S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Pro Marine Mercury Verado Power Steering
Pro Marine Mercury Verado Gen A / Gen B Reman Power Steering Pump 8M0134736P
The Pro Marine 8M0134736P Remanufactured Power Steering Pump is an aftermarket replacement for Mercury Verado Gen A and Gen B power steering systems. It cross references Mercury part numbers 8M0134359 and 8M0134736.
This replacement allows customers to service an existing Gen A or Gen B steering system without purchasing all the additional components required for a complete Gen C conversion.
Important: Installation requires reusing the original case from your existing power steering pump.
Warranty: 1 year. Warranty coverage is void if gelled power steering fluid is found inside the pump. See the important steering system inspection and warranty information below before installing your replacement.
IMPORTANT INFORMATION BEFORE REPLACING YOUR VERADO POWER STEERING PUMP
Why Mercury Verado Power Steering Pumps Fail
One of the primary causes of premature Verado power steering pump failure is overheating caused by restricted hydraulic fluid flow.
A problem we frequently encounter is Mercury power steering fluid becoming thick, gel-like, or contaminated. This material can accumulate inside the hydraulic steering system, particularly in the steering cylinder, restricting the movement of hydraulic fluid.
As the steering cylinder becomes restricted, the power steering pump must work harder to move hydraulic fluid through the system. This increased workload can cause the pump to overheat, operate under excessive strain, and eventually fail.
Replacing the Pump Alone May Not Fix the Problem
If the original pump failed because of restricted hydraulic flow or gelled steering fluid, installing another pump without addressing the underlying problem can cause the replacement pump to overheat and fail as well.
Before installing a replacement pump, inspect the steering cylinder, hoses, fluid reservoir, and hydraulic system for gelled fluid, contamination, or restrictions. Correct any problems before operating the replacement pump.
Watch Our Verado Power Steering Repair Video
Watch our video for information about Verado steering system problems and servicing the steering cylinder. Understanding the condition of the hydraulic system before replacing the pump can help prevent another failure.
IMPORTANT WARRANTY WARNING
WARRANTY WILL BE VOID IF GELLED POWER STEERING FLUID IS FOUND INSIDE THE PUMP.
The replacement pump must be installed into a properly functioning hydraulic steering system. Gelled fluid, contamination, or restrictions in the steering cylinder or hydraulic lines must be addressed before installing the replacement pump. Failure to correct these conditions can result in overheating and premature pump failure.
VERADO STEERING CYLINDER SERVICE AND REPAIR
Parts and Tools for Servicing Your Verado Steering Cylinder
If gelled power steering fluid or restricted hydraulic flow contributed to the failure of your original pump, the steering cylinder should be inspected and serviced as necessary before installing a replacement.
Pro Marine offers steering cylinder seal kits, replacement seals, service tools, and remanufactured steering cylinders to help repair the underlying steering system problem. Verify component compatibility with your steering cylinder before ordering.
Pro Marine Verado Steering Cylinder Seal Kit
Part Number: 2700P
Replacement seal kit for servicing compatible Mercury Verado hydraulic steering cylinders. Replaces Mercury 896173A01.
View Steering Cylinder Seal KitPro Marine Verado Steering Cylinder Mounting Seal
Part Number: 880667
Replacement steering cylinder seal for compatible Mercury Verado steering systems. Replaces Mercury 8M0155530.
View Steering Cylinder SealMercury Verado Remanufactured Steering Cylinder
Part Number: 896500R01
Remanufactured steering cylinder for compatible Mercury Verado and Racing outboard steering applications. An alternative when the existing steering cylinder requires replacement.
View Reman Steering CylinderVerado Steering Cylinder End Cap Removal Tool
Part Number: 8M0078614
Spanner tool used for steering cylinder end cap removal during compatible Mercury Verado steering cylinder service.
View End Cap Removal ToolInspect the existing steering cylinder for restrictions and contaminated or gelled fluid. Repair or replace components as needed, clean the hydraulic system using the appropriate service procedure, and confirm proper fluid circulation before operating the replacement pump.
PRO MARINE TECHNICAL RESOURCES
Mercury Verado Power Steering Technical Center
Need help identifying your Verado power steering generation, selecting replacement components, or determining whether to repair your existing Gen A / Gen B system or upgrade to Gen C?
Verado Power Steering Technical Center
Explore Pro Marine's technical information, steering system components, installation resources, and parts for Mercury Verado hydraulic power steering systems.
Visit Verado Power Steering Tech CenterGen A / Gen B to Gen C Conversion Guide
Considering a Gen C upgrade instead of replacing your existing Gen A or Gen B pump? Review the conversion requirements and additional components needed for the upgrade.
View Gen A / B to Gen C ConversionCompatible Applications
| System | Application | Fitment Note |
|---|---|---|
| Mercury Verado Gen A | Power steering pump replacement | Confirm current pump generation and reuse the existing case. |
| Mercury Verado Gen B | Power steering pump replacement | Replacement option for Gen A / Gen B pump service where Mercury 8M0134736 is being replaced. |
Important Fitment and Installation Note
This Pro Marine replacement pump requires the original case from your existing pump. Before ordering, identify whether your boat has a Gen A, Gen B, or Gen C Verado power steering system.
Compare your existing pump number with the cross references below. This product is intended for the specified Gen A / Gen B replacement applications and is not a direct Gen C replacement.
Before installation: Check the hydraulic system for gelled fluid, contaminated fluid, steering cylinder restrictions, or other conditions that may have contributed to the original pump failure.
OEM and Cross Reference Numbers
| Pro Marine Item Number | 8M0134736P |
|---|---|
| Mercury OEM Number | 8M0134736 |
| Cross Reference Numbers | 8M0134359, 8M0134736 |
| Brand | Pro Marine |
| Warranty | 1 year; void if gelled fluid is found in the pump |
Gen A / Gen B Replacement vs. Gen C Conversion
Replacing the existing Gen A / Gen B pump may be a more economical option than converting the entire steering system to Gen C. A complete conversion can require several additional components.
| Gen C Conversion Item | Previously Listed Cost |
|---|---|
| Pump Assembly | $1,050.00 |
| Adapter Hose | $217.88 |
| Power Steering Harness with Fuse | $84.24 |
| Signal Wire Conversion | $50.23 |
| Automatic Power Source for Applicable Multi-Engine Systems | $268.43 |
Costs shown are historical reference amounts from this product's existing description and are subject to change. Actual conversion requirements vary by steering configuration.
Compare Gen A / B Replacement and Gen C ConversionRelated Verado Power Steering Parts
Explore additional Mercury Verado steering system components for maintenance, repair, and system configuration.
Automatic Power Source
Mercury Verado automatic power source for applicable multi-engine steering systems.
View 8M0149746
Signal Drive Harness Assembly
Mercury power steering signal drive harness assembly for Verado steering system service.
View 8M0026568
Gen B Damper Hose Kit
Mercury Verado Gen B power steering damper hose kit for hydraulic steering service.
View 897643A01
Mercury Power Steering Fluid
Mercury full synthetic power steering fluid for applicable Verado hydraulic steering systems.
View 858077Special Order Verado Steering Hoses
The following Mercury Verado steering hoses are special-order items. Call Pro Marine USA at 941-721-3000 to order. Confirm the required hose length and steering configuration before purchasing.
Helm to Power Steering Pump
Special Order — Must Call to Order
8M0150604 — 2 Foot
8M0150605 — 3 Foot
8M0150606 — 4 Foot
8M0150607 — 5 Foot
8M0150608 — 6 Foot
8M0150610 — 7 Foot
8M0150612 — 8 Foot
8M0150613 — 10 Foot
8M0150614 — 12 Foot
8M0150615 — 14 Foot
8M0150616 — 16 Foot
8M0150617 — 18 Foot
8M0150618 — 20 Foot
8M0150619 — 22 Foot
8M0150620 — 24 Foot
8M0150621 — 26 Foot
8M0150622 — 28 Foot
8M0150623 — 30 Foot
8M0150624 — 32 Foot
Cylinder to Helm
Special Order — Must Call to Order
8M0167281 — 2 Foot
8M0167282 — 3 Foot
8M0167283 — 4 Foot
8M0167284 — 5 Foot
8M0167285 — 6 Foot
8M0167286 — 7 Foot
8M0167287 — 8 Foot
8M0167288 — 10 Foot
8M0167289 — 12 Foot
8M0167290 — 14 Foot
8M0167291 — 16 Foot
8M0167292 — 18 Foot
8M0167293 — 20 Foot
8M0167294 — 22 Foot
8M0167295 — 24 Foot
8M0167296 — 26 Foot
8M0167297 — 28 Foot
8M0167298 — 30 Foot
8M0167299 — 32 Foot
Key Features and Benefits
- Pro Marine Remanufactured Replacement: Aftermarket replacement for compatible Mercury Verado Gen A and Gen B power steering pumps.
- OEM Cross References: Mercury 8M0134359 and 8M0134736.
- Repair Existing Steering System: Provides a replacement option without purchasing every component required for a Gen C conversion.
- Reuse Existing Pump Case: Installation requires the original case from the current pump assembly.
- 1-Year Warranty: Subject to warranty conditions. Coverage is void if gelled fluid is found inside the pump.
- Steering Cylinder Repair Resources: Linked seal kits, replacement cylinder, and end cap removal tool.
- Repair Video: Direct link to Pro Marine's Verado power steering repair video.
- Technical Support Resources: Access to the Verado Power Steering Technical Center and Gen A / B to Gen C conversion guide.
Product Details
| Item Number | 8M0134736P |
|---|---|
| Product Type | Verado Power Steering Pump Replacement |
| Brand | Pro Marine |
| OEM or Aftermarket | Aftermarket — Remanufactured |
| Required Reuse Item | Original Case from Existing Pump |
| Warranty | 1 Year |
| Warranty Exclusion | Warranty void if gelled power steering fluid is found inside the pump. |
Frequently Asked Questions
Is this a replacement for Mercury Verado Gen A and Gen B power steering pumps?
Yes. Pro Marine 8M0134736P is an aftermarket replacement for compatible Mercury Verado Gen A and Gen B power steering pumps. It cross references Mercury 8M0134359 and 8M0134736.
Do I need to reuse my old pump case?
Yes. This replacement requires the original case from your existing power steering pump.
Why do Mercury Verado power steering pumps overheat?
One common cause is restricted hydraulic fluid flow. We frequently encounter systems where power steering fluid has become thick or gel-like and accumulated inside the steering cylinder. These restrictions can force the pump to work harder, leading to overheating and premature failure.
Can gelled power steering fluid damage a replacement pump?
Yes. If gelled fluid or a restriction remains in the hydraulic steering system, a replacement pump can experience the same excessive workload and overheating that damaged the original pump.
Should I inspect the steering cylinder before replacing the pump?
Yes. Inspect the steering cylinder and hydraulic system for gelled fluid, contamination, and restrictions. Correct any problems before operating the replacement pump.
Does gelled power steering fluid void the pump warranty?
Yes. The warranty is void if gelled power steering fluid is found inside the pump. Inspect and service the hydraulic system before installation to help prevent repeat failure.
Does Pro Marine have a video explaining Verado steering problems?
Yes. Watch our Verado Power Steering Repair Video for additional information about steering system service.
Can I rebuild my existing Verado steering cylinder?
Depending on the cylinder's condition and compatibility, repair may be possible using the Pro Marine 2700P Steering Cylinder Seal Kit . Inspect the cylinder for internal damage before deciding whether to repair or replace it.
Is a remanufactured steering cylinder available?
Yes. Pro Marine offers the 896500R01 Remanufactured Verado Steering Cylinder for compatible applications.
Should I replace my Gen A / Gen B pump or upgrade to Gen C?
Replacing the existing pump may be the simpler option when the remainder of the steering system is serviceable. A Gen C conversion requires additional components and configuration checks. Review our Gen A / Gen B to Gen C Conversion Guide to compare the options.
Where can I find Verado power steering technical information?
Visit the Pro Marine Verado Power Steering Technical Center for steering system information, replacement parts, and technical resources.
Are some Verado steering hoses special order?
Yes. Various helm-to-pump and cylinder-to-helm hose lengths are special-order items. Call Pro Marine USA at 941-721-3000 to confirm availability and order.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, hydraulic steering components, and maintenance products to professional marine technicians, repair shops, dealerships, boat builders, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday–Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1–5 business days.
- Shipping times may vary based on destination, carrier service, and availability.
30-Day Return Policy
- Eligible returns are accepted within 30 days of delivery.
- Products must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Power Steering Pump Warranty
1-YEAR WARRANTY — GELLED FLUID EXCLUSION
This Pro Marine replacement pump includes a 1-year warranty.
Warranty coverage will be void if gelled power steering fluid is found inside the pump.
Customers should inspect the hydraulic steering system, including the steering cylinder, for fluid contamination and restrictions before installing the replacement pump. Repair any underlying hydraulic problems before operating the replacement.
Need Help With Your Verado Power Steering System?
Have questions about pump compatibility, steering cylinder repairs, or Gen C conversions?
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
8M0134736P, 8M0134736, 8M0134359, 2700P, 896173A01, 880667, 8M0155530, 896500R01, 8M0078614, 8M0149746, 8M0026568, 8M0137449, 8M0137451, 897643A01, 858077, 858002K01, 858077KC1, 858077K01
Searchable Terms
Mercury Verado power steering pump, Pro Marine Verado power steering pump, Verado Gen A power steering pump, Verado Gen B power steering pump, Mercury Verado remanufactured pump, Mercury Verado replacement steering pump, Verado hydraulic steering pump, Mercury Verado steering pump overheating, Verado steering pump failure, Mercury power steering fluid gel, gelled Mercury steering fluid, Verado gelled hydraulic fluid, Mercury Verado steering cylinder clogged, Verado steering cylinder restriction, Verado steering cylinder rebuild, Verado steering cylinder seal kit, Verado steering cylinder mounting seal, Mercury Verado steering cylinder end cap tool, Mercury Verado reman steering cylinder, Verado steering cylinder repair video, Verado power steering repair, Mercury Verado hydraulic steering problems, Verado Gen A to Gen C conversion, Verado Gen B to Gen C conversion, Mercury Verado power steering technical center, Verado hydraulic steering system maintenance, Pro Marine Verado steering components
8M0134736
0174502
0174997
0175168
0765730
0765731
0775610
0775612
0779481
0779752
16277
16277A1
3851039
3852032
765730
765731
775610
775612
779481
779752
8M0072133
8M0072135
802880A1
802880Q1
802891A1
802891K2
802891Q1
802891Q2
850729A1
858074KC1
858074K01
858074Q01
90100A12
Mercury Marine OEM Power Steering Component
Mercury 897643A01 Verado Gen A/B Power Steering Damper Hose
The Mercury 897643A01 Damper Hose is used in Mercury Verado Generation A and Generation B hydraulic power steering systems.
This hose installs on the pressure side of the Verado power steering system between the helm-to-pump pressure hose and the power steering pump. It is used to help dampen hydraulic pulsation and steering-system noise while maintaining the proper pressure-side connection to the pump.
Part Type: Power Steering Damper Hose
Manufacturer: Mercury Marine
OEM or Aftermarket: OEM
Application: Mercury Verado Gen A / Gen B Power Steering Systems
System Location: Pressure Side - Helm Hose to Power Steering Pump
Manufacturer Item #: 897643A01
OEM and Cross Reference Numbers
| Reference Type | Part Number | Manufacturer |
|---|---|---|
| OEM Part Number | 897643A01 | Mercury Marine |
What This Part is Used For
The 897643A01 damper hose is part of the pressure side of a Mercury Verado hydraulic power steering system. It connects between the pressure-side steering hose and the power steering pump.
In a typical Gen A / Gen B Verado installation, hydraulic hoses run between the steering helm and the electrically assisted power steering pump. The 897643A01 is installed at the pump on the pressure side of the system and helps dampen pressure pulsations that can contribute to steering-system noise.
It is commonly replaced when repairing or refreshing an original Mercury Verado Gen A or Gen B power steering system, particularly when replacing damaged, leaking, deteriorated, or previously removed steering hoses.
This part is intended for Mercury Verado Generation A and Generation B power steering systems. Mercury Gen C power steering systems use a different pump and hose configuration.
When repairing an existing system, confirm the steering generation and existing hose configuration before ordering.
Compatible Applications
| Brand | Engine / System Family | Steering Generation | Application |
|---|---|---|---|
| Mercury Marine | Verado | Gen A | Hydraulic Power Steering System |
| Mercury Marine | Verado | Gen B | Hydraulic Power Steering System |
Mercury Verado engines can use different power steering configurations depending on the steering generation and rigging. Identify whether the boat has a Gen A, Gen B, or later Gen C steering system before ordering steering components.
Related Mercury Verado Power Steering Parts
Pro Marine Gen A/B Verado Power Steering Pump
Replacing a failed original Gen A or Gen B Verado power steering pump? The Pro Marine 8M0134736P replacement pump is designed for the earlier Mercury Verado power steering system and can be used when repairing the system rather than converting it to the later Gen C configuration.
View Gen A/B Power Steering PumpInstallation and Service Tips
- Install the 897643A01 on the pressure side of the Gen A / Gen B Verado power steering system.
- The damper hose is positioned between the helm-to-pump pressure hose and the power steering pump.
- Inspect the surrounding steering hoses and fittings for leaks, cracking, deterioration, or damage whenever servicing the pump.
- Use the correct Mercury-approved steering fluid and properly bleed the hydraulic steering system after opening a hydraulic connection.
- Confirm all hydraulic fittings are secure and check the completed system for leaks before operating the boat.
Key Features and Benefits
- OEM Mercury Component: Genuine Mercury Marine steering-system part.
- Gen A / Gen B Application: Used with earlier Mercury Verado hydraulic power steering systems.
- Pressure-Side Installation: Installs between the pressure hose and the Verado power steering pump.
- Steering Noise Control: Helps dampen hydraulic pulsations that can contribute to steering-system noise.
- Direct Replacement: Ideal when replacing an existing 897643A01 during steering-system service.
FAQ
What does Mercury part number 897643A01 fit?
The 897643A01 damper hose is used in Mercury Verado Generation A and Generation B hydraulic power steering systems.
Where does the 897643A01 hose install?
It installs on the pressure side of the steering system between the helm-to-pump pressure hose and the Mercury Verado power steering pump.
What does the Verado power steering damper hose do?
The damper hose helps absorb hydraulic pressure pulsations in the pressure-side steering circuit and can help reduce steering-system noise.
Can the pressure hose connect directly to the Verado power steering pump?
The pressure-side hose can connect to the pump in applicable Gen A / Gen B configurations, but the 897643A01 damper hose is recommended between the pressure hose and pump to help minimize steering-system noise.
Does 897643A01 fit Mercury Verado Gen C power steering systems?
This listing is for the Gen A / Gen B steering configuration. Gen C systems use a different pump and hose arrangement, so verify your steering generation before ordering.
Should I inspect this hose when replacing the power steering pump?
Yes. Whenever the power steering pump is being serviced, inspect the damper hose, pressure hose, return hose, fittings, and surrounding hydraulic components for leaks or deterioration.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming your Mercury Verado power steering system or ordering the correct steering parts? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
897643A01, Mercury 897643A01
Searchable Terms
Mercury Verado power steering damper hose, Verado damper hose, Mercury power steering hose, Verado Gen A power steering hose, Verado Gen B power steering hose, Mercury Gen A steering, Mercury Gen B steering, Verado steering pump hose, Verado pressure hose, Mercury hydraulic steering hose, OEM Verado steering hose
702755024347
Pro Marine Verado Steering Cylinder Seal Kit
Mercury Verado Hydraulic Steering Cylinder Reseal Kit - 2700P
The Pro Marine 2700P Steering Cylinder Seal Kit is an aftermarket replacement kit for select Mercury Verado hydraulic steering cylinder assemblies.
This kit includes replacement seals and O-rings commonly required to reseal compatible Mercury Verado steering cylinders during hydraulic steering system maintenance and repair.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Mercury Verado 135-400 HP | FourStroke | Hydraulic Steering | Select compatible Mercury Verado steering cylinder assemblies |
| Mercury L6 Verado Models | Supercharged FourStroke | Hydraulic Steering | Select integrated hydraulic steering systems |
| Mercury V8 and V10 Verado Models | FourStroke | Hydraulic Steering | Select compatible Verado steering cylinder assemblies |
Pro Marine 2700P replaces Mercury OEM steering cylinder seal kits 896173A01 and 8M0045604 for compatible steering cylinder assemblies.
Mercury used different steering cylinder configurations depending on engine model, production year, and steering system. Always verify the engine serial number and steering cylinder assembly number before ordering.
OEM Part Numbers and Cross References
| Brand / Type | Part Number |
|---|---|
| Pro Marine Aftermarket | 2700P |
| Replaces Mercury OEM | 896173A01 |
| Replaces Mercury OEM | 8M0045604 |
Watch: Mercury Verado Steering Cylinder Repair and Reseal
See how a Mercury Verado steering cylinder is repaired.
Watch Pro Marine USA demonstrate steering cylinder disassembly, cleaning, inspection, seal replacement, and reassembly. The tutorial also shows an example of contaminated hydraulic steering fluid.
Watch Repair VideoThis video demonstrates the general repair process. Always verify steering cylinder compatibility and follow the applicable Mercury service procedures.
Related Steering Cylinder Components
Depending on the repair being performed, you may also need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine.
See the Pro Marine 880667 Verado Steering Cylinder Seal .
Genuine Mercury OEM Alternative Available
Prefer a genuine Mercury replacement kit? Mercury OEM part number 8M0045604 is the genuine Mercury steering cylinder seal kit for compatible applications. It supersedes older Mercury part number 896173A01.
View Genuine Mercury 8M0045604 Steering Cylinder Seal Kit
What This Steering Cylinder Seal Kit is Used For
The Pro Marine 2700P Steering Cylinder Seal Kit is designed for resealing compatible Mercury Verado hydraulic steering cylinder assemblies.
Hydraulic steering cylinders use internal seals and O-rings to help maintain hydraulic pressure and prevent fluid leakage.
Over time, these components may become worn or damaged, potentially allowing hydraulic fluid leakage or reduced steering performance.
Replacing worn seals during steering cylinder service can help restore proper sealing when the cylinder and other components remain in serviceable condition.
Common Symptoms and Replacement Reasons
- Hydraulic fluid leaking from the steering cylinder
- Visible deterioration or damage to steering cylinder seals
- Loss of hydraulic steering fluid
- Reduced steering performance associated with seal leakage
- Steering cylinder disassembly for inspection or repair
- Seal replacement during steering cylinder service
Important: Steering problems may also be caused by the power steering pump, hydraulic hoses, helm, fluid contamination, or other system components. Replacing steering cylinder seals will not correct every steering problem.
Key Features and Benefits
- Pro Marine aftermarket steering cylinder reseal kit
- Replaces Mercury OEM seal kits 896173A01 and 8M0045604
- Designed for select Mercury Verado hydraulic steering cylinders
- Includes replacement hydraulic seals and O-rings
- Used during steering cylinder rebuilding and reseal service
- Helps address hydraulic fluid leakage caused by worn seals
- Aftermarket alternative to compatible Mercury OEM seal kits
- Steering cylinder repair tutorial available through the video link above
Steering Cylinder Seal Kit Details
- Brand: Pro Marine
- Part Number: 2700P
- Part Type: Hydraulic Steering Cylinder Seal Kit
- Replaces Mercury OEM: 896173A01 and 8M0045604
- Application: Select Mercury Verado Steering Cylinders
- System: Hydraulic Power Steering
- Use: Steering Cylinder Reseal and Repair
- Quantity Sold: One Kit
Installation and Repair Tips
- Verify steering cylinder assembly and replacement seal kit compatibility before beginning repairs.
- Follow the applicable Mercury service manual for cylinder removal, disassembly, inspection, and reassembly.
- Inspect internal cylinder surfaces and components for scoring, corrosion, and other damage.
- Keep hydraulic steering components clean during service to reduce the risk of introducing contamination.
- Use only the hydraulic steering fluid specified for the applicable Mercury steering system.
- Follow the manufacturer's bleeding and testing procedures before returning the steering system to service.
Hydraulic steering is a safety-critical system. Repairs should be performed by qualified personnel using the appropriate service procedures and tools.
Frequently Asked Questions
What does Pro Marine 2700P fit?
The kit fits select Mercury Verado hydraulic steering
cylinder assemblies that use compatible replacement seals.
Verify fitment using the steering cylinder assembly number.
What Mercury OEM seal kits does 2700P replace?
Pro Marine 2700P replaces Mercury OEM seal kit numbers
896173A01 and 8M0045604 for compatible applications.
What is included in the kit?
The kit includes replacement seals and O-rings commonly
required for compatible Verado steering cylinder reseal service.
Can worn steering cylinder seals cause hydraulic fluid leaks?
Yes. Damaged or worn seals may allow hydraulic fluid to escape
from the steering cylinder assembly.
Will replacing the seals fix every Verado steering problem?
No. Steering issues may also involve the power steering pump,
hydraulic hoses, helm, fluid contamination, or other components.
Proper diagnosis is recommended before replacing parts.
Is there a video showing how to rebuild a Mercury Verado steering cylinder?
Yes. Pro Marine USA provides a repair tutorial demonstrating
steering cylinder disassembly, cleaning, inspection,
seal replacement, and reassembly.
Click the video thumbnail above to watch the tutorial on YouTube.
Do I need the additional steering cylinder attachment seal?
Depending on the repair, the steering cylinder attachment seal
may also need replacement. See Pro Marine part number 880667.
Is Pro Marine 2700P a genuine Mercury OEM kit?
No. This is a Pro Marine aftermarket replacement seal kit
for compatible Mercury steering cylinder assemblies.
Genuine Mercury OEM kit 8M0045604 is also available.
Should I verify fitment before ordering?
Yes. Mercury used different steering cylinder configurations
across engine models and production ranges.
Confirm the correct application before purchasing.
Dealer Discounts and Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? Pro Marine USA offers dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help confirming fitment or ordering the correct steering cylinder repair components?
Contact Pro Marine USA
Phone: 941-721-3000
Searchable Part Numbers
2700P, 896173A01, 8M0045604
Searchable Terms
Pro Marine 2700P, Pro Marine Verado steering seal kit, Mercury Verado steering cylinder seal kit, Mercury steering cylinder reseal kit, Mercury hydraulic steering cylinder rebuild kit, Mercury Verado steering cylinder repair, Mercury Verado steering cylinder repair video, Mercury Verado steering cylinder rebuild tutorial, Verado hydraulic steering seal replacement, Verado steering ram seal kit, Mercury power steering cylinder repair, Mercury Verado hydraulic steering repair, Verado steering cylinder service kit, Mercury Verado gelled hydraulic fluid, Mercury Verado steering cylinder disassembly, Mercury Verado steering cylinder reassembly, Verado steering cylinder seal installation
8M0045604
896173A01
Mercury Verado Power Steering Helm
Mercury Verado 50cm Tilt Power Steering Helm
This OEM Mercury 50cm power steering helm is the tilt version for Mercury Verado power steering systems. It is used when the boat requires an adjustable steering wheel position instead of a fixed non-tilt helm.
Match your original helm number, steering setup, and cross-reference numbers before ordering. For Verado pump service, Gen A/B replacement and Gen C pump options are linked below, along with Pro Marine's Gen B to Gen C conversion walkthrough.
Compatible Applications
| System | Helm Type | Fitment Note |
|---|---|---|
| Mercury Verado power steering systems | 50cm tilt helm | Verify the current helm number, steering configuration, and OEM cross-reference before ordering. |
Important Fitment Note
This is the tilt Mercury Verado helm. If the boat uses a fixed steering wheel position and does not need tilt adjustment, order the Mercury Verado 50cm non-tilt helm, item 8M0137449.
OEM & Cross Reference Numbers
| Type | Part Numbers |
|---|---|
| Pro Marine Item Number | 8M0137451 |
| Mercury Manufacturer Item | 8M0137451 |
| Cross Reference Numbers | 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0137451, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53 |
What This Part is Used For
The helm is the steering control unit mounted behind the steering wheel at the dash. This Mercury 8M0137451 helm is used when replacing the adjustable tilt helm in a compatible Verado power steering system.
If the steering system has been converted, repaired, or mixed with later-generation pump components, verify the helm, hose, pump, and harness requirements before ordering.
Related Verado Power Steering Parts
Helm Power Steering Std 50Cm
Mercury Verado 50cm standard non-tilt power steering helm. Order this version when the application requires a fixed steering wheel position.
Item #: 8M0137449
View Non-Tilt Helm
Power Steering Fluid
Mercury full synthetic power steering fluid for compatible Mercury and Verado power steering service.
Item #: 858077
View Power Steering Fluid
Mercury Verado Gen A/B Power Steering Pump Replacement
Pro Marine replacement pump for Gen A and Gen B Verado power steering systems. Cross references 8M0134359 and 8M0134736.
Item #: 8M0134736P
View Gen A/B Pump
Power Steering Pump
OEM Mercury Verado Gen C power steering pump. Pump only; hoses and conversion parts are sold separately when required.
Item #: 8M0199048
View Gen C PumpGen B to Gen C Conversion Help
If you are replacing a Verado power steering pump and need to identify whether your boat has a Gen A/B or Gen C system, review Pro Marine's conversion walkthrough before ordering pump, harness, hose, or steering components.
Read the Verado Gen B to Gen C Power Steering Conversion GuideKey Features and Benefits
- OEM Mercury Marine 50cm power steering helm.
- Tilt design allows adjustable steering wheel positioning.
- Fits Verado power steering systems when the original application calls for this tilt helm.
- Cross references common Mercury tilt helm numbers including 892516A01, 892516A02, 892516K31, and 892516K32.
- Related non-tilt helm, power steering fluid, Gen A/B pump, Gen C pump, and conversion guide are linked for easier steering system service planning.
Product Details
| Product | Helm Power Steering With Tilt |
| Application | Mercury Verado power steering systems |
| Manufacturer | Mercury Marine |
| OEM or Aftermarket | OEM |
| Helm Style | Tilt |
FAQ
Is this the tilt helm?
Yes. This is the Mercury Verado 50cm tilt power steering helm. For the non-tilt version, order item 8M0137449.
What does this helm fit?
This helm fits Verado power steering systems that require the 50cm tilt helm. Verify your original helm part number and steering configuration before ordering.
Which pump should I order with Verado steering service?
Identify the pump generation first. Pro Marine offers a Gen A/B replacement pump, item 8M0134736P, and an OEM Mercury Gen C pump, item 8M0199048. Use the Gen B to Gen C conversion walkthrough if you are planning an upgrade.
Is power steering fluid linked for this system?
Yes. Mercury full synthetic power steering fluid is available separately as item 858077.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury Verado tilt power steering helm, Mercury Verado 50cm helm, adjustable Verado helm, OEM Mercury tilt helm, Verado hydraulic power steering helm, Verado Gen B to Gen C conversion, Verado Gen C pump, Verado Gen A B pump.
Searchable Part Numbers
8M0137451, 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53, 8M0137449, 858077, 858077K01, 858002K01, 858077KC1, 8M0134736P, 8M0134736, 8M0134359, 8M0199048.
8M0134636
8M0134637
8M0134638
8M0137451
8M0151559
892516A01
892516A02
892516K01
892516K02
892516K03
892516K11
892516K12
892516K31
892516K32
892516K33
892516K51
892516K52
892516K53
