Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1861 - 1872 of 2557 ▶ ▶|
View:
Bore Size 2.785
Item#:
2785KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
37.00
Each
Bore Size 3.312
Item#:
3312KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 3.494
Item#:
3494KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.559"
Item#:
2559CD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
30cc Tilt Hydraulic Steering Helm Pump for Pro Marine, SeaStar & Uflex Styl

30cc Tilt Hydraulic Steering Helm Pump

Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump

The Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump is a 30cc tilt hydraulic steering helm designed for smooth, responsive steering control while allowing adjustable steering wheel positioning for improved driver comfort.

This Pro Marine tilt helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

What a 30cc Tilt Helm Pump Does

The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.

A 30cc tilt helm moves more fluid per steering wheel turn than smaller helms while also allowing the steering wheel angle to be adjusted for improved comfort and driving position.

Pro Tip: Tilt helms are popular on center consoles, bay boats, and performance boats where the driver wants adjustable steering wheel positioning for standing or seated operation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Single Outboards up to 350HP Hydraulic steering helm applications requiring adjustable tilt positioning
Center Console Boats Improved comfort for seated and standing driving positions
Bay Boats Responsive steering with adjustable helm angle
Offshore Boats Comfortable steering position for long-distance operation
Performance Setups Useful where responsive steering and driver comfort are important

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Steering Cylinder

Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.

View 350-HSTEER-CYL Cylinder

Hydraulic Hoses

Choose the correct hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Fluid & Fill Accessories

Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.

View PRO-OIL15 Hydraulic Fluid
View 102P Fill Hose Assembly

Key Features and Benefits

  • 30cc tilt hydraulic helm pump design
  • 1.83 cubic inches per revolution hydraulic displacement
  • Adjustable tilt steering position for improved comfort
  • Can provide quicker steering response when properly matched
  • Designed for the Pro Marine 350-HSTEER hydraulic steering system
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Good choice for center consoles and performance boats
  • Helps reduce steering effort compared to cable steering

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Tilt hydraulic helm pump
  • Helm Size: 30cc
  • Displacement: 1.83 cu in/rev
  • Connection Type: Hydraulic steering hose circuit
  • Tilt Feature: Adjustable steering wheel angle
  • Typical Use: Single outboard hydraulic steering systems
  • Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
  • Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit

FAQ

What does a tilt hydraulic helm do?
A tilt helm allows the steering wheel angle to be adjusted while also providing hydraulic steering control for the outboard engine.

What is the advantage of a tilt helm?
Tilt helms improve driver comfort by allowing the wheel position to be adjusted for seated or standing operation.

What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

Is this the complete steering system?
No. This listing is for the tilt helm pump only.

Can this helm be used on center console boats?
Yes. Tilt helms are especially popular on center console boats where adjustable steering wheel positioning improves comfort and visibility.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-THELM-030, tilt hydraulic helm pump, 30cc tilt helm, Pro Marine tilt helm, 1.83 cu in helm pump, SeaStar compatible tilt helm, Uflex compatible tilt helm, hydraulic steering tilt helm, adjustable tilt steering helm, outboard steering helm, 350-HSTEER tilt helm

Item#:
350-THELM-030
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
877.20
Each
Bore Size 3.685
Item#:
3685KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
52.95
Each
Bore Size 2.786
Item#:
2786CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 2.618
Item#:
2618CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.268
Item#:
3268KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.605
Item#:
2605KD
Manufacturer:
Wiseco
Available:
Special Order
Your Price:
39.63
Each
Bore Size 2.595
Item#:
2595KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 3.268
Item#:
3268TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
|◀ ◀ 1861 - 1872 of 2557 ▶ ▶|
View: