S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Honda Outboard Parts
Shop OEM and aftermarket Honda outboard parts for maintenance, repair, troubleshooting, and complete engine service projects. Browse Honda marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine maintenance items.
Pro Marine USA carries Honda outboard engine parts for a wide range of BF-series Four Stroke applications, from portable engines through high-horsepower offshore models. Use your engine model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Honda Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Honda Outboard Part
Honda outboard parts can vary by engine model, horsepower, serial number range, and production year. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original Honda part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Honda and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Honda Outboard Engine Families
Pro Marine supports many Honda BF-series outboards across a wide horsepower range. Always confirm the exact engine model and serial information before ordering parts.
- Portable: Honda BF2 through BF20 applications
- Midrange: BF25 through BF90 engine families
- Large Four Stroke: BF100 through BF150 applications
- High-Horsepower Offshore: BF200, BF225, BF250, and newer large-displacement Honda platforms
- Four Stroke: Honda marine outboards across modern BF-series engine families
Common Honda Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors or carburetors, spark plugs, ignition components, and intake sealing.
- Charging or electrical problems: inspect ignition coils, charging components, sensors, wiring, grounds, and related electrical parts.
- Low compression or power loss: inspect valves, pistons, rings, cylinder condition, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Honda Outboard Parts from Pro Marine USA?
- OEM Honda and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, lower units, fuel systems, electrical systems, steering, trim, and internal engine work.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Honda cooling, fuel, electrical, lower unit, steering, and service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Honda outboard part?
Start with the engine model, horsepower, serial number, and production year whenever available. Use the OEM parts lookup to identify the original Honda part number from the factory diagram.
Can I search Honda parts by OEM part number?
Yes. Enter the Honda OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Honda outboard parts vary by model and serial number?
Yes. Honda may use different components across engines with similar horsepower depending on model, production range, and serial number. Confirm the complete engine identification information before ordering.
Do you carry parts for Honda BF-series outboards?
Yes. Pro Marine carries parts for many Honda BF-series applications, from portable engines through large Four Stroke offshore models, including cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Honda parts?
Yes. Pro Marine offers genuine Honda parts along with aftermarket replacement parts for many common Honda outboard maintenance and repair applications.
What Honda outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service components.
Fitment Tip: Honda outboard parts can vary by model, horsepower, serial number range, and production year. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
64-889931A01
702755021384
0584918
0765841
0765865
584918
765865
810B
810C
883323
883323001
702755021407
Sierra Universal Marine Bleed Hose
Sierra 1/16" ID Bleed Hose - 10ft Roll - 8050
Sierra 8050 is a 1/16" inside-diameter marine bleed hose supplied in a 10-foot roll. This universal replacement bleed line cross references manufacturer number 9938779 along with several related marine bleed-hose numbers.
Small-diameter bleed lines are used throughout compatible marine engine systems to route fluid between engine components. These hoses can harden, crack or deteriorate with age, heat and exposure to fuel or oil.
Pro Marine also stocks 3/32" Sierra bleed hose and 1/8" transparent Tygon bleed hose. Compare all three sizes below.
Inside Diameter: 1/16"
Length: 10 Feet
Brand: Sierra
Manufacturer Item #: 9938779
Application: Universal Marine Bleed Line
Pro Marine Item: 8050
OEM & Cross Reference Numbers
Sierra 8050 cross references the following marine part numbers:
What This Bleed Hose is Used For
Sierra 8050 is used in compatible marine engine applications requiring 1/16" ID bleed hose.
Depending on the engine, small bleed lines can be used within fuel, lubrication, induction or crankcase-routing systems. Their exact function depends on the engine design and hose location.
Always verify the original hose diameter and applicable OEM number before replacing an existing line.
This hose has a 1/16" inside diameter.
Do not substitute 3/32", 1/8" or another hose size simply because it appears close. A proper fit at the bleed fitting is important for preventing leaks and maintaining the intended system operation.
Marine Bleed Hose Size Guide
| Item | Inside Diameter | Length | Type | Product |
|---|---|---|---|---|
| 8050 | 1/16" | 10 ft | Sierra Universal Bleed Hose | Current Product |
| 8048 | 3/32" | 10 ft | Sierra Universal Bleed Hose | View 3/32" Bleed Hose |
| 259 | 1/8" | 10 ft | Transparent Tygon Bleed Hose | View 1/8" Tygon Bleed Hose |
Other Bleed Hose Options
Sierra 3/32" Bleed Hose - 8048
Universal Sierra 3/32" ID bleed hose supplied in a 10-foot roll. Cross references Mercury 892024122 and related bleed-hose numbers.
View 3/32" Bleed Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length for compatible marine and PWC bleed-line applications.
View 1/8" Tygon Bleed HoseSierra Bleed Hose vs. Tygon Bleed Hose
The Sierra 8050 and 8048 products are universal replacement marine bleed hoses with OEM cross-reference numbers, while item 259 is transparent Tygon tubing listed as a 1/8" bleed hose.
These hoses should not be selected by appearance alone. Verify the required inside diameter, original hose construction and OEM reference before installation.
Clamp Tools and Shop Assortment
Pro Marine also stocks Oetiker tools and clamp assortments for marine fuel, oil and hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer for properly closing compatible Oetiker ear clamps used throughout marine fuel and hose systems.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included for marine shops and technicians.
View Oetiker Clamp PackWhen Should Bleed Hose Be Replaced?
Small bleed lines should be inspected during routine engine service, particularly when working on the surrounding fuel, oil or induction system.
Replace bleed hose if you find:
- Cracking or splitting
- Hardening or brittleness
- Fluid leakage
- A loose fit on the hose fitting
- Abrasion or routing damage
- Deterioration caused by age, heat or fluid exposure
Key Features and Benefits
- 1/16" inside diameter
- 10-foot roll
- Sierra aftermarket marine bleed hose
- Universal marine application
- Manufacturer item number 9938779
- Multiple OEM and cross-reference numbers
- 3/32" Sierra bleed hose also available
- 1/8" transparent Tygon bleed hose also available
- Oetiker pincer and clamp assortment available for compatible applications
Need Help Choosing the Right Hose?
Marine bleed, fuel and oil lines may look similar but can have different inside diameters, construction and applications. Always match the hose to the engine requirement.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Sierra 8050?
Sierra 8050 has a 1/16" inside diameter.
How much hose is included?
Sierra 8050 is supplied as a 10-foot roll.
What is the manufacturer item number?
The Sierra manufacturer item number is 9938779.
What numbers does 8050 replace?
Cross references include
54935, 5493576, 5493579, 54936, 55295, 55301, 60079 and 9938779.
Is this a universal bleed hose?
Yes. Pro Marine lists Sierra 8050 as a universal marine bleed hose.
Verify that your application requires 1/16" ID hose before installation.
Do you stock a larger Sierra bleed hose?
Yes. Pro Marine stocks
Sierra 8048 3/32" ID bleed hose
.
Do you stock 1/8" bleed hose?
Yes. Pro Marine stocks
item 259 1/8" Tygon bleed hose
.
Should I replace 1/16" bleed hose with 3/32" hose?
No. Use the hose diameter specified for the engine and fitting. The two
sizes are not automatically interchangeable.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
8050, Sierra 8050, 9938779, 54935, 5493576, 5493579, 54936, 55295, 55301, 60079, 1/16 bleed hose, Sierra bleed hose, marine bleed hose, marine bleed line, universal bleed hose, 1/16 marine hose, engine bleed hose
5493576
5493579
54936
55295
55301
60079
9938779
Sierra Universal Marine Bleed Hose
Sierra 3/32" ID Bleed Hose - 10ft Roll - 8048
Sierra 8048 is a 3/32" inside-diameter marine bleed hose supplied in a 10-foot roll. It is a universal replacement bleed line that cross references Mercury number 892024122 and numerous related Mercury bleed-hose numbers.
Small bleed hoses are used throughout compatible marine engine systems to route fuel, oil or other fluids between components. Because these lines can harden, crack or deteriorate with age, replacing damaged hose is an important part of fuel-system and engine service.
Need another diameter? Pro Marine also stocks 1/16" Sierra bleed hose and transparent 1/8" Tygon bleed hose. See the comparison below.
Inside Diameter: 3/32"
Length: 10 Feet
Brand: Sierra
Manufacturer Item #: 892024122
Application: Universal Marine Bleed Line
Pro Marine Item: 8048
OEM and Cross Reference Numbers
Sierra 8048 / manufacturer number 892024122 cross references the following marine part numbers:
What This Bleed Hose is Used For
Small-diameter bleed hose is used in compatible marine engine systems to connect bleed fittings and route fluid between engine components.
The exact location and function depend on the engine. On many marine engines, bleed-line circuits are part of the engine's fuel, lubrication or crankcase routing system.
Because the same hose diameter can be used in different locations, always verify the original hose size and OEM part number before installation.
This hose has a 3/32" inside diameter.
Bleed hose must fit tightly on the intended fittings. Do not substitute 1/16", 1/8" or another hose diameter simply because it appears close in size.
Marine Bleed Hose Size Guide
| Item | Inside Diameter | Length | Type | Product |
|---|---|---|---|---|
| 8050 | 1/16" | 10 ft | Sierra Universal Bleed Hose | View 1/16" Bleed Hose |
| 8048 | 3/32" | 10 ft | Sierra Universal Bleed Hose | Current Product |
| 259 | 1/8" | 10 ft | Transparent Tygon Bleed Hose | View 1/8" Tygon Bleed Hose |
Other Bleed Hose Options
Sierra 1/16" Bleed Hose - 8050
Universal Sierra 1/16" ID bleed hose supplied in a 10-foot roll for compatible marine engine bleed-line applications.
View 1/16" Bleed Hose
1/8" Tygon Bleed Hose - 259
Transparent 1/8" Tygon bleed hose supplied in a 10-foot length for compatible bleed-line applications.
View 1/8" Tygon Bleed Hose3/32" Sierra Bleed Hose vs. 3/32" Tygon Hose
Pro Marine also stocks item 255 3/32" Tygon hose , but the two products should not automatically be treated as interchangeable.
8048 is the Sierra universal bleed hose that cross references Mercury 892024122 and the listed OEM numbers, while 255 is transparent Tygon tubing primarily listed for small PWC oil-injection applications.
Even though both have a 3/32" inside diameter, select hose based on the intended application and OEM requirement rather than size alone.
Clamp Tools and Shop Assortment
Pro Marine also stocks Oetiker tools and clamp assortments for other marine fuel, oil and hose applications that use Oetiker ear clamps.
Oetiker Standard Jaw Pincer - 14118CJ
Standard-jaw pincer for properly closing compatible Oetiker ear clamps used throughout marine fuel and hose systems.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool - CLAMP-PACK
Complete assortment of common Oetiker clamp sizes with the installation tool included for marine shops and technicians.
View Oetiker Clamp PackWhen Should Bleed Hose Be Replaced?
Small bleed lines should be inspected whenever the surrounding fuel, induction or lubrication system is serviced.
Replacement should be considered when the hose shows:
- Cracking or splitting
- Hardening or brittleness
- Fluid leakage
- Loose fit at the connection
- Abrasion or routing damage
- Visible deterioration from age or heat
Key Features and Benefits
- 3/32" inside diameter
- 10-foot roll
- Sierra marine replacement bleed hose
- Universal marine application
- Manufacturer item number 892024122
- Cross references numerous Mercury 99130-series bleed-hose numbers
- 1/16" Sierra bleed hose also available
- 1/8" transparent Tygon bleed hose also available
- Oetiker pincer and complete clamp assortment available for compatible applications
Need Help Choosing the Right Hose?
Marine bleed, fuel and oil hoses may look similar but can serve very different purposes. Match the inside diameter, hose construction and OEM requirement to the application being serviced.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is Sierra 8048?
Sierra 8048 has a 3/32" inside diameter.
How much hose is included?
The package contains a 10-foot roll.
What is the Sierra manufacturer number?
The manufacturer item number is 892024122.
Does 8048 replace Mercury 892024122?
Yes. 892024122 is one of the primary cross-reference
numbers for Sierra 8048.
Is this a universal bleed hose?
Yes. Pro Marine lists Sierra 8048 as a universal marine bleed hose.
Verify the required 3/32" inside diameter and OEM reference for your
specific installation.
Is this the same as the 3/32" Tygon hose?
Not necessarily. Both have a 3/32" inside diameter, but item 8048 is a
Sierra replacement bleed hose with Mercury cross references, while
item 255 is transparent Tygon tubing primarily listed for small
oil-injection applications.
Do you stock a smaller bleed hose?
Yes. Pro Marine stocks
Sierra 8050 1/16" ID bleed hose
.
Do you stock a larger bleed hose?
Yes. Pro Marine stocks
1/8" Tygon bleed hose
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers and Terms
8048, Sierra 8048, 892024122, F9913046, 60580, 6058078, 60584, 99130, 99130122, 9913015, 9913019, 9913022, 9913028, 9913030, 9913033, 9913045, 9913046, 9913064, 9913065, 9913069, 9913072, 9913076, 9913078, 3/32 bleed hose, Mercury bleed hose, Sierra bleed hose, marine bleed line, 3/32 marine hose, universal bleed hose, Mercury 892024122
60580
6058078
60584
892024122
99130
99130122
9913015
9913019
9913022
9913028
9913030
9913033
9913045
9913046
9913064
9913065
9913069
9913072
9913076
9913078
Genuine Mercury Steering Cylinder Kit
Mercury Verado & Racing V8 200-450HP Steering Cylinder OEM
The Mercury 896500A01 Steering Cylinder Kit is a genuine OEM Mercury steering cylinder kit for Mercury Verado L6, Verado V8, Verado V10, and Mercury Racing V8 450R outboards. This cylinder kit cross references Mercury part numbers 8M0118141, 880659T, and 896500A01.
This OEM steering cylinder is used in the hydraulic steering system and is designed to restore proper steering function, response, and reliability on compatible Mercury Verado and Mercury Racing high-horsepower outboards.
Compatible Applications
| Engine Family | Horsepower Range |
|---|---|
| Mercury Verado L6 | 200HP-350HP |
| Mercury Verado V8 | 200HP-300HP |
| Mercury Verado V10 | 350HP-425HP |
| Mercury Racing V8 | 450R |
Mercury used multiple steering cylinder designs across different Verado and Racing applications. Always verify your engine serial number and original steering cylinder part number before ordering.
This OEM cylinder kit cross references Mercury 896500A01, 8M0118141, and 880659T.
OEM & Cross Reference Numbers
| Type | Part Number |
|---|---|
| Mercury OEM | 896500A01 |
| Mercury OEM | 8M0118141 |
| Mercury OEM | 880659T |
| Pro Marine Reman Alternative | 896500R01 |
Save Money with a Remanufactured Option
Save $$$ Buying Reman - Pro Marine 896500R01
We also carry a remanufactured Pro Marine steering cylinder for this application. The reman unit is a cost-saving alternative to the OEM cylinder and includes a 1-year warranty.
The reman price includes a $200 refundable core charge. When you return your rebuildable core, $200 will be refunded. The core charge process can be avoided by sending your core in before the remanufactured unit ships.
What This Part is Used For
The steering cylinder is part of the hydraulic steering system that controls outboard movement at the transom. A worn, leaking, or damaged steering cylinder can cause steering fluid loss, reduced response, excess play, or unsafe steering performance.
Replacing the steering cylinder with a genuine Mercury OEM kit helps restore factory fit and steering performance on compatible Verado L6, Verado V8, Verado V10, and Mercury Racing V8 450R applications.
Why Choose the OEM Mercury Cylinder?
- Genuine Mercury OEM steering cylinder kit
- Direct replacement for Mercury 896500A01
- Cross references 8M0118141 and 880659T
- Fits Mercury Verado L6, V8, V10, and Racing V8 450R applications
- Factory replacement option for steering system repairs
- Remanufactured Pro Marine alternative linked above
FAQ
What OEM numbers does this steering cylinder replace?
This OEM Mercury steering cylinder kit is listed under 896500A01 and cross
references 8M0118141 and 880659T.
What engines does this fit?
This steering cylinder kit fits Mercury Verado L6, Verado V8, Verado V10,
and Mercury Racing V8 450R applications when the OEM part number matches.
Does this fit Mercury Racing 500R?
No. This listing should not be used for Mercury Racing 500R applications.
Do you offer a lower-cost option?
Yes. The Pro Marine 896500R01 remanufactured steering cylinder is linked above
and includes a 1-year warranty.
How does the reman core charge work?
The remanufactured cylinder price includes a $200 refundable core charge.
Return your rebuildable core and $200 will be refunded.
Can the reman core charge be avoided?
Yes. You can avoid the core charge refund process by sending your rebuildable
core in before the reman unit ships.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return, core, or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
896500A01, 8M0118141, 880659T, 896500R01, Mercury Verado steering cylinder, Mercury Verado L6 steering cylinder, Mercury Verado V8 steering cylinder, Mercury Verado V10 steering cylinder, Mercury Racing 450R steering cylinder, Mercury 200 steering cylinder, Mercury 225 steering cylinder, Mercury 250 steering cylinder, Mercury 300 steering cylinder, Mercury 350 steering cylinder, Mercury 400 steering cylinder, Mercury 425 steering cylinder, Mercury 450R steering cylinder, OEM Mercury steering cylinder, reman Mercury steering cylinder, Verado steering cylinder core charge, $200 core charge, 1 year warranty reman steering cylinder
880659T
896500A01
0765551
120463
120464
120464
18-5750
580339
581027
765551
802353
9-28124