Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1381 - 1392 of 2557 ▶ ▶|
View:
Johnson Evinrude 9.9-15hp
Item#:
8400
Cross Reference#:
0325262
0325296
0777373
18-3931
23710
325262
777373
802488
802491
802495
9-54404
Manufacturer Item:
386279
Manufacturer:
GLM
Available:
In Stock
Your Price:
35.31
Each
Pro Marine Control Box with Ignition, Trim Switch and Safety Lanyard

Pro Marine Single-Engine Side Mount Control

Johnson Evinrude E-TEC Single Engine Side Mount Control - 4-5006180

Pro Marine 4-5006180 is a complete single-engine surface side-mount remote control for compatible Johnson, Evinrude and Evinrude E-TEC outboard applications using the traditional mechanical shift and throttle control system.

The control combines throttle, shift, ignition, power trim, engine cut-off safety switch and warning functions into one convenient side-mount control assembly.

Pro Marine 4-5006180 replaces numerous Johnson / Evinrude / OMC / BRP control numbers including 0175944, 0176380, 0176381, 0177217, 0177218, 0177224, 0177225, 0434057, 5006180 and 5006181.

Pro Marine 4-5006180 Side Mount Control

Part Type: Single Engine Side Mount Remote Control
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Application: Johnson / Evinrude / E-TEC Outboards
Control Type: Mechanical Shift and Throttle
Mounting: Surface Side Mount
Manufacturer Item #: 5006180
Pro Marine Item #: 4-5006180

Compatible Applications

Pro Marine 4-5006180 is designed for many Johnson, Evinrude and Evinrude E-TEC single-engine installations using compatible BRP / OMC mechanical throttle and shift rigging.

The BRP control design represented by OEM number 5006180 is intended as a direct-style control for many 1996 and newer Johnson / Evinrude applications.

Application Compatibility Notes
Johnson / Evinrude 1996 and Newer Compatible mechanical-control applications
Evinrude E-TEC Compatible Mechanical-Control Models Used with compatible SystemCheck / BRP mechanical rigging
Johnson / Evinrude 1973-1995 May require adapter harness and additional trim harness
Important Fitment Note

This control is selected by the engine's rigging system, wiring harness and control-cable configuration, not simply by horsepower.

For many 1996 and newer Johnson, Evinrude and mechanically controlled E-TEC applications, this control matches the 5006180-style BRP control system.

Earlier 1973-1995 Johnson and Evinrude engines may use this control with the correct adapter harness and additional trim wiring.

Always verify the existing control, engine wiring and OEM control number before ordering.

Supplied Johnson and Evinrude Fitment

The supplied application information includes a very large number of Johnson and Evinrude model-number applications as well as dedicated Remote Control, Electrical and Instruments/Rigging application listings.

The supplied catalog data contains engine applications across numerous horsepower families and includes remote-control listings through 2000.

Because the control can be used across many engine families, matching the control system and wiring configuration is more reliable than selecting the control by horsepower alone.

OEM and Cross Reference Numbers

Pro Marine 4-5006180 replaces or cross-references the following Johnson, Evinrude, OMC and BRP control numbers.

Brand / Type Part Number
Pro Marine 4-5006180
BRP / Johnson / Evinrude 5006180
BRP / Johnson / Evinrude 5006181
Johnson / Evinrude / OMC 0175944 / 175944
Johnson / Evinrude / OMC 0176380 / 176380
Johnson / Evinrude / OMC 0176381 / 176381
Johnson / Evinrude / OMC 0177217 / 177217
Johnson / Evinrude / OMC 0177218 / 177218
Johnson / Evinrude / OMC 0177224 / 177224
Johnson / Evinrude / OMC 0177225 / 177225
Johnson / Evinrude / OMC 0434057 / 434057

What is Included in the Control

This side-mount control combines the primary helm controls needed for a compatible single-engine Johnson, Evinrude or E-TEC installation.

  • Single-lever throttle and shift control
  • Push-to-prime ignition switch
  • Thumb-operated power trim and tilt switch in the handle
  • Engine emergency cut-off switch
  • Safety lanyard
  • Warning horn
  • Neutral lock
  • Start-in-gear prevention
  • Adjustable throttle friction

What This Control is Used For

The side-mount control is the operator's primary interface with a mechanically controlled outboard.

Moving the control lever operates both the throttle and shift systems, allowing the operator to select forward, neutral and reverse while controlling engine speed.

The integrated ignition switch starts and stops the engine, while the trim switch in the handle lets the operator adjust engine trim without removing a hand from the control lever.

The integrated engine cut-off switch and safety lanyard add an important safety function at the helm.

Port or Starboard Side Mounting

The 5006180-style surface control is designed so it can be installed on either the port or starboard side of a compatible helm or console installation.

This makes it useful for a wide range of center-console, side-console and other single-engine boat layouts.

Control Cable Compatibility

The 5006180-style control uses the later Johnson/Evinrude mechanical control-cable system used on post-1979 applications.

Need Johnson / Evinrude Control Cables?

Pro Marine stocks compatible Johnson/Evinrude-style control cables for many 1979 and newer mechanical-control applications.

View Johnson / Evinrude Control Cables

Using This Control on Older Johnson and Evinrude Engines

Earlier Johnson and Evinrude engines may use different electrical connectors even though the mechanical shift and throttle system can be compatible with this style of control.

Published BRP application information indicates that 1973-1995 Johnson and Evinrude engines require an adapter harness and additional trim harness when converting to the later 5006180-style control.

Replacing an Older OMC Control?

Finding your old control number in the cross-reference list is a good starting point, but inspect the engine harness and trim wiring before installation.

Older Johnson/Evinrude engines may require additional wiring adapters to connect to the newer control assembly.

Evinrude E-TEC Applications

BRP used the 5006180 surface side-mount control within compatible SystemCheck mechanical rigging systems, including Evinrude E-TEC rigging applications.

This control should be used only where the E-TEC engine is configured for the compatible mechanical shift/throttle and BRP control-harness system. It should not be selected for an electronically controlled engine solely because the engine carries the E-TEC name.

Common Reasons to Replace a Side Mount Control

  • Worn or excessively loose control lever
  • Damaged throttle or shift mechanism
  • Failed ignition switch
  • Failed trim switch
  • Damaged control wiring or harness
  • Broken neutral-lock mechanism
  • Corrosion or internal wear in an older control box
  • Converting an older Johnson/Evinrude control to a later-style assembly
  • Complete boat rerigging or restoration

Installation Tips

  • Verify the original control part number before ordering.
  • Confirm the engine uses mechanical throttle and shift cables.
  • Verify engine-harness connector compatibility.
  • Determine whether an adapter harness is needed on an older engine.
  • Confirm power-trim wiring compatibility before installation.
  • Inspect existing control cables and replace worn or stiff cables.
  • Route cables with smooth bends and avoid tight radius bends.
  • Check full forward, neutral and reverse operation after installation.
  • Verify neutral-start protection before operating the boat.
  • Test power trim, ignition, warning horn and engine cut-off functions.

Key Features and Benefits

  • Pro Marine aftermarket single-engine side mount control
  • Replaces BRP / Johnson / Evinrude 5006180
  • Designed for compatible mechanical-control outboards
  • Fits many Johnson, Evinrude and Evinrude E-TEC applications
  • Surface side-mount design
  • Can be mounted on port or starboard side
  • Integrated ignition switch
  • Push-to-prime starting function
  • Thumb-operated trim switch
  • Emergency engine cut-off switch and lanyard
  • Warning horn included
  • Neutral lock
  • Start-in-gear prevention
  • Adjustable throttle friction
  • Extensive OEM cross-reference coverage

FAQ

What is Pro Marine 4-5006180?
It is a single-engine surface side-mount remote control for compatible Johnson, Evinrude and Evinrude E-TEC mechanical-control outboards.

What does 4-5006180 replace?
It crosses to Johnson/Evinrude/BRP numbers 0175944, 0176380, 0176381, 0177217, 0177218, 0177224, 0177225, 0434057, 5006180 and 5006181.

Does this control fit Evinrude E-TEC engines?
It fits compatible E-TEC applications using the appropriate mechanical shift/throttle and BRP/SystemCheck control configuration. Verify the specific engine rigging system before ordering.

Does it fit Johnson and Evinrude engines before 1996?
Earlier engines may be mechanically compatible, but published BRP application information indicates that 1973-1995 engines require an adapter harness and additional trim harness when using this later-style control.

Does this include an ignition switch?
Yes. The control includes an integrated push-to-prime ignition switch.

Does this control have a trim switch?
Yes. A thumb-operated power trim switch is integrated into the control handle.

Does it include a kill-switch lanyard?
Yes. The control includes an engine emergency cut-off switch and safety lanyard.

Can this be mounted on either side of the boat?
Yes. The 5006180-style surface control can be mounted on either the port or starboard side in a compatible installation.

Does this use mechanical control cables?
Yes. This is a mechanical throttle and shift control for compatible Johnson/Evinrude-style control cables.

Will it fit every Johnson, Evinrude or E-TEC engine?
No. Wiring systems, electronic controls and rigging configurations vary. Verify the original control number, control cables and engine harness before ordering.

Can this be used on a sterndrive?
No. The 5006180-style BRP side-mount control is intended for compatible outboard applications and is not specified for sterndrive use.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers

4-5006180, 5006180, 5006181, 0175944, 175944, 0176380, 176380, 0176381, 176381, 0177217, 177217, 0177218, 177218, 0177224, 177224, 0177225, 177225, 0434057, 434057

Searchable Terms

Johnson side mount control, Evinrude side mount control, Evinrude E-TEC side mount control, Johnson control box, Evinrude control box, E-TEC control box, BRP side mount control, OMC side mount control, Johnson throttle control, Evinrude throttle control, E-TEC mechanical control, single engine side mount control, outboard throttle shift control, Johnson Evinrude remote control, 5006180 control box, 5006181 control box

Item#:
4-5006180
Cross Reference#:
0175944
0176380
0176381
0177217
0177218
0177224
0177225
0434057
5006180
5006181
Manufacturer Item:
5006180
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
307.97
Each
Johnson/Evinrude 70-235hp V4 V6 OMC Cobra 1986-1988
Item#:
T1150M
Cross Reference#:
0391264
0393259
0393988
0394176
0395840
0777785
0778247
0983019
0983304
0983446
0985237
18-6761
387277
393988
394176
582048
582155
584107
777784
777785
778247
8M6007522
8M6007523
8M6007543
8M6014150
802507
802507A1
802508
9-18102
984356
Manufacturer Item:
584107
Manufacturer:
MES Marine
Available:
In Stock
Your Price:
260.37
Each
Johnson/Evinrude 90-175hp 60° Carb Body Pn# 436797
Item#:
E2-1
Cross Reference#:
0340653
0344046
0778291
340653
344046
778291
Manufacturer Item:
344046
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
7.34
Each
Item#:
3929-1
Cross Reference#:
0390436
0392988
0765619
390436
392988
765619
Manufacturer Item:
392988
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
66.13
Each
Item#:
335134
Cross Reference#:
335134
Manufacturer Item:
335134
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
12.07
Each
Primer Valve Cover, Gasket and Fuel Primer Valve Repair Kit

Johnson and Evinrude Primer Solenoid Repair Kit

Pro Marine Primer Solenoid Repair Kit - 7044P

Pro Marine 7044P is a primer solenoid service and repair kit for a wide range of older Johnson and Evinrude outboard engines.

The kit replaces the commonly serviced components at the fuel primer solenoid including the primer cover, solenoid gasket and fuel primer valve.

Application data supplied for this kit covers numerous Johnson, Evinrude and OMC model-number families from 1980-1994, ranging from approximately 10 HP through 300 HP. Always verify the complete engine model number before ordering.

Pro Marine 7044P Primer Solenoid Kit

Application: Johnson / Evinrude Primer Solenoid
Engine Range: Select 10-300 HP Outboards
Years in Supplied Fitment: 1980-1994
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
Kit Type: Primer Solenoid Service / Repair Kit

OEM and Cross Reference Numbers

The 7044P primer-solenoid kit and its individual components are commonly searched under several Johnson, Evinrude, OMC and Sierra numbers.

Type Part Numbers
Sierra Kit Numbers 18-7044, 18-7044-1, 18-70441
Primer Cover / Service Kit References 0437228, 0511807, 0765567, 18-0993
Cover OEM Numbers 0341071, 341071, 0765635, 765635
Gasket OEM Numbers 0341297, 341297, 0778216, 778216
Fuel Primer Valve OEM Numbers 0175158, 175158, 0765749, 765749

What is Included

The Pro Marine 7044P kit contains the primary service components used to repair the valve end of the primer solenoid.

Qty Part Included Version OEM / Search Numbers
1 Primer Solenoid Gasket - 1297 Pro Marine 341297, 0341297, 0778216, 778216
1 Fuel Primer Valve - 175 EMP / Engineered Marine Parts 175158, 0175158, 0765749, 765749
1 Primer Solenoid Cover - 341P Pro Marine 341071, 0341071, 0765635, 765635

OEM Versions of the Individual Components

Prefer genuine Johnson / Evinrude / OMC components? Pro Marine also stocks OEM versions of the gasket and fuel primer valve.

Primer Gasket OEM OEM Primer Solenoid Gasket - 1297-1

Genuine OMC / Bombardier version of the primer solenoid gasket. OEM manufacturer number 341297.

View OEM Primer Solenoid Gasket
Primer Valve OEM OEM Fuel Primer Valve - 175-1

Genuine OMC / Bombardier fuel-primer valve. OEM manufacturer number 175158.

View OEM Fuel Primer Valve

How the Primer Solenoid Works

Many Johnson and Evinrude carbureted outboards use an electric primer solenoid instead of a traditional choke plate to provide additional fuel during cold starting.

When the primer is activated, fuel is directed through the primer system and into the engine's intake system to enrich the starting mixture.

The valve, cover and gasket at the end of the solenoid are common service points. Age, fuel exposure and repeated operation can eventually cause leakage, poor sealing or difficulty priming the engine.

Common Symptoms of a Primer Solenoid Problem

  • Hard cold starting
  • Engine does not receive enrichment when the primer is activated
  • Fuel leakage around the primer-solenoid cover
  • Fuel leaking from the manual primer valve
  • Cracked or distorted primer cover
  • Damaged or hardened solenoid gasket
  • Primer valve that no longer seals correctly
Repair the Service Components Instead of Replacing the Complete Solenoid

If the electrical portion of the primer solenoid is still functioning, many primer problems can be repaired by servicing the cover, gasket and primer valve rather than replacing the complete primer-solenoid assembly.

Inspect the complete primer assembly before ordering to confirm the solenoid body and electrical coil are still serviceable.

Johnson and Evinrude Fitment

The supplied application list for this primer-solenoid service kit contains 2,728 individual model/year entries covering Johnson, Evinrude and related OMC model designations.

Applications in the supplied fitment data range from 1980 through 1994 and from approximately 10 HP through 300 HP.

Horsepower Years Found in Supplied Fitment Fitment Notes
10 HP1990-1992Select Johnson / Evinrude models
15 HP1990-1992Select Johnson / Evinrude models
20 HP1985-1994Select electric-primer applications
25 HP1984-1994Multiple model families
28 HP1986-1994Multiple model families
30 HP1984-1994Multiple model families
35 HP1984-1988Select models
40 HP1984-1994Extensive model coverage
45 HP1989-1992Select models
48 HP1987-1994Select models
50 HP1983-1994Extensive model coverage
55 HP1989-1992Select models
60 HP1983-1994Multiple model families
65 HP1984-1994Select models
70 HP1983-1994Multiple model families
75 HP1983-1988Select models
85 HP1980-1994Select models
88 HP1987-1994Select models
90 HP1981-1994Extensive model coverage
100 HP1980-1994Multiple model families
110 HP1986-1989Select models
112 HP1994Select models
115 HP1980-1994Extensive model coverage
120 HP1986-1994Extensive model coverage
125 HP1989-1994Select models
140 HP1980-1994Extensive model coverage
150 HP1980-1994Extensive model coverage
155 HP1984-1992Select models
175 HP1980-1994Extensive model coverage
185 HP1984-1994Select models
200 HP1980-1994Extensive model coverage
225 HP1986-1994Extensive model coverage
235 HP1980-1985Select models
250 HP1991-1994Select models
275 HP1986-1988Select models
300 HP1986-1994Multiple model families
Important Fitment Note

The horsepower and year chart above summarizes the supplied application list. It does not mean that every Johnson or Evinrude engine of that horsepower and year uses this kit.

Match the complete engine model number and confirm that the engine uses this style of electric primer valve before ordering.

Why the OEM Numbers Matter

Older Johnson and Evinrude parts catalogs may show individual primer components instead of a complete repair kit. That is why searching the component OEM numbers can be especially useful when identifying this kit.

Common numbers associated with the components include:

  • 341071 / 0341071 - Primer Solenoid Cover
  • 341297 / 0341297 - Primer Solenoid Gasket
  • 175158 / 0175158 - Fuel Primer Valve
  • 0437228 - Primer Valve Cover and Gasket Service Assembly
  • 0511807 - Primer Solenoid Cover and Gasket Assembly
  • 0765567 - Primer Valve Service Reference
  • 18-0993 - Sierra Primer Valve Cover / Gasket Reference
  • 18-7044 / 18-7044-1 / 18-70441 - Sierra Service Valve Kit References

Key Features and Benefits

  • Primer solenoid repair kit for select Johnson and Evinrude outboards
  • Includes primer-solenoid cover
  • Includes primer-solenoid gasket
  • Includes fuel-primer valve
  • Pro Marine and EMP components included
  • Cross-references Sierra 18-7044 service-kit applications
  • Useful alternative to replacing the complete primer-solenoid assembly when the solenoid itself is still serviceable
  • Extensive supplied model coverage from 1980-1994
  • OEM versions of individual service components also available

FAQ

What is Pro Marine 7044P?
7044P is a primer-solenoid service kit containing the cover, gasket and fuel-primer valve used to repair the service end of many older Johnson and Evinrude electric primer assemblies.

What comes in the 7044P kit?
The kit includes one 341P primer-solenoid cover , one 1297 primer-solenoid gasket , and one 175 fuel-primer valve .

Does 7044P replace Sierra 18-7044?
The kit is used for the same primer-valve service application associated with Sierra 18-7044, 18-7044-1 and 18-70441.

What OEM number is the primer-solenoid gasket?
The gasket included in the kit corresponds to OEM 341297 / 0341297.

What OEM number is the fuel-primer valve?
The included fuel-primer valve corresponds to OEM 175158 / 0175158.

What OEM number is the primer-solenoid cover?
The Pro Marine cover corresponds to OEM 341071 / 0341071.

Do you stock OEM versions of the individual components?
Yes. Pro Marine stocks the OEM primer-solenoid gasket and the OEM fuel-primer valve .

Does this fit every Johnson or Evinrude from 1980-1994?
No. The supplied fitment contains a very large number of models from that period, but fitment must be verified by the complete model number and primer-solenoid design.

Can I use this kit if the primer solenoid itself is electrically bad?
This kit services the valve, cover and sealing components. If the solenoid coil or complete primer assembly has failed, the complete primer solenoid assembly may need replacement instead.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Part Numbers

7044P, 18-7044, 18-7044-1, 18-70441, 18-0993, 0437228, 437228, 0511807, 511807, 0765567, 765567, 341071, 0341071, 0765635, 765635, 341297, 0341297, 0778216, 778216, 175158, 0175158, 0765749, 765749

Searchable Terms

Johnson primer solenoid kit, Evinrude primer solenoid kit, Johnson primer valve repair kit, Evinrude primer valve repair kit, primer solenoid gasket, primer solenoid cover, fuel primer valve, Johnson enrichener valve kit, Evinrude enrichener repair kit, OMC primer solenoid repair kit, Sierra 18-7044 replacement

Item#:
7044P
Cross Reference#:
0437228
0511807
0765567
18-0993
18-7044
18-7044-1
18-70441
Manufacturer Item:
437228
Manufacturer:
Pro Marine
Available:
Out of Stock
20.9500
Your Price:
18.95
Each
Aftermarket Trim Cap & Seal Kit for E-Tec Inline 3 & V4

Trim System

EMP Trim Cap & Seal Kit - 8985P

High-quality EMP aftermarket Trim Cap & Seal Kit for BRP E-Tec Inline 3 and V4 outboards.

Replaces OEM numbers 0769114 and 5008985. Excellent solution for common trim leaks and pressure loss.

Compatible Applications

BRP / E-Tec Inline 3 & V4 outboards. Verify with your engine model and serial number.

Common E-Tec Trim Pump Issues

  • Fluid leaks around the trim cap — most common symptom of failed seals
  • Trim drifts down after raising — pressure loss due to bad seals
  • Pump runs but trim is slow or weak — air entering through worn seals
  • Noisy or continuously running pump — low fluid from leaks

Replacing the cap and seals with this kit often resolves these issues.

Installation Guide

Tools Needed: Socket set, torque wrench, gasket scraper, clean rags.

  1. Let engine cool. Support the outboard and relieve hydraulic pressure.
  2. Remove the old trim cap and clean the mating surface thoroughly.
  3. Install new seals and cap. Torque to factory specifications.
  4. Refill hydraulic fluid and bleed the system if needed.
  5. Test trim operation and check for leaks.

Refer to your BRP service manual for model-specific details.

Important Fitment Note

Always confirm compatibility using your engine serial number and existing part number before ordering.

OEM & Cross Reference Numbers

OEM (BRP / OMC) 0769114, 5008985
EMP Version 8985P

OEM Version

OEM BRP Trim Cap & Seal Kit

OEM Trim Cap & Seal Kit - 8985

Genuine BRP / OMC Trim Cap & Seal Kit.

View OEM Version →

What This Part Is Used For

This kit replaces the trim cap and seals on the hydraulic trim system of BRP E-Tec outboards.

Prevents hydraulic fluid leaks and restores smooth trim operation.

Key Features and Benefits

  • High-quality EMP aftermarket replacement
  • Direct fit for E-Tec Inline 3 & V4 models
  • Includes cap and complete seal set
  • Restores proper hydraulic trim function

FAQ

What engines does this fit?
BRP E-Tec Inline 3 and V4 outboards. Verify with serial number.

What is the difference between 8985 and 8985P?
8985 is the OEM BRP part. 8985P is the EMP aftermarket version.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Terms

EMP trim cap and seal kit, 8985P, E-Tec trim seals, 0769114, 5008985, BRP E-Tec cap kit

Searchable Part Numbers

8985P, 8985, 0769114, 5008985

Item#:
8985P
Manufacturer Item:
5008985
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
169.99
Each
Johnson/Evinrude New design metal
Item#:
5004610
Cross Reference#:
0395540
395540
5004610
5004610
Manufacturer Item:
5004610
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
85.95
Each
Evinrude E-Tec 150hp
Item#:
ET150PH
Manufacturer:
Johnson/Evinrude
Available:
In Stock
 
Heavy
Your Price:
4299.57
Each
OMC 150-175HP 60° 1992-1996
Item#:
PH150
Manufacturer:
OMC / Bombardier
Available:
In Stock
 
Heavy
Your Price:
3699.63
Each
Johnson/Evinrude Looper 200hp 93-97
Item#:
SUPERLOOPER
Available:
In Stock
 
Heavy
Your Price:
4100.00
Each
|◀ ◀ 1381 - 1392 of 2557 ▶ ▶|
View: