Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2425 - 2436 of 2557 ▶ ▶|
View:
Mercury 2.0L BottomGuided
Item#:
18-4575
Cross Reference#:
7348A2
7445A12
7445A2
9-53265
Manufacturer Item:
7445A12
Manufacturer:
Sierra
Available:
In Stock
Your Price:
62.49
Each
Johnson Evinrude 120-300hp 85-87 Small Bore Looper
This item has been discontinued and replaced by item 
Item#:
1830P
Cross Reference#:
0393612
18-4102
23840
393612
5006660
9-53426
Manufacturer Item:
393612
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
77.94
Each
This item is discontinued
Johnson/Evinrude V4 V6 Small Bore Looper
This item has been discontinued and replaced by item 
Item#:
1820SV
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
87.30
Each
This item is discontinued
Johnson Evinrude 120-300hp 85-87 Small Bore Looper
This item has been discontinued and replaced by item 
Item#:
1830S
Cross Reference#:
18-4101
23850
391653
9-53427
Manufacturer Item:
391653
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
77.94
Each
This item is discontinued
Johnson/Evinrude V4 V6 Small Bore Looper
Item#:
1830SV
Cross Reference#:
391653
Manufacturer Item:
391653
Manufacturer:
Johnson/Evinrude
Available:
In Stock
Your Price:
87.30
Each
Johnson Evinrude 120-300hp 85-87 Small Bore Looper
Item#:
1800S
Cross Reference#:
23810
391481
9-53431
Manufacturer Item:
391481
Manufacturer:
Johnson/Evinrude
Available:
In Stock
70.0000
Your Price:
59.50
Each
Low Perm 1FT Oetiker Clamp # 4-118
Item#:
314
Manufacturer:
Sierra
Available:
In Stock
Your Price:
2.29
Foot
Johnson Evinrude 75-175hp FFI 2000-2006 OE: 439527
Item#:
5030P
Cross Reference#:
0439527
0778500
24480
439527
5000814
5006717
5006729
778500
Manufacturer Item:
5000814
Manufacturer:
Johnson/Evinrude
Available:
In Stock
Your Price:
60.31
Each
Johnson Evinrude 75-175hp FFI 3.600 Bore
Item#:
5000P
Cross Reference#:
24440
5000812
5006727
Manufacturer Item:
5000812
Manufacturer:
Johnson/Evinrude
Available:
In Stock
Your Price:
123.10
Each
Johnson Evinrude 75-175hp FFI 2000-2006 OE: 439528
Item#:
5030S
Cross Reference#:
0439528
24490
439528
5000815
5006718
5006730
Manufacturer Item:
5000815
Manufacturer:
Johnson/Evinrude
Available:
In Stock
Your Price:
122.77
Each
Evinrude 200-300 90º E-tec Blem Installed - Still New
Item#:
BL3210P2
Available:
In Stock
Your Price:
85.00
Each
Johnson/Evinrude 150-235hp
This item has been discontinued and replaced by item 
Item#:
7417
Cross Reference#:
0329381
18-7417
329381
Manufacturer Item:
329381
Manufacturer:
Sierra
Available:
Out of Stock
Your Price:
3.69
Each
This item is discontinued
|◀ ◀ 2425 - 2436 of 2557 ▶ ▶|
View: