S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Shop Yamaha outboard engine rebuild parts by engine model and family. Find pistons, piston rings, bearings, connecting rods, gaskets, cylinder sleeves, valves, and other internal powerhead components for Yamaha outboard repair and rebuild projects.
Select your Yamaha engine family below to narrow the parts to the correct application.
Shop Yamaha Engine Rebuild Parts by Model
Tip: Do not select Yamaha engine rebuild parts by horsepower alone. Confirm the engine family, model code, displacement, serial information, and OEM part number whenever possible.
Common Yamaha Outboard Engine Rebuild Parts
- Pistons and piston ring sets
- Main and connecting rod bearings
- Connecting rods and rod bolts
- Powerhead and engine gasket kits
- Oil seals and internal engine seals
- Cylinder sleeves
- Valves, valve seats, and valve springs
- Other model-specific internal powerhead components
How to Choose the Correct Yamaha Rebuild Parts
Yamaha outboards with similar horsepower ratings can use different pistons, bearings, gaskets, rods, and other internal components depending on the engine family, displacement, model code, and production range.
Start by selecting the correct engine family above. Then compare your Yamaha model information and OEM part numbers with the individual product listings before ordering.
Yamaha Powerhead Rebuild Information
The exact parts required for a Yamaha powerhead rebuild depend on engine condition and measurements taken during teardown. Cylinder condition, crankshaft journals, bearing clearances, pistons, rings, connecting rods, valves, and sealing surfaces should be inspected before final parts are selected.
If cylinder machining is required, determine whether standard or oversize pistons, rings, or cylinder sleeves are needed before ordering internal engine components.
Frequently Asked Questions
What parts are commonly replaced during a Yamaha outboard rebuild?
Depending on engine condition, a rebuild may require pistons, rings, main bearings, rod bearings, connecting rods, gaskets, seals, cylinder sleeves, valves, and other internal powerhead components.
Can I find Yamaha rebuild parts by horsepower?
Horsepower is a useful starting point, but it should not be the only fitment identifier. Yamaha engines with the same horsepower can use different parts depending on engine family, displacement, model, and production range.
Do you carry OEM and aftermarket Yamaha rebuild parts?
Pro Marine USA carries genuine Yamaha OEM parts along with quality OEM specification aftermarket replacement parts for many Yamaha outboard rebuild applications.
How do I identify the correct Yamaha part number?
Use your Yamaha engine model information with the OEM parts lookup to locate the factory diagram and original part number, then search that number on Pro Marine USA for available replacement options.
Helpful Links
63P-W1164-01-00
Genuine Yamaha OEM Connecting Rod Bolt
Yamaha F75, F80, F90 & F100 Connecting Rod Bolt - 67F-11654-00-00
The Yamaha 67F-11654-00-00 Rod Bolt is a genuine OEM connecting rod fastener for select Yamaha four-stroke outboard engines.
Verified applications include select F75, F80, F90 and F100 four-stroke models from the late 1990s through the mid-2000s.
Because Yamaha used different connecting rod and rod-bolt designs across similar horsepower families, verify the complete engine model before ordering.
OEM Number: 67F-11654-00-00
Component: Connecting Rod Bolt
Engine Families: F75, F80, F90 and F100
OEM Number
| Brand / Type | Part Number |
|---|---|
| Yamaha OEM | 67F-11654-00-00 |
Yamaha Outboard Fitment
| Engine Family | Verified Models |
|---|---|
| F75 |
F75TLRB - 2003 F75TLRC - 2004 F75TLRD - 2005 |
| F80 |
F80TLRX - 1999 F80TXRX - 1999 F80TLRY - 2000 F80TXRY - 2000 F80TLRZ - 2001 F80TJRA - 2002 F80TLRA - 2002 F80TJRB - 2003 F80TLRB - 2003 |
| F90 |
F90TJRB - 2003 F90TLRB - 2003 F90TJRC - 2004 F90TLRC - 2004 F90TJRD - 2005 F90TLRD - 2005 F90TXRD - 2005 |
| F100 |
F100TLRX - 1999 F100TXRX - 1999 F100TLRY - 2000 F100TXRY - 2000 F100TLRZ - 2001 F100TXRZ - 2001 F100TLRA - 2002 F100TXRA - 2002 F100TLRB - 2003 F100TXRB - 2003 |
Do not select a connecting rod bolt by horsepower alone. Yamaha used different connecting rod and fastener configurations across similar engine families.
Verify the complete model number and confirm the application calls for 67F-11654-00-00 before ordering.
What This Part is Used For
The connecting rod bolt secures the connecting rod cap to the connecting rod around the crankshaft journal.
This fastener is subjected to repeated tensile and cyclic loading as the piston and connecting rod accelerate and decelerate during engine operation. Correct bolt condition and installation are critical during a powerhead rebuild.
When Should a Rod Bolt Be Replaced?
Connecting rod bolts should be inspected whenever the connecting rod is removed during engine disassembly.
Follow the Yamaha service manual for the exact model for reuse criteria, tightening sequence and torque procedure. If Yamaha specifies replacement after removal, install a new bolt rather than reusing the original fastener.
Inspect During Connecting Rod Service
- Connecting rod big-end bore
- Connecting rod cap mating surfaces
- Connecting rod bearing condition
- Crankshaft rod journal condition
- Rod bolt threads
- Rod bolt seating surfaces
- Piston pin and small-end bore
- Piston condition
Powerhead Rebuild Installation Notes
Internal engine fasteners should always be installed according to the Yamaha service procedure for the exact engine being rebuilt.
Keep each connecting rod cap matched to its original connecting rod and orientation, and verify crankshaft journal and bearing clearances before final assembly.
Do not substitute another Yamaha rod bolt simply because it appears physically similar.
Shop Yamaha Engine Rebuild Parts by Model
Pro Marine stocks pistons, rings, connecting rod bearings, crankshaft bearings, rod bolts, cylinder sleeves, valves, gaskets and other internal Yamaha four-stroke engine components.
Yamaha Outboard Engine Rebuild Parts by Model
Browse Yamaha rebuild parts by engine family and horsepower to locate the correct internal components for your powerhead.
Key Features
- Genuine Yamaha OEM connecting rod bolt
- OEM number 67F-11654-00-00
- Fits select Yamaha F75 applications
- Fits select Yamaha F80 applications
- Fits select Yamaha F90 applications
- Fits select Yamaha F100 applications
- Verified fitment spans 1999-2005 model applications
- Used to secure the connecting rod cap to the connecting rod
- Designed for internal Yamaha four-stroke powerhead service
FAQ
What is the OEM number for this Yamaha rod bolt?
The OEM number is 67F-11654-00-00.
Is this a genuine Yamaha part?
Yes. This listing is for a genuine Yamaha OEM connecting rod bolt.
Does 67F-11654-00-00 fit Yamaha F75?
Yes. Verified applications include F75TLRB, F75TLRC and F75TLRD models
from 2003-2005.
Does it fit Yamaha F80?
Yes. Select F80 applications from 1999 through 2003
are included in the verified fitment.
Does it fit Yamaha F90?
Yes. Verified applications include select F90 models from
2003 through 2005.
Does it fit Yamaha F100?
Yes. Verified F100 applications range from
1999 through 2003.
Can I reuse my original connecting rod bolt?
Follow the Yamaha service manual for the exact engine. If Yamaha specifies
replacement after removal, or if the bolt is damaged or questionable,
install a new OEM bolt.
Should I verify my full Yamaha model number?
Yes. Yamaha used different rod bolts across similar horsepower engines, so
the complete model designation should be verified before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning parts.
Need help verifying fitment?
Contact Pro Marine
Phone: 941-721-3000
Searchable Part Numbers & Terms
67F-11654-00-00, 67F116540000, Yamaha 67F-11654, Yamaha rod bolt, Yamaha connecting rod bolt, Yamaha F75 rod bolt, Yamaha F80 rod bolt, Yamaha F90 rod bolt, Yamaha F100 rod bolt, F75 connecting rod bolt, F80 connecting rod bolt, F90 connecting rod bolt, F100 connecting rod bolt, Yamaha four stroke rod bolt, Yamaha powerhead rod bolt, Yamaha connecting rod fastener, Yamaha engine rebuild parts, Yamaha powerhead rebuild parts
18-3847
506-21
6L2-11181-A1-00
6L2-11181-A1-00
6L2-11181-A2-00
6L2-11181-A2-00
6L2-11181-A3-00
6L2-11181-A3-00
6L2-11181-00-00
6L2-11181-00-00
18937
18937M
33890
506-30
6E7-11181-A0-00
6E7-11181-A1-00
6E7-11181-A2-00
6E7-11181-00-00
6E7-11181-02-00
682-11181-A0-00
682-11181-00-00
682-11181-01-00
682-11181-02-00
83899M
9-63957
9-63962
98990M