Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1501 - 1512 of 2557 ▶ ▶|
View:
Johnson/Evinrude 40-50hp
Item#:
2795
Cross Reference#:
0333725
0777599
18-0197
21648
333725
445-168
447-608
777599
878660
Manufacturer Item:
333725
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
37.67
Each
Johnson/Evinrude 40-50hp
Item#:
2794
Cross Reference#:
0332514
0777597
18-0196
21647
332514
445-170
777597
878659
Manufacturer Item:
332514
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
10.99
Each
Johnson/Evinrude 20-35hp
Item#:
2798
Cross Reference#:
010-280
0389613
0777376
18-1394
389613
777376
Manufacturer Item:
389613
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
35.99
Each
This item is discontinued
Johnson/Evinrude 40-300hp
Item#:
2788
Cross Reference#:
0313447
0777598
18-0193
18-0193
21641
313447
447-616
777598
878656
Manufacturer Item:
313447
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
17.49
Each
Item#:
14C75
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.25
Each
Johnson/Evinrude 40-140hp For 433
Item#:
2769
Cross Reference#:
010-281
010-281-02
0307828
0310433
0775443
0777366
18-1362
18-1362
22700
22700
307828
310433
433
67447
777366
88903
88903T
Manufacturer Item:
310433
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
46.35
Each
Johnson/Evinrude 40-50hp
Item#:
2735
Cross Reference#:
0319895
0777502
18-2287
22683
319895
444-302
777502
878798
Manufacturer Item:
319895
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
146.99
Each
Johnson/Evinrude 40-50hp 2cyl
Item#:
2736
Cross Reference#:
0332491
0777498
18-2308
22663
332491
777498
9-73514
Manufacturer Item:
332491
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
99.99
Each
Johnson/Evinrude 50-70hp
Item#:
2732
Cross Reference#:
0318303
0387143
0389964
0397338
0777501
0777503
18-2209
22673
318303
397338
777501
777503
802524
802528
802528A1
802528A2
802531
802531A1
802531A2
9-73504
Manufacturer Item:
318303
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
115.99
Each
Johnson/Evinrude 18-25hp 1968-1976
Item#:
2749
Cross Reference#:
376433
377528
Manufacturer Item:
377528
Manufacturer:
Engineered Marine Parts
Available:
Out of Stock
Your Price:
25.99
Each
This item is discontinued
J/E V6 60º Eagle & FFI
Item#:
419
Cross Reference#:
0335419
0346354
0769618
0778326
10-419
335419
346354
36560
769618
778326
Manufacturer Item:
335419
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.45
Each
Item#:
25C150
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.39
Each
|◀ ◀ 1501 - 1512 of 2557 ▶ ▶|
View: