S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Johnson, Evinrude & E-TEC Outboard Parts
Shop Johnson, Evinrude, and E-TEC outboard motor parts by system, including cooling, fuel delivery, electrical, engine rebuild components, and lower unit parts. Browse OEM and replacement marine parts for maintenance, repair, and rebuild projects.
Shop by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Common Johnson, Evinrude & E-TEC Model References
This category supports many popular Johnson and Evinrude outboards, including E-TEC models across a wide horsepower range. Always confirm model and serial number for best fitment.
- Small Outboards: 2HP–30HP (2-stroke & 4-stroke)
- Midrange: 35HP–90HP (carbureted & EFI)
- V4 / V6 Ranges: 115HP, 135HP, 140HP, 150HP, 175HP
- High Horsepower: 200HP, 225HP, 250HP, 300HP (including E-TEC models)
- Platforms: Carbureted, Ficht/FFI, and E-TEC Direct Injection
Always confirm your exact horsepower, model year, and serial number to ensure proper part compatibility before ordering.
0765749
175158
18-0871
18-0871-1
18-7044
765749
Engine Rebuild Kit 1530K Johnson Evinrude 90 140 HP V4 1976-1988
The Pro Marine 1530K Engine Rebuild Kit provides the major internal components required to rebuild Johnson and Evinrude V4 crossflow outboard engines produced from 1976 through 1988 in the 90-140 horsepower range.
This .030 over Vertex rebuild kit is designed for engines that have been bored oversize during machine work. The kit includes oversize pistons, rod bearings, crankshaft bearings, seals, and a complete powerhead gasket set required during a full engine rebuild.
Available Bore Size Options
This engine rebuild kit is available in multiple bore sizes depending on your cylinder condition after machining.
| Part Number | Bore Size | Description |
|---|---|---|
| 1500K | Standard | Standard bore rebuild kit for engines that have not been bored oversize |
| 1520K | .020 Over | For engines bored .020 inches oversize during cylinder machining |
| 1530K | .030 Over | For engines bored .030 inches oversize during cylinder machining |
Always confirm the final cylinder bore size with your machine shop before ordering pistons or rebuild kits.
Compatibility
This rebuild kit fits Johnson and Evinrude V4 crossflow 2-stroke outboard engines produced from 1976-1988 in the 90-140 HP range.
| Brand | Application | HP Engine | Fuel System | Notes |
|---|---|---|---|---|
| Johnson | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
| Evinrude | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
Application Chart
| Brand | Engine Type | Horsepower | Cylinders | Engine Family |
|---|---|---|---|---|
| Johnson | Outboard | 90 HP | V4 | Crossflow |
| Johnson | Outboard | 100 HP | V4 | Crossflow |
| Johnson | Outboard | 115 HP | V4 | Crossflow |
| Johnson | Outboard | 140 HP | V4 | Crossflow |
| Evinrude | Outboard | 90 HP | V4 | Crossflow |
| Evinrude | Outboard | 100 HP | V4 | Crossflow |
| Evinrude | Outboard | 115 HP | V4 | Crossflow |
| Evinrude | Outboard | 140 HP | V4 | Crossflow |
Engine Model Compatibility
This rebuild kit fits many Johnson and Evinrude V4 crossflow outboards produced between 1976 and 1988.
- J90ELCTS
- J90TLCTS
- J100ELCTS
- J100TLCTS
- J115ELCTS
- J115TLCTS
- J140ELCTS
- J140TLCTS
- E90TLCTS
- E100TLCTS
- E115TLCTS
- E140TLCTS
What Is Included
- .030 over Vertex pistons
- Piston ring sets
- Wrist pins
- Piston circlips
- Rod bearings
- Upper main crankshaft bearing
- Center main crankshaft bearings
- Lower main crankshaft bearing
- Complete powerhead gasket set
- Oil seals
- O rings
- Intake gaskets
- Exhaust gaskets
- Cylinder head gaskets
Part Numbers and Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 1530K |
What This Kit Is Used For
The 1530K rebuild kit is used when rebuilding Johnson and Evinrude V4 crossflow outboards that have been bored .030 oversize during cylinder machining.
Replacing pistons, bearings, gaskets, and seals during a powerhead rebuild restores compression and engine reliability while extending engine life.
FAQ
What engines does this rebuild kit fit?
Johnson and Evinrude 90-140 HP V4 crossflow outboards produced between 1976 and 1988.
What does .030 over mean?
It means the cylinders have been machined .030 inches larger than the original bore and require oversize pistons.
Does this kit include pistons and rings?
Yes. Vertex pistons, piston rings, wrist pins, and circlips are included.
Are crankshaft bearings included?
Yes. Upper, center, and lower crankshaft main bearings are included.
Dealer Discounts
Are you in the marine industry? Pro Marine offers wholesale pricing and dealer discounts for marine repair shops, boat dealers, marinas, and parts retailers.
If your business regularly purchases outboard engine parts, we invite you to apply for a Pro Marine dealer account.
Contact Pro Marine
Phone 941-721-3000
Contact Us Online
Shipping Policy
- Free shipping on orders over $100
- Continental United States only
- Orders ship via UPS USPS or FedEx
- Orders placed before 5:30 PM EST typically ship the same day
- Most deliveries arrive within 1-5 business days
Searchable Part Numbers
Pro Marine Part
1530K
Common Searches
Johnson 90 rebuild kit .030
Johnson 100 rebuild kit .030
Johnson 115 rebuild kit .030
Johnson 140 rebuild kit .030
Evinrude 90 rebuild kit .030
Evinrude 115 rebuild kit .030
Evinrude 140 rebuild kit .030
OMC V4 rebuild kit .030
584645
0393103
0393109
0777753
18-7820
312699
393103
393109
40820
777753
878962
584597