S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
701-48345-30-00
703-48345-00-00
703-48345-01-00
Genuine Yamaha OEM Steering & Control Cable Joint Ball
Yamaha OEM Shaft Ball Joint EU0-61461-30-00
The Yamaha OEM EU0-61461-30-00 Shaft Ball Joint is a genuine Yamaha replacement component used in many Yamaha steering cable, throttle cable, shift cable, and marine control systems.
This genuine Yamaha OEM part supersedes EU0-U1461-30-00 and is commonly found on Yamaha WaveRunner personal watercraft, Yamaha jet boats, and Yamaha marine steering and control cable assemblies.
Compatible Applications
| Brand | Application Type | Common Model Families | System Type |
|---|---|---|---|
| Yamaha | WaveRunner / PWC | SuperJet, WaveRunner, VXR, FX1, Raider, Venture, SUV1200, XLT1200 | Steering & Control Cables |
| Yamaha | Jet Boats | AR210, AR230, AR240, SX210, SX230, SX240, 212X, 242 Limited | Shift & Steering Systems |
| Yamaha | FSH Sport Boats | 190 FSH, 210 FSH, 212 FSH | Control Cable Assemblies |
Yamaha OEM number EU0-U1461-30-00 has been superseded by EU0-61461-30-00.
This OEM Yamaha shaft ball joint is used across hundreds of Yamaha steering and control cable assemblies covering many Yamaha WaveRunner, PWC, jet boat, and sport boat applications.
Always verify your OEM number and cable assembly before ordering.
OEM Part Numbers & Cross References
| Part Type | Part Number |
|---|---|
| Yamaha OEM | EU0-61461-30-00 |
| Yamaha OEM Superseded Number | EU0-U1461-30-00 |
Aftermarket Alternative
Looking for a more affordable aftermarket replacement option?
Pro Marine Aftermarket Shaft Joint Ball 3-12-EU06146
The Pro Marine aftermarket version replaces the same Yamaha OEM numbers and is a cost-effective replacement for many Yamaha steering and control cable applications.
What This Part is Used For
The Yamaha OEM shaft ball joint is used as a linkage connection point within Yamaha steering cable systems, throttle cable systems, shift cable assemblies, and marine control systems.
This component allows smooth articulation and movement between the cable assembly and steering or control mechanisms while maintaining secure operation in marine environments.
Damaged or worn cable joint components can contribute to loose steering, poor throttle response, difficult shifting, or unreliable control system operation.
Key Features & Benefits
- Genuine Yamaha OEM component
- Current Yamaha OEM number EU0-61461-30-00
- Supersedes Yamaha EU0-U1461-30-00
- Used in Yamaha steering and control cable systems
- Fits many Yamaha WaveRunner and PWC applications
- Fits many Yamaha jet boat applications
- Used in steering, shift, and throttle cable assemblies
- OEM factory Yamaha fit and quality
- Aftermarket Pro Marine alternative linked above
Part Details
- Part Number: EU0-61461-30-00
- Superseded Number: EU0-U1461-30-00
- Part Type: Shaft Ball Joint
- Application: Yamaha Steering & Control Cable Systems
- Manufacturer: Yamaha OEM
FAQ
What OEM number does this replace?
EU0-61461-30-00 supersedes Yamaha OEM number EU0-U1461-30-00.
What systems use this shaft ball joint?
This part is commonly used in Yamaha steering cable,
shift cable, throttle cable, and marine control systems.
Does this fit Yamaha WaveRunner models?
Yes. This OEM Yamaha part is used across many Yamaha WaveRunner and personal watercraft applications.
Does this fit Yamaha jet boats?
Yes. This shaft ball joint is also used on many Yamaha jet boat steering and control systems.
Is there a less expensive aftermarket option?
Yes. The Pro Marine aftermarket replacement version is linked above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on qualifying orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST typically ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with fitment or ordering?
Contact Us
Phone: 941-721-3000
Searchable Terms
EU0-61461-30-00, EU0-U1461-30-00, Yamaha OEM shaft ball joint, Yamaha steering cable joint, Yamaha steering cable end, Yamaha throttle cable joint, Yamaha shift cable end, Yamaha control cable connector, Yamaha jet boat steering cable, Yamaha WaveRunner steering cable, Yamaha PWC steering cable, Yamaha SuperJet steering parts, Yamaha AR240 steering cable, Yamaha SX230 steering system, Yamaha marine cable linkage, Yamaha steering linkage joint, Yamaha cable ball joint, Yamaha WaveRunner cable end, genuine Yamaha steering joint, Yamaha OEM marine control cable part, 3-12-EU06146 aftermarket alternative
EU0-61461-30-00
3Y9022340
3Y9022340M
52444
52456
52456A1
55501
55501A1
57250
57250A1
60494
60494A1
60494A4
60494A5
604941
802893
802893A4
802893Q
802893Q01
802893Q4
802893T
805269
805269A4
8052691
806771
807172
807172A4
9-37800
9999937801
9999937851
9999937851M
18458A4
18458Q12
18458Q4
18458T12
18458T4
184584
184585
18-7968
18458A4
18458A4
18458Q12
18458Q4
18458T12
18458T4
184584
184585
9-37806
17808A1
18-7967
18458A1
18458A2
18458A3
18458Q11
18458Q3
18458T11
18458T3
35-18458A 3
35-18458Q 3
9-37805
18458Q12
18458Q4
18458T12
18458T4
184584
184585
MAR-M10EL-00-00
QB1-M10EL-10-00
18-7865
8M0154766
Mercury OEM 881170A15 8-Pin Side Mount Remote Control
The Mercury 881170A15 Side Mount Control is a genuine Mercury OEM remote-control assembly for compatible mechanical rigging systems using an 8-pin electrical connection.
This side-mount control is configured for Gen 1-style mechanical throttle and shift cables, includes a 15-foot harness, and provides power trim and tilt control on the compatible installation.
Product Information
- Part Number: 881170A15
- Brand: Genuine Mercury OEM
- Part Type: Side Mount Remote Control
- Electrical Connection: Mercury 8-Pin
- Control Cable Type: Gen 1 Style
- Harness Length: 15 Feet
- Trim Function: Power Trim and Tilt Control
- Mounting Style: Side Mount
- Aftermarket Alternative: Pro Marine 881170A15P
Important Fitment Note
Do not choose this control by engine horsepower alone. Compatibility depends on the boat's complete Mercury rigging configuration.
This OEM control is for compatible applications requiring a Mercury 8-pin electrical connection, Gen 1-style mechanical control cables, and a 15-foot harness.
Similar Mercury side-mount controls may use a 14-pin connection, different cable generation, different harness length, or another control configuration. Verify the original control and rigging before ordering.
OEM and Cross Reference Numbers
Mercury 881170A15 is associated with the following remote-control references for compatible applications.
| Part Number | Relationship |
|---|---|
| 881170A15 | Genuine Mercury OEM |
| 16900A15 | Mercury Cross Reference |
| 16900A20 | Mercury Cross Reference |
| 8M0178521 | Newer Mercury Replacement Reference |
| 8M0178524 | Mercury Cross Reference |
| 881170A1 | Earlier Mercury Reference |
| 881170A2 | Earlier Mercury Reference |
| 881170A20 | Mercury Cross Reference |
| 88170A15 | Cross Reference |
| 881170A15P | Pro Marine Aftermarket Alternative |
What This Control is Used For
This Mercury side-mount remote control provides helm operation of the mechanical throttle and shift system on compatible Mercury installations.
The control mounts on the side of the helm or console rather than on top of the console, and it connects to the engine rigging using the required Mercury 8-pin electrical harness and Gen 1-style control cables.
The compatible installation also provides power trim and tilt operation from the remote-control handle.
Mercury Rigging Fitment
This control is best identified by its rigging configuration rather than by engine horsepower or a broad model-year range.
| Fitment Requirement | Required Configuration |
|---|---|
| Rigging Brand | Compatible Mercury Mechanical-Control System |
| Mounting Style | Side Mount |
| Electrical Connection | Mercury 8-Pin |
| Control Cable Type | Gen 1-Style Mechanical Control Cables |
| Harness Length | 15 Feet |
| Trim Configuration | Power Trim and Tilt |
| Control Operation | Mechanical Throttle and Shift |
8-Pin vs. 14-Pin Mercury Side Mount Controls
Mercury used several electrical configurations in its mechanical remote controls. The 881170A15 is an 8-pin control.
Do not confuse it with 14-pin Mercury side-mount controls. Even when the outside appearance is similar, the electrical harness may be different. Always inspect the existing connector before ordering.
Gen 1 Control Cable Application
This remote control is intended for compatible Gen 1-style Mercury mechanical control cables.
Gen 1 and Gen 2 control cables use different control-end attachment configurations. A Gen 2 cable application should not be assumed to work with this control.
Pro Marine 881170A15P Side Mount Control
Looking for an aftermarket alternative? Pro Marine USA also stocks 881170A15P for the compatible 8-pin, Gen 1 cable, 15-foot harness application.
Common Replacement Reasons
- Original side-mount control is worn or physically damaged.
- Throttle or shift lever operation has become loose or unreliable.
- Power trim switch in the original control no longer functions correctly.
- Control housing, wiring, or internal mechanism has been damaged.
- An older matching Mercury control is being replaced during a rigging restoration.
- Existing control has been identified as one of the matching cross-reference numbers.
Hard shifting or throttle movement may also be caused by worn, corroded, binding, or incorrectly adjusted control cables. The complete control and cable system should be inspected during diagnosis.
Installation Tips
- Disconnect battery power before servicing the control or engine electrical system.
- Verify the original control uses the required Mercury 8-pin electrical connection.
- Confirm both throttle and shift cables use Gen 1-style connections.
- Inspect existing control cables for corrosion, stiffness, kinks, or excessive wear.
- Verify the 15-foot harness is appropriate for the existing routing.
- Route wiring and cables without excessive tension, sharp bends, or chafing.
- After installation, verify neutral, shift direction, throttle travel, trim operation, and overall control function.
Remote-control installation directly affects throttle and shift operation. Installation and adjustment should be performed by a qualified marine technician when the installer is not familiar with Mercury mechanical rigging.
Key Features and Benefits
- Genuine Mercury OEM: Factory Mercury remote-control assembly.
- 8-Pin Configuration: For compatible Mercury 8-pin electrical systems.
- Side Mount Design: Designed for compatible side-mounted helm installations.
- Gen 1 Cable Fitment: Uses compatible Gen 1-style mechanical control cables.
- 15-Foot Harness: Configured with the specified harness length.
- Power Trim and Tilt: Provides trim control on compatible Mercury applications.
- Aftermarket Alternative: Pro Marine 881170A15P is also available.
Frequently Asked Questions
What is Mercury 881170A15?
It is a genuine Mercury OEM side-mount remote control for compatible mechanical rigging systems using an 8-pin electrical connection, Gen 1-style control cables, and a 15-foot harness.
Does Mercury 881170A15 use an 8-pin connector?
Yes. This control is listed for the Mercury 8-pin electrical configuration.
What type of control cables does it use?
It is intended for compatible Gen 1-style mechanical throttle and shift cables.
How long is the harness?
The harness is 15 feet long.
Does this control include trim operation?
Yes. This configuration provides power trim and tilt control on the compatible Mercury installation.
What supersedes Mercury 881170A15?
Mercury parts information identifies 8M0178521 as a newer replacement reference for 881170A15.
Is Pro Marine 881170A15P an aftermarket alternative?
Yes. Pro Marine USA also stocks the Pro Marine 881170A15P side-mount control .
Is this the same as a 14-pin Mercury control?
No. This is the 8-pin version. A 14-pin control uses a different electrical configuration.
Can I use this with Gen 2 control cables?
Do not assume compatibility. This control is specifically identified for Gen 1-style cables.
Will this fit every Mercury outboard?
No. Fitment depends on the complete rigging setup, including connector style, cable generation, mounting configuration, and harness requirements.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
881170A15, 16900A15, 16900A20, 8M0178521, 8M0178524, 881170A1, 881170A2, 881170A20, 88170A15, 881170A15P
Searchable Terms
Mercury OEM side mount control, Mercury 8 pin side mount control, Mercury 8-pin remote control, Mercury Gen 1 control, Mercury Gen 1 cable control, Mercury 15 foot harness control, Mercury trim and tilt control, Mercury mechanical remote control, Mercury throttle and shift control, Mercury control box, Mercury side mount remote, 881170A15, 8M0178521 replacement, 16900A15 replacement
16900A20
8M0178521
8M0178524
881170A1
881170A15
881170A2
881170A20
88170A15
704-48205-B1-00
704-48205-P0-00
704-48205-P1-00
704-48205-R0-00
704-48205-R1-00
704-48205-R2-00
704-48205-10-00
704-48205-11-00
704-48205-12-00
704-48205-13-00
704-48205-14-00
8M0095659
8M0095659
8M0157616
8M0157620
702755015673
8M0067804
892790A01