S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Johnson, Evinrude & E-TEC Outboard Parts
Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Johnson, Evinrude & E-TEC Parts by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Find the Correct Johnson, Evinrude or E-TEC Part
Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Johnson, Evinrude & E-TEC Engine Families
Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.
- Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
- Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
- V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
- High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
- Ficht / FFI: direct-injection Johnson and Evinrude engine families
- E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges
Common Johnson & Evinrude Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
- No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
- Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?
- OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
- Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of older OMC-era parts and modern E-TEC service components.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Johnson or Evinrude outboard part?
Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.
Can I search Johnson and Evinrude parts by OEM part number?
Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Johnson and Evinrude parts vary by model and year?
Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.
Do you carry parts for Evinrude E-TEC engines?
Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.
Do you carry parts for older Johnson and Evinrude outboards?
Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.
What Johnson and Evinrude parts are commonly replaced during routine maintenance?
Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.
Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Pro Marine Marine-Grade Heat Shrink Electrical Connectors
Pro Marine RFD Red Female Heat Shrink Disconnect – 18–22 AWG – 25 Pack
The Pro Marine RFD Red Female Heat Shrink Disconnect is a fully insulated, marine-grade electrical terminal designed for creating secure, removable electrical connections in marine wiring systems.
These red female quick-disconnect terminals feature a heat-shrink insulation sleeve with an adhesive-lined interior that helps protect electrical connections from moisture, corrosion, salt spray, and vibration.
Designed for 18–22 AWG wire, these terminals use a standard 0.250-inch (1/4-inch) female disconnect connection that mates with a corresponding male quick-disconnect terminal.
Unlike permanent electrical connections, quick-disconnect terminals allow components to be disconnected and reconnected for servicing, troubleshooting, maintenance, or replacement without removing the crimped terminal from the wire.
Each package contains 25 red female heat shrink disconnect terminals, making them ideal for marine electrical repairs, equipment installations, and wiring projects.
PRO MARINE BULK PURCHASE SAVINGS
BUY 4 PACKS AND SAVE 10%!
Purchase 4 packs of RFD Female Disconnects and receive a 10% discount.
4 Packs × 25 Connectors = 100 Total Connections
SAVE 10% WHEN PURCHASING 100 CONNECTORS
Ideal for marine repair shops, electrical installers, service technicians, and customers purchasing connectors for multiple wiring projects.
Product Information
- Part Number: RFD
- Brand: Pro Marine
- Product Type: Female Heat Shrink Disconnect
- Connector Type: Female Quick Disconnect
- Terminal Configuration: Fully Insulated
- Wire Gauge: 18–22 AWG
- Insulation Color: Red
- Terminal Size: 0.250 Inch / 1/4 Inch
- Terminal Material: Tinned Copper
- Insulation Type: Adhesive-Lined Heat Shrink
- Connection Method: Crimp and Heat Shrink
- Shrink Ratio: Approximately 3:1
- Heat Shrink Recovery Temperature: Approximately 135°C / 275°F
- Operating Temperature: -55°C to 125°C
- Terminal Series Voltage Rating: 600V
- Package Quantity: 25 Female Disconnect Terminals
- Bulk Purchase: 4 Packs / 100 Connectors – Save 10%
- Application: Marine Electrical Wiring and Equipment Connections
- Condition: New
Product Identification
The following Pro Marine part numbers identify the female disconnect and the separately available matching male disconnect.
| Part Number | Brand | Description |
|---|---|---|
| RFD | Pro Marine | Red Female Heat Shrink Disconnect – 25 Pack |
| RMD | Pro Marine | Matching Red Male Heat Shrink Disconnect – 25 Pack (Sold Separately) |
What This Part Is Used For
Female heat shrink disconnect terminals are used to create removable electrical connections between marine wiring and compatible male terminals.
The female terminal is crimped onto the end of a wire and then connected to a corresponding male disconnect.
Once the heat-shrink insulation is properly recovered around the wire, the adhesive-lined sleeve helps protect the crimped wire termination from moisture and environmental exposure.
The quick-disconnect connection allows electrical components to be removed or serviced without cutting the wire or removing the crimped terminal.
Common Marine Electrical Applications
- Boat electrical wiring repairs
- Marine accessory installations
- Navigation and courtesy lighting connections
- Bilge pump wiring connections
- Marine switch and control wiring
- Electrical panel and accessory connections
- Boat wiring harness repairs
- Electrical equipment replacement
- Marine electronics accessory wiring
- Serviceable electrical connections requiring periodic disconnection
These are general examples of wiring applications. Always confirm that the terminal size, wire gauge, current requirements, and connection style are appropriate for the specific equipment.
Important Wire Gauge and Connector Fitment Note
Pro Marine RFD is a red female disconnect intended for 18–22 AWG wire and a 0.250-inch male disconnect terminal.
Electrical terminals must be selected according to the wire gauge and mating terminal dimensions. Using an incorrect connector size may result in an unreliable electrical connection.
This product is the female side of the connection. The corresponding male disconnect is sold separately.
Always verify wire gauge, terminal dimensions, electrical load, and mating connector compatibility before installation.
Compatible Wire Sizes and Electrical Applications
The Pro Marine RFD female heat shrink disconnect is designed for use with the following wire sizes and terminal configuration.
| Wire Gauge | Terminal Type | Connection Size | Compatibility |
|---|---|---|---|
| 22 AWG | Female Disconnect | 0.250 Inch | Compatible |
| 20 AWG | Female Disconnect | 0.250 Inch | Compatible |
| 18 AWG | Female Disconnect | 0.250 Inch | Compatible |
Connector Configuration
| Specification | Description |
|---|---|
| Connection Style | Female Quick Disconnect |
| Mating Terminal | Compatible 0.250-Inch Male Disconnect |
| Wire Attachment | Crimp Connection |
| Wire Insulation Protection | Adhesive-Lined Heat Shrink Sleeve |
| Connection Function | Removable and Reconnectable Electrical Connection |
This terminal is not specific to a particular outboard manufacturer, engine horsepower, or boat model. Compatibility is determined by the wire gauge, terminal dimensions, electrical requirements, and mating connector. The heat-shrink sleeve seals the crimped wire termination; the detachable male-to-female interface should not be assumed to be waterproof when connected.
MATCHING MALE CONNECTION AVAILABLE
Pro Marine RMD Red Male Heat Shrink Disconnect – 25 Pack
Need the other side of your electrical connection?
Pro Marine USA also offers the RMD Red Male Heat Shrink Disconnect, designed to provide the male side of a removable electrical connection.
Pair the RFD female disconnect with the corresponding RMD male disconnect when building or repairing marine electrical connections.
Both products are sold in convenient 25-piece packages.
Female Connection: RFD – Red Female Disconnect
Male Connection: RMD – Red Male Disconnect
The male and female terminals are purchased separately, allowing customers to order the quantities needed for their wiring projects.
View RMD Male Disconnect – 25 PackCommon Symptoms and Replacement Reasons
Marine electrical terminals may require replacement when corrosion, mechanical damage, or poor electrical contact affects the connection.
Common Reasons to Replace a Female Disconnect
- Corrosion on existing electrical terminals
- Loose or damaged female disconnect connections
- Damaged wire insulation near the terminal
- Broken or deteriorated electrical connectors
- Intermittent electrical accessory operation
- Electrical connections exposed to moisture
- Replacement of damaged wiring harness terminals
- Installation of new marine electrical accessories
- Conversion from damaged or unsuitable connectors
- Preventive replacement during electrical wiring repairs
Electrical problems can have multiple causes. Inspect the wiring, terminal condition, mating connector, and connected equipment before replacing components.
Installation and Service Tips
Proper installation is important for maintaining a secure electrical connection and obtaining the intended moisture protection from the heat-shrink insulation.
Recommended Installation Practices
- Disconnect electrical power before beginning wiring repairs or installation.
- Confirm the wire is within the 18–22 AWG range.
- Select a compatible 0.250-inch male disconnect for the mating connection.
- Strip the wire insulation according to the terminal installation requirements.
- Insert the prepared wire fully into the terminal crimp barrel.
- Use a crimping tool and die appropriate for insulated heat-shrink terminals.
- Crimp the terminal securely and inspect the completed connection.
- Apply controlled heat using a suitable heat gun to recover the insulation sleeve.
- Heat the sleeve evenly until it conforms around the wire insulation and the adhesive seal is properly formed.
- Allow the terminal to cool before handling or applying mechanical stress.
- Inspect the finished connection for exposed wire, incomplete shrinkage, or damaged insulation.
- Verify the male and female disconnects engage securely before restoring power.
Improper crimping, excessive heat, incorrect wire sizing, or an incompatible mating terminal can result in unreliable electrical connections. Follow appropriate installation procedures and applicable marine electrical standards. Avoid using an open flame to shrink the insulation.
Key Features and Benefits
- Marine-Grade Construction: Designed for electrical wiring applications where moisture and corrosion protection are important.
- Fully Insulated Female Terminal: Provides an insulated female quick-disconnect connection.
- Adhesive-Lined Heat Shrink: Helps seal the crimped wire termination against moisture and environmental exposure.
- Tinned Copper Construction: Provides electrical conductivity with corrosion-resistant terminal plating.
- Removable Connection: Allows electrical components to be disconnected and reconnected during maintenance or repairs.
- Standard 0.250-Inch Connection: Designed for use with compatible 1/4-inch male disconnect terminals.
- 18–22 AWG Wire Compatibility: Suitable for the specified range of smaller-gauge electrical wiring.
- Red Color Coding: Helps identify the terminal's intended wire gauge range.
- Convenient 25-Pack: Provides multiple connectors for electrical repairs and installations.
- Bulk Purchase Savings: Buy four 25-packs for a total of 100 connectors and save 10%.
- Matching Male Version Available: Pro Marine RMD male disconnects are sold separately.
- Dealer Pricing: Wholesale purchasing options are available to qualified Pro Marine USA dealers.
Frequently Asked Questions
What is Pro Marine RFD?
Pro Marine RFD is a red, fully insulated female heat shrink quick-disconnect terminal sold in a package of 25. It is used to create removable electrical connections in marine wiring systems.
What wire gauge does the RFD female disconnect fit?
RFD is intended for 18–22 AWG wire. Always confirm the wire size before installation.
What size male terminal connects to RFD?
RFD uses a standard 0.250-inch (1/4-inch) female disconnect connection. It requires a compatible male disconnect of the same connection size.
Does Pro Marine sell the matching male disconnect?
Yes. Pro Marine offers the RMD Red Male Heat Shrink Disconnect in a 25-piece package.
View Pro Marine RMD Male Disconnect
Are these connectors waterproof?
The adhesive-lined heat-shrink sleeve is designed to provide an environmental seal around the crimped wire termination when properly installed.
The detachable male-to-female connection itself should not be considered waterproof unless the complete connection assembly is specifically rated for that application.
Can these connectors be disconnected and reused?
The male and female disconnect interface is designed to be separated and reconnected during equipment servicing.
However, the crimped terminal is intended to remain attached to its wire. A removed or damaged crimp terminal should be replaced rather than recrimped.
How many female disconnects are included?
Each Pro Marine RFD package contains 25 female heat shrink disconnect terminals. Male terminals are sold separately.
Is there a discount for purchasing multiple packs?
Yes. Purchase 4 packs of RFD female disconnects for a total of 100 connectors and save 10%.
Can these terminals be used on boats and outboard wiring?
These terminals can be used in suitable marine electrical wiring applications, including accessory circuits and serviceable equipment connections.
They are not specific to any particular engine manufacturer or horsepower range. Confirm the wire gauge, terminal dimensions, electrical load, and environmental requirements for the installation.
Do I need a special tool to install these connectors?
Installation requires a suitable crimping tool for insulated terminals and a controlled heat source, such as a heat gun, to recover the heat-shrink insulation.
Follow the recommended crimping and heating procedures.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, electrical connectors, wiring components, and maintenance products to professional marine technicians, repair shops, dealerships, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible marine parts and supplies.
Dealer accounts provide professional marine businesses with access to competitive wholesale pricing and convenient online ordering.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday–Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1–5 business days.
- Shipping times may vary based on destination, carrier service, and product availability.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Products must be new, unused, and in original packaging.
- Installed or crimped electrical terminals are not returnable.
- Return authorization is required before returning merchandise.
- Contact Pro Marine USA before returning any merchandise.
Need Help Selecting Electrical Connectors?
Need assistance confirming the correct wire gauge, connector type, or marine electrical component?
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
RFD, RMD
RMD is the separately available matching male disconnect. Male terminals are not included with RFD.
Searchable Terms
Pro Marine RFD, RFD female disconnect, Pro Marine red female disconnect, red female heat shrink disconnect, red heat shrink quick disconnect, marine female disconnect terminal, marine electrical quick disconnect, female spade connector, female blade connector, 1/4 inch female disconnect, 0.250 inch female disconnect, 250 female disconnect terminal, 18 AWG female disconnect, 20 AWG female disconnect, 22 AWG female disconnect, 18-22 AWG heat shrink terminal, 22-18 AWG female disconnect, red insulated female terminal, fully insulated female disconnect, adhesive lined heat shrink terminal, waterproof wire termination, marine grade electrical connector, tinned copper disconnect terminal, marine wiring connector, boat electrical connector, boat wiring repair terminal, marine accessory wiring connector, bilge pump wiring connector, marine switch wiring terminal, marine electrical repair supplies, removable electrical connector, crimp heat shrink disconnect, heat shrink spade terminal, heat shrink blade terminal, female quick connect terminal, marine quick connect terminal, red female disconnect 25 pack, female electrical connectors bulk, 100 female disconnect terminals, bulk marine electrical connectors, Pro Marine heat shrink terminals, marine electrical terminal supplies
Pro Marine Marine-Grade Heat Shrink Electrical Connectors
Pro Marine RMD Red Male Heat Shrink Disconnect 1822 AWG 25 Pack
The Pro Marine RMD Red Male Heat Shrink Disconnect is a marine-grade electrical terminal designed to create secure, removable electrical connections in boat wiring systems. Featuring a 0.250-inch (1/4-inch) male blade terminal, this connector mates with a compatible female quick-disconnect terminal.
Each connector features an insulated crimp barrel with an adhesive-lined heat shrink sleeve that helps seal the wire termination against moisture and corrosion. The male blade provides a convenient connection point for marine electrical equipment that may need to be disconnected for maintenance, troubleshooting, or replacement.
Designed for 1822 AWG electrical wire, these red male disconnects are suitable for many low-voltage marine accessory circuits, wiring repairs, and electrical installations when properly sized for the application.
The RMD male terminal is designed to connect with a compatible female disconnect, including the Pro Marine RFD Red Female Heat Shrink Disconnect, which is available separately.
Each package contains 25 red male heat shrink disconnect terminals, providing a convenient supply for marine electrical repairs, equipment installations, and wiring projects.
PRO MARINE BULK PURCHASE SAVINGS
BUY 4 PACKS AND SAVE 10%!
Purchase 4 packs of RMD Male Disconnects and receive a 10% discount.
4 Packs × 25 Connectors = 100 Total Connectors
SAVE 10% WHEN PURCHASING 100 CONNECTORS
Ideal for marine repair shops, electrical installers, service technicians, and customers purchasing connectors for multiple wiring projects.
Product Information
- Part Number: RMD
- Brand: Pro Marine
- Product Type: Male Heat Shrink Disconnect
- Connector Type: Male Quick Disconnect
- Terminal Configuration: Insulated Crimp Barrel with Male Blade
- Wire Gauge: 1822 AWG
- Insulation Color: Red
- Terminal Size: 0.250 Inch / 1/4 Inch
- Insulation Type: Adhesive-Lined Heat Shrink
- Connection Method: Crimp and Heat Shrink
- Package Quantity: 25 Male Disconnect Terminals
- Bulk Purchase: 4 Packs / 100 Connectors Save 10%
- Application: Marine Electrical Wiring and Equipment Connections
- Matching Female Disconnect: Pro Marine RFD (Sold Separately)
- Condition: New
Product Identification
Pro Marine RMD is the male side of a quick-disconnect electrical connection. The corresponding RFD female disconnect is available separately.
| Part Number | Brand | Description |
|---|---|---|
| RMD | Pro Marine | Red Male Heat Shrink Disconnect 25 Pack |
| RFD | Pro Marine | Matching Red Female Heat Shrink Disconnect 25 Pack (Sold Separately) |
What This Part Is Used For
Male heat shrink disconnect terminals provide the blade side of a removable electrical connection. The terminal is crimped onto a wire and connected to a compatible female disconnect.
This connection style is commonly used when electrical equipment needs to be removed, inspected, or replaced without cutting the existing wiring.
The heat-shrink insulation helps protect the crimped wire termination, while the male blade allows the electrical connection to be separated from its mating female terminal.
Common Marine Electrical Applications
- Boat electrical wiring repairs
- Marine accessory installations
- Navigation light and courtesy light connections
- Bilge pump accessory wiring
- Marine switch and control circuits
- Electrical panel connections
- Boat wiring harness repairs
- Replacement of damaged electrical terminals
- Serviceable marine equipment connections
- Custom marine wiring projects
These are general application examples. The correct terminal must be selected based on wire gauge, connector dimensions, circuit requirements, and installation conditions.
Important Wire Gauge and Connector Fitment Note
Pro Marine RMD is a red male disconnect intended for 1822 AWG wire and compatible 0.250-inch female disconnect terminals.
Electrical terminals must be matched to the wire gauge and mating connector size. Using the wrong terminal may cause poor electrical contact, overheating, or connection failure.
This product is the male side of the connection. The corresponding female disconnect is sold separately.
Confirm wire gauge, electrical load, terminal dimensions, and mating connector compatibility before installation.
Compatible Wire Sizes and Electrical Applications
Pro Marine RMD is designed for use with appropriately sized electrical wire and a compatible female quick-disconnect terminal.
| Wire Gauge | Terminal Type | Connection Size | Compatibility |
|---|---|---|---|
| 22 AWG | Male Disconnect | 0.250 Inch | Compatible |
| 20 AWG | Male Disconnect | 0.250 Inch | Compatible |
| 18 AWG | Male Disconnect | 0.250 Inch | Compatible |
Connector Configuration
| Specification | Description |
|---|---|
| Connection Style | Male Quick Disconnect |
| Mating Terminal | Compatible 0.250-Inch Female Disconnect |
| Wire Attachment | Crimp Connection |
| Wire Insulation Protection | Adhesive-Lined Heat Shrink Sleeve |
| Connection Function | Removable and Reconnectable Electrical Connection |
This connector is not specific to any particular boat model, outboard manufacturer, engine horsepower, or production year. Compatibility is determined by wire gauge, terminal dimensions, and electrical requirements. The heat-shrink sleeve protects the wire termination, but the detachable male-to-female interface should not be assumed waterproof.
MATCHING FEMALE CONNECTION AVAILABLE
Pro Marine RFD Red Female Heat Shrink Disconnect 25 Pack
Complete your electrical connection with the matching Pro Marine RFD Red Female Heat Shrink Disconnect.
RFD provides the female side of the connection and is designed to mate with a compatible 0.250-inch male blade terminal.
Using the corresponding male and female disconnects allows electrical components to be connected, disconnected, and serviced without cutting the wiring.
Male Connection: RMD Red Male Disconnect
Female Connection: RFD Red Female Disconnect
Both products are sold in 25-piece packages. Male and female terminals are purchased separately.
View RFD Female Disconnect 25 PackCommon Symptoms and Replacement Reasons
Male disconnect terminals should be inspected during electrical troubleshooting and replaced when corrosion, physical damage, or poor terminal engagement affects the connection.
Common Reasons to Replace a Male Disconnect
- Corroded or oxidized male blade terminals
- Bent, broken, or damaged connector blades
- Loose or intermittent electrical connections
- Damaged heat-shrink insulation
- Broken or deteriorated wire terminations
- Evidence of overheating or discoloration
- Electrical accessories operating intermittently
- Replacement of damaged wiring harness connections
- Installation of new marine electrical equipment
- Preventive electrical wiring maintenance
Inspect both sides of the connection. A damaged female terminal can also cause poor contact with a male blade. Replace any terminals that are worn, loose, corroded, or overheated.
Installation and Service Tips
Correct crimping and heat-shrink installation help provide a dependable electrical termination in marine environments.
Recommended Installation Practices
- Disconnect electrical power before beginning wiring repairs.
- Confirm the wire size is within the 1822 AWG range.
- Verify that the female mating terminal accepts a 0.250-inch male blade.
- Strip the wire insulation to the appropriate length for the crimp barrel.
- Insert the prepared wire fully into the terminal barrel.
- Use a suitable crimping tool designed for insulated heat-shrink terminals.
- Crimp the connector securely and inspect the mechanical connection.
- Use a controlled heat gun to shrink the insulation around the wire.
- Heat evenly until the sleeve conforms to the wire insulation and forms its seal.
- Allow the connector to cool before applying mechanical stress.
- Inspect the male blade for damage or distortion before connecting.
- Verify the male and female terminals engage securely before restoring power.
Improper crimping, incorrect wire sizing, excessive heating, or loose terminal engagement can result in electrical resistance, overheating, or connection failure. Use the proper tools and follow applicable marine electrical installation standards. Do not use an open flame to shrink the insulation.
Key Features and Benefits
- Marine-Grade Electrical Terminal: Suitable for marine wiring applications where corrosion and moisture protection are important.
- Male Quick-Disconnect Design: Provides the blade side of a removable electrical connection.
- Adhesive-Lined Heat Shrink: Helps protect the crimped wire termination against moisture and environmental exposure.
- Standard 0.250-Inch Blade: Connects to compatible 1/4-inch female quick-disconnect terminals.
- 1822 AWG Wire Compatibility: Designed for appropriately sized small-gauge electrical wiring.
- Serviceable Connection: Allows equipment to be disconnected without removing the crimped terminal.
- Red Insulation: Provides convenient wire gauge identification.
- Convenient 25-Pack: Provides multiple terminals for marine wiring repairs and installations.
- Bulk Purchase Savings: Buy four 25-packs for 100 total connectors and save 10%.
- Matching Female Version Available: Pro Marine RFD female disconnects are sold separately.
- Dealer Pricing: Qualified marine professionals can apply for wholesale pricing.
Frequently Asked Questions
What is Pro Marine RMD?
Pro Marine RMD is a red male heat shrink quick-disconnect terminal sold in a package of 25. It provides the male blade side of a removable electrical connection.
What wire gauge does RMD fit?
RMD is intended for 1822 AWG wire. Confirm wire size before installation.
What size female disconnect fits RMD?
RMD features a 0.250-inch (1/4-inch) male blade. It connects to a compatible female disconnect of the same size.
Does Pro Marine sell the matching female disconnect?
Yes. Pro Marine offers the RFD Red Female Heat Shrink Disconnect in a 25-piece package.
View Pro Marine RFD Female Disconnect
Are these male disconnects waterproof?
The adhesive-lined heat-shrink insulation helps create a moisture-resistant seal around the crimped wire termination. The removable male-to-female connection itself should not be considered waterproof unless the complete assembly is rated for that application.
Can the male and female terminals be disconnected repeatedly?
Yes. Quick-disconnect terminals are designed to allow equipment to be disconnected and reconnected for maintenance. Replace terminals if they become loose, damaged, or corroded.
How many connectors are included in one pack?
Each Pro Marine RMD package includes 25 red male heat shrink disconnect terminals. Female terminals are sold separately.
Is there a discount for purchasing 100 connectors?
Yes. Purchase 4 packs of RMD for a total of 100 male disconnect terminals and save 10%.
Can these terminals be used for marine electrical repairs?
Yes. RMD terminals can be used in suitable marine electrical wiring applications when the wire gauge, connector size, electrical load, and installation environment are appropriate.
What tools are needed to install RMD terminals?
Use a suitable wire stripper, a crimping tool designed for insulated heat-shrink terminals, and a controlled heat gun to shrink the insulation.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, electrical connectors, wiring components, and maintenance products to professional marine technicians, repair shops, dealerships, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible marine parts and supplies.
Dealer accounts provide professional marine businesses with access to competitive wholesale pricing and convenient online ordering.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, MondayFriday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 15 business days.
- Shipping times may vary based on destination, carrier service, and product availability.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Products must be new, unused, and in original packaging.
- Installed or crimped electrical terminals are not returnable.
- Return authorization is required before returning merchandise.
- Contact Pro Marine USA before returning any merchandise.
Need Help Selecting Electrical Connectors?
Need assistance confirming the correct wire gauge, connector type, or marine electrical component?
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
RMD, RFD
RFD is the separately available matching female disconnect. Female terminals are not included with RMD.
Searchable Terms
Pro Marine RMD, RMD male disconnect, Pro Marine red male disconnect, red male heat shrink disconnect, red heat shrink quick disconnect, marine male disconnect terminal, marine electrical quick disconnect, male spade connector, male blade connector, 1/4 inch male disconnect, 0.250 inch male disconnect, 250 male disconnect terminal, 18 AWG male disconnect, 20 AWG male disconnect, 22 AWG male disconnect, 18-22 AWG heat shrink terminal, 22-18 AWG male disconnect, red insulated male terminal, adhesive lined heat shrink terminal, marine grade electrical connector, marine wiring connector, boat electrical connector, boat wiring repair terminal, marine accessory wiring connector, bilge pump wiring connector, marine switch wiring terminal, marine electrical repair supplies, removable electrical connector, crimp heat shrink disconnect, heat shrink spade terminal, heat shrink blade terminal, male quick connect terminal, marine quick connect terminal, red male disconnect 25 pack, male electrical connectors bulk, 100 male disconnect terminals, bulk marine electrical connectors, Pro Marine heat shrink terminals, marine electrical terminal supplies
Marine Battery Cable and Electrical Rigging
2 Gauge Battery Cable Butt Connector - 2 AWG Marine Cable Splice
The 2BC Battery Cable Butt Connector is designed for joining two sections of 2 gauge (2 AWG) battery cable. This heavy-gauge electrical connector is used for battery cable repairs, cable extensions and custom marine electrical installations.
Whether repairing an existing battery cable or building a custom cable assembly, a properly installed butt connector provides a mechanical and electrical connection between two cable ends.
The 2BC connector can be used with compatible 2 AWG red or black battery cable. For marine applications, the completed connection should be protected with appropriately sized marine-grade heat-shrink tubing to help prevent moisture intrusion and corrosion.
Pro Marine USA also carries matching 2 gauge battery cable and 1/2-inch heat shrink in red, black and combination packs, making it easy to purchase the materials needed for your battery cable installation.
Product Information
- Item Number: 2BC
- Product: Battery Cable Butt Connector
- Cable Size: 2 Gauge / 2 AWG
- Connector Type: Butt Splice Connector
- Application: Battery Cable Splicing and Repair
- Compatible Cable: 2 AWG Battery Cable
- Connection Type: Crimped Cable Splice
- Installation: Requires an appropriate heavy-duty cable crimping tool
- Recommended Protection: Compatible Marine-Grade Heat Shrink
- Typical Uses: Marine Battery Cables, Electrical Rigging and Cable Repairs
What This Part Is Used For
The 2BC butt connector is used to join two sections of 2 AWG battery cable when repairing, extending or assembling heavy-gauge electrical wiring.
Marine battery cables carry significant electrical current. Connections must be properly sized, securely crimped and protected against moisture and corrosion.
Common Applications
- Marine battery cable repairs
- Joining two sections of 2 AWG battery cable
- Custom battery cable fabrication
- Boat electrical system rigging
- Battery cable extensions where permitted by the installation requirements
- Battery switch and distribution wiring repairs
- Marine engine battery cable service
- Other compatible heavy-gauge DC electrical installations
This connector is not engine-specific. Compatibility is determined primarily by the cable gauge, conductor construction and electrical installation requirements.
Compatible Battery Cable
The 2BC connector is intended for use with compatible 2 gauge battery cable. Pro Marine USA offers the following matching cable options.
| Item | Description | Cable Size | Color | Product |
|---|---|---|---|---|
| 2B | Battery Cable - Black | 2 AWG | Black | View Cable |
| 2R | Battery Cable - Red | 2 AWG | Red | View Cable |
Build or Repair Your 2 Gauge Battery Cable
Complete your battery cable installation with compatible 2 AWG cable and heat-shrink tubing available from Pro Marine USA.
Matching 2 AWG Battery Cable
2B - 2 Gauge Black Battery Cable
Black 2 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for negative battery cable connections.
Shop 2 Gauge Black CableMatching 2 AWG Battery Cable
2R - 2 Gauge Red Battery Cable
Red 2 AWG battery cable for compatible marine battery and electrical wiring installations. Commonly used for positive battery cable connections.
Shop 2 Gauge Red CableRecommended Heat Shrink for Battery Cable Connections
After crimping a battery cable butt connector, protect the completed splice with properly sized marine-grade heat-shrink tubing.
Heat shrink helps provide electrical insulation, strain relief and protection from moisture when the tubing is appropriate for the application and correctly installed.
| Item | Description | Color | Product Link |
|---|---|---|---|
| 12RB | 1/2-Inch Heat Shrink - Red and Black Combination | Red and Black | View Heat Shrink |
| 12R | 1/2-Inch Red Heat Shrink - 1 Foot | Red | View Heat Shrink |
| 12B | 1/2-Inch Black Heat Shrink - 1 Foot | Black | View Heat Shrink |
Important: Verify that the heat-shrink tubing has the appropriate expanded diameter, recovered diameter and environmental rating for the completed splice. A nominal 1/2-inch size alone does not establish fit.
How to Install a 2 Gauge Battery Cable Butt Connector
Proper installation is essential for a reliable heavy-gauge battery cable connection.
- Disconnect the battery. Isolate the electrical system before working on battery cables. Disconnect the negative connection first when appropriate for the installation.
- Measure and cut the cable. Determine the required cable length and cut the 2 AWG battery cable cleanly.
- Prepare the heat shrink. Slide an appropriately sized piece of heat-shrink tubing onto the cable before making the splice.
- Strip the cable insulation. Remove only enough insulation for the connector's required insertion depth. Avoid damaging the conductor strands.
- Insert the cable. Insert the stripped cable end fully into one side of the butt connector. Repeat with the second cable.
- Crimp the connector. Use a properly sized heavy-duty crimping tool and the crimping method specified for the connector and cable.
- Inspect the connection. Check that both cable ends are securely retained and the crimp is properly formed.
- Apply heat shrink. Center the tubing over the splice and shrink it according to the tubing manufacturer's instructions.
- Secure the cable. Support the completed assembly and protect it from abrasion, sharp edges and excessive movement.
Important Battery Cable Installation Information
Battery cables can carry very high current. Improperly installed connections can overheat, create excessive electrical resistance or cause electrical system failure.
- Use only connectors approved for the cable size and conductor type.
- Use the correct crimping tool and manufacturer-recommended crimp method.
- Do not use ordinary pliers to crimp heavy-gauge battery cable connectors.
- Do not rely on solder alone to secure a battery cable connection.
- Protect the completed connection from moisture, abrasion and vibration.
- Follow applicable marine electrical standards and equipment manufacturer requirements.
- Use a continuous cable run where required by the engine or electrical system manufacturer.
- Do not splice engine starting cables where the manufacturer prohibits splices.
For critical starting and high-current circuits, have the installation inspected by a qualified marine electrical technician when necessary.
Key Features and Benefits
- 2 AWG Cable Compatibility: Designed for compatible 2 gauge battery cable connections.
- Battery Cable Repair: Useful for joining or repairing heavy-gauge electrical cable.
- Marine Electrical Applications: Suitable for appropriately specified boat battery and rigging installations.
- Red or Black Cable: Can be used with compatible 2 AWG cable regardless of insulation color.
- Crimp Connection: Designed to be installed using an appropriate heavy-duty cable crimping tool.
- Heat-Shrink Protection: Can be protected with correctly sized external heat-shrink tubing.
- Matching Products Available: Pro Marine USA carries 2 AWG cable and red, black and combination heat-shrink options.
Frequently Asked Questions
What size cable does the 2BC butt connector fit?
The 2BC butt connector is intended for compatible 2 gauge (2 AWG) battery cable. Confirm the connector and conductor dimensions before installation.
Can I use this connector on marine battery cables?
It can be used for appropriate marine battery cable splicing applications when the connector, cable, crimping method and environmental protection meet the installation requirements.
Can I use the same connector with red and black battery cable?
Yes. The connector is sized by cable gauge, not insulation color. It can be used with compatible 2 AWG red or black cable.
What black battery cable works with this connector?
Pro Marine USA offers 2B - 2 Gauge Black Battery Cable.
What red battery cable works with this connector?
Pro Marine USA offers 2R - 2 Gauge Red Battery Cable.
Do I need heat shrink when installing a battery cable butt connector?
For marine applications, properly selected heat-shrink tubing is recommended to insulate and protect the completed connection against moisture and corrosion.
What heat shrink can I purchase for this connector?
Pro Marine USA offers 1/2-inch heat shrink in red, black and combination packs. Confirm that the tubing will fit over the completed splice and recover tightly around the cable insulation.
Does this connector already have heat shrink attached?
This listing identifies a battery cable butt connector. Integrated heat shrink has not been confirmed. The heat-shrink products linked above are available separately.
Can I use regular pliers to crimp this connector?
No. Heavy-gauge battery cable connectors require an appropriate crimping tool and correctly matched dies or crimping method.
Can I extend an outboard engine battery cable with this connector?
Only where the engine manufacturer and applicable electrical installation requirements permit a spliced battery cable. Some engine starting circuits require continuous cable runs.
Is 2 AWG the same as 2/0 AWG?
No. 2 AWG and 2/0 AWG are different cable sizes. This connector is identified for 2 AWG cable, not 2/0 AWG cable.
Can this connector be used with 4 gauge or 6 gauge cable?
No. Use a connector specifically sized for the cable gauge being installed.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies OEM and aftermarket marine parts, electrical components, battery cables and rigging supplies to marine repair shops, dealerships, professional technicians and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on qualifying orders over $100 within the continental United States. Oil and oversized items are excluded.
- In-stock orders placed before 5:30 PM EST ship the same business day, Monday-Friday.
- Shipping options include UPS, USPS and FedEx.
- Typical delivery is 1-5 business days, depending on destination and shipping service.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- OEM electrical components are not returnable.
- Return authorization is required before returning merchandise.
Need Help Selecting Battery Cable Components?
Contact Pro Marine USA for assistance identifying battery cable, electrical connectors, heat shrink and other marine rigging supplies.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
2BC, 2B, 2R, 12RB, 12R, 12B
Searchable Terms
2 gauge battery cable butt connector, 2 AWG battery cable splice, marine battery cable connector, boat battery cable butt splice, heavy gauge wire connector, 2 gauge wire splice connector, marine battery cable repair, battery cable extension connector, boat electrical rigging, marine electrical cable splice, 2 AWG red battery cable, 2 AWG black battery cable, marine battery cable heat shrink, 1/2 inch red heat shrink, 1/2 inch black heat shrink, marine battery cable fabrication, battery cable crimp connector, boat battery wiring connector, marine DC electrical connector