engine model, serial number, and drive model information whenever possible.
8M0057676
8M0121387
8M0121387
8M0132733
8M0132733
8M0158586
8M0235171
23140
68100
681001
F8077
F8186
0311598
0777517
12-19183
18-2945
18-2945
19183
19183B
19183K02
19183Q02
191832
191833
20260
20260B
307552
311598
31170
3852105
500383
6508572
777517
8M0187157
9-60101
44491A1
8M0063266
F50109
18-2244
20259
22420
28634
28634A1
79953
79953A2
79953K04
79953Q04
79953Q2
79953T2
816610A1
816610A2
9-72650
Fits Yamaha, Mercury, Sport Jet & MerCruiser EFI Applications
Compatible with Yamaha 150-250 EFI, Mercury 150-250 EFI, Sport Jet 240, and MerCruiser 7.4L / 8.2L applications. The Pro Marine 8090P Electric Fuel Pump is an aftermarket replacement electric fuel pump designed for select marine EFI systems. It is a strong option when replacing a worn or failing fuel pump and is commonly searched by OEM number 67H-13907-00-00.
Compatibility
This electric fuel pump is used on a range of Yamaha, Mercury, Sport Jet, and MerCruiser EFI applications. It replaces several OEM and aftermarket fuel pump numbers commonly used in marine EFI fuel systems.
Application Chart
| Brand | Application | HP / Engine | Fuel System | Notes |
|---|---|---|---|---|
| Yamaha | EFI Outboard | 150-250 HP | EFI | Electric fuel pump replacement |
| Mercury | EFI Outboard | 150-250 HP | EFI | Electric fuel pump replacement |
| Sport Jet | Jet Drive | 240 | EFI | Electric fuel pump replacement |
| MerCruiser | Sterndrive / Inboard | 7.4L | EFI | Electric fuel pump replacement |
| MerCruiser | Sterndrive / Inboard | 8.2L | EFI | Electric fuel pump replacement |
Always confirm compatibility using your engine model, serial number, and current part number before ordering.
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 8090P |
| Cross Reference # | 18-7341 |
| Cross Reference # | 600-110-01 |
| Cross Reference # | 65L-13907-00-00 |
| Cross Reference # | 66K-13907-00-00 |
| Cross Reference # | 67H-13907-00-00 |
| Cross Reference # | 808505 |
| Cross Reference # | 808505T |
| Cross Reference # | 808505T01 |
| Cross Reference # | 809088 |
| Cross Reference # | 809088T |
| Cross Reference # | 809088T1 |
| Cross Reference # | 827682 |
| Cross Reference # | 827682T |
What This Part Is Used For
The electric fuel pump supplies pressurized fuel to the EFI system so the engine can start, idle, and run properly. When a fuel pump becomes weak or fails, common symptoms can include hard starting, fuel pressure problems, hesitation, or loss of power.
Replacing a failing fuel pump can help restore steady fuel delivery and improve overall reliability. Because this pump crosses to several OEM numbers, matching by part number is one of the best ways to confirm fitment before ordering.
Frequently Asked Questions
What does this fuel pump fit?
This pump is listed for Yamaha 150-250 EFI, Mercury 150-250 EFI, Sport Jet 240, and MerCruiser 7.4L / 8.2L applications.
Is this an electric or mechanical fuel pump?
This listing identifies the 8090P as an electric fuel pump.
Is this OEM or aftermarket?
This listing identifies the 8090P as an aftermarket fuel pump sold by Pro Marine.
What numbers does this pump replace?
Common cross references include 18-7341, 600-110-01, 65L-13907-00-00, 66K-13907-00-00, 67H-13907-00-00, 808505, 809088, and 827682.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on qualifying orders over $100.
- Free ground shipping applies to stocking parts only and requires a commercial shipping address.
- Oversize, overweight, special-order, oil, and fluid items may not qualify for free shipping.
- Orders are shipped UPS by default unless other arrangements are made.
- Orders received by 5:00 PM EST typically ship the same business day.
- Typical ground delivery time is 1-5 business days.
30-Day Return Policy
- Most standard items may be returned within 30 days of purchase.
- Items must be unused, uninstalled, and in original packaging.
- Items must be in resalable condition.
- A Return Authorization (RMA) is required before sending anything back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
Pro Marine Part: 8090P
Cross Reference #: 18-7341, 600-110-01, 65L-13907-00-00, 66K-13907-00-00, 67H-13907-00-00, 808505, 808505T, 808505T01, 809088, 809088T, 809088T1, 827682, 827682T
Common Search Terms: 8090P electric fuel pump, 67H-13907-00-00 fuel pump, Yamaha 150-250 EFI fuel pump, Mercury 150-250 EFI fuel pump, MerCruiser 7.4L fuel pump
600-110-01
65L-13907-00-00
66K-13907-00-00
67H-13907-00-00
67H-13907-01-00
808505
808505T
808505T01
809088
809088T
809088T1
827682
827682T
14834A1
18-2375
21731
67892
67892A05
67892A06
67892A1
8M0058389
9-72651
0900097
0976669
121191
18-6020
802391
802391T
900097
976669
0769091
18-9127-9
Genuine Mercury Marine Bulk Fuel Hose
Mercury OEM 5/16" Silver Fuel Hose - Sold by the Foot
This Mercury OEM 5/16" silver fuel hose is a genuine Mercury Marine bulk fuel line for building, repairing or replacing 5/16" fuel-hose assemblies on compatible Mercury outboard applications.
The hose is sold by the foot, allowing you to purchase the length needed for your boat instead of being limited to a preassembled fuel-line length.
Pro Marine also stocks the correct Oetiker 4-145 ear clamp, a compatible 5/16" primer bulb, Oetiker installation tools and alternative marine fuel hose for Type A and Type B applications.
Brand: Mercury Marine
Type: Genuine Mercury OEM Fuel Hose
Inside Diameter: 5/16"
Color: Silver
Sold: By the Foot
Recommended Clamp: Oetiker 4-145
Recommended Primer Bulb: Pro Marine 8004 - 5/16"
How to Order Mercury Bulk Fuel Hose
This Mercury fuel hose is sold by the foot. Enter the quantity based on the continuous length of hose needed for your installation.
For example, if you need 6 feet of fuel line, order a quantity of 6.
Genuine Mercury Marine Fuel Hose
This hose is an OEM option for customers who prefer to use Mercury Marine fuel hose when servicing or building a Mercury outboard fuel-line system.
Its 5/16" inside diameter allows it to be paired with compatible 5/16" fuel-system components, including the Pro Marine 8004 primer bulb.
The 5/16" measurement refers to the hose's inside diameter. Different 5/16" fuel hoses can have different wall thicknesses and outside diameters.
This Mercury silver fuel hose uses the Oetiker 4-145 ear clamp. Do not substitute the 4-153 clamp used with our MPI 315-056 5/16" Type B hose simply because both hoses have a 5/16" inside diameter.
Complete Your Mercury 5/16" Fuel Line
Oetiker 4-145 Ear Clamp - 10 Pack
The matching Oetiker ear clamp for this Mercury OEM 5/16" silver fuel hose.
View Oetiker 4-145 Clamp
Pro Marine 8004 - 5/16" Primer Bulb
Compatible 5/16" primer bulb for building or servicing an outboard fuel-line assembly using 5/16" hose.
View 5/16" Primer Bulb
Oetiker Standard Jaw Pincer Tool
Standard-jaw pincer for properly closing Oetiker ear clamps during fuel-line assembly and repair.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool
An assortment of commonly used Oetiker clamp sizes with the installation tool included. A convenient option for marine shops, technicians and customers working with multiple fuel-hose sizes.
View Oetiker Clamp PackOther 5/16" Marine Fuel Hose Options
Fuel-hose selection should be based on more than inside diameter. The required hose classification and construction depend on the location and design of the boat's fuel system.
MPI 5/16" Type B1/B2 Fuel Hose
5/16" USCG Type B1/B2 bulk marine fuel hose for exposed and above-deck applications where Type B hose is appropriate.
Matching Clamp: Oetiker 4-153
View 5/16" Type B Fuel Hose
5/16" Type A1/A2 Marine Fuel Hose
5/16" Type A marine fuel hose for installations requiring the additional Type A fire-resistant classification, including applicable enclosed and below-deck fuel-system installations.
View 5/16" Type A Fuel HoseMercury OEM vs. MPI 5/16" Fuel Hose
| Fuel Hose | Inside Diameter | Matching Oetiker Clamp |
|---|---|---|
| Mercury OEM Silver Fuel Hose | 5/16" | 4-145 |
| MPI 315-056 Type B Fuel Hose | 5/16" | 4-153 |
Both hoses have a 5/16" inside diameter, but they do not use the same Oetiker clamp. Always match the clamp to the specific hose being installed.
What This Fuel Hose is Used For
Mercury OEM 5/16" bulk fuel hose can be used when building, replacing or repairing compatible Mercury outboard fuel-line assemblies.
Bulk hose gives boat owners and marine technicians the flexibility to select the required length and combine it with the appropriate primer bulb, fittings, connectors and clamps for the specific installation.
Building a Mercury 5/16" Fuel Line
Depending on the installation, a complete fuel-line setup may require:
- Mercury OEM 5/16" silver fuel hose
- 5/16" primer bulb
- Correct engine-side fitting or fuel connector
- Correct tank-side fitting or connection
- Oetiker 4-145 ear clamps
- Oetiker pincer tool
Key Features & Benefits
- Genuine Mercury Marine fuel hose
- 5/16" inside diameter
- Silver Mercury OEM hose
- Sold by the foot for custom-length installations
- Ideal for building and repairing compatible Mercury fuel lines
- Matching Oetiker 4-145 clamps available
- Compatible 5/16" primer bulb available
- Oetiker installation tool and complete clamp assortment available
- 5/16" Type A and Type B alternative hoses available
Need Help Choosing the Right Marine Fuel Hose?
Choosing the correct marine fuel line depends on hose diameter, installation location, fuel-hose classification, fittings, primer bulb and the outside diameter required for the correct clamp.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is this Mercury fuel hose?
This Mercury fuel hose has a 5/16" inside diameter.
Is this genuine Mercury fuel hose?
Yes. This listing is for genuine Mercury Marine OEM fuel hose.
Is the Mercury hose sold by the foot?
Yes. Order the quantity corresponding to the number of feet required for
your installation.
Which Oetiker clamp fits this Mercury hose?
Use the
Oetiker 4-145 ear clamp
with this Mercury OEM silver fuel hose.
Which primer bulb fits this hose?
The
Pro Marine 8004 5/16" Primer Bulb
matches the hose's 5/16" inside diameter.
Can I use an Oetiker 4-153 clamp on this hose?
The recommended clamp for this Mercury OEM hose is
Oetiker 4-145. The larger 4-153 clamp is matched to
Pro Marine's MPI 315-056 Type B 5/16" hose.
Why do two 5/16" fuel hoses use different clamps?
5/16" describes the hose's inside diameter. Different hose constructions
can have different wall thicknesses and outside diameters, which changes
the required clamp size.
What if I need 5/16" Type B fuel hose?
Use the
MPI 315-056 5/16" Type B1/B2 Fuel Hose
for appropriate exposed and above-deck Type B applications.
What if I need Type A fuel hose?
Pro Marine stocks
5/16" Type A1/A2 Marine Fuel Hose
for installations requiring the Type A classification.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury 100 fuel hose, Mercury OEM fuel hose, Mercury silver fuel line, Mercury silver fuel hose, 5/16 Mercury fuel hose, 5/16 Mercury fuel line, Mercury outboard fuel hose, Mercury bulk fuel line, Mercury fuel hose by the foot, OEM Mercury fuel line, outboard fuel line, boat fuel hose, 5/16 marine fuel hose, Oetiker 4-145, 4-145 fuel hose clamp, 5/16 primer bulb, Mercury primer bulb hose, bulk marine fuel hose
8M0038500