Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1813 - 1824 of 2557 ▶ ▶|
View:
Mercury 50-70 SportJet 90-120 Johnson/Evinrude 88-235 Chrysler/Force 40-150
Item#:
207
Cross Reference#:
FA284659
FFF000068
F284659
F284659-1
F284659-2
F2846591
F2846592
F691659
0385503
0777369
18-1395
30-F284659-2
385503
54816
64424
64424T
777369
803893T
9-51106
Manufacturer Item:
64424
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.38
Each
Johnson Evinrude 85-140hp V4 Mercury 35-50hp
Item#:
SR372
Cross Reference#:
0328381
0384778
0385844
0585266
385667
57385
57389
Manufacturer Item:
385667
Manufacturer:
Arco
Available:
In Stock
Your Price:
39.69
Each
Johnson/Evinrude 40-140hp Mercury & Chrysler Force
Item#:
433-1
Cross Reference#:
0378252
18-1352
22800
378252
67445
Manufacturer Item:
378252
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.54
Each
Johnson/Evinrude/OMC 1" Shaft Dia. 1.375" OD .25"W
Item#:
18-2060
Cross Reference#:
0303804
0321467
0777527
303804
321467
777527
86060
9-76206
Manufacturer Item:
321467
Manufacturer:
Sierra
Available:
In Stock
Your Price:
18.49
Each
Johnson/Evinrude OMC Stringer/Cobra
Item#:
0957
Cross Reference#:
F50556
F50556
F8077
F8077
F8186
0311598
0777517
18-2945
19183
19183B
19183K02
19183Q02
191832
191832
191833
20260
20260B
311598
31170
3852105
3852105
777517
8M0187157
802025
802025A1
9-60101
Manufacturer Item:
311598
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
10.39
10 PACK
Johnson/Evinrude V4 V6 OMC Stringer/Cobra
Item#:
02593
Cross Reference#:
0318544
0777603
0912624
18-2378
18-2378
21731
318544
318544
445-180
777603
878808
9-72654
912624
912624
Manufacturer Item:
318544
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
13.49
Each
Johnson/Evinrude OMC Stringer/Cobra
Item#:
02589
Cross Reference#:
0027283
027283
027283
0307551
0777602
0912625
0982851
18-2387
18-2387
18-4255
22380
307551
445-132
777602
878811
912625
982851
Manufacturer Item:
307551
Manufacturer:
Sierra
Available:
In Stock
Your Price:
10.39
Each
Johnson Evinrude 20hp Mercury 20hp Polaris MSX 140
Item#:
205
Cross Reference#:
0330854
0386482
0777377
0986172
18-1391
18-1391
20464
21840
330854
386482
49313
54215
63326
63326T
777377
9-51105
93306-205U7-00
986172
986172
Manufacturer Item:
330854
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
16.75
Each
Replacement Power Trim & Tilt Cap Assembly with Seals for Select Showa Hydr

Power Trim & Tilt Cap with Seals

Replacement Tilt Cap Assembly for Select Yamaha, Suzuki & OMC Showa Trim Systems

This replacement tilt cap with seals assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.

The tilt cap assembly helps seal the hydraulic trim cylinder while supporting proper trim piston movement, hydraulic pressure retention, and reliable trim and tilt operation.

Compatible Applications

Brand Model Range Years System
Yamaha 115HP 1997-2007 Showa Power Trim & Tilt
Yamaha 115HP FourStroke 2000-2007 Showa Power Trim & Tilt
Yamaha 130HP 1997-2004 Showa Power Trim & Tilt
Yamaha 150HP 1997-2007 Showa Power Trim & Tilt
Yamaha 150HP FourStroke 2004-2007 Showa Power Trim & Tilt
Yamaha 175HP 1997-2007 Showa Power Trim & Tilt
Yamaha 200HP 1997-2005 Showa Power Trim & Tilt
Yamaha 225HP 1997-2007 Showa Power Trim & Tilt
Yamaha 250HP 2003-2007 Showa Power Trim & Tilt
Yamaha 300HP 2004-2007 Showa Power Trim & Tilt
Suzuki DF115 2015-2024 Showa Power Trim & Tilt
Suzuki DF140 2002-2021 Showa Power Trim & Tilt
Suzuki DF150 2006-2023 Showa Power Trim & Tilt
Suzuki DF175 2006-2023 Showa Power Trim & Tilt
Suzuki DF200 2015-2024 Showa Power Trim & Tilt
Johnson / Evinrude 70-235HP 1978-1983 Showa Power Trim & Tilt
Johnson / Evinrude 140HP FourStroke 2003-2006 Showa Power Trim & Tilt
Fitment Note: This replacement trim cap assembly fits select outboards using compatible Showa hydraulic power trim and tilt systems.

Because manufacturers used multiple trim system variations depending on model and production range, always verify your engine model, serial number, and trim cylinder diagram before ordering.

OEM Part Numbers & Cross References

Brand OEM Part Number
Yamaha 63P-43810-00-00
Yamaha 63P-43810-09-00
Yamaha 64E-43810-00-00
Yamaha 64E-43810-09-00
Yamaha 64E-43811-01-00
Yamaha 64E-43811-02-00
Suzuki 48401-92J00
Suzuki 48401-92J01
Suzuki 48401-96J00
Suzuki 48401-96J01
Suzuki 48401-96J02
Johnson / Evinrude 5033932
Johnson / Evinrude 390006
Johnson / Evinrude 768745

What This Tilt Cap Assembly is Used For

This trim cap assembly is used in compatible hydraulic power trim and tilt systems to support the trim piston and help maintain proper hydraulic sealing.

The cap and seal assembly helps retain hydraulic pressure while allowing smooth piston movement during trim and tilt operation.

Worn or damaged trim caps and seals may cause hydraulic leaks, weak trim performance, erratic movement, or difficulty holding trim position.

Replacing worn hydraulic trim seals and cap components can help restore proper trim operation and reduce hydraulic fluid leakage.

Key Features and Benefits

  • Replacement tilt cap assembly with seals
  • Fits select Yamaha, Suzuki, Johnson, and Evinrude outboards
  • Compatible with Showa hydraulic trim systems
  • Helps maintain hydraulic trim pressure
  • Supports proper trim piston operation
  • Helps reduce hydraulic fluid leakage
  • Common repair item during trim cylinder service
  • Sold individually

Trim Cap Assembly Details

  • Part Type: Tilt Cap with Seals
  • Application: Hydraulic Power Trim & Tilt Systems
  • System Type: Showa Hydraulic Trim System
  • Fits Brands: Yamaha, Suzuki, Johnson, Evinrude
  • Use: Trim cylinder sealing and piston support
  • Quantity Sold: Each

FAQ

What does this trim cap fit?
This trim cap assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.

Does this include seals?
Yes. This assembly includes the cap and sealing components used in compatible hydraulic trim systems.

Can a bad trim cap cause hydraulic leaks?
Yes. Damaged cap seals can allow hydraulic fluid leakage and may affect trim and tilt performance.

Should I verify my trim assembly before ordering?
Yes. Manufacturers used several trim system variations depending on model and serial range, so diagram verification is recommended.

Is this used on Showa trim systems?
Yes. This part is designed for compatible Showa-style hydraulic trim and tilt assemblies used across multiple marine brands.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Hydraulic trim components should be installed only after confirming correct fitment.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

63P438, tilt cap with seals, Yamaha trim cap, Suzuki trim cap, Johnson trim cap, Evinrude trim cap, Showa trim cap, hydraulic trim cap, power trim seal cap, Yamaha 63P-43810-00-00, Yamaha 64E-43810-00-00, Suzuki 48401-96J02, Suzuki 48401-92J01, Johnson 5033932, Evinrude 390006, OMC 768745, hydraulic trim seal assembly, trim cylinder cap assembly

Item#:
63P438
Cross Reference#:
390006
48401-92J00
48401-92J00
48401-92J01
48401-96J00
48401-96J01
48401-96J02
5033932
63P-43810-00-00
63P-43810-09-00
64E-43810-00-00
64E-43810-09-00
64E-43811-01-00
64E-43811-02-00
Manufacturer Item:
63P-43810-00-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
101.95
Each
Yamaha 115-300hp Honda Showa Suzuki DF60-DF200 Showa 3 Ram
Item#:
64E43821
Cross Reference#:
04602-ZY3-000
48630-92J00
48630-94900
48630-96J01
48630-96J02
48630-96J03
48630-96J04
5030870
5033935
56115-ZW1-702
64E-43820-00-00
64E-43820-08-00
64E-43820-09-00
64E-43821-00-00
64E-43821-01-00
64E-43821-02-00
64E-43821-03-00
64E-43821-04-00
64E-43821-05-00
64E-43821-08-00
64E-43821-09-00
Manufacturer Item:
64E-43821-09-00
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
73.44
Each
Tecno Seal Replacement Engine Anode for Suzuki, Honda, Tohatsu and BRP

Replacement Outboard Zinc Anode

55321-87J10P Zinc Anode for Suzuki, Honda, Tohatsu and Johnson / Evinrude

The 55321-87J10P zinc anode is a replacement sacrificial anode used across a wide range of Suzuki DF outboards and select Honda, Tohatsu, Johnson and Evinrude applications.

It cross-references several OEM anode numbers including 55321-87J00, 55321-87J01, 12155-ZV5-000, 12155-ZV5-010, 5031705, 0778299 and related references.

55321-87J10P

Part Type: Sacrificial Zinc Anode
OEM or Aftermarket: Aftermarket
Primary Application: Suzuki DF Four-Stroke Outboards
Additional Applications: Honda, Tohatsu, Johnson and Evinrude
Item #: 55321-87J10P

OEM and Cross Reference Numbers

Part Number Brand / Reference
55321-87J00 Suzuki OEM Reference
55321-87J01 Suzuki OEM Reference
12155-ZV5-000 Honda OEM Reference
12155-ZV5-010 Honda OEM Reference
HZV5-12155-000 Cross Reference
HZV512155000 Cross Reference
5031705 Johnson / Evinrude Reference
0778299 Johnson / Evinrude Reference
778299 Johnson / Evinrude Reference

What This Part is Used For

This zinc anode is part of the corrosion-protection system used on compatible outboard engines. The sacrificial anode is designed to deteriorate in place of more expensive metal engine components exposed to water and the marine environment.

Anodes should be inspected during routine maintenance and replaced when they become substantially deteriorated. The number of 55321-87J10P-style anodes installed on an engine varies by model.

Important Fitment and Quantity Note

This anode appears across many different outboard models, years and serial-number ranges. The quantity required also varies by engine.

Verify the exact engine model and serial number before ordering the quantity needed for a complete anode service.

Suzuki Outboard Fitment

Supplied application data includes Suzuki DF engines ranging from small portable outboards through DF350A models. Applicable sub-models and serial ranges vary.

Engine Family Included Suzuki Applications
DF2.5-DF20 DF2.5, DF4, DF4A, DF5A, DF6, DF6A, DF8A, DF9.9, DF9.9A, DF9.9B, DF15, DF15A and DF20A families
DF25-DF60 DF25, DF25A, DF30, DF30A, DF40, DF40A, DF50, DF50A, DF60 and DF60A families including applicable Q, R, T, TH, QH, TL, VT and related variants
DF70-DF100 DF70, DF70A, DF75, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C families
DF115-DF140 DF115, DF115A, DF115B, DF115BG, DF115BS, DF115BSS, DF115BT, DF115BZ, DF115BZG, DF140, DF140A, DF140B, DF140BG, DF140BT, DF140BZ and DF140BZG
DF150-DF200 DF150, DF150AP, DF150AS, DF150AT, DF150AZ, DF175, DF175AP, DF175AT, DF175AZ, DF200, DF200A, DF200AP, DF200AST, DF200AT, DF200AZ, DF200T and DF200Z
DF225-DF300 DF225, DF225T, DF225Z, DF250, DF250A, DF250AP, DF250ST, DF250T, DF250Z, DF300, DF300A, DF300AP and DF300B families
DF325-DF350 DF325A and DF350A families including applicable MD variants

Honda Outboard Fitment

The supplied application data includes a broad range of Honda marine engines. Honda fitment is model and VIN specific, so the engine family alone should not be used as the only fitment check.

Honda Family Included Models / VIN Families
BF25 BF25A, BF25A1, BF25A2, BF25A3, BF25AW, BF25AX, BF25AY, BF25D4, BF25D5, BF25D6, BF25DK0, BF25DK2 and BF25DK3. Supplied VIN families include BAJL, BAJS, BAJU and BATJ.
BF30 BF30A, BF30A1, BF30A2, BF30A3, BF30AW, BF30AX, BF30AY, BF30D4, BF30D5, BF30D6, BF30DK0, BF30DK2 and BF30DK3. Supplied VIN families include BAWL, BAWS and BAUJ.
BF35 / BF40 / BF45 BF35AM, BF40A, BF40A1-A6, BF40AK0, BF40AW, BF40AX, BF40AY, BF40D, BF40DK2, BF40DK4 and BF45AM.
BF50 / BF60 / BFP60 BF50A, BF50A1-A6, BF50AK0, BF50AW, BF50AX, BF50AY, BF50D, BF50DK2, BF50DK4, BF60A, BF60AK1, BFP60A and BFP60AK1.
BF75 / BF90 BF75A1-A6, BF75AT, BF75AW, BF75AX, BF75AY, BF75DK0, BF75DK2-DK4, BF90A1-A6, BF90AT, BF90AW, BF90AX, BF90AY and BF90DK0-DK5.
BF100 / BF115 BF100A, BF100AK1, BF115AX, BF115AY, BF115A1-A6, BF115AK0, BF115D, BF115DK1 and BF115J. Supplied VIN families include BBMJ, BZBD, BZBG, BBHJ and BBWJ.
BF130 / BF135 / BF140 BF130AX, BF130AY, BF130A1-A4, BF135A4-A6, BF135AK0, BF135AK2 and BF140A.
BF150 / BF175 BF150A4-A6, BF150AK0, BF150AK2, BF150D, BF175AK1 and BF175AK2.
BF200 BF200A2-A6, BF200AK0-AK3 and BF200D. Supplied VIN families include BAEJ, BAFJ and BBRJ.
BF225 BF225A2-A6, BF225AK0-AK3 and BF225D. Supplied VIN families include BAGJ, BAHJ and BBPJ.
BF250 BF250A and BF250D families including L, X, XX, U and counter-rotation variants. Supplied VIN families include BBJJ and BBNJ.
Honda Fitment is VIN Specific

The attached application data contains specific Honda VIN ranges for many models. Match the model and VIN to the correct application before ordering rather than assuming all engines of the same horsepower use this anode.

Tohatsu Outboard Fitment

The following Tohatsu horsepower and year applications were supplied for this anode:

Horsepower Years Listed
60 HP 2014-2019
75 HP 2014-2019
90 HP 2014-2019
115 HP 2014-2019
150 HP 2014-2019 and select 2021-2025 applications
200 HP 2014-2019 and 2021-2025
225 HP 2014-2019 and 2021-2025
250 HP 2014-2019 and 2021-2025

Johnson and Evinrude Outboard Fitment

The supplied fitment includes numerous Suzuki-built Johnson and Evinrude four-stroke engines. Common application groups are shown below.

HP Family Included Model Families
2-6 HP Select J2, J4, J5 and J6 four-stroke models including R and RL variants.
25-30 HP E25, E30, J25, J30 and BJ25 families including electric-start, rope-start, tiller, remote and power-trim variants.
40-70 HP E40, E50, E70, J40, J50, J60, J70 and corresponding BJ40-BJ70 four-stroke families.
90 HP J90 and BJ90 PL / PX four-stroke families including SDA, SOR, SRC and STS variants.
115 HP J115 and BJ115 L / PL / PX / X four-stroke model families.
140 HP J140 and BJ140 CX / L / PL / PX / X four-stroke model families.
200 HP J200 and BJ200 CX / PX / X four-stroke model families.
225 HP J225 and BJ225 CX / PX / X / Z four-stroke model families.
Johnson / Evinrude Fitment Note

Fitment is based on specific four-stroke model numbers in the supplied application data. Verify the complete engine model number before ordering.

Related Anode Cover O-Rings

When servicing an internal engine anode, inspect the associated anode-cover O-ring. The O-ring should be replaced if it is cut, hardened, flattened, stretched or damaged.

Pro Marine 22019 Anode Cover O-Ring

Pro Marine 22019 is the aftermarket replacement for Suzuki 09280-22019 and is a convenient option when replacing internal anodes during routine service.

View Pro Marine 22019 O-Ring

Suzuki OEM 09280-22019 Anode Cover O-Ring

Prefer a genuine Suzuki sealing component? The OEM 09280-22019 anode cover O-ring is also available separately.

View OEM Suzuki 09280-22019

Installation and Service Tips

  • Inspect sacrificial engine anodes during scheduled or annual maintenance.
  • Replace heavily deteriorated anodes before they are completely consumed.
  • Inspect the associated O-ring whenever an anode cover is removed.
  • Replace damaged, hardened, flattened or stretched O-rings.
  • Confirm how many anodes are required for your specific engine.
  • Use the complete engine model and serial or VIN when checking fitment.
  • Follow the manufacturer's service procedure when reinstalling anode covers and fasteners.

Key Features and Benefits

  • Multi-Brand Application: Fits specified Suzuki, Honda, Tohatsu, Johnson and Evinrude outboards.
  • Suzuki Cross Reference: Replaces 55321-87J00 and 55321-87J01 applications.
  • Honda Cross Reference: Cross-references 12155-ZV5-000 and 12155-ZV5-010.
  • BRP Cross Reference: Cross-references select 5031705 and 0778299 applications.
  • Corrosion Protection: Sacrificial zinc helps protect compatible metal components from galvanic corrosion.
  • Service O-Rings Available: Both OEM Suzuki and Pro Marine anode-cover O-rings are available separately.

FAQ

What does 55321-87J10P replace?
It cross-references Suzuki 55321-87J00 and 55321-87J01, Honda 12155-ZV5-000 and 12155-ZV5-010, Johnson / Evinrude 5031705 and 0778299, along with additional supplied cross references.

What Suzuki outboards does this anode fit?
The supplied application data includes Suzuki models ranging from DF2.5 through DF350A. Exact sub-model and serial fitment varies, so verify the full engine model before ordering.

Does this fit Honda outboards?
Yes. The supplied application data includes many Honda families from BF25 through BF250, including specific model and VIN ranges.

Does this fit Tohatsu outboards?
Yes. Supplied fitment includes select Tohatsu 60, 75, 90, 115, 150, 200, 225 and 250 HP applications. Year coverage varies by horsepower.

Does this fit Johnson and Evinrude outboards?
Yes. The supplied fitment includes numerous Suzuki-built Johnson and Evinrude four-stroke applications from small portable models through 225 HP.

How many zinc anodes does my engine require?
The quantity varies by engine model. Some engines use multiple 55321-87J10P-style anodes, so check the engine diagram or service information before selecting a quantity.

Should I replace the O-ring when changing the anode?
Inspect the O-ring whenever the anode cover is removed. Replace it if it is damaged, flattened, hardened or otherwise unsuitable for reuse.

Is an OEM Suzuki O-ring available?
Yes. Suzuki 09280-22019 is available separately. Pro Marine 22019 is also available as an aftermarket alternative.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 in the continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns are accepted within 30 days.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help confirming fitment or determining how many anodes your engine requires? Contact Pro Marine USA or call 941-721-3000.


Searchable Part Numbers

55321-87J10P, 55321-87J00, 55321-87J01, HZV5-12155-000, HZV512155000, 12155-ZV5-000, 12155-ZV5-010, 5031705, 0778299, 778299

Searchable Terms

Suzuki zinc anode, Suzuki DF anode, Suzuki DF115 anode, Suzuki DF140 anode, Suzuki DF150 anode, Suzuki DF200 anode, Suzuki DF250 anode, Suzuki DF300 anode, Suzuki DF350 anode, Honda outboard zinc anode, Honda 12155-ZV5-000, Honda BF90 anode, Honda BF115 anode, Honda BF150 anode, Honda BF225 anode, Honda BF250 anode, Tohatsu zinc anode, Tohatsu 150 anode, Tohatsu 200 anode, Tohatsu 225 anode, Tohatsu 250 anode, Johnson four stroke anode, Evinrude four stroke anode, 5031705 anode, 0778299 anode, outboard sacrificial zinc anode

Item#:
55321-87J10P
Cross Reference#:
HZV5-12155-000
HZV5-12155-010
HZV512155000
HZV512155010
0778299
12155-ZV5-000
5031705
55321-87J00
55321-87J01
778299
Manufacturer Item:
55321-87J01
Manufacturer:
Tecno Seal
Available:
In Stock
Your Price:
4.82
Each
Johnson/Evinrude Nissan / Tohatsu
Item#:
VTT-BST
Cross Reference#:
0317789
0319787
0769242
317789
319787
769242
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
14.99
Each
|◀ ◀ 1813 - 1824 of 2557 ▶ ▶|
View: