Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1669 - 1680 of 2557 ▶ ▶|
View:
Johnson/Evinrude 45-140hp OMCString/Cobra w/ 1.125"Shaft
Item#:
27741
Cross Reference#:
0324037
0778329
27741
324037
778329
Manufacturer Item:
324037
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
23.78
Each
Johnson/Evinrude 90-300hp Cobra 4cyl V6 V8 92-93
Item#:
1343P
Cross Reference#:
0333957
0778455
18-1343
27850
333957
778455
Manufacturer Item:
333957
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
32.99
Each
Johnson/Evinrude 150-235hp '78 OMCStringer w/1 3/16"Propshaft
Item#:
2188
Cross Reference#:
0389041
0389866
0982407
0982416
18-2188
22415
802402
802402A1
982416
Manufacturer Item:
389041
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
314.26
Each
Johnson/Evinrude 90-115 V4 OMC Stringer/Cobra 5/8" Thick
Item#:
87084
Cross Reference#:
0127084
0318841
0323411
0384574
0777999
127084
18-4222
22230
318841
323411
384574
777999
802267
859915
Manufacturer Item:
127084
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
44.99
Each
Johnson/Evinrude 50-225hp 1987-1998 OMC Stringer/Cobra
Item#:
6024
Cross Reference#:
0392122
0393023
0436745
0777601
12776
18-6024
18-6024A
392122
393023
436745
777601
802470
802470T
Manufacturer Item:
436745
Manufacturer:
Tecno Seal
Available:
In Stock
Your Price:
9.00
Each
Johnson/Evinrude 120-225hp Cobra V6 V8 w/1 1/4"
Item#:
4467
Cross Reference#:
0434467
22950
Manufacturer Item:
434467
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
32.95
Each
Johnson/Evinrude 90-250hp OMCString/Cobraw/1 3/16&1 1/4"
Item#:
9455
Cross Reference#:
0389455
0769642
18-3767
18-3767
27700
27700
389455
769642
Manufacturer Item:
389455
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
179.99
Each
Johnson/Evinrude V4 V6
Item#:
7710
Cross Reference#:
0322941
0778465
27710
322941
778465
Manufacturer Item:
322941
Manufacturer:
GLM
Available:
Out of Stock
Your Price:
20.86
Each
This item is discontinued
Johnson/Evinrude 40-140hp OMCString/Cobra w/1.125" Shaft
Item#:
27702
Cross Reference#:
0389950
0391365
0436240
0778432
0984096
27702
389950
391365
436240
778432
984096
Manufacturer Item:
391365
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
179.99
Each
Upper and Lower Crankshaft Seal for Select Outboard and SportJet Engines
GENUINE MERCURY OEM REPLACEMENT PART

Genuine Mercury Upper and Lower Crankshaft Oil Seal - 41953-OE

The Genuine Mercury 41953-OE Upper and Lower Crankshaft Oil Seal is an OEM replacement seal used in select Mercury and Mariner outboard engines and Mercury SportJet applications.

This crankshaft oil seal is associated with numerous Mercury two-stroke outboard engine families, including select 30-125 HP inline engines, 135-200 HP V6 engines, 2.5L EFI models, and high-performance outboards. Additional Mercury catalog applications include SportJet 175, 200, 210, and 240 HP engines.

The supplied cross-reference list also includes numbers associated with Johnson and Evinrude replacement-part searches. Compatibility with those engines must be confirmed by their original part numbers and application diagrams.

Pro Marine USA also offers the Pro Marine 230 aftermarket crankshaft oil seal as an alternative for compatible applications.

Product Information

  • Item Number: 41953-OE
  • Manufacturer: Mercury Marine
  • Product Classification: Genuine Mercury OEM
  • Part Type: Crankshaft Oil Seal
  • Application: Upper or lower crankshaft sealing locations, depending on engine
  • Engine Types: Select Mercury and Mariner Outboards and Mercury SportJet Engines
  • Mercury Outboard Applications: Select 30-250 HP engine families
  • SportJet Applications: Select 175-240 HP models
  • Additional Cross-Reference Searches: Johnson and Evinrude
  • Aftermarket Alternative: Pro Marine 230

OEM and Cross Reference Numbers

The following OEM and aftermarket numbers are associated with this crankshaft oil seal. These references help customers locate replacement parts using original manufacturer numbers, older references, and aftermarket catalog numbers.

Part Number Reference
41953-OEGenuine Mercury OEM listing
41953Mercury reference
41953BMercury reference
0313992Cross reference
0764337Cross reference
0777914Cross reference
18-2016Aftermarket cross reference
20079Cross reference
25837Cross reference
29476Cross reference
313992Cross reference
336232Cross reference
508514Cross reference
764337Cross reference
775423Cross reference
777914Cross reference
9-76100Aftermarket cross reference

Cross-reference listings do not necessarily indicate that every listed number is an identical OEM part or a direct supersession. Confirm the required seal against the original engine application.

What This Part Is Used For

The crankshaft oil seal helps maintain an effective seal around the crankshaft where it passes through the engine crankcase.

In two-stroke outboard engines, proper crankcase sealing is important because the engine relies on controlled crankcase pressure changes during operation.

A damaged crankshaft seal can allow unwanted air leakage, potentially contributing to starting problems, unstable idle, poor acceleration, or improper engine operation.

This replacement seal may be used during:

  • Upper crankshaft seal replacement
  • Lower crankshaft seal replacement
  • Outboard powerhead rebuilding
  • Crankcase sealing repairs
  • Engine restoration and preventive service
  • Repair of crankshaft seal leaks

The exact location and quantity required depend on the engine's crankcase and crankshaft configuration.

Important Fitment Information

This crankshaft oil seal is not universal across all Mercury, Mariner, Johnson, or Evinrude engines.

Mercury used different crankshaft seals throughout multiple engine generations. The correct seal depends on the engine model, serial number, and crankshaft sealing location.

The following Mercury fitment information is based on the supplied application charts. Always verify the original part number using the appropriate engine parts diagram before ordering.

Mercury and Mariner Outboard Engine Fitment

This crankshaft oil seal appears in Mercury catalog application records covering select inline, V6, EFI, and high-performance outboard engines.

The tables below identify engine families and representative serial-number ranges from the supplied application charts. Regional serial-number systems may differ.

Mercury 30-60 HP Outboard Applications

Engine Model Serial Number Range Catalog
30 HP 2-Cylinder 0G760300-0T079999 USA 90-803018
40 HP 2-Cylinder 0G760300-0T079999 USA 90-803018
30 HP Jet 3-Cylinder 0G760300-0T408999 USA 90-803026
40 HP 3-Cylinder 0G760300-0T079999 USA 90-803026
50 HP 3-Cylinder 0G760300-0T079999 USA 90-803026
30 and 40 HP 2-Cylinder 0G055314-0G760299 USA 90-80874494
50 and 60 HP 3-Cylinder 6428681-0B122929 USA 90-13288

Mercury 65-125 HP Outboard Applications

Engine Model Serial Number Range Catalog
70, 75, 80 and 90 HP 3-Cylinder 0B240451-0C221999 USA 90-18520
75 and 90 HP 3-Cylinder 0C222000-0D283221 USA 90-81589890
65 Jet, 75 and 90 HP 3-Cylinder 0D283222-0G760299 USA 90-81589894
65 Jet, 75 and 90 HP 3-Cylinder 0G760300-0T979999 USA 90-803147
80 Jet, 100, 115 and 125 HP 0D283222-0G760299 USA 90-1779394
80 Jet, 100, 115 and 125 HP 0G760300-0T979999 USA 90-803168
100 and 115 HP 4-Cylinder 0A722297-0D283221 USA 90-17793

Mercury V6 135-200 HP Outboard Applications

The supplied application charts include select Mercury V135, V150, V175, V200, XR4, XR6, Magnum, Magnum II, Magnum III, Marathon, EFI, and 2.5L V6 configurations.

Engine Family Serial Number Range Catalog
V135, V150, XR4 and Magnum II 0A904646-0C100860 90-13752 / 90-18739
V135, V150, XR4, V175 and V200 0C100861-0C239552 90-814019 / 90-814115 / 90-814116
V135, V150, XR4 Magnum II, V175 and V200 0C239553-0D081999 90-81609890
V150 XR2, Magnum, Marathon and Work 4868998-0A904645 90-818855
V135, V150, XR6 Magnum III, V175 and V200 0G760300-0G960499 90-803170
V135, V150, XR6 Magnum III, V175 and V200 0D082000-0G303045 90-81609892
V135, V150, XR6 Magnum III, V175 and V200 0G303046-0G760299 90-81609896
V150, V175 and V200 0G960500-0T408999 90-80317700
V150, V175 and V200 0G760300-0G960499 90-803177

Mercury 2.5L V6 and EFI Applications

Engine Model Serial Number Range Catalog
135, 150 and 175 HP V6 2.5L 0G960500-0T178499 90-80350200
135, 150 and 175 HP V6 2.5L 0T178500-0T800999 90-80350201
135, 150 and 175 HP V6 2.5L 0T801000-1B226999 90-803502004
135, 150 and 175 HP V6 2.5L 1B227000-1B417701 90-803502006
135, 150 and 175 HP V6 2.5L 1B417702-1B580029 90-803502007
150 HP EFI 2.5L 0T409000-0T800999 90-80317702
150 and 200 HP 2.5L 0T801000-1B226999 90-803177004
150 and 200 HP 2.5L 1B227000-2B121048 90-803177006

Mercury High-Performance Outboard Applications

Engine Model Serial Number Range
150 HP Pro Max / Super Mag 0D935000-0G610079
200 HP EFI Pro Max / Super Mag 0D935000-0G610079
150/200 HP Pro Max / Super Mag 0G610050-0G856999
225 HP EFI Pro Max / Super Mag 0G857000-0T429939
225 HP EFI Pro Max / Super Mag 0G610104-0G856999
200 HP XS 6-Cylinder 2.5L 1E050852-1E053876

Mercury SportJet Engine Applications

The supplied Mercury application data includes SportJet engines listed under cylinder block, powerhead, and gasket-related catalog diagrams.

These records identify engine families in which the seal may appear in the associated parts catalog. Verify the seal location and original part number before ordering.

SportJet Engine Serial Number Range Catalog
175XR2 Jet Drive 0E369300-0E433153 90-804853R1
175XR2 Jet Drive 0E151580-0E369299 90-835085R2
200 DFI Jet Drive 1B321662-1B321669 90-8M0048139
200 DFI Jet Drive 0E435742-Present 90-8M0048139
200 DFI Jet Drive 0E384500-0E433151 90-881779
210 Carb M2 Jet Drive 0E373939-0E426999 90-804944R1
210 Carb Jet Drive 0E384500-0E433153 90-881770
240 EFI M2 Jet Drive 0E373939-0E384499 90-804945R1
240 EFI Jet Drive 0E384500-0E406399 90-881812
240 EFI M2 Jet Drive 0E406400-Present 90-885191

Johnson and Evinrude Cross-Reference Applications

This crankshaft oil seal is also associated with replacement-part searches for Johnson and Evinrude outboard engines.

The supplied cross-reference list includes:

  • 0313992 / 313992
  • 0764337 / 764337
  • 0777914 / 777914
  • 775423
  • 336232
  • 508514
Johnson and Evinrude Fitment Verification

Specific Johnson and Evinrude engine models, horsepower ranges, and years were not included in the supplied fitment charts. Match the original seal part number and confirm the application using the appropriate engine parts diagram before purchasing.

PRO MARINE AFTERMARKET ALTERNATIVE

Pro Marine 230 Upper and Lower Crankshaft Oil Seal

Looking for an aftermarket replacement? Pro Marine USA also offers Part Number 230, an alternative crankshaft oil seal for compatible Mercury, Johnson, and Evinrude applications.

Compare the original part number and engine fitment before selecting the OEM or aftermarket version.

View Pro Marine 230 Aftermarket Oil Seal

Common Reasons to Replace a Crankshaft Oil Seal

  • Crankshaft seal leakage
  • Crankcase air leaks
  • Hard starting or inconsistent engine operation
  • Unstable idle caused by a confirmed sealing problem
  • Seal damage discovered during powerhead disassembly
  • Crankshaft or crankcase service
  • Preventive replacement during engine rebuilding

These symptoms may also result from other engine problems. Proper diagnosis is recommended before replacing the crankshaft seal.

Installation and Service Tips

  • Confirm the original crankshaft oil seal part number.
  • Verify the correct engine model and serial-number range.
  • Identify whether the seal is required for the upper or lower crankshaft location.
  • Inspect the crankshaft sealing surface for wear or damage.
  • Remove the original seal carefully to avoid damaging surrounding components.
  • Install the replacement seal using the correct service procedure and tools.
  • Follow the manufacturer's specified seal orientation and installation depth.
  • Inspect related crankcase sealing components during reassembly.
  • Perform appropriate engine checks after completing the repair.

Crankshaft seal replacement may require specialized tools and engine disassembly. Consult the applicable Mercury service manual or a qualified marine technician.

Key Features and Benefits

  • Genuine Mercury OEM: Factory Mercury replacement component.
  • Crankshaft Sealing: Helps maintain proper sealing around the crankshaft.
  • Upper and Lower Applications: Referenced in crankshaft sealing locations depending on engine design.
  • Extensive Mercury Catalog Coverage: Listed across multiple Mercury outboard and SportJet engine families.
  • Cross-Reference Support: Multiple OEM and aftermarket numbers help identify compatible replacements.
  • Aftermarket Option: Pro Marine 230 is available separately.
  • Engine Rebuild Applications: Suitable for applicable crankcase and powerhead repairs.

Frequently Asked Questions

What is Mercury 41953-OE?

It is a genuine Mercury OEM crankshaft oil seal used in select Mercury and Mariner outboard engines and Mercury SportJet applications.

Does this crankshaft oil seal fit Johnson and Evinrude engines?

The supplied cross-reference list includes numbers associated with Johnson and Evinrude replacement-part searches. However, compatibility must be verified using the original engine part number and parts diagram.

What Mercury horsepower engines use this oil seal?

The supplied Mercury catalog records include select 30-125 HP inline outboards, 135-200 HP V6 models, and certain high-performance engines rated up to 250 HP. Fitment depends on the engine model and serial number.

Does this oil seal fit Mercury SportJet engines?

Yes, the supplied Mercury application charts include select 175XR2, 200 DFI, 210 Carb, and 240 EFI SportJet engine families. Verify the correct crankshaft seal location.

Can this seal be used in both upper and lower crankshaft positions?

This product is listed for upper and lower crankshaft oil seal applications. The correct location and quantity depend on the specific engine design.

Is this a genuine Mercury part or an aftermarket replacement?

This listing, 41953-OE, is for the genuine Mercury OEM version.

Is there a Pro Marine aftermarket version?

Yes. Pro Marine USA offers Pro Marine 230 Upper and Lower Crankshaft Oil Seal for compatible applications.

Can a worn crankshaft seal cause a poor idle?

Yes. A leaking crankshaft seal can affect crankcase sealing in a two-stroke engine, potentially contributing to poor idle or inconsistent running conditions.

Should crankshaft oil seals be replaced during an engine rebuild?

Crankshaft seals should be inspected during applicable engine rebuilding procedures. Replacement may be recommended when seals are worn, damaged, or disturbed during disassembly. Follow the engine manufacturer's service instructions.

How do I verify the correct crankshaft oil seal?

Use your engine model and serial number to locate the appropriate Mercury, Johnson, or Evinrude parts diagram. Confirm the original seal number and its position in the engine.

Dealer Discounts & Store Policies

Marine Dealer and Industry Discounts

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts to professional marine technicians, repair shops, boat dealers, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on orders over $100 within the continental United States.
  • Orders received before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping available through UPS, USPS, and FedEx.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need assistance identifying the correct crankshaft oil seal? Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

41953-OE, 41953, 41953B, 0313992, 0764337, 0777914, 18-2016, 20079, 25837, 29476, 313992, 336232, 508514, 764337, 775423, 777914, 9-76100, Pro Marine 230

Searchable Terms

Genuine Mercury crankshaft oil seal, Mercury 41953 crank seal, Mercury upper crankshaft seal, Mercury lower crankshaft seal, Johnson crankshaft oil seal, Evinrude crankshaft oil seal, Johnson Evinrude upper crank seal, Johnson Evinrude lower crank seal, Mercury Mariner outboard oil seal, Mercury 2 stroke crankshaft seal, Mercury 2.5L V6 crankshaft seal, Mercury 150 HP crankshaft seal, Mercury 175 HP crankshaft seal, Mercury 200 HP crankshaft seal, Mercury SportJet crankshaft seal, Mercury powerhead oil seal, outboard crankcase seal, Pro Marine 230 crankshaft seal

Item#:
41953-OE
Cross Reference#:
0313992
0764337
0777914
18-2016
20079
25837
29476
313992
336232
41953
41953B
508514
764337
775423
777914
9-76100
Manufacturer Item:
41953
Manufacturer:
Mercury Marine
Available:
In Stock
17.4900
Your Price:
14.72
Each
Johnson/Evinrude Mercury 3.0L
Item#:
050
Cross Reference#:
0320499
0352960
0387041
0769405
0777367
18-1347
18-1377
18-1377
22855
320499
352960
387041
5007190
777367
878758
878780
88269
88269T
88270
88270A02
88270A1
883270T
Manufacturer Item:
320499
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
89.99
Each
Item#:
SP1
Cross Reference#:
F184122-1
0302621
0303328
0305118
0305150
0309044
0313409
0313892
18-2534
302621
303328
305118
305150
309044
313409
313892
Manufacturer Item:
309044
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.89
Length
|◀ ◀ 1669 - 1680 of 2557 ▶ ▶|
View: