Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1777 - 1788 of 2557 ▶ ▶|
View:
J/E 2Cyl Bore 3.00 OD 3.125" Chrysler/Force 2cyl
Item#:
T30
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
91.20
Each
J/E 2cyl Bore 3.00 OD3.125 Chrysler Force 2cyl
Item#:
1011SA
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
74.85
Each
J/E 2cyl Bore 3.00 OD 3.188 Chrysler / Force
Item#:
1011SB
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
66.55
Each
J/E V4 Bore 3 3/8 Chrysler/Force 3-5Cyl OD 3 1/2
Item#:
T70
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
91.20
Each
J/E 2cyl Bore 3.00 OD 3.25 Chrysler / Force 2CYL
Item#:
1011SC
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
74.85
Each
J/E 4Cyl Bore 3.375 Chrysler/Force 4Cyl OD 3.500
Item#:
1049FA
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
96.50
Each
J/E 4Cyl Bore 3.375 Chrysler/Force 3-5Cyl OD 3.500
Item#:
1049SA
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
128.29
Each
J/E 4Cyl Bore 3.375 Chrysler/Force 3-5Cyl OD 3.625
Item#:
1049SC
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
128.29
Each
J/E 4Cyl Bore 3.375 Chrysler/Force 3-5Cyl OD 3.563
Item#:
1049SB
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
128.29
Each
J/E = Trim / Volvo = Fuel Pump Force Trim 3-6Cyl 82 & Later
Item#:
1561
Cross Reference#:
0511864
0582195
0582472
0582473
0584416
0586147
0586224
0777702
18-5700
18-5705
3850403
3852259
3857533
3858081
3858809
460042
511864
582195
582472
582473
584416
586147
586224
73010
777702
8M0057697
8M0219829
802370
803477
879058
9-15200
Manufacturer Item:
584416
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
12.05
Each
J/E 2Cyl X-Flow Bore 3 3/16 Chrysler/Force OD 3 7/16
Item#:
L603
Manufacturer:
La Sleeves
Available:
Out of Stock
Your Price:
93.48
Each
J/E 2Cyl X-Flow Bore 3.00 Chrysler/Force 2Cyl O/D 3 1/4
Item#:
L30
Manufacturer:
La Sleeves
Available:
Out of Stock
Your Price:
91.20
Each
|◀ ◀ 1777 - 1788 of 2557 ▶ ▶|
View: