S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Johnson, Evinrude & E-TEC Outboard Parts
Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Johnson, Evinrude & E-TEC Parts by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Find the Correct Johnson, Evinrude or E-TEC Part
Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Johnson, Evinrude & E-TEC Engine Families
Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.
- Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
- Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
- V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
- High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
- Ficht / FFI: direct-injection Johnson and Evinrude engine families
- E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges
Common Johnson & Evinrude Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
- No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
- Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?
- OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
- Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of older OMC-era parts and modern E-TEC service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Johnson or Evinrude outboard part?
Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.
Can I search Johnson and Evinrude parts by OEM part number?
Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Johnson and Evinrude parts vary by model and year?
Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.
Do you carry parts for Evinrude E-TEC engines?
Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.
Do you carry parts for older Johnson and Evinrude outboards?
Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.
What Johnson and Evinrude parts are commonly replaced during routine maintenance?
Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.
Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
0777848
18-0929
2205
313416
34260
3852120
777848
878993
38100-90J10
38100-93J00
38100-93J01
38100-93J02
38100-93J03
38100-93J04
38100-93J05
38100-96J00
38100-96J01
38100-96J10
38100-96J11
38100-96J12
5035113
5035513
DF60 1998-2000
DT65 1995-1997
DF70 1980-2000Â
DT75 1995-1997
DT85 1995-2000
DT115 1996-2001
DT140 1996-2001
Johnson 60-70hp 4Stroke
38100-99E01-0EP
5030828
5030829
5030830
5031166
0435532
0437801
0768723
18-6280
36120
36120-ZV5-821
435532
437801
6H5-43880-00-00
6H5-43880-09-00
768723
8M6007526
8M6014149
9-18105
0338780
0436726
0778253
436726
778253
0431929
Pro Marine Johnson and Evinrude Push-to-Choke Ignition Switch
Johnson Evinrude Ignition Switch with Safety Lanyard - 5801P
Pro Marine 5801P is an aftermarket replacement ignition key switch with push-to-choke function and safety lanyard for compatible Johnson and Evinrude outboards and remote-control systems.
This switch replaces Johnson / Evinrude / OMC / BRP numbers 5005801, 175974, 0175974, 765562 and 0765562.
Applications include select Johnson and Evinrude 2-stroke and 4-stroke engines, commercial models, portable engines and remote-control assemblies. Because this ignition switch is used across several engine families, verify the exact model or OEM number before ordering.
Part Type: Ignition / Key Switch with Safety Lanyard
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Ignition Type: Push-to-Choke
Application: Johnson / Evinrude Outboard and Remote Control
Manufacturer Reference: 5005801
Pro Marine Item #: 5801P
Compatible Applications
Pro Marine 5801P fits compatible Johnson and Evinrude outboard and remote-control applications using the 5005801 / 175974-style ignition switch.
General Engine Applications
| Engine Family | Application |
|---|---|
| Johnson / Evinrude 40 HP | 2-Cylinder 3.187 Bore Looper, 2-Stroke |
| Johnson / Evinrude 50 HP | 2-Cylinder 3.187 Bore Looper, 2-Stroke |
| Johnson / Evinrude 9.9 HP | 4-Stroke, 305cc, 1995-2001 |
| Johnson / Evinrude 15 HP | 4-Stroke, 305cc, 1995-2001 |
| Johnson / Evinrude 65 HP | 3-Cylinder 3.187 Bore Looper |
| Johnson / Evinrude 150 HP | 6-Cylinder 3.600 Bore 60-Degree Carb |
| Johnson / Evinrude 200 HP | 6-Cylinder 3.685 Big Bore Looper |
| 60-Degree V4 Models | Select Johnson / Evinrude applications |
Commercial Johnson and Evinrude Models
| Model | Description / Year |
|---|---|
| E150WPLSIF | Commercial, electric start, TNT, 20 in shaft - 2001 |
| E150WPLSSC | Commercial, electric start, TNT, 20 in shaft - 2000 |
| E200WPXEEN | 1999 |
| E200WPXEES | 1999 |
| E200WPXSIF | Commercial, electric start, TNT, 25 in shaft - 2001 |
| E200WPXSSC | Commercial, electric start, TNT, 25 in shaft - 2000 |
| E65WELSIR | Commercial, electric start, 20 in shaft - 2001 |
| E65WELSSC | Commercial, electric start, 20 in shaft - 2000 |
| J150WPLEES | 1999 |
| J150WPLSIF | Commercial, electric start, TNT, 20 in shaft - 2001 |
| J150WPLSSC | Commercial, electric start, TNT, 20 in shaft - 2000 |
| J200WPXEEN | 1999 |
| J200WPXEES | 1999 |
| J200WPXSIF | Commercial, electric start, TNT, 25 in shaft - 2001 |
| J200WPXSSC | Commercial, electric start, TNT, 25 in shaft - 2000 |
| J65WELSIR | Commercial, electric start, 20 in shaft - 2001 |
| J65WELSSC | Commercial, electric start, 20 in shaft - 2000 |
40 and 50 HP Model Applications
- J40PLSOC
- J40PLSRS
- J50PLSOC
- J50PLSRS
125, 150 and 200 HP Special Model Applications
| Family | Models |
|---|---|
| SE125 | SE125WTPLJ, SE125WTPLN, SE125WTPXJ, SE125WTPXN |
| SE150 | SE150WTPLB, SE150WTPLT, SE150WTPLT4, SE150WTPLY, SE150WTPXB, SE150WTPXT, SE150WTPXT4, SE150WTPXY |
| SE200 | SE200WTPLA, SE200WTPLG, SE200WTPLS, SE200WTPXA, SE200WTPXG, SE200WTPXS |
| SJ125 | SJ125WTPLJ, SJ125WTPLN, SJ125WTPXJ, SJ125WTPXN |
| SJ150 | SJ150WTPLB, SJ150WTPLT, SJ150WTPLT4, SJ150WTPLY, SJ150WTPXB, SJ150WTPXT, SJ150WTPXT4, SJ150WTPXY |
| SJ200 | SJ200WTPLA, SJ200WTPLG, SJ200WTPLS, SJ200WTPXA, SJ200WTPXG, SJ200WTPXS |
9.8, 10 and 15 HP Portable / Four-Stroke Applications
The supplied fitment also includes 9.8 Portable, 15 Portable and numerous 10 HP and 15 HP Johnson / Evinrude / Bombardier four-stroke model families.
| Series | Model Numbers |
|---|---|
| B10 Series | B10EGL4ABA, B10EGL4ABB, B10EGL4AFA, B10EL4AAA, B10EL4AAB, B10EL4AAC, B10PL4AAA, B10PL4AAB, B10PL4AAC, B10PX4AAA, B10PX4AAB, B10PX4AAC, B10R4AAA, B10R4AAB, B10R4AAC, B10RG4ABA, B10RG4ABB, B10RG4AFA, B10RGL4ABA, B10RGL4ABB, B10RGL4AFA, B10RL4AAA, B10RL4AAB, B10RL4AAC, B10TEL4AAA, B10TEL4AAB, B10TEL4AAC, B10TPL4AAA, B10TPL4AAB, B10TPL4AAC, B10TPX4AAA, B10TPX4AAB, B10TPX4AAC |
| B15 Series | B15PL4AAA, B15PL4AAB, B15PL4AAC, B15R4AAA, B15R4AAB, B15R4AAC, B15RG4ABA, B15RG4ABB, B15RGL4ABA, B15RGL4ABB, B15RL4AAA, B15RL4AAB, B15RL4AAC, B15TE4AAA, B15TE4AAB, B15TE4AAC, B15TEL4AAA, B15TEL4AAB, B15TEL4AAC |
| E10 Series | E10EL4AAA, E10EL4AAB, E10EL4AAC, E10PGL4ABA, E10PGL4ABB, E10PGL4AFA, E10PL4AAA, E10PL4AAB, E10PL4AAC, E10PX4AAA, E10PX4AAB, E10PX4AAC, E10R4AAA, E10R4AAB, E10R4AAC, E10RG4ABA, E10RG4ABB, E10RG4AFA, E10RGL4ABB, E10RGL4AFA, E10RGLABA, E10RL4AAA, E10RL4AAB, E10RL4AAC, E10TEL4AAA, E10TEL4AAB, E10TEL4AAC, E10TPL4AAA, E10TPL4AAB, E10TPL4AAC, E10TPL4ABA, E10TPL4ABB, E10TPL4AFA, E10TPX4AAA, E10TPX4AAB, E10TPX4AAC |
| E15 Series | E15PGL4ABA, E15PGL4ABB, E15PL4AAA, E15PL4AAB, E15PL4AAC, E15R4AAA, E15R4AAB, E15R4AAC, E15RG4ABA, E15RG4ABB, E15RGL4ABA, E15RGL4ABB, E15RL4AAA, E15RL4AAB, E15RL4AAC, E15TE4AAA, E15TE4AAB, E15TE4AAC, E15TEG4ABA, E15TEG4ABB, E15TEL4AAA, E15TEL4AAB, E15TEL4AAC |
Electrical and Remote Control Applications
- Electrical
- Electrical - 1995
- Electrical - 1996
- Electrical - 1997
- Electrical - 1998
- Electrical - 1999
- Electrical - 2000
- Remote Control - 1996
- Remote Controls - 1997
- Remote Controls - 1998
- Remote Controls - 1999
- Remote Controls - 2000
- Remote Controls and Cables
This switch fits many Johnson and Evinrude applications, but horsepower alone is not enough to confirm fitment.
Verify your exact model or confirm that the original switch crosses to one of these numbers:
5005801, 175974, 0175974, 765562 or 0765562.
OEM and Cross Reference Numbers
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 5801P |
| BRP / OMC | 5005801 |
| OMC / Johnson / Evinrude | 175974 |
| OMC / Johnson / Evinrude | 0175974 |
| OMC / Johnson / Evinrude | 765562 |
| OMC / Johnson / Evinrude | 0765562 |
Genuine OEM Version Available
Prefer the genuine factory version? Pro Marine USA also stocks the OMC / Bombardier OEM ignition switch for compatible applications.
Choose between the Pro Marine 5801P aftermarket switch and the OEM 5801 / 5005801 ignition switch.
View OEM 5801 Ignition SwitchPush-to-Choke Starting Function
Pro Marine 5801P uses the push-to-choke ignition-switch configuration found on compatible Johnson and Evinrude remote-control systems.
Turning the key operates the ignition and starter circuits, while pressing the key inward activates the choke or starting-enrichment circuit on compatible engines.
This allows normal starting and choke control through one ignition switch rather than requiring a separate choke button.
Safety Lanyard and Engine Cut-Off Function
The 5005801-style ignition-switch assembly incorporates the compatible engine cut-off safety lanyard system.
When properly connected, the lanyard allows the engine cut-off system to stop the engine if the operator is unexpectedly moved away from the helm.
After installing the replacement ignition switch, verify the OFF, RUN, START, push-to-choke and engine cut-off functions according to the applicable Johnson / Evinrude service procedure.
Do not operate the boat if the engine cut-off system does not function correctly.
What This Part is Used For
The ignition switch is the operator's main electrical control for the compatible Johnson or Evinrude outboard.
Depending on the application, the switch controls:
- Ignition power
- Engine starting
- Push-to-choke / starting enrichment
- Engine shutoff
- Emergency engine cut-off through the safety-lanyard system
Common Symptoms of a Worn Ignition Switch
- Engine does not crank when the key is turned
- Intermittent starter operation
- Engine power cuts in and out when the key is moved
- Push-to-choke function no longer operates correctly
- Loose or worn key movement
- Corroded terminals or damaged wiring
- Failed engine cut-off / safety-lanyard function
- Water or corrosion damage inside the remote control
Installation Tips
- Disconnect battery power before servicing the ignition circuit.
- Verify the existing OEM switch number before removing the original switch.
- Photograph or label each wire connection before disassembly.
- Inspect terminals and connectors for corrosion or heat damage.
- Compare the replacement switch wiring with the applicable service diagram.
- Route wiring away from moving throttle and shift components.
- Reconnect battery power only after the installation is complete.
- Test ignition, starting and push-to-choke operation.
- Verify the safety-lanyard engine cut-off function before operating the boat.
Key Features and Benefits
- Pro Marine Brand aftermarket replacement
- Push-to-choke ignition-switch design
- Designed for compatible Johnson and Evinrude remote controls
- Fits select Johnson / Evinrude 2-stroke applications
- Fits select Johnson / Evinrude 4-stroke applications
- Fits numerous commercial and special engine models
- Compatible with applicable safety-lanyard engine cut-off system
- Replaces BRP / OMC 5005801
- Replaces OMC 175974 / 0175974
- Replaces OMC 765562 / 0765562
- Genuine OEM version also available
FAQ
What does Pro Marine 5801P replace?
5801P replaces compatible Johnson / Evinrude / OMC / BRP ignition
switch numbers 5005801, 175974, 0175974, 765562 and
0765562.
Is 5801P a Pro Marine Brand part?
Yes. This listing is for the Pro Marine aftermarket replacement
ignition switch.
Is this a push-to-choke ignition switch?
Yes. The 5005801-style switch uses a
push-to-choke configuration on compatible Johnson and
Evinrude applications. :contentReference[oaicite:1]{index=1}
Does it fit 40 and 50 HP Johnson / Evinrude engines?
The supplied fitment includes select
40 and 50 HP 2-cylinder 3.187 bore looper applications.
Verify the model or OEM switch number before ordering.
Does it fit 9.9 and 15 HP four-stroke engines?
Yes. The supplied fitment includes select
9.9 and 15 HP 305cc four-stroke applications from 1995-2001,
plus the listed B10, B15, E10 and E15 model families.
Does this fit 150 and 200 HP engines?
The supplied fitment includes select 150 HP 60-degree V6 applications
and 200 HP big-bore looper applications, including the specific
commercial and special model numbers listed above.
Does this fit Johnson / Evinrude remote controls?
Yes. The supplied application data specifically includes remote-control
listings from 1996 through 2000, along with additional
remote-controls-and-cables applications.
Can I choose this switch by horsepower alone?
No. Johnson and Evinrude used this style of switch across multiple
engine and control families. Verify the exact model or OEM switch
number before ordering.
Do you also stock the genuine OEM version?
Yes. Pro Marine USA also stocks the
OEM 5801 / 5005801 Ignition Switch
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
5801P, 5005801, 175974, 0175974, 765562, 0765562
Searchable Terms
Pro Marine 5801P, Johnson ignition switch, Evinrude ignition switch, Johnson key switch, Evinrude key switch, OMC ignition switch, BRP ignition switch, Johnson push to choke switch, Evinrude push to choke switch, Johnson ignition switch with lanyard, Evinrude ignition switch with lanyard, Johnson remote control ignition switch, Evinrude remote control ignition switch, 5005801 ignition switch, 175974 ignition switch
0765562
175974
5005801
765562
F17556
F17563
F17563
F17564
F17568
F654541
PH200-T031
PT112N
TRM0012
172543
18-6762
382715
8M6007521
802509