S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Johnson, Evinrude & E-TEC Outboard Parts
Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Johnson, Evinrude & E-TEC Parts by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Find the Correct Johnson, Evinrude or E-TEC Part
Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Johnson, Evinrude & E-TEC Engine Families
Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.
- Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
- Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
- V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
- High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
- Ficht / FFI: direct-injection Johnson and Evinrude engine families
- E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges
Common Johnson & Evinrude Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
- No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
- Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?
- OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
- Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of older OMC-era parts and modern E-TEC service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Johnson or Evinrude outboard part?
Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.
Can I search Johnson and Evinrude parts by OEM part number?
Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Johnson and Evinrude parts vary by model and year?
Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.
Do you carry parts for Evinrude E-TEC engines?
Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.
Do you carry parts for older Johnson and Evinrude outboards?
Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.
What Johnson and Evinrude parts are commonly replaced during routine maintenance?
Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.
Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Replacement Hydraulic Steering Cylinder
Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder
The Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder is the replacement steering cylinder used with the Pro Marine 350-HSTEER hydraulic steering system. It is designed for high-horsepower single outboard setups where smooth, controlled steering response is critical.
This is the cylinder only. Helm pump, hoses, steering fluid, and fill/bleed accessories are sold separately unless purchased as part of the complete 350-HSTEER system.
What This Cylinder Is Used For
The steering cylinder converts hydraulic pressure from the helm pump into side-to-side movement at the outboard engine. It is the component that physically moves the engine when you turn the steering wheel.
If your current cylinder is leaking, damaged, binding, or worn, replacing it can restore proper steering control and improve the overall feel of the system.
Read our 350-HSTEER Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| 350-HSTEER Systems | Replacement hydraulic steering cylinder |
| Single Outboards up to 350HP | High-horsepower hydraulic steering applications |
| Bass Boats | Responsive steering and control at speed |
| Bay Boats | Smooth steering in shallow and open water |
| Center Consoles | Reliable steering feel for offshore and coastal use |
Build or Service Your Steering System
Complete Steering Kit
Need the full system instead of just the cylinder? The complete kit includes the cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHelm Pump
Pair this cylinder with the matching Pro Marine helm pump for proper hydraulic steering operation.
View 350-HELM-025 Helm PumpHydraulic Hoses
Select the correct hydraulic hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Hose
Hydraulic fluid and a fill hose assembly help make installation and bleeding easier during service.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Complete Your Steering Setup
Need additional Pro Marine steering components?
Key Features and Benefits
- Replacement hydraulic steering cylinder for 350-HSTEER systems
- Designed for high-horsepower single outboard steering applications
- Helps restore smooth steering movement and control
- Front-mount hydraulic steering cylinder design
- Works with hydraulic helm, hose, and fluid circuit
- Good option for service, repair, or steering system rebuilds
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Steering cylinder
- Connection Type: Hydraulic hose connections to helm circuit
- Typical Use: Single outboard applications up to 350HP when used with the proper system
- Related Components: Helm pump, hydraulic hoses, steering fluid, fittings, and fill/bleed tools
FAQ
Is this the complete steering system?
No. This listing is for the hydraulic steering cylinder only. The complete
system is available as the Pro Marine 350-HSTEER kit.
What system does this cylinder work with?
This cylinder is designed for use with the Pro Marine 350-HSTEER hydraulic
steering system.
Are hydraulic hoses included?
No. Hydraulic hoses are sold separately so you can choose the correct length
for your boat and rigging layout.
When should I replace a steering cylinder?
Replace the cylinder if it is leaking, damaged, binding, corroded, or no
longer holding proper steering control.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HSTEER-CYL, Pro Marine hydraulic steering cylinder, hydraulic steering cylinder, outboard steering cylinder, front mount steering cylinder, 350-HSTEER replacement cylinder, hydraulic steering repair, boat steering cylinder