Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1981 - 1992 of 2557 ▶ ▶|
View:
Wiseco 4-Stroke 94mm Bore
Item#:
9400XX
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
35.09
Each
Johnson 20-35hp Mecury 75-115hp EFI Yamaha 75-115hp Mercruiser Seadoo
Mercury
75hp EFi
80hp EFI
90hp EFI  
100hp EFI
115hp EFi 

Mercruiser 
215
225
250
255
270
300
325
350
370
390
4.3L
5.0L
6.2L

Johnson / Evinrude 
20hp 1990-1997
25hp 1990-2005
28hp 1990-1996
30hp 1990-2005
25hp 1990-1991 

Yamaha 
75hp 2003-2022
80hp 1999-2003
90hp 2003-2022
100hp 1999-2003
115hp 2000-2022
1.8L 115hp SHO 2015-2021 
150hp 2004-2022 

Seadoo 
1503
1630
Item#:
4255
Cross Reference#:
18-7146
290631300
420631300
47632
554545
777950
8M0050719
804255
81220
864701
9-76539
93210-29198-00
93210-30682-00
Manufacturer Item:
804255
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.29
Each
Item#:
RAK
Manufacturer:
Uflex
 
Heavy
Your Price:
240.0000
Each
Item#:
ACC
Manufacturer:
Uflex
 
Heavy
Your Price:
365.0000
Each
Item#:
MC0X
Manufacturer:
Uflex
 
Heavy
Your Price:
52.7300
Each
Item#:
ROT
Manufacturer:
Uflex
 
Heavy
Your Price:
230.0000
Each
Silver Steer 1500 PSI
Item#:
SVS12B
Manufacturer:
Uflex
Available:
In Stock
Your Price:
313.00
Each
Uflex Up to 115HP w/ 1/4x 6m hoses
Item#:
GT10
Manufacturer:
Uflex
Available:
In Stock
 
Heavy
Your Price:
1088.33
Each
Item#:
PMC0X
Manufacturer:
Pro Marine
 
Heavy
Your Price:
27.3100
Each
Easy Connect Steering Helm 3/4" tapered shaft (150HP Max)
Item#:
PHELM
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
01/05/2027
Your Price:
95.28
Each
No Torque - Easy Connection 150HP max
Item#:
PHELM-NR
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
124.81
Each
Item#:
M66X
Manufacturer:
Uflex
 
Heavy
Your Price:
155.0000
Each
|◀ ◀ 1981 - 1992 of 2557 ▶ ▶|
View: