S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Honda Outboard Parts
Shop OEM and aftermarket Honda outboard parts for maintenance, repair, troubleshooting, and complete engine service projects. Browse Honda marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine maintenance items.
Pro Marine USA carries Honda outboard engine parts for a wide range of BF-series Four Stroke applications, from portable engines through high-horsepower offshore models. Use your engine model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Honda Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Honda Outboard Part
Honda outboard parts can vary by engine model, horsepower, serial number range, and production year. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original Honda part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Honda and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Honda Outboard Engine Families
Pro Marine supports many Honda BF-series outboards across a wide horsepower range. Always confirm the exact engine model and serial information before ordering parts.
- Portable: Honda BF2 through BF20 applications
- Midrange: BF25 through BF90 engine families
- Large Four Stroke: BF100 through BF150 applications
- High-Horsepower Offshore: BF200, BF225, BF250, and newer large-displacement Honda platforms
- Four Stroke: Honda marine outboards across modern BF-series engine families
Common Honda Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors or carburetors, spark plugs, ignition components, and intake sealing.
- Charging or electrical problems: inspect ignition coils, charging components, sensors, wiring, grounds, and related electrical parts.
- Low compression or power loss: inspect valves, pistons, rings, cylinder condition, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Honda Outboard Parts from Pro Marine USA?
- OEM Honda and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, lower units, fuel systems, electrical systems, steering, trim, and internal engine work.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Honda cooling, fuel, electrical, lower unit, steering, and service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Honda outboard part?
Start with the engine model, horsepower, serial number, and production year whenever available. Use the OEM parts lookup to identify the original Honda part number from the factory diagram.
Can I search Honda parts by OEM part number?
Yes. Enter the Honda OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Honda outboard parts vary by model and serial number?
Yes. Honda may use different components across engines with similar horsepower depending on model, production range, and serial number. Confirm the complete engine identification information before ordering.
Do you carry parts for Honda BF-series outboards?
Yes. Pro Marine carries parts for many Honda BF-series applications, from portable engines through large Four Stroke offshore models, including cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Honda parts?
Yes. Pro Marine offers genuine Honda parts along with aftermarket replacement parts for many common Honda outboard maintenance and repair applications.
What Honda outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service components.
Fitment Tip: Honda outboard parts can vary by model, horsepower, serial number range, and production year. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Power Trim & Tilt Cap with Seals
Replacement Tilt Cap Assembly for Select Yamaha, Suzuki & OMC Showa Trim Systems
This replacement tilt cap with seals assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.
The tilt cap assembly helps seal the hydraulic trim cylinder while supporting proper trim piston movement, hydraulic pressure retention, and reliable trim and tilt operation.
Compatible Applications
| Brand | Model Range | Years | System |
|---|---|---|---|
| Yamaha | 115HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 115HP FourStroke | 2000-2007 | Showa Power Trim & Tilt |
| Yamaha | 130HP | 1997-2004 | Showa Power Trim & Tilt |
| Yamaha | 150HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 150HP FourStroke | 2004-2007 | Showa Power Trim & Tilt |
| Yamaha | 175HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 200HP | 1997-2005 | Showa Power Trim & Tilt |
| Yamaha | 225HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 250HP | 2003-2007 | Showa Power Trim & Tilt |
| Yamaha | 300HP | 2004-2007 | Showa Power Trim & Tilt |
| Suzuki | DF115 | 2015-2024 | Showa Power Trim & Tilt |
| Suzuki | DF140 | 2002-2021 | Showa Power Trim & Tilt |
| Suzuki | DF150 | 2006-2023 | Showa Power Trim & Tilt |
| Suzuki | DF175 | 2006-2023 | Showa Power Trim & Tilt |
| Suzuki | DF200 | 2015-2024 | Showa Power Trim & Tilt |
| Johnson / Evinrude | 70-235HP | 1978-1983 | Showa Power Trim & Tilt |
| Johnson / Evinrude | 140HP FourStroke | 2003-2006 | Showa Power Trim & Tilt |
Because manufacturers used multiple trim system variations depending on model and production range, always verify your engine model, serial number, and trim cylinder diagram before ordering.
OEM Part Numbers & Cross References
| Brand | OEM Part Number |
|---|---|
| Yamaha | 63P-43810-00-00 |
| Yamaha | 63P-43810-09-00 |
| Yamaha | 64E-43810-00-00 |
| Yamaha | 64E-43810-09-00 |
| Yamaha | 64E-43811-01-00 |
| Yamaha | 64E-43811-02-00 |
| Suzuki | 48401-92J00 |
| Suzuki | 48401-92J01 |
| Suzuki | 48401-96J00 |
| Suzuki | 48401-96J01 |
| Suzuki | 48401-96J02 |
| Johnson / Evinrude | 5033932 |
| Johnson / Evinrude | 390006 |
| Johnson / Evinrude | 768745 |
What This Tilt Cap Assembly is Used For
This trim cap assembly is used in compatible hydraulic power trim and tilt systems to support the trim piston and help maintain proper hydraulic sealing.
The cap and seal assembly helps retain hydraulic pressure while allowing smooth piston movement during trim and tilt operation.
Worn or damaged trim caps and seals may cause hydraulic leaks, weak trim performance, erratic movement, or difficulty holding trim position.
Replacing worn hydraulic trim seals and cap components can help restore proper trim operation and reduce hydraulic fluid leakage.
Key Features and Benefits
- Replacement tilt cap assembly with seals
- Fits select Yamaha, Suzuki, Johnson, and Evinrude outboards
- Compatible with Showa hydraulic trim systems
- Helps maintain hydraulic trim pressure
- Supports proper trim piston operation
- Helps reduce hydraulic fluid leakage
- Common repair item during trim cylinder service
- Sold individually
Trim Cap Assembly Details
- Part Type: Tilt Cap with Seals
- Application: Hydraulic Power Trim & Tilt Systems
- System Type: Showa Hydraulic Trim System
- Fits Brands: Yamaha, Suzuki, Johnson, Evinrude
- Use: Trim cylinder sealing and piston support
- Quantity Sold: Each
FAQ
What does this trim cap fit?
This trim cap assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.
Does this include seals?
Yes. This assembly includes the cap and sealing components used in compatible hydraulic trim systems.
Can a bad trim cap cause hydraulic leaks?
Yes. Damaged cap seals can allow hydraulic fluid leakage and may affect trim and tilt performance.
Should I verify my trim assembly before ordering?
Yes. Manufacturers used several trim system variations depending on model and serial range, so diagram verification is recommended.
Is this used on Showa trim systems?
Yes. This part is designed for compatible Showa-style hydraulic trim and tilt assemblies used across multiple marine brands.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic trim components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
63P438, tilt cap with seals, Yamaha trim cap, Suzuki trim cap, Johnson trim cap, Evinrude trim cap, Showa trim cap, hydraulic trim cap, power trim seal cap, Yamaha 63P-43810-00-00, Yamaha 64E-43810-00-00, Suzuki 48401-96J02, Suzuki 48401-92J01, Johnson 5033932, Evinrude 390006, OMC 768745, hydraulic trim seal assembly, trim cylinder cap assembly
48401-92J00
48401-92J00
48401-92J01
48401-96J00
48401-96J01
48401-96J02
5033932
63P-43810-00-00
63P-43810-09-00
64E-43810-00-00
64E-43810-09-00
64E-43811-01-00
64E-43811-02-00
18-3628
18-3628-1
18-43175
19300-ZW9-003
19300-ZY3-023
3NV010300
3NV010300M
3R3010300
3R3010300M
3SA010300
3SA010300M
6G8-12411-00-00
6G8-12411-01-00
6G8-12411-02-00
6G8-12411-03-00
66M-12411-00-00
66M-12411-01-00
8M0119207
825212
825212A1
825212T02
825212001
855676
855676A1
855676002
855676003
855676005
25hp 2004 & Up
30hp 2004 & Up
40hp 2004 & Up
50hp 2004 & Up
75hp 2007 & Up
90hp 2007 & Up
100hp Pre 1997Â
Johnson / Evinrude
10hp aa Model, 2012 (aa, ab, af Model)
15hp aa Model, 2012 (aa, ab Model)
Mercury
8hp 1995-2024
9.9hp 1995-2000
13.5hp 1999-2006
15hp 1998-2021
25hp 1998-2006
30hp 1999-2021
40hp 1999-2006
50hp 1995-2001
75hp 2000-2003
90hp 2000-2003
Â
Â
Â
Tohatsu
8hp 2004-2022
9.8hp 2003-2022
9.9hp 2002-2011Â
15hp 2002-2017
18hp 2002-2008Â
20hp 2008-2017
25hp 2002-2018
30hp 2002-2018Â
60hp 2014-2019
75hp 2014-2019
90hp 2014-2019Â
Yamaha
4hp 1986-1988, 2001-2023
6hp 2001-2022Â
8hp 2001-2024
9.9hp 1985-2024
15hp 1998-2024
20hp 2006-2024Â
25hp 1998-2018
30hp 2005-2024Â
40hp 2000-2024
50hp 1995-2024
60hp 2005-2024
70hp 2012-2023Â
75hp 2005-2024
80hp 1999-2000Â
90hp 2005-2024Â
115hp 2005-2024Â
130hp 2003, 2021
150hp 2003-2010Â
175hp 2003-2005Â
200hp 2003-2019
225hp 2003-2018
250hp 2003-2018
300hp 2004-2009
350hp 2008-2018
425hp 2018-2023Â
450hp 2023
HZW919300003
HZY3-19300-023
HZY319300023
13012
18-3541
18-3611
18-3628
18-3628-1
18-43175
19300-ZW9-003
19300-ZY3-023
3NV010300
3NV010300M
3R3010300
3R3010300M
3SA010300
3SA010300M
5041185
6AH-12411-00-00
6G8-12411-00-00
6G8-12411-01-00
6G8-12411-02-00
6G8-12411-03-00
66M-12411-00-00
66M-12411-01-00
8M0119207
825212
825212A1
825212T02
825212001
8252121A1
855676
855676A1
855676002
855676003
855676005
9-43036
HZX219300003
0769254
17670-90J00
17670-90J01
18-3632
19300-ZX2-003
5033721
5033721
6CB-12411-00-00
67F-12411-00-00
67F-12411-01-00
8M0175321
8M6010296
8M6013865
8556761
60hp 2014-2019
75hp 2014-2019
90hp 2014-2019
115hp 2014-2019Â
150hp 2014-2023
200hp 2014-2023
225hp 2014-2023
250hp 2014-2023Â
Suzuki DF9-300hp
Johnson / EvinrudeÂ
2-6hp
HondaÂ
25hp Up to 2002
30hp up to 2003
35hp 1997
40hp Up to 2003
50hp Up to 2003
75hp 1997-2006
90hp 1997-2006
HZV512155000
0778299
12155-ZV5-000
5031705
55321-87J00
55321-87J01
778299
0319787
0769242
317789
319787
769242
0320608
317782
320608
75132
878232
90455
90455T
90455T1
904551
47448A1
75132
878232
90455
90455T
90455T1
904551
Pro Marine Shift Shaft Seal
Yamaha, Mercury & Honda Shift Shaft Seal Replacement
This Pro Marine replacement shift shaft seal is used on select Yamaha, Mercury, and Honda outboard lower units. It helps seal the shift shaft area to prevent water intrusion and gear lubricant leakage.
Designed as a replacement for Yamaha, Mercury, Honda, Sierra, Mallory, and GLM cross-reference numbers, this seal is commonly used during lower unit reseal, shift shaft service, and gearcase repair.
Compatible Applications
| Brand | Engine Range | Engine Type | Application Notes |
|---|---|---|---|
| Yamaha | 40HP-250HP | 2-Stroke | 1984-Up select models |
| Yamaha | F30-F300 | FourStroke | 1995-Up select models |
| Yamaha SHO | VF90-VF250 | FourStroke SHO | 2010-Up select models |
| Mercury | 50HP-450HP | 3-Cylinder, 4-Cylinder, V6, V8 | Select outboard applications |
| Honda | 75HP-90HP | FourStroke | 1997-1998 select models |
Compatible Shift Shaft Seal Carrier
View Pro Marine 25 Inch Shift Shaft Seal Carrier
Replacing the seal when servicing the carrier is recommended to help maintain proper lower unit sealing.
OEM & Aftermarket Cross Reference Numbers
| Brand / Type | Part Numbers |
|---|---|
| Yamaha | 93106-09014-00 |
| Mercury / Quicksilver | 8M0204708, 816461, 816464, 8164641, 82257M, 916464 |
| Honda | 91253-ZW1-003 |
| GLM / Aftermarket | 85223, 85581 |
What This Shift Shaft Seal is Used For
This shift shaft seal is installed in the lower unit to seal around the shift shaft where it passes through the gearcase housing or seal carrier.
A properly sealing shift shaft seal helps keep water out of the lower unit and helps keep gear lubricant inside the gearcase during operation.
Shift shaft seals are commonly replaced during lower unit resealing, water intrusion repair, shift shaft service, or complete gearcase rebuilds.
Replacing worn, hardened, or leaking seals can help protect internal gears, bearings, and shafts from water-contaminated gear lube.
Key Features and Benefits
- Pro Marine aftermarket replacement shift shaft seal
- Fits select Yamaha, Mercury, and Honda outboards
- Direct replacement for Yamaha OEM 93106-09014-00
- Cross references to Mercury 8M0204708, 816461, 816464, 8164641, and 82257M
- Cross references to Honda 91253-ZW1-003
- Helps prevent water intrusion into the lower unit
- Helps prevent gear lubricant leakage
- Common replacement during lower unit reseal service
Shift Shaft Seal Details
- Brand: Pro Marine
- Part Type: Shift Shaft Seal
- Pro Marine Item Number: 7620
- Manufacturer Item: 93106-09014-00
- Application: Select Yamaha, Mercury, and Honda outboard lower units
- System: Lower Unit / Gearcase
- Use: Shift shaft sealing
- Associated Carrier: 65N-45321-00-00
FAQ
What engines does this shift shaft seal fit?
This seal fits select Yamaha 40HP-250HP 2-stroke models, Yamaha F30-F300 four stroke models, Yamaha VF90-VF250 SHO models, Mercury 50HP-450HP outboards, and Honda 75HP-90HP applications.
Is this a genuine OEM seal?
No. This is a Pro Marine aftermarket replacement seal designed to replace multiple OEM and aftermarket part numbers.
What Yamaha OEM number does this replace?
This seal replaces Yamaha OEM part number 93106-09014-00.
What Mercury part numbers does this replace?
This seal cross references to Mercury and Quicksilver part numbers 8M0204708, 816461, 816464, 8164641, 82257M, and 916464.
Should I replace this seal when replacing the shift shaft seal carrier?
Yes. Replacing the seal during carrier service is recommended to help prevent leaks and water intrusion.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
7620, 93106-09014-00, 8M0204708, 816461, 816464, 8164641, 82257M, 85223, 85581, 91253-ZW1-003, 916464, Yamaha shift shaft seal, Mercury shift shaft seal, Honda shift shaft seal, Yamaha lower unit seal, Mercury lower unit seal, Honda lower unit seal, Pro Marine shift shaft seal, 65N-45321-00-00, Yamaha 25 inch seal carrier, lower unit reseal parts
18-2054
18-8347
508481
76384
8M0204708
816461
816464
8164641
82257M
85223
85581
9-76116
9-76117
9-76423
91253-ZW1-003
916464
93106-09014-00
18-1157
18-1157
30895
30895T
9-75111
9-75111
91057-ZW1-003