S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Marine Battery Cables – Chrysler Force
Shop marine battery cables for Chrysler Force outboards. Battery cables deliver starting and charging power between the battery, engine, and onboard electrical system. Replacing corroded, loose, or undersized cables can improve cranking performance and reduce voltage drop.
How to Choose the Correct Battery Cable
- Select the correct length: Measure the cable route and allow proper bend radius without tension.
- Choose proper gauge: Higher horsepower engines and longer cable runs require heavier gauge wire to minimize voltage drop.
- Use marine-grade materials: Tinned copper and sealed terminals help resist corrosion.
- Verify terminal type: Match lug size and battery post style to your application.
Not sure what gauge wire you need? Refer to our Marine Wire Selection Guide for help choosing the correct wire size and marine-grade materials.
Common Signs of Failing Battery Cables
- Slow cranking or clicking when starting
- Voltage drop while cranking
- Corrosion buildup at terminals
- Intermittent power loss to ignition or accessories
Inspect both positive and negative cables along with engine ground connections when diagnosing starting or charging issues.
18-3885
333554
340116
35970
777478
879514
9-63824
315869
34850
175019
18-5645
376850
385401
386591
392133
585061
586278
Engine Rebuild Kit 1530K Johnson Evinrude 90 140 HP V4 1976-1988
The Pro Marine 1530K Engine Rebuild Kit provides the major internal components required to rebuild Johnson and Evinrude V4 crossflow outboard engines produced from 1976 through 1988 in the 90-140 horsepower range.
This .030 over Vertex rebuild kit is designed for engines that have been bored oversize during machine work. The kit includes oversize pistons, rod bearings, crankshaft bearings, seals, and a complete powerhead gasket set required during a full engine rebuild.
Available Bore Size Options
This engine rebuild kit is available in multiple bore sizes depending on your cylinder condition after machining.
| Part Number | Bore Size | Description |
|---|---|---|
| 1500K | Standard | Standard bore rebuild kit for engines that have not been bored oversize |
| 1520K | .020 Over | For engines bored .020 inches oversize during cylinder machining |
| 1530K | .030 Over | For engines bored .030 inches oversize during cylinder machining |
Always confirm the final cylinder bore size with your machine shop before ordering pistons or rebuild kits.
Compatibility
This rebuild kit fits Johnson and Evinrude V4 crossflow 2-stroke outboard engines produced from 1976-1988 in the 90-140 HP range.
| Brand | Application | HP Engine | Fuel System | Notes |
|---|---|---|---|---|
| Johnson | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
| Evinrude | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
Application Chart
| Brand | Engine Type | Horsepower | Cylinders | Engine Family |
|---|---|---|---|---|
| Johnson | Outboard | 90 HP | V4 | Crossflow |
| Johnson | Outboard | 100 HP | V4 | Crossflow |
| Johnson | Outboard | 115 HP | V4 | Crossflow |
| Johnson | Outboard | 140 HP | V4 | Crossflow |
| Evinrude | Outboard | 90 HP | V4 | Crossflow |
| Evinrude | Outboard | 100 HP | V4 | Crossflow |
| Evinrude | Outboard | 115 HP | V4 | Crossflow |
| Evinrude | Outboard | 140 HP | V4 | Crossflow |
Engine Model Compatibility
This rebuild kit fits many Johnson and Evinrude V4 crossflow outboards produced between 1976 and 1988.
- J90ELCTS
- J90TLCTS
- J100ELCTS
- J100TLCTS
- J115ELCTS
- J115TLCTS
- J140ELCTS
- J140TLCTS
- E90TLCTS
- E100TLCTS
- E115TLCTS
- E140TLCTS
What Is Included
- .030 over Vertex pistons
- Piston ring sets
- Wrist pins
- Piston circlips
- Rod bearings
- Upper main crankshaft bearing
- Center main crankshaft bearings
- Lower main crankshaft bearing
- Complete powerhead gasket set
- Oil seals
- O rings
- Intake gaskets
- Exhaust gaskets
- Cylinder head gaskets
Part Numbers and Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 1530K |
What This Kit Is Used For
The 1530K rebuild kit is used when rebuilding Johnson and Evinrude V4 crossflow outboards that have been bored .030 oversize during cylinder machining.
Replacing pistons, bearings, gaskets, and seals during a powerhead rebuild restores compression and engine reliability while extending engine life.
FAQ
What engines does this rebuild kit fit?
Johnson and Evinrude 90-140 HP V4 crossflow outboards produced between 1976 and 1988.
What does .030 over mean?
It means the cylinders have been machined .030 inches larger than the original bore and require oversize pistons.
Does this kit include pistons and rings?
Yes. Vertex pistons, piston rings, wrist pins, and circlips are included.
Are crankshaft bearings included?
Yes. Upper, center, and lower crankshaft main bearings are included.
Dealer Discounts
Are you in the marine industry? Pro Marine offers wholesale pricing and dealer discounts for marine repair shops, boat dealers, marinas, and parts retailers.
If your business regularly purchases outboard engine parts, we invite you to apply for a Pro Marine dealer account.
Contact Pro Marine
Phone 941-721-3000
Contact Us Online
Shipping Policy
- Free shipping on orders over $100
- Continental United States only
- Orders ship via UPS USPS or FedEx
- Orders placed before 5:30 PM EST typically ship the same day
- Most deliveries arrive within 1-5 business days
Searchable Part Numbers
Pro Marine Part
1530K
Common Searches
Johnson 90 rebuild kit .030
Johnson 100 rebuild kit .030
Johnson 115 rebuild kit .030
Johnson 140 rebuild kit .030
Evinrude 90 rebuild kit .030
Evinrude 115 rebuild kit .030
Evinrude 140 rebuild kit .030
OMC V4 rebuild kit .030
18-3895
332816
332816
35830
35830
879515
332818
35960
586274
778995
763454
312699
393103
393109
40820
777753
878962