Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
|◀ ◀ 565 - 576 of 998 ▶ ▶|
View:
Item#:
90386-22M67-00
Cross Reference#:
90386-22M67-00
Manufacturer Item:
90386-22M67
Manufacturer:
Yamaha Outboard
Available:
Special Order
Your Price:
6.20
Each
Yamaha 40-90hp F25-F60
Item#:
90386-22M15-00
Cross Reference#:
90386-22M15-00
Manufacturer Item:
90386-22M15-00
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
11.49
Each
Mercury 75-300HP 3 cyl V6 1.035" X 12 1/8" (STT-3)
Item#:
826125A1
Cross Reference#:
826125A1
826125A2
85366
99170A1
Manufacturer Item:
826125A1
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
287.49
Each
Pro Marine Hydraulic Steering Cylinder Reseal Kit for Mercury Verado System

Pro Marine Verado Steering Cylinder Seal Kit

Mercury Verado Hydraulic Steering Cylinder Reseal Kit - 2700P

The Pro Marine 2700P Steering Cylinder Seal Kit is an aftermarket replacement kit for select Mercury Verado hydraulic steering cylinder assemblies.

This kit includes replacement seals and O-rings commonly required to reseal compatible Mercury Verado steering cylinders during hydraulic steering system maintenance and repair.

Compatible Applications

Engine Range Engine Type System Application Notes
Mercury Verado 135-400 HP FourStroke Hydraulic Steering Select compatible Mercury Verado steering cylinder assemblies
Mercury L6 Verado Models Supercharged FourStroke Hydraulic Steering Select integrated hydraulic steering systems
Mercury V8 and V10 Verado Models FourStroke Hydraulic Steering Select compatible Verado steering cylinder assemblies
Important Fitment Note:

Pro Marine 2700P replaces Mercury OEM steering cylinder seal kits 896173A01 and 8M0045604 for compatible steering cylinder assemblies.

Mercury used different steering cylinder configurations depending on engine model, production year, and steering system. Always verify the engine serial number and steering cylinder assembly number before ordering.

OEM Part Numbers and Cross References

Brand / Type Part Number
Pro Marine Aftermarket 2700P
Replaces Mercury OEM 896173A01
Replaces Mercury OEM 8M0045604

Watch: Mercury Verado Steering Cylinder Repair and Reseal

See how a Mercury Verado steering cylinder is repaired.

Watch Pro Marine USA demonstrate steering cylinder disassembly, cleaning, inspection, seal replacement, and reassembly. The tutorial also shows an example of contaminated hydraulic steering fluid.

 Watch Repair Video

This video demonstrates the general repair process. Always verify steering cylinder compatibility and follow the applicable Mercury service procedures.

Related Steering Cylinder Components

Depending on the repair being performed, you may also need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine.

See the Pro Marine 880667 Verado Steering Cylinder Seal .

Genuine Mercury OEM Alternative Available

Prefer a genuine Mercury replacement kit? Mercury OEM part number 8M0045604 is the genuine Mercury steering cylinder seal kit for compatible applications. It supersedes older Mercury part number 896173A01.

View Genuine Mercury 8M0045604 Steering Cylinder Seal Kit

What This Steering Cylinder Seal Kit is Used For

The Pro Marine 2700P Steering Cylinder Seal Kit is designed for resealing compatible Mercury Verado hydraulic steering cylinder assemblies.

Hydraulic steering cylinders use internal seals and O-rings to help maintain hydraulic pressure and prevent fluid leakage.

Over time, these components may become worn or damaged, potentially allowing hydraulic fluid leakage or reduced steering performance.

Replacing worn seals during steering cylinder service can help restore proper sealing when the cylinder and other components remain in serviceable condition.

Common Symptoms and Replacement Reasons

  • Hydraulic fluid leaking from the steering cylinder
  • Visible deterioration or damage to steering cylinder seals
  • Loss of hydraulic steering fluid
  • Reduced steering performance associated with seal leakage
  • Steering cylinder disassembly for inspection or repair
  • Seal replacement during steering cylinder service

Important: Steering problems may also be caused by the power steering pump, hydraulic hoses, helm, fluid contamination, or other system components. Replacing steering cylinder seals will not correct every steering problem.

Key Features and Benefits

  • Pro Marine aftermarket steering cylinder reseal kit
  • Replaces Mercury OEM seal kits 896173A01 and 8M0045604
  • Designed for select Mercury Verado hydraulic steering cylinders
  • Includes replacement hydraulic seals and O-rings
  • Used during steering cylinder rebuilding and reseal service
  • Helps address hydraulic fluid leakage caused by worn seals
  • Aftermarket alternative to compatible Mercury OEM seal kits
  • Steering cylinder repair tutorial available through the video link above

Steering Cylinder Seal Kit Details

  • Brand: Pro Marine
  • Part Number: 2700P
  • Part Type: Hydraulic Steering Cylinder Seal Kit
  • Replaces Mercury OEM: 896173A01 and 8M0045604
  • Application: Select Mercury Verado Steering Cylinders
  • System: Hydraulic Power Steering
  • Use: Steering Cylinder Reseal and Repair
  • Quantity Sold: One Kit

Installation and Repair Tips

  • Verify steering cylinder assembly and replacement seal kit compatibility before beginning repairs.
  • Follow the applicable Mercury service manual for cylinder removal, disassembly, inspection, and reassembly.
  • Inspect internal cylinder surfaces and components for scoring, corrosion, and other damage.
  • Keep hydraulic steering components clean during service to reduce the risk of introducing contamination.
  • Use only the hydraulic steering fluid specified for the applicable Mercury steering system.
  • Follow the manufacturer's bleeding and testing procedures before returning the steering system to service.

Hydraulic steering is a safety-critical system. Repairs should be performed by qualified personnel using the appropriate service procedures and tools.

Frequently Asked Questions

What does Pro Marine 2700P fit?
The kit fits select Mercury Verado hydraulic steering cylinder assemblies that use compatible replacement seals. Verify fitment using the steering cylinder assembly number.

What Mercury OEM seal kits does 2700P replace?
Pro Marine 2700P replaces Mercury OEM seal kit numbers 896173A01 and 8M0045604 for compatible applications.

What is included in the kit?
The kit includes replacement seals and O-rings commonly required for compatible Verado steering cylinder reseal service.

Can worn steering cylinder seals cause hydraulic fluid leaks?
Yes. Damaged or worn seals may allow hydraulic fluid to escape from the steering cylinder assembly.

Will replacing the seals fix every Verado steering problem?
No. Steering issues may also involve the power steering pump, hydraulic hoses, helm, fluid contamination, or other components. Proper diagnosis is recommended before replacing parts.

Is there a video showing how to rebuild a Mercury Verado steering cylinder?
Yes. Pro Marine USA provides a repair tutorial demonstrating steering cylinder disassembly, cleaning, inspection, seal replacement, and reassembly. Click the video thumbnail above to watch the tutorial on YouTube.

Do I need the additional steering cylinder attachment seal?
Depending on the repair, the steering cylinder attachment seal may also need replacement. See Pro Marine part number 880667.

Is Pro Marine 2700P a genuine Mercury OEM kit?
No. This is a Pro Marine aftermarket replacement seal kit for compatible Mercury steering cylinder assemblies. Genuine Mercury OEM kit 8M0045604 is also available.

Should I verify fitment before ordering?
Yes. Mercury used different steering cylinder configurations across engine models and production ranges. Confirm the correct application before purchasing.

Dealer Discounts and Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? Pro Marine USA offers dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 in the continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help confirming fitment or ordering the correct steering cylinder repair components?

Contact Pro Marine USA
Phone: 941-721-3000


Searchable Part Numbers

2700P, 896173A01, 8M0045604

Searchable Terms

Pro Marine 2700P, Pro Marine Verado steering seal kit, Mercury Verado steering cylinder seal kit, Mercury steering cylinder reseal kit, Mercury hydraulic steering cylinder rebuild kit, Mercury Verado steering cylinder repair, Mercury Verado steering cylinder repair video, Mercury Verado steering cylinder rebuild tutorial, Verado hydraulic steering seal replacement, Verado steering ram seal kit, Mercury power steering cylinder repair, Mercury Verado hydraulic steering repair, Verado steering cylinder service kit, Mercury Verado gelled hydraulic fluid, Mercury Verado steering cylinder disassembly, Mercury Verado steering cylinder reassembly, Verado steering cylinder seal installation

Item#:
2700P
Cross Reference#:
18-2700
8M0045604
896173A01
Manufacturer Item:
8M0045604
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
136.94
Each
OEM adjustable helm for Verado power steering systems

Mercury Verado Power Steering Helm

Mercury Verado 50cm Tilt Power Steering Helm

This OEM Mercury 50cm power steering helm is the tilt version for Mercury Verado power steering systems. It is used when the boat requires an adjustable steering wheel position instead of a fixed non-tilt helm.

Match your original helm number, steering setup, and cross-reference numbers before ordering. For Verado pump service, Gen A/B replacement and Gen C pump options are linked below, along with Pro Marine's Gen B to Gen C conversion walkthrough.

Compatible Applications

System Helm Type Fitment Note
Mercury Verado power steering systems 50cm tilt helm Verify the current helm number, steering configuration, and OEM cross-reference before ordering.

Important Fitment Note

This is the tilt Mercury Verado helm. If the boat uses a fixed steering wheel position and does not need tilt adjustment, order the Mercury Verado 50cm non-tilt helm, item 8M0137449.

OEM & Cross Reference Numbers

Type Part Numbers
Pro Marine Item Number 8M0137451
Mercury Manufacturer Item 8M0137451
Cross Reference Numbers 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0137451, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53

What This Part is Used For

The helm is the steering control unit mounted behind the steering wheel at the dash. This Mercury 8M0137451 helm is used when replacing the adjustable tilt helm in a compatible Verado power steering system.

If the steering system has been converted, repaired, or mixed with later-generation pump components, verify the helm, hose, pump, and harness requirements before ordering.

Related Verado Power Steering Parts

Verado non tilt helm

Helm Power Steering Std 50Cm

Mercury Verado 50cm standard non-tilt power steering helm. Order this version when the application requires a fixed steering wheel position.

Item #: 8M0137449

View Non-Tilt Helm
Power steering fluid

Power Steering Fluid

Mercury full synthetic power steering fluid for compatible Mercury and Verado power steering service.

Item #: 858077

View Power Steering Fluid
Gen A B pump

Mercury Verado Gen A/B Power Steering Pump Replacement

Pro Marine replacement pump for Gen A and Gen B Verado power steering systems. Cross references 8M0134359 and 8M0134736.

Item #: 8M0134736P

View Gen A/B Pump
Gen C pump

Power Steering Pump

OEM Mercury Verado Gen C power steering pump. Pump only; hoses and conversion parts are sold separately when required.

Item #: 8M0199048

View Gen C Pump

Gen B to Gen C Conversion Help

If you are replacing a Verado power steering pump and need to identify whether your boat has a Gen A/B or Gen C system, review Pro Marine's conversion walkthrough before ordering pump, harness, hose, or steering components.

Read the Verado Gen B to Gen C Power Steering Conversion Guide

Key Features and Benefits

  • OEM Mercury Marine 50cm power steering helm.
  • Tilt design allows adjustable steering wheel positioning.
  • Fits Verado power steering systems when the original application calls for this tilt helm.
  • Cross references common Mercury tilt helm numbers including 892516A01, 892516A02, 892516K31, and 892516K32.
  • Related non-tilt helm, power steering fluid, Gen A/B pump, Gen C pump, and conversion guide are linked for easier steering system service planning.

Product Details

Product Helm Power Steering With Tilt
Application Mercury Verado power steering systems
Manufacturer Mercury Marine
OEM or Aftermarket OEM
Helm Style Tilt

FAQ

Is this the tilt helm?

Yes. This is the Mercury Verado 50cm tilt power steering helm. For the non-tilt version, order item 8M0137449.

What does this helm fit?

This helm fits Verado power steering systems that require the 50cm tilt helm. Verify your original helm part number and steering configuration before ordering.

Which pump should I order with Verado steering service?

Identify the pump generation first. Pro Marine offers a Gen A/B replacement pump, item 8M0134736P, and an OEM Mercury Gen C pump, item 8M0199048. Use the Gen B to Gen C conversion walkthrough if you are planning an upgrade.

Is power steering fluid linked for this system?

Yes. Mercury full synthetic power steering fluid is available separately as item 858077.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Terms

Mercury Verado tilt power steering helm, Mercury Verado 50cm helm, adjustable Verado helm, OEM Mercury tilt helm, Verado hydraulic power steering helm, Verado Gen B to Gen C conversion, Verado Gen C pump, Verado Gen A B pump.

Searchable Part Numbers

8M0137451, 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53, 8M0137449, 858077, 858077K01, 858002K01, 858077KC1, 8M0134736P, 8M0134736, 8M0134359, 8M0199048.

Item#:
8M0137451
Cross Reference#:
8M0030273
8M0134636
8M0134637
8M0134638
8M0137451
8M0151559
892516A01
892516A02
892516K01
892516K02
892516K03
892516K11
892516K12
892516K31
892516K32
892516K33
892516K51
892516K52
892516K53
Manufacturer Item:
8M0137451
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
954.64
Each
Baystar Steering Systems
Item#:
HP4600
Manufacturer Item:
HP4600
Available:
In Stock
Your Price:
215.49
Each
Reman Steering Cylinder $200 Core Charge Included in Price

Pro Marine Remanufactured Steering Cylinder Kit

Mercury Verado & Racing L6 V8 V10 200-450HP Reman Steering Cylinder

The Pro Marine 896500R01 Remanufactured Steering Cylinder Kit is a cost-saving replacement option for Mercury Verado L6, Verado V8, Verado V10, and Mercury Racing V8 450R applications. This remanufactured cylinder is built as an alternative to Mercury OEM 896500A01 and cross references Mercury 8M0118141 and 880659T.

This reman steering cylinder includes a 1-year warranty and the listed price includes a $200 refundable core charge. Return your rebuildable core after installation and the $200 core charge will be refunded.

$200 Core Charge Included in Price

This remanufactured steering cylinder price includes a $200 refundable core charge.

  • $200 core charge is already included in the listed price.
  • $200 will be refunded when your rebuildable core is returned.
  • The returned core must be complete and rebuildable.
  • You may avoid the core refund process by sending your core in before the reman unit ships.

If you want to send your core in first, contact Pro Marine before ordering so the core return and shipment timing can be handled correctly.

Compatible Applications

Engine Family Horsepower Range
Mercury Verado L6 200HP-350HP
Mercury Verado V8 200HP-300HP
Mercury Verado V10 350HP-425HP
Mercury Racing V8 450R
Important Fitment Note:

Mercury used multiple steering cylinder designs across different Verado and Racing applications. Always verify your engine serial number and original steering cylinder part number before ordering.

This remanufactured cylinder replaces the application family using Mercury 896500A01, 8M0118141, and 880659T. This listing should not be used for Mercury Racing 500R applications.

OEM & Cross Reference Numbers

Type Part Number
Pro Marine Reman 896500R01
Mercury OEM 896500A01
Mercury OEM 8M0118141
Mercury OEM 880659T

Watch: Mercury Verado Steering Cylinder Repair and Reseal

Should you reseal your existing steering cylinder or replace it?

Watch Pro Marine USA demonstrate Mercury Verado steering cylinder disassembly, cleaning, inspection, seal replacement, and reassembly. The video also shows an example of contaminated hydraulic fluid. If your cylinder is not suitable for resealing, this remanufactured 896500R01 cylinder may be an alternative after confirming fitment.

 Watch Repair Video

This video illustrates a repair process; it does not establish that every steering cylinder can be rebuilt. Verify part compatibility and follow applicable Mercury service procedures. Hydraulic steering is a safety-critical system.

OEM Alternative Available

Mercury OEM 896500A01 Steering Cylinder Kit

Prefer a brand-new factory Mercury part? We also stock the OEM Mercury steering cylinder kit for the same Verado and Mercury Racing 450R application family.

View OEM Mercury 896500A01 Steering Cylinder Kit

Want to Reseal Your Own Steering Cylinder?

If your steering cylinder is rebuildable and you prefer to reseal it yourself, Pro Marine also offers seal kits, an individual cylinder seal, and the required steering cylinder spanner tool. The spanner tool is a necessity if you plan to reseal your own cylinder.

Pro Marine Seal Kit

Pro Marine 2700P Verado Steering Cylinder Seal Kit

Pro Marine seal kit for resealing compatible Mercury Verado steering cylinders. Replaces Mercury 896173A01.

View Pro Marine 2700P Seal Kit

OEM Seal Kit

Mercury OEM 2700 Steering Cylinder Seal Kit

Genuine Mercury OEM Verado steering cylinder seal kit. Replaces Mercury 8M0045604.

View Mercury OEM 2700 Seal Kit

Cylinder Seal

Pro Marine 880667 Steering Cylinder Seal

Individual Pro Marine Verado steering cylinder seal. Replaces Mercury 8M0155530.

View Pro Marine 880667 Cylinder Seal

Spanner Tool

Mercury 8M0078614 Steering Cylinder Spanner Tool

Required tool for disassembling and resealing compatible Verado steering cylinders. This tool is a necessity if you want to reseal your own cylinder.

View Steering Cylinder Spanner Tool

What This Part is Used For

The steering cylinder is part of the hydraulic steering system that controls outboard movement at the transom. A worn or leaking cylinder can cause steering fluid loss, reduced steering response, excess play, or unsafe steering operation.

Choosing a remanufactured Pro Marine cylinder can be a cost-effective way to restore steering performance while reusing a rebuildable core from your existing steering system.

Why Choose the Remanufactured Cylinder?

  • Remanufactured Pro Marine steering cylinder kit
  • Built as an alternative to Mercury OEM 896500A01
  • Fits Mercury Verado L6, V8, V10, and Racing V8 450R applications
  • Does not fit Mercury Racing 500R applications
  • Includes a 1-year warranty
  • Price includes a refundable $200 core charge
  • $200 refunded when your rebuildable core is returned
  • Core charge process may be avoided by sending your core in before shipment
  • OEM replacement and reseal options linked above

Core Return Details

This remanufactured steering cylinder is sold with a core charge because your old cylinder can often be rebuilt and reused. The $200 core charge is already included in the displayed price.

  • Order the remanufactured cylinder and install it on your engine.
  • Return your old rebuildable steering cylinder core to Pro Marine.
  • Once the rebuildable core is received and accepted, your $200 core charge is refunded.
  • If you send your core in first, the core charge refund step may be avoided.

Core must be complete and rebuildable. Damaged, incomplete, or non-rebuildable cores may not qualify for the refund.

FAQ

Does the price include the $200 core charge?
Yes. The listed price includes a $200 refundable core charge.

How do I get the $200 core charge refunded?
Return your old rebuildable steering cylinder core after purchase. Once the core is received and accepted, $200 will be refunded.

Can I avoid the core charge?
You can avoid the core charge refund process by sending your rebuildable core in before the remanufactured cylinder ships. Contact Pro Marine before ordering if you want to use this option.

What engines does this reman steering cylinder fit?
This cylinder fits Mercury Verado L6, Verado V8, Verado V10, and Mercury Racing V8 450R applications when the OEM part number matches.

Does this fit Mercury Racing 500R?
No. This listing should not be used for Mercury Racing 500R applications.

Does the reman cylinder include a warranty?
Yes. The Pro Marine remanufactured steering cylinder includes a 1-year warranty.

Do you sell the OEM steering cylinder?
Yes. The Mercury OEM 896500A01 steering cylinder kit is linked above.

Can I reseal my own cylinder instead?
Yes. Seal kits, an individual cylinder seal, and the required spanner tool are linked above. The spanner tool is necessary if you plan to reseal your own cylinder.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return, core, or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

896500R01, 896500A01, 8M0118141, 880659T, Mercury Verado steering cylinder, Mercury Verado L6 steering cylinder, Mercury Verado V8 steering cylinder, Mercury Verado V10 steering cylinder, Mercury Racing 450R steering cylinder, Mercury 200 steering cylinder, Mercury 225 steering cylinder, Mercury 250 steering cylinder, Mercury 300 steering cylinder, Mercury 350 steering cylinder, Mercury 400 steering cylinder, Mercury 425 steering cylinder, Mercury 450R steering cylinder, reman Verado steering cylinder, remanufactured steering cylinder, Verado steering cylinder core charge, $200 core charge, 1 year warranty reman steering cylinder, 2700P, 2700, 896173A01, 8M0045604, 880667, 8M0155530, 8M0078614, steering cylinder spanner tool

Item#:
896500R01
Cross Reference#:
8M0118141
880659T
896500A01
Manufacturer Item:
896500A01
Manufacturer:
Aftermarket & OEM
Available:
In Stock
Your Price:
999.00
Each
Mercury Verado Hydraulic Helm Fits Verado Helm
Item#:
X66
Cross Reference#:
8M0001585
892554A01
892554T
Manufacturer Item:
8M6003710
Manufacturer:
Uflex
Available:
In Stock
Your Price:
225.40
Each
Heavy Gauge Battery Cable Splice Connector for Boats and Marine Rigging

Marine Battery Cable and Electrical Rigging

2 Gauge Battery Cable Butt Connector - 2 AWG Marine Cable Splice

The 2BC Battery Cable Butt Connector is designed for joining two sections of 2 gauge (2 AWG) battery cable. This heavy-gauge electrical connector is used for battery cable repairs, cable extensions and custom marine electrical installations.

Whether repairing an existing battery cable or building a custom cable assembly, a properly installed butt connector provides a mechanical and electrical connection between two cable ends.

The 2BC connector can be used with compatible 2 AWG red or black battery cable. For marine applications, the completed connection should be protected with appropriately sized marine-grade heat-shrink tubing to help prevent moisture intrusion and corrosion.

Pro Marine USA also carries matching 2 gauge battery cable and 1/2-inch heat shrink in red, black and combination packs, making it easy to purchase the materials needed for your battery cable installation.

Product Information

  • Item Number: 2BC
  • Product: Battery Cable Butt Connector
  • Cable Size: 2 Gauge / 2 AWG
  • Connector Type: Butt Splice Connector
  • Application: Battery Cable Splicing and Repair
  • Compatible Cable: 2 AWG Battery Cable
  • Connection Type: Crimped Cable Splice
  • Installation: Requires an appropriate heavy-duty cable crimping tool
  • Recommended Protection: Compatible Marine-Grade Heat Shrink
  • Typical Uses: Marine Battery Cables, Electrical Rigging and Cable Repairs

What This Part Is Used For

The 2BC butt connector is used to join two sections of 2 AWG battery cable when repairing, extending or assembling heavy-gauge electrical wiring.

Marine battery cables carry significant electrical current. Connections must be properly sized, securely crimped and protected against moisture and corrosion.

Common Applications

  • Marine battery cable repairs
  • Joining two sections of 2 AWG battery cable
  • Custom battery cable fabrication
  • Boat electrical system rigging
  • Battery cable extensions where permitted by the installation requirements
  • Battery switch and distribution wiring repairs
  • Marine engine battery cable service
  • Other compatible heavy-gauge DC electrical installations

This connector is not engine-specific. Compatibility is determined primarily by the cable gauge, conductor construction and electrical installation requirements.

Compatible Battery Cable

The 2BC connector is intended for use with compatible 2 gauge battery cable. Pro Marine USA offers the following matching cable options.

Item Description Cable Size Color Product
2B Battery Cable - Black 2 AWG Black View Cable
2R Battery Cable - Red 2 AWG Red View Cable

Build or Repair Your 2 Gauge Battery Cable

Complete your battery cable installation with compatible 2 AWG cable and heat-shrink tubing available from Pro Marine USA.

Matching 2 AWG Battery Cable

2B - 2 Gauge Black Battery Cable

Black 2 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for negative battery cable connections.

Shop 2 Gauge Black Cable

Matching 2 AWG Battery Cable

2R - 2 Gauge Red Battery Cable

Red 2 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for positive battery cable connections.

Shop 2 Gauge Red Cable

Recommended Heat Shrink for Battery Cable Connections

After crimping a battery cable butt connector, protect the completed splice with properly sized marine-grade heat-shrink tubing.

Heat shrink helps provide electrical insulation, strain relief and protection from moisture when the tubing is appropriate for the application and correctly installed.

Item Description Color Product Link
12RB 1/2-Inch Heat Shrink - Red and Black Combination Red and Black View Heat Shrink
12R 1/2-Inch Red Heat Shrink - 1 Foot Red View Heat Shrink
12B 1/2-Inch Black Heat Shrink - 1 Foot Black View Heat Shrink

Important: Verify that the heat-shrink tubing has the appropriate expanded diameter, recovered diameter and environmental rating for the completed splice. A nominal 1/2-inch size alone does not establish fit.

How to Install a 2 Gauge Battery Cable Butt Connector

Proper installation is essential for a reliable heavy-gauge battery cable connection.

  1. Disconnect the battery. Isolate the electrical system before working on battery cables. Disconnect the negative connection first when appropriate for the installation.
  2. Measure and cut the cable. Determine the required cable length and cut the 2 AWG battery cable cleanly.
  3. Prepare the heat shrink. Slide an appropriately sized piece of heat-shrink tubing onto the cable before making the splice.
  4. Strip the cable insulation. Remove only enough insulation for the connector's required insertion depth. Avoid damaging the conductor strands.
  5. Insert the cable. Insert the stripped cable end fully into one side of the butt connector. Repeat with the second cable.
  6. Crimp the connector. Use a properly sized heavy-duty crimping tool and the crimping method specified for the connector and cable.
  7. Inspect the connection. Check that both cable ends are securely retained and the crimp is properly formed.
  8. Apply heat shrink. Center the tubing over the splice and shrink it according to the tubing manufacturer's instructions.
  9. Secure the cable. Support the completed assembly and protect it from abrasion, sharp edges and excessive movement.

Important Battery Cable Installation Information

Battery cables can carry very high current. Improperly installed connections can overheat, create excessive electrical resistance or cause electrical system failure.

  • Use only connectors approved for the cable size and conductor type.
  • Use the correct crimping tool and manufacturer-recommended crimp method.
  • Do not use ordinary pliers to crimp heavy-gauge battery cable connectors.
  • Do not rely on solder alone to secure a battery cable connection.
  • Protect the completed connection from moisture, abrasion and vibration.
  • Follow applicable marine electrical standards and equipment manufacturer requirements.
  • Use a continuous cable run where required by the engine or electrical system manufacturer.
  • Do not splice engine starting cables where the manufacturer prohibits splices.

For critical starting and high-current circuits, have the installation inspected by a qualified marine electrical technician when necessary.

Key Features and Benefits

  • 2 AWG Cable Compatibility: Designed for compatible 2 gauge battery cable connections.
  • Battery Cable Repair: Useful for joining or repairing heavy-gauge electrical cable.
  • Marine Electrical Applications: Suitable for appropriately specified boat battery and rigging installations.
  • Red or Black Cable: Can be used with compatible 2 AWG cable regardless of insulation color.
  • Crimp Connection: Designed to be installed using an appropriate heavy-duty cable crimping tool.
  • Heat-Shrink Protection: Can be protected with correctly sized external heat-shrink tubing.
  • Matching Products Available: Pro Marine USA carries 2 AWG cable and red, black and combination heat-shrink options.

Frequently Asked Questions

What size cable does the 2BC butt connector fit?

The 2BC butt connector is intended for compatible 2 gauge (2 AWG) battery cable. Confirm the connector and conductor dimensions before installation.

Can I use this connector on marine battery cables?

It can be used for appropriate marine battery cable splicing applications when the connector, cable, crimping method and environmental protection meet the installation requirements.

Can I use the same connector with red and black battery cable?

Yes. The connector is sized by cable gauge, not insulation color. It can be used with compatible 2 AWG red or black cable.

What black battery cable works with this connector?

Pro Marine USA offers 2B - 2 Gauge Black Battery Cable.

What red battery cable works with this connector?

Pro Marine USA offers 2R - 2 Gauge Red Battery Cable.

Do I need heat shrink when installing a battery cable butt connector?

For marine applications, properly selected heat-shrink tubing is recommended to insulate and protect the completed connection against moisture and corrosion.

What heat shrink can I purchase for this connector?

Pro Marine USA offers 1/2-inch heat shrink in red, black and combination packs. Confirm that the tubing will fit over the completed splice and recover tightly around the cable insulation.

Does this connector already have heat shrink attached?

This listing identifies a battery cable butt connector. Integrated heat shrink has not been confirmed. The heat-shrink products linked above are available separately.

Can I use regular pliers to crimp this connector?

No. Heavy-gauge battery cable connectors require an appropriate crimping tool and correctly matched dies or crimping method.

Can I extend an outboard engine battery cable with this connector?

Only where the engine manufacturer and applicable electrical installation requirements permit a spliced battery cable. Some engine starting circuits require continuous cable runs.

Is 2 AWG the same as 2/0 AWG?

No. 2 AWG and 2/0 AWG are different cable sizes. This connector is identified for 2 AWG cable, not 2/0 AWG cable.

Can this connector be used with 4 gauge or 6 gauge cable?

No. Use a connector specifically sized for the cable gauge being installed.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies OEM and aftermarket marine parts, electrical components, battery cables and rigging supplies to marine repair shops, dealerships, professional technicians and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on qualifying orders over $100 within the continental United States. Oil and oversized items are excluded.
  • In-stock orders placed before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping options include UPS, USPS and FedEx.
  • Typical delivery is 1-5 business days, depending on destination and shipping service.

30-Day Return Policy

  • Eligible returns are accepted within 30 days.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • OEM electrical components are not returnable.
  • Return authorization is required before returning merchandise.

Need Help Selecting Battery Cable Components?

Contact Pro Marine USA for assistance identifying battery cable, electrical connectors, heat shrink and other marine rigging supplies.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

2BC, 2B, 2R, 12RB, 12R, 12B

Searchable Terms

2 gauge battery cable butt connector, 2 AWG battery cable splice, marine battery cable connector, boat battery cable butt splice, heavy gauge wire connector, 2 gauge wire splice connector, marine battery cable repair, battery cable extension connector, boat electrical rigging, marine electrical cable splice, 2 AWG red battery cable, 2 AWG black battery cable, marine battery cable heat shrink, 1/2 inch red heat shrink, 1/2 inch black heat shrink, marine battery cable fabrication, battery cable crimp connector, boat battery wiring connector, marine DC electrical connector

Item#:
2BC
Manufacturer:
Pro Marine
Available:
In Stock
20.3100
Your Price:
18.00
10 PACK
Heavy Gauge Battery Cable Splice Connector for Boats and Marine Rigging

Marine Battery Cable and Electrical Rigging

4 Gauge Battery Cable Butt Connector - 4 AWG Marine Cable Splice

The 4BC Battery Cable Butt Connector is designed for joining two sections of 4 gauge (4 AWG) battery cable. This heavy-gauge electrical connector is used for battery cable repairs, cable extensions and custom marine electrical installations.

Whether repairing an existing battery cable or building a custom cable assembly, a properly installed butt connector provides a mechanical and electrical connection between two cable ends.

The 4BC connector can be used with compatible 4 AWG red or black battery cable. For marine applications, the completed connection should be protected with appropriately sized marine-grade heat-shrink tubing to help prevent moisture intrusion and corrosion.

Pro Marine USA also carries matching 4 gauge battery cable and 1/2-inch heat shrink in red, black and combination packs, making it easy to purchase the materials needed for your battery cable installation.

Product Information

  • Item Number: 4BC
  • Product: Battery Cable Butt Connector
  • Cable Size: 4 Gauge / 4 AWG
  • Connector Type: Butt Splice Connector
  • Application: Battery Cable Splicing and Repair
  • Compatible Cable: 4 AWG Battery Cable
  • Connection Type: Crimped Cable Splice
  • Installation: Requires an appropriate heavy-duty cable crimping tool
  • Recommended Protection: Compatible Marine-Grade Heat Shrink
  • Typical Uses: Marine Battery Cables, Electrical Rigging and Cable Repairs

OEM and Cross Reference Numbers

The 4BC is a general-purpose battery cable connector rather than an engine-specific OEM replacement part. No additional manufacturer cross-reference numbers have been provided for this connector.

Item Number Description Application
4BC 4 Gauge Battery Cable Butt Connector 4 AWG Cable Splicing

What This Part Is Used For

The 4BC butt connector is used to join two sections of 4 AWG battery cable when repairing, extending or assembling heavy-gauge electrical wiring.

Marine battery cables can carry significant electrical current. Connections must be properly sized, securely crimped and protected against moisture and corrosion.

Common Applications

  • Marine battery cable repairs
  • Joining two sections of 4 AWG battery cable
  • Custom battery cable fabrication
  • Boat electrical system rigging
  • Battery cable extensions where permitted by the installation requirements
  • Battery switch and distribution wiring repairs
  • Marine engine battery cable service
  • Other compatible heavy-gauge DC electrical installations

This connector is not engine-specific. Compatibility is determined primarily by the cable gauge, conductor construction and electrical installation requirements.

Compatible Battery Cable Applications

The 4BC connector is intended for use with compatible 4 gauge battery cable. Pro Marine USA offers the following matching cable options.

Item Description Cable Size Color Product
4B Battery Cable - Black 4 AWG Black View Cable
4R Battery Cable - Red 4 AWG Red View Cable

Build or Repair Your 4 Gauge Battery Cable

Complete your battery cable installation with compatible 4 AWG cable and heat-shrink tubing available from Pro Marine USA.

Matching 4 AWG Battery Cable

4B - 4 Gauge Black Battery Cable

Black 4 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for negative battery cable connections.

Shop 4 Gauge Black Cable

Matching 4 AWG Battery Cable

4R - 4 Gauge Red Battery Cable

Red 4 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for positive battery cable connections.

Shop 4 Gauge Red Cable

Recommended Heat Shrink for Battery Cable Connections

After crimping a battery cable butt connector, protect the completed splice with properly sized marine-grade heat-shrink tubing.

Heat shrink helps provide electrical insulation, strain relief and protection from moisture when the tubing is appropriate for the application and correctly installed.

Item Description Color Product Link
12RB 1/2-Inch Heat Shrink - Red and Black Combination Red and Black View Heat Shrink
12R 1/2-Inch Red Heat Shrink - 1 Foot Red View Heat Shrink
12B 1/2-Inch Black Heat Shrink - 1 Foot Black View Heat Shrink

Important: Verify that the heat-shrink tubing has the appropriate expanded diameter, recovered diameter and environmental rating for the completed splice. A nominal 1/2-inch size alone does not establish fit.

How to Install a 4 Gauge Battery Cable Butt Connector

Proper installation is essential for a reliable heavy-gauge battery cable connection.

  1. Disconnect the battery. Isolate the electrical system before working on battery cables. Disconnect the negative connection first when appropriate for the installation.
  2. Measure and cut the cable. Determine the required cable length and cut the 4 AWG battery cable cleanly.
  3. Prepare the heat shrink. Slide an appropriately sized piece of heat-shrink tubing onto the cable before making the splice.
  4. Strip the cable insulation. Remove only enough insulation for the connector's required insertion depth. Avoid damaging the conductor strands.
  5. Insert the cable. Insert the stripped cable end fully into one side of the butt connector. Repeat with the second cable.
  6. Crimp the connector. Use a properly sized heavy-duty crimping tool and the crimping method specified for the connector and cable.
  7. Inspect the connection. Check that both cable ends are securely retained and the crimp is properly formed.
  8. Apply heat shrink. Center the tubing over the splice and shrink it according to the tubing manufacturer's instructions.
  9. Secure the cable. Support the completed assembly and protect it from abrasion, sharp edges and excessive movement.

Important Battery Cable Installation Information

Battery cables can carry very high current. Improperly installed connections can overheat, create excessive electrical resistance or cause electrical system failure.

  • Use only connectors approved for the cable size and conductor type.
  • Use the correct crimping tool and manufacturer-recommended crimp method.
  • Do not use ordinary pliers to crimp heavy-gauge battery cable connectors.
  • Do not rely on solder alone to secure a battery cable connection.
  • Protect the completed connection from moisture, abrasion and vibration.
  • Follow applicable marine electrical standards and equipment manufacturer requirements.
  • Use a continuous cable run where required by the engine or electrical system manufacturer.
  • Do not splice engine starting cables where the manufacturer prohibits splices.

For critical starting and high-current circuits, have the installation inspected by a qualified marine electrical technician when necessary.

Key Features and Benefits

  • 4 AWG Cable Compatibility: Designed for compatible 4 gauge battery cable connections.
  • Battery Cable Repair: Useful for joining or repairing heavy-gauge electrical cable.
  • Marine Electrical Applications: Suitable for appropriately specified boat battery and rigging installations.
  • Red or Black Cable: Can be used with compatible 4 AWG cable regardless of insulation color.
  • Crimp Connection: Designed to be installed using an appropriate heavy-duty cable crimping tool.
  • Heat-Shrink Protection: Can be protected with correctly sized external heat-shrink tubing.
  • Matching Products Available: Pro Marine USA carries 4 AWG cable and red, black and combination heat-shrink options.

Frequently Asked Questions

What size cable does the 4BC butt connector fit?

The 4BC butt connector is intended for compatible 4 gauge (4 AWG) battery cable. Confirm the connector and conductor dimensions before installation.

Can I use this connector on marine battery cables?

It can be used for appropriate marine battery cable splicing applications when the connector, cable, crimping method and environmental protection meet the installation requirements.

Can I use the same connector with red and black battery cable?

Yes. The connector is sized by cable gauge, not insulation color. It can be used with compatible 4 AWG red or black cable.

What black battery cable works with this connector?

Pro Marine USA offers 4B - 4 Gauge Black Battery Cable.

What red battery cable works with this connector?

Pro Marine USA offers 4R - 4 Gauge Red Battery Cable.

Do I need heat shrink when installing a battery cable butt connector?

For marine applications, properly selected heat-shrink tubing is recommended to insulate and protect the completed connection against moisture and corrosion.

What heat shrink can I purchase for this connector?

Pro Marine USA offers 1/2-inch heat shrink in red, black and combination packs. Confirm that the tubing will fit over the completed splice and recover tightly around the cable insulation.

Does this connector already have heat shrink attached?

This listing identifies a battery cable butt connector. Integrated heat shrink has not been confirmed. The heat-shrink products linked above are available separately.

Can I use regular pliers to crimp this connector?

No. Heavy-gauge battery cable connectors require an appropriate crimping tool and correctly matched dies or crimping method.

Can I extend an outboard engine battery cable with this connector?

Only where the engine manufacturer and applicable electrical installation requirements permit a spliced battery cable. Some engine starting circuits require continuous cable runs.

Is 4 AWG the same as 4/0 AWG?

No. 4 AWG and 4/0 AWG are different cable sizes. This connector is identified for 4 AWG cable, not 4/0 AWG cable.

Can this connector be used with 2 gauge or 6 gauge cable?

No. Use a connector specifically sized for the cable gauge being installed.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies OEM and aftermarket marine parts, electrical components, battery cables and rigging supplies to marine repair shops, dealerships, professional technicians and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on qualifying orders over $100 within the continental United States. Oil and oversized items are excluded.
  • In-stock orders placed before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping options include UPS, USPS and FedEx.
  • Typical delivery is 1-5 business days, depending on destination and shipping service.

30-Day Return Policy

  • Eligible returns are accepted within 30 days.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • OEM electrical components are not returnable.
  • Return authorization is required before returning merchandise.

Need Help Selecting Battery Cable Components?

Contact Pro Marine USA for assistance identifying battery cable, electrical connectors, heat shrink and other marine rigging supplies.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

4BC, 4B, 4R, 12RB, 12R, 12B

Searchable Terms

4 gauge battery cable butt connector, 4 AWG battery cable splice, marine battery cable connector, boat battery cable butt splice, heavy gauge wire connector, 4 gauge wire splice connector, marine battery cable repair, battery cable extension connector, boat electrical rigging, marine electrical cable splice, 4 AWG red battery cable, 4 AWG black battery cable, marine battery cable heat shrink, 1/2 inch red heat shrink, 1/2 inch black heat shrink, marine battery cable fabrication, battery cable crimp connector, boat battery wiring connector, marine DC electrical connector

Item#:
4BC
Manufacturer:
Pro Marine
Available:
In Stock
23.7900
Your Price:
21.00
10 PACK
Heavy Gauge Battery Cable Splice Connector for Boats and Marine Rigging

Marine Battery Cable and Electrical Rigging

6 Gauge Battery Cable Butt Connector - 6 AWG Marine Cable Splice

The 6BC Battery Cable Butt Connector is designed for joining two sections of 6 gauge (6 AWG) battery cable. This heavy-gauge electrical connector is used for battery cable repairs, cable extensions and custom marine electrical installations.

Whether repairing an existing battery cable or building a custom cable assembly, a properly installed butt connector provides a mechanical and electrical connection between two cable ends.

The 6BC connector can be used with compatible 6 AWG red or black battery cable. For marine applications, the completed connection should be protected with appropriately sized marine-grade heat-shrink tubing to help prevent moisture intrusion and corrosion.

Pro Marine USA also carries matching 6 gauge battery cable and 1/2-inch heat shrink in red, black and combination packs, making it easy to purchase the materials needed for your battery cable installation.

Product Information

  • Item Number: 6BC
  • Product: Battery Cable Butt Connector
  • Cable Size: 6 Gauge / 6 AWG
  • Connector Type: Butt Splice Connector
  • Application: Battery Cable Splicing and Repair
  • Compatible Cable: 6 AWG Battery Cable
  • Connection Type: Crimped Cable Splice
  • Installation: Requires an appropriate heavy-duty cable crimping tool
  • Recommended Protection: Compatible Marine-Grade Heat Shrink
  • Typical Uses: Marine Battery Cables, Electrical Rigging and Cable Repairs

OEM and Cross Reference Numbers

The 6BC is a general-purpose battery cable connector rather than an engine-specific OEM replacement part. No additional manufacturer cross-reference numbers have been provided for this connector.

Item Number Description Application
6BC 6 Gauge Battery Cable Butt Connector 6 AWG Cable Splicing

What This Part Is Used For

The 6BC butt connector is used to join two sections of 6 AWG battery cable when repairing, extending or assembling heavy-gauge electrical wiring.

Marine battery cables can carry significant electrical current. Connections must be properly sized, securely crimped and protected against moisture and corrosion.

Common Applications

  • Marine battery cable repairs
  • Joining two sections of 6 AWG battery cable
  • Custom battery cable fabrication
  • Boat electrical system rigging
  • Battery cable extensions where permitted by the installation requirements
  • Battery switch and distribution wiring repairs
  • Marine engine battery cable service
  • Other compatible heavy-gauge DC electrical installations

This connector is not engine-specific. Compatibility is determined primarily by the cable gauge, conductor construction and electrical installation requirements.

Compatible Battery Cable Applications

The 6BC connector is intended for use with compatible 6 gauge battery cable. Pro Marine USA offers the following matching cable options.

Item Description Cable Size Color Product
6B Battery Cable - Black 6 AWG Black View Cable
6R Battery Cable - Red 6 AWG Red View Cable

Build or Repair Your 6 Gauge Battery Cable

Complete your battery cable installation with compatible 6 AWG cable and heat-shrink tubing available from Pro Marine USA.

Matching 6 AWG Battery Cable

6B - 6 Gauge Black Battery Cable

Black 6 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for negative battery cable connections.

Shop 6 Gauge Black Cable

Matching 6 AWG Battery Cable

6R - 6 Gauge Red Battery Cable

Red 6 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for positive battery cable connections.

Shop 6 Gauge Red Cable

Recommended Heat Shrink for Battery Cable Connections

After crimping a battery cable butt connector, protect the completed splice with properly sized marine-grade heat-shrink tubing.

Heat shrink helps provide electrical insulation, strain relief and protection from moisture when the tubing is appropriate for the application and correctly installed.

Item Description Color Product Link
12RB 1/2-Inch Heat Shrink - Red and Black Combination Red and Black View Heat Shrink
12R 1/2-Inch Red Heat Shrink - 1 Foot Red View Heat Shrink
12B 1/2-Inch Black Heat Shrink - 1 Foot Black View Heat Shrink

Important: Verify that the heat-shrink tubing has the appropriate expanded diameter, recovered diameter and environmental rating for the completed splice. A nominal 1/2-inch size alone does not establish fit.

How to Install a 6 Gauge Battery Cable Butt Connector

Proper installation is essential for a reliable heavy-gauge battery cable connection.

  1. Disconnect the battery. Isolate the electrical system before working on battery cables. Disconnect the negative connection first when appropriate for the installation.
  2. Measure and cut the cable. Determine the required cable length and cut the 6 AWG battery cable cleanly.
  3. Prepare the heat shrink. Slide an appropriately sized piece of heat-shrink tubing onto the cable before making the splice.
  4. Strip the cable insulation. Remove only enough insulation for the connector's required insertion depth. Avoid damaging the conductor strands.
  5. Insert the cable. Insert the stripped cable end fully into one side of the butt connector. Repeat with the second cable.
  6. Crimp the connector. Use a properly sized heavy-duty crimping tool and the crimping method specified for the connector and cable.
  7. Inspect the connection. Check that both cable ends are securely retained and the crimp is properly formed.
  8. Apply heat shrink. Center the tubing over the splice and shrink it according to the tubing manufacturer's instructions.
  9. Secure the cable. Support the completed assembly and protect it from abrasion, sharp edges and excessive movement.

Important Battery Cable Installation Information

Battery cables can carry very high current. Improperly installed connections can overheat, create excessive electrical resistance or cause electrical system failure.

  • Use only connectors approved for the cable size and conductor type.
  • Use the correct crimping tool and manufacturer-recommended crimp method.
  • Do not use ordinary pliers to crimp heavy-gauge battery cable connectors.
  • Do not rely on solder alone to secure a battery cable connection.
  • Protect the completed connection from moisture, abrasion and vibration.
  • Follow applicable marine electrical standards and equipment manufacturer requirements.
  • Use a continuous cable run where required by the engine or electrical system manufacturer.
  • Do not splice engine starting cables where the manufacturer prohibits splices.

For critical starting and high-current circuits, have the installation inspected by a qualified marine electrical technician when necessary.

Key Features and Benefits

  • 6 AWG Cable Compatibility: Designed for compatible 6 gauge battery cable connections.
  • Battery Cable Repair: Useful for joining or repairing heavy-gauge electrical cable.
  • Marine Electrical Applications: Suitable for appropriately specified boat battery and rigging installations.
  • Red or Black Cable: Can be used with compatible 6 AWG cable regardless of insulation color.
  • Crimp Connection: Designed to be installed using an appropriate heavy-duty cable crimping tool.
  • Heat-Shrink Protection: Can be protected with correctly sized external heat-shrink tubing.
  • Matching Products Available: Pro Marine USA carries 6 AWG cable and red, black and combination heat-shrink options.

Frequently Asked Questions

What size cable does the 6BC butt connector fit?

The 6BC butt connector is intended for compatible 6 gauge (6 AWG) battery cable. Confirm the connector and conductor dimensions before installation.

Can I use this connector on marine battery cables?

It can be used for appropriate marine battery cable splicing applications when the connector, cable, crimping method and environmental protection meet the installation requirements.

Can I use the same connector with red and black battery cable?

Yes. The connector is sized by cable gauge, not insulation color. It can be used with compatible 6 AWG red or black cable.

What black battery cable works with this connector?

Pro Marine USA offers 6B - 6 Gauge Black Battery Cable.

What red battery cable works with this connector?

Pro Marine USA offers 6R - 6 Gauge Red Battery Cable.

Do I need heat shrink when installing a battery cable butt connector?

For marine applications, properly selected heat-shrink tubing is recommended to insulate and protect the completed connection against moisture and corrosion.

What heat shrink can I purchase for this connector?

Pro Marine USA offers 1/2-inch heat shrink in red, black and combination packs. Confirm that the tubing will fit over the completed splice and recover tightly around the cable insulation.

Does this connector already have heat shrink attached?

This listing identifies a battery cable butt connector. Integrated heat shrink has not been confirmed. The heat-shrink products linked above are available separately.

Can I use regular pliers to crimp this connector?

No. Heavy-gauge battery cable connectors require an appropriate crimping tool and correctly matched dies or crimping method.

Can I extend an outboard engine battery cable with this connector?

Only where the engine manufacturer and applicable electrical installation requirements permit a spliced battery cable. Some engine starting circuits require continuous cable runs.

Is 6 AWG the same as 6/0 AWG?

No. 6 AWG and 6/0 AWG are different cable sizes. This connector is identified for 6 AWG cable, not larger cable sizes.

Can this connector be used with 4 gauge or 8 gauge cable?

No. Use a connector specifically sized for the cable gauge being installed.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies OEM and aftermarket marine parts, electrical components, battery cables and rigging supplies to marine repair shops, dealerships, professional technicians and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on qualifying orders over $100 within the continental United States. Oil and oversized items are excluded.
  • In-stock orders placed before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping options include UPS, USPS and FedEx.
  • Typical delivery is 1-5 business days, depending on destination and shipping service.

30-Day Return Policy

  • Eligible returns are accepted within 30 days.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • OEM electrical components are not returnable.
  • Return authorization is required before returning merchandise.

Need Help Selecting Battery Cable Components?

Contact Pro Marine USA for assistance identifying battery cable, electrical connectors, heat shrink and other marine rigging supplies.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

6BC, 6B, 6R, 12RB, 12R, 12B

Searchable Terms

6 gauge battery cable butt connector, 6 AWG battery cable splice, marine battery cable connector, boat battery cable butt splice, heavy gauge wire connector, 6 gauge wire splice connector, marine battery cable repair, battery cable extension connector, boat electrical rigging, marine electrical cable splice, 6 AWG red battery cable, 6 AWG black battery cable, marine battery cable heat shrink, 1/2 inch red heat shrink, 1/2 inch black heat shrink, marine battery cable fabrication, battery cable crimp connector, boat battery wiring connector, marine DC electrical connector

Item#:
6BC
Manufacturer:
Pro Marine
Available:
In Stock
11.8800
Your Price:
10.75
10 PACK
Uflex Silver Steer 1500 psi w/Tilt Mechanism
Item#:
UP39T-SVS-X70
Manufacturer Item:
UP39T-SVS-X70
Manufacturer:
Uflex
Available:
Special Order
Your Price:
732.93
Each
|◀ ◀ 565 - 576 of 998 ▶ ▶|
View: