S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Honda Outboard Parts
Shop OEM and aftermarket Honda outboard parts for maintenance, repair, troubleshooting, and complete engine service projects. Browse Honda marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine maintenance items.
Pro Marine USA carries Honda outboard engine parts for a wide range of BF-series Four Stroke applications, from portable engines through high-horsepower offshore models. Use your engine model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Honda Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Honda Outboard Part
Honda outboard parts can vary by engine model, horsepower, serial number range, and production year. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original Honda part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Honda and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Honda Outboard Engine Families
Pro Marine supports many Honda BF-series outboards across a wide horsepower range. Always confirm the exact engine model and serial information before ordering parts.
- Portable: Honda BF2 through BF20 applications
- Midrange: BF25 through BF90 engine families
- Large Four Stroke: BF100 through BF150 applications
- High-Horsepower Offshore: BF200, BF225, BF250, and newer large-displacement Honda platforms
- Four Stroke: Honda marine outboards across modern BF-series engine families
Common Honda Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors or carburetors, spark plugs, ignition components, and intake sealing.
- Charging or electrical problems: inspect ignition coils, charging components, sensors, wiring, grounds, and related electrical parts.
- Low compression or power loss: inspect valves, pistons, rings, cylinder condition, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Honda Outboard Parts from Pro Marine USA?
- OEM Honda and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, lower units, fuel systems, electrical systems, steering, trim, and internal engine work.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Honda cooling, fuel, electrical, lower unit, steering, and service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Honda outboard part?
Start with the engine model, horsepower, serial number, and production year whenever available. Use the OEM parts lookup to identify the original Honda part number from the factory diagram.
Can I search Honda parts by OEM part number?
Yes. Enter the Honda OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Honda outboard parts vary by model and serial number?
Yes. Honda may use different components across engines with similar horsepower depending on model, production range, and serial number. Confirm the complete engine identification information before ordering.
Do you carry parts for Honda BF-series outboards?
Yes. Pro Marine carries parts for many Honda BF-series applications, from portable engines through large Four Stroke offshore models, including cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Honda parts?
Yes. Pro Marine offers genuine Honda parts along with aftermarket replacement parts for many common Honda outboard maintenance and repair applications.
What Honda outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service components.
Fitment Tip: Honda outboard parts can vary by model, horsepower, serial number range, and production year. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
SH5150P
64-889933A01
702755021322
8M0227076
Transparent Tygon Bleed Hose
1/8" Tygon Bleed Hose - 10ft Length
Pro Marine Item 259 is transparent 1/8" Tygon bleed hose supplied in a 10-foot length. It is used in compatible marine and PWC applications requiring small-diameter bleed line.
The transparent construction makes it easy to visually inspect fluid inside the hose, which is especially useful when servicing bleed, oil-related or other small fluid-line circuits.
Pro Marine also stocks several other Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare the available options.
Inside Diameter: 1/8"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: Bleed / Small Fluid Line
Item Number: 259
What This Tygon Bleed Hose is Used For
Item 259 is intended for small-diameter marine applications requiring 1/8" transparent Tygon bleed hose.
Small bleed lines can become brittle, cracked, loose or damaged over time. Replacing deteriorated tubing helps maintain proper fluid routing and system operation.
Always verify the required inside diameter and application before replacing an existing hose.
Why Use Transparent Bleed Hose?
Transparent hose allows the line and the fluid inside it to be visually inspected during service.
Depending on the system, this can make it easier to identify:
- Whether fluid is present in the line
- Air pockets
- Visible contamination
- Flow interruptions
- Hose discoloration or deterioration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | View 257 |
| 258 | 5/16" | 10 ft | PWC / Outboard transparent Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | Current Product |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for oil-injection applications.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carb applications.
View 1/4" Tygon Fuel Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.
View 5/16" Tygon Fuel HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included.
View Oetiker Clamp PackChoosing the Correct Bleed Hose Size
Bleed hose should be matched to the exact fitting and fluid-line application. Item 259 has a 1/8" inside diameter.
Do not substitute another hose size simply because it appears close. A proper fit at each connection is important for preventing leaks and maintaining reliable fluid flow.
When Should Bleed Hose Be Replaced?
Small-diameter hose should be inspected during normal system service. Replacement should be considered if the hose shows:
- Cracking or splitting
- Hardening or brittleness
- Fluid leakage
- Loose connections at fittings
- Visible contamination or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 1/8" inside diameter
- 10-foot length
- Transparent Tygon bleed hose
- Suitable for compatible marine and PWC bleed-line applications
- Transparent construction allows visual inspection of fluid in the line
- Additional Tygon fuel-hose sizes available
- Small oil-injection hose option available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Hose?
Hose diameter, hose construction, application and clamp selection should all match the system being serviced.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 259?
Item 259 is 1/8" ID Tygon bleed hose.
How much hose is included?
Item 259 is supplied in a 10-foot length.
Is this hose transparent?
Yes. The transparent construction allows visual inspection of fluid
inside the hose.
Is this a main fuel-supply hose?
No. Item 259 is listed as a bleed hose, not as the
larger main fuel-feed hose used between a tank and engine.
Is this sold by the foot?
No. Item 259 is supplied as a 10-foot length.
Do you carry 3/32" Tygon hose?
Yes. Pro Marine stocks
item 255 3/32" Tygon hose
.
Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks
3/16",
1/4"
and
5/16"
Tygon fuel hose.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible ear-clamp applications.
Do you sell a clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes commonly used clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
259, Tygon 259, 1/8 Tygon hose, 1/8 bleed hose, Tygon bleed hose, marine bleed hose, PWC bleed hose, small fluid hose, transparent bleed line, transparent Tygon tubing, oil bleed hose, marine bleed line, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose
Transparent Tygon Fuel Hose
5/16" Tygon Fuel Hose - 10ft Length
Pro Marine Item 258 is transparent 5/16" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC and outboard fuel-system applications requiring 5/16" inside-diameter hose.
The transparent construction allows technicians to visually inspect fuel inside the line during installation, troubleshooting and routine fuel-system service.
Pro Marine stocks several Tygon hose sizes for fuel, oil-injection and bleed-line applications. Use the size chart below to compare all of the available options.
Inside Diameter: 5/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC / Outboard Fuel Systems
Item Number: 258
Compatible Applications
Item 258 is intended for fuel-system applications requiring 5/16" transparent Tygon fuel hose.
- PWC fuel systems requiring 5/16" ID hose
- Outboard fuel-system applications requiring 5/16" ID hose
- Other compatible small fuel circuits requiring this hose size and material
Always verify the required inside diameter and hose application before replacing an existing fuel line.
Why Use Transparent Tygon Fuel Hose?
Transparent hose makes it easier to visually inspect what is happening inside the fuel line.
Depending on the system, this can help identify:
- Whether fuel is present in the line
- Obvious air pockets
- Fuel-flow interruptions
- Visible contamination
- Hose discoloration or deterioration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | View 257 |
| 258 | 5/16" | 10 ft | PWC / Outboard transparent Tygon fuel hose | Current Product |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose for compatible PWC and MerCruiser pump-to-carburetor applications.
View 1/4" Tygon Fuel Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for marine hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Tygon hose should be matched to the fitting and fuel-system application. Item 258 has a 5/16" inside diameter.
Verify the original hose size before installation. Do not substitute 1/4", 3/16" or another hose diameter simply because the connection appears similar.
When Should Tygon Fuel Hose Be Replaced?
Inspect fuel hose during routine fuel-system service and replace it when deterioration is found.
Common reasons for replacement include:
- Cracks or splits
- Hardening or brittleness
- Fuel leakage
- Loose connections at fittings
- Severe discoloration or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 5/16" inside diameter
- 10-foot length
- Transparent Tygon fuel hose
- Useful for compatible PWC fuel-system applications
- Useful for compatible outboard fuel-system applications
- Transparent construction allows visual inspection of the fuel line
- Additional Tygon fuel-hose sizes available
- Oil-injection and bleed-hose options available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Fuel Hose?
Hose diameter, hose construction, application and clamp selection all need to match the system being serviced.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 258?
Item 258 is 5/16" ID Tygon fuel hose.
How much hose is included?
Item 258 is supplied in a 10-foot length.
Is this hose transparent?
Yes. The transparent construction allows visual inspection of fuel
inside the line.
Does this hose fit PWC applications?
Yes. Item 258 is used in compatible PWC fuel systems requiring
5/16" Tygon hose.
Can this hose be used in outboard fuel systems?
Yes. It is also suitable for compatible outboard applications requiring
5/16" Tygon fuel hose.
Is this hose sold by the foot?
No. Item 258 is supplied as a 10-foot length.
Do you carry smaller Tygon fuel hose?
Yes. Pro Marine stocks
3/16" Tygon fuel hose
and
1/4" Tygon fuel hose
.
Do you carry oil-injection hose?
Yes. Pro Marine stocks
item 255 3/32" Tygon hose
for small oil-injection line applications.
Do you carry Tygon bleed hose?
Yes. Pro Marine stocks
item 259 1/8" Tygon bleed hose
.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp applications.
Do you sell a complete clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes common clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
258, Tygon 258, 5/16 Tygon hose, 5/16 Tygon fuel hose, 5/16 fuel line, PWC fuel hose, PWC fuel line, outboard fuel hose, outboard fuel line, transparent fuel hose, transparent fuel line, Tygon fuel hose, Tygon hose 10ft, marine fuel hose, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 259, 1/8 Tygon bleed hose
Transparent Tygon Fuel Hose
1/4" Tygon Fuel Hose - 10ft Length
Pro Marine Item 257 is transparent 1/4" Tygon fuel hose supplied in a 10-foot length. It is used in compatible PWC fuel systems and in MerCruiser fuel-pump-to-carburetor applications requiring 1/4" inside-diameter hose.
The transparent construction allows visual inspection of fuel inside the hose, making it useful when diagnosing or servicing small fuel-system circuits.
Pro Marine stocks multiple Tygon hose sizes for fuel, oil-injection and bleed-line applications. Compare all available sizes in the chart below.
Inside Diameter: 1/4"
Length: 10 Feet
Material: Tygon
Color: Transparent
Applications: PWC Fuel Systems / MerCruiser Pump-to-Carb Fuel Line
Item Number: 257
Compatible Applications
Item 257 is intended for fuel-system applications requiring 1/4" transparent Tygon fuel hose.
- PWC fuel-line applications requiring 1/4" ID hose
- MerCruiser fuel-pump-to-carburetor hose applications requiring 1/4" ID line
- Other compatible small fuel-system circuits requiring this hose size and material
Always verify the required hose size and application before replacing an existing fuel line.
MerCruiser Pump-to-Carb Fuel Hose
Item 257 is also useful for compatible MerCruiser pump-to-carburetor fuel-line applications requiring 1/4" hose.
This section of the fuel system carries fuel from the fuel pump toward the carburetor. Verify the original hose diameter and fuel-system configuration before installation.
Why Use Transparent Tygon Fuel Hose?
Transparent fuel hose makes it possible to visually inspect the fuel inside the line during service.
Depending on the application, this can help identify:
- Whether fuel is present in the line
- Obvious air pockets
- Fuel-flow interruptions
- Visible contamination
- Line deterioration or discoloration
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent PWC Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC / MerCruiser pump-to-carb Tygon fuel hose | Current Product |
| 258 | 5/16" | 10 ft | Transparent PWC and outboard Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for PWC oil-injection applications. Supplied in a 10-foot length.
View 3/32" Tygon Hose
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel line for compatible PWC fuel-system applications.
View 3/16" Tygon Fuel Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose for compatible PWC and outboard fuel-system applications.
View 5/16" Tygon Fuel Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker clamp installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. Ideal for marine technicians servicing multiple hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Tygon hose should be matched to the fitting and fuel-system application. Item 257 has a 1/4" inside diameter.
Do not substitute a 3/16" or 5/16" hose simply because the fitting appears close in size. The hose must fit the fuel-system connection properly and match the original application.
When Should Tygon Fuel Hose Be Replaced?
Inspect small fuel lines during normal fuel-system maintenance. Replace hose that shows signs such as:
- Cracks or splitting
- Hardening or brittleness
- Fuel leakage
- Loose hose-to-fitting connections
- Severe discoloration or deterioration
- Abrasion or routing damage
Key Features and Benefits
- 1/4" inside diameter
- 10-foot length
- Transparent Tygon fuel hose
- Fits compatible PWC fuel-system applications
- Fits compatible MerCruiser pump-to-carburetor applications
- Transparent construction allows visual inspection of fuel flow
- Additional Tygon fuel-hose sizes available
- Oil-injection and bleed-hose options also available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Fuel Hose?
Hose diameter, hose construction, application and clamp selection all matter when servicing marine fuel systems.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 257?
Item 257 is 1/4" ID Tygon fuel hose.
How much hose is included?
The hose is supplied in a 10-foot length.
Is this hose transparent?
Yes. Its transparent construction allows visual inspection of fuel
inside the hose.
Does this hose fit PWC applications?
Yes. Item 257 is used in compatible PWC fuel systems requiring
1/4" Tygon hose.
Can this be used on MerCruiser engines?
Yes. Item 257 is listed for compatible
MerCruiser fuel-pump-to-carburetor applications
requiring 1/4" hose.
Is this sold by the foot?
No. Item 257 is supplied as a 10-foot length.
Do you carry a smaller Tygon fuel hose?
Yes. Pro Marine stocks
3/16" Tygon fuel hose
.
Do you carry a larger Tygon fuel hose?
Yes. Pro Marine stocks
5/16" Tygon fuel hose
.
Do you sell oil-injection and bleed hose?
Yes. Pro Marine also stocks
3/32" Tygon oil-injection hose
and
1/8" Tygon bleed hose
.
Do you sell Oetiker clamp tools?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp installations.
Do you sell a complete clamp assortment?
Yes. The
Pro Marine Oetiker Clamp Pack with Tool
includes common clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
257, Tygon 257, 1/4 Tygon hose, 1/4 Tygon fuel hose, 1/4 fuel line, PWC fuel hose, PWC fuel line, MerCruiser fuel hose, MerCruiser pump to carb hose, pump to carb fuel line, carburetor fuel hose, transparent fuel hose, transparent fuel line, Tygon fuel hose 10ft, 255, 3/32 Tygon hose, 256, 3/16 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose
7381563
7381567
Transparent Tygon Fuel Hose
3/16" Tygon Fuel Hose - 10ft Length
Pro Marine Item 256 is transparent 3/16" Tygon fuel hose supplied in a convenient 10-foot length. This small-diameter fuel line is commonly used for PWC fuel-system applications where 3/16" inside-diameter hose is required.
The transparent construction makes it easier to visually inspect the fuel line during installation and service and can help identify fuel, air pockets or contamination inside the hose.
Pro Marine stocks several Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications. Use the Tygon hose size chart below to quickly compare the available options.
Inside Diameter: 3/16"
Length: 10 Feet
Material: Tygon
Color: Transparent
Application: PWC Fuel Line
Item Number: 256
What This Tygon Fuel Hose is Used For
Item 256 is used for small-diameter fuel-line applications requiring 3/16" Tygon fuel hose. It is particularly useful when servicing PWC fuel systems that use this hose diameter.
Fuel hose can deteriorate with age and exposure to fuel, heat and the operating environment. Hose that has become hard, brittle, cracked, damaged or otherwise deteriorated should be inspected and replaced as needed.
Always verify the required inside diameter and application before replacing an existing fuel hose.
Benefits of Transparent Tygon Fuel Hose
One of the useful characteristics of transparent Tygon hose is the ability to visually inspect the fuel inside the line.
Depending on the system, this can help during fuel-system diagnosis and service by making it easier to identify whether fuel is present in the line and spot obvious air pockets or contamination.
Pro Marine stocks Tygon hose in several inside diameters. Match the hose size to the fitting and original fuel, oil-injection or bleed-line application.
Use the chart below to compare all of the Tygon hose options in this section.
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | Transparent Tygon small oil-injection hose | View 255 |
| 256 | 3/16" | 10 ft | Transparent Tygon fuel hose for PWC applications | Current Product |
| 257 | 1/4" | 10 ft | Transparent Tygon fuel hose | View 257 |
| 258 | 5/16" | 10 ft | Transparent Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/32" Tygon Hose - 255
Transparent small-diameter Tygon hose for PWC oil-injection line applications. Supplied in a 10-foot length.
View 3/32" Tygon Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose supplied in a 10-foot length.
View 1/4" Tygon Fuel Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose supplied in a 10-foot length.
View 5/16" Tygon Fuel Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
Pro Marine also stocks Oetiker installation tools and a complete clamp assortment for marine fuel-line applications that use Oetiker ear clamps. Always match the clamp to the specific hose and fitting being serviced.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete Pro Marine Oetiker clamp assortment with the installation tool included. A convenient option for shops and technicians working with multiple marine hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Tygon hose should be matched to the inside diameter required by the fitting and fuel system. Item 256 has a 3/16" inside diameter.
When replacing existing hose, verify the original hose diameter and the application before installation. Do not substitute another diameter simply because it appears close in size.
When Should Tygon Fuel Hose Be Replaced?
Inspect small fuel lines as part of normal fuel-system service. Replacement should be considered if the hose shows:
- Cracks or splits
- Hardening or brittleness
- Visible deterioration
- Fuel leakage
- Loose connections at fittings
- Damage from abrasion or improper routing
Key Features and Benefits
- 3/16" inside diameter
- 10-foot length
- Transparent Tygon fuel hose
- Useful for PWC fuel-line applications requiring 3/16" hose
- Transparent construction allows visual inspection of the fuel line
- Multiple additional Tygon hose sizes available
- Oil-injection and bleed-hose options available
- Oetiker pincer tool available for compatible clamp applications
- Complete Oetiker clamp pack with tool available
Need Help Choosing the Right Fuel Hose?
Fuel-line diameter, hose type, fittings and clamp selection all need to match the application. Use the Pro Marine Fuel Line Technical Center to compare the different fuel-hose options and related installation parts.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 256?
Item 256 is 3/16" ID Tygon fuel hose.
How much hose is included?
Item 256 is supplied in a 10-foot length.
Is this hose transparent?
Yes. The transparent construction allows visual inspection of the fuel
line during service.
Is this hose sold by the foot?
No. Item 256 is supplied as a 10-foot length.
Do you have a smaller Tygon hose?
Yes. Pro Marine stocks
item 255 3/32" Tygon hose
for small oil-injection line applications.
Do you carry larger Tygon fuel hose?
Yes. Pro Marine also stocks
1/4" Tygon fuel hose
and
5/16" Tygon fuel hose
.
Do you carry Tygon bleed hose?
Yes. Pro Marine stocks
item 259 1/8" Tygon bleed hose
.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp applications.
Do you sell a clamp assortment?
Yes. The
Pro Marine CLAMP-PACK
includes an assortment of Oetiker clamps and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
256, Tygon 256, 3/16 Tygon hose, 3/16 fuel hose, 3/16 fuel line, PWC fuel hose, PWC fuel line, Tygon fuel hose, transparent fuel hose, transparent fuel line, Tygon tubing, Tygon hose 10ft, small fuel hose, PWC fuel system, 255, 3/32 Tygon hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose
Transparent Tygon Hose
3/32" Tygon Small Oil Injection Hose - 10ft Length
Pro Marine Item 255 is transparent 3/32" Tygon hose supplied in a 10-foot length. This small-diameter flexible tubing is commonly used for PWC oil-injection line applications where 3/32" inside-diameter hose is required.
The transparent construction makes it easier to visually inspect the line and see fluid within the hose, which is particularly useful when servicing small oil-injection systems.
Need another size? Pro Marine stocks a range of Tygon hose from 3/32" through 5/16", including fuel-hose and bleed-hose options. See the complete size chart below.
Inside Diameter: 3/32"
Length: 10 Feet
Material: Tygon
Color: Transparent
Primary Application: PWC Small Oil Injection Line
Item Number: 255
What This Tygon Hose is Used For
Item 255 is intended for small-diameter fluid-line applications requiring 3/32" Tygon tubing. Pro Marine lists this hose primarily for PWC small oil-injection line applications.
Small oil-injection hoses can become hard, brittle, cracked or damaged with age. Replacing deteriorated tubing is an important part of servicing an oil-injected PWC or other compatible system.
Always verify the required inside diameter and application before replacing an existing hose.
Why Use Transparent Tygon Hose?
Transparent tubing provides an important advantage on small fluid lines: it allows the technician to visually inspect what is happening inside the hose.
Depending on the system, this can make it easier to check for fluid in the line and identify obvious air pockets or contamination during service.
Pro Marine stocks multiple transparent Tygon hose sizes for PWC, outboard, fuel-line, oil-injection and bleed-hose applications.
Use the size chart below to compare the available options and go directly to the correct product page.
Tygon Hose Size Guide
| Item | Inside Diameter | Length | Description / Application | Product |
|---|---|---|---|---|
| 255 | 3/32" | 10 ft | PWC small oil-injection line - transparent | View 255 |
| 256 | 3/16" | 10 ft | PWC transparent Tygon fuel hose | View 256 |
| 257 | 1/4" | 10 ft | PWC transparent fuel hose / MerCruiser pump-to-carb applications | View 257 |
| 258 | 5/16" | 10 ft | PWC and outboard transparent Tygon fuel hose | View 258 |
| 259 | 1/8" | 10 ft | Universal transparent Tygon bleed hose | View 259 |
Other Tygon Hose Options
3/16" Tygon Fuel Hose - 256
Transparent 3/16" Tygon fuel hose for PWC applications. Supplied in a 10-foot length.
View 3/16" Tygon Hose
1/4" Tygon Fuel Hose - 257
Transparent 1/4" Tygon fuel hose for PWC and listed MerCruiser pump-to-carb applications.
View 1/4" Tygon Hose
5/16" Tygon Fuel Hose - 258
Transparent 5/16" Tygon fuel hose for PWC and outboard applications. Supplied in a 10-foot length.
View 5/16" Tygon Hose
1/8" Tygon Bleed Hose - 259
Universal transparent 1/8" Tygon bleed hose supplied in a 10-foot length.
View 1/8" Tygon Bleed HoseFuel Line Clamp Tools
When servicing marine fuel, oil-injection and bleed-line systems, Pro Marine also stocks Oetiker clamp tools and a complete clamp assortment for applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer tool for properly closing compatible Oetiker ear clamps used on marine hose connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Pro Marine clamp assortment containing 130 pieces plus the installation tool. A convenient option for marine shops and technicians servicing multiple hose sizes.
View Oetiker Clamp PackChoosing the Correct Tygon Hose Size
Hose size should be matched to the fitting and system being serviced. Do not substitute a larger or smaller hose simply because it appears close in size.
For an existing oil-injection, fuel or bleed-line system, compare the original hose size and application before replacement. If the application is uncertain, verify the engine or PWC model and the required hose size before installation.
Key Features and Benefits
- 3/32" inside diameter Tygon tubing
- 10-foot length
- Transparent construction
- Designed for small oil-injection line applications
- Commonly used in PWC service applications
- Allows visual inspection of fluid inside the hose
- Additional Tygon sizes available from 3/16" through 5/16"
- 1/8" Tygon bleed hose also available
- Oetiker pincer tool available for compatible ear-clamp applications
- Complete Pro Marine Oetiker clamp pack and tool available
Need Help Choosing the Right Hose?
Hose diameter and application both matter when replacing marine fuel, oil-injection and bleed lines. Pro Marine's Fuel Line Technical Center brings together our hose sizes, fuel-line classifications, clamps and related installation information.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Pro Marine item 255?
Item 255 is 3/32" ID Tygon hose supplied in a
10-foot length.
What is 3/32" Tygon hose used for?
Pro Marine lists item 255 primarily for
PWC small oil-injection line applications.
Is the hose transparent?
Yes. Item 255 is transparent, allowing the line and fluid inside it to
be visually inspected.
Is this hose sold by the foot?
No. Item 255 is supplied as a 10-foot length.
Do you carry larger Tygon fuel hose?
Yes. Pro Marine stocks
3/16",
1/4"
and
5/16"
transparent Tygon fuel hose.
Do you carry Tygon bleed hose?
Yes. Pro Marine stocks
item 259 1/8" Tygon bleed hose
in a 10-foot length.
Do you sell an Oetiker clamp installation tool?
Yes. The
Oetiker 14118CJ Standard Jaw Pincer
is available for compatible Oetiker ear-clamp applications.
Do you sell a complete Oetiker clamp assortment?
Yes. The
Pro Marine CLAMP-PACK
contains 130 pieces plus the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers & Terms
255, Tygon 255, 3/32 Tygon hose, 3/32 oil injection hose, 3/32 oil line, PWC oil injection hose, PWC oil line, small oil injection line, transparent Tygon tubing, transparent oil hose, Tygon hose 10ft, Tygon tubing, 256, 3/16 Tygon fuel hose, 257, 1/4 Tygon fuel hose, 258, 5/16 Tygon fuel hose, 259, 1/8 Tygon bleed hose
