Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2257 - 2268 of 2557 ▶ ▶|
View:
Item#:
YRT38
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.68
25 PACK
Item#:
12B-4
Manufacturer Item:
BEHS-1/2BK
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
14.69
Each
Item#:
12R-4
Manufacturer Item:
BEHS-1/2RD
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
14.69
Each
Item#:
18-7929
Cross Reference#:
9-37883
Manufacturer Item:
B32020MAM
Manufacturer:
Sierra
Available:
In Stock
Your Price:
86.09
Each
Item#:
18-7924
Cross Reference#:
9-37885
Manufacturer Item:
660RRAC01
Manufacturer:
Sierra
Available:
In Stock
Your Price:
44.19
Each
Racor Style w/Bracket 1/4" NPT
Item#:
18-7951
Cross Reference#:
9-37881
Manufacturer Item:
320RRAC01
Manufacturer:
Sierra
Available:
In Stock
Your Price:
171.89
Each
Item#:
SR107
Manufacturer:
Arco
Available:
In Stock
Your Price:
34.65
Each
Universal/Transparent
Item#:
7723
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.13
Each
Universal/Transparent
Item#:
7724
Manufacturer:
Pro Marine
Available:
In Stock
7.9900
Your Price:
7.90
Each
Mercury/Honda/Nissan/ Tohatsu Inline 1/4" 4-30HP
Item#:
7712P
Cross Reference#:
16248
369022300
369022300M
369022301
369022301M
5040140
8M0157133
Manufacturer Item:
16248
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.26
Each
FFI, OMC, Volvo EFI 10 Micron
Item#:
50290
Cross Reference#:
0502906
0768651
0777713
0987141
0987228
0987754
18-7789
18-7989
3851218
3852413
3862228
5009676
5009676
5011090
5012363
502906
768651
777713
8M0154770
8M0154772
987141
987228
987754
Manufacturer Item:
502906
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
11.09
Each
Heavy-Duty Type A1 Bulk Fuel Line for High-Flow Marine Applications

1/2" Type A1 Marine Fuel Hose

MPI 360-12 1/2" Type A1 Marine Fuel Hose

The MPI 360-12 1/2" Type A1 Marine Fuel Hose is a heavy-duty bulk fuel line for marine fuel systems requiring a 1/2" inside diameter and the additional fire-resistant protection associated with Type A1 marine fuel hose.

The larger 1/2" inside diameter makes this hose suitable for higher-flow marine fuel-system applications where a larger supply line is required.

Pro Marine stocks the matching German-style hose clamp, installation tools and a complete clamp assortment for marine fuel-system service.

1/2" Type A1 Marine Fuel Line

Inside Diameter: 1/2"
Manufacturer: MPI Products
Fuel Hose Type: Type A1
Application: Marine Fuel System
Matching Clamp: German-Style Hose Clamp 4-4

What is Type A1 Marine Fuel Hose?

Type A1 marine fuel hose is designed for fuel-feed applications requiring a marine hose with enhanced fire-resistant performance.

Type A1 hose is commonly used in permanent marine fuel systems and installations where the fuel line passes through enclosed or below-deck areas.

When selecting fuel hose, both the inside diameter and the required hose classification should be verified for the installation.

Why Use 1/2" Fuel Hose?

A 1/2" fuel line provides greater internal flow area than the more common 1/4", 5/16" and 3/8" marine fuel hoses.

It may be used in applications where the engine or fuel-system design requires a larger fuel supply line to support higher fuel-flow demand.

Always follow the engine or boat manufacturer's required hose diameter rather than increasing or decreasing hose size without verifying the fuel-system requirements.

1/2" Fuel Line Usually Does Not Use a Primer Bulb

Unlike many smaller outboard fuel-line assemblies, a 1/2" marine fuel-line system would not normally use an inline hand primer bulb.

Larger 1/2" fuel lines are generally associated with higher-flow fuel systems where fuel delivery is handled by the engine's fuel-system configuration rather than a manual primer bulb.

Always follow the fuel-system design specified for the engine and boat.

Matching Fuel Hose Clamp

German-Style Hose Clamp - 4-4

Recommended hose clamp for the MPI 360-12 1/2" Type A1 marine fuel hose.

German-style hose clamps provide a secure connection for larger marine fuel-hose applications.

View German-Style Hose Clamp

Fuel Line Tools and Clamp Assortment

Oetiker Pincer Oetiker Standard Jaw Pincer Tool

Useful installation tool for Oetiker ear clamps used throughout many marine fuel-line systems.

While this 1/2" hose uses the German-style clamp shown above, the pincer tool is useful when servicing other fuel-hose sizes that use Oetiker ear clamps.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool

Complete assortment of common Oetiker clamp sizes with the installation tool included.

A convenient option for marine shops and technicians servicing different fuel-hose sizes throughout a boat or engine.

View Oetiker Clamp Pack

What This Fuel Hose is Used For

MPI 360-12 is used when building, repairing or replacing a marine fuel supply line requiring 1/2" Type A1 hose.

Typical applications involve larger marine fuel systems where increased fuel-flow capacity is required and the installation calls for Type A1 hose.

Typical 1/2" Fuel-Line Setup

Depending on the boat and engine, a 1/2" marine fuel-line installation may include:

  • MPI 360-12 1/2" Type A1 marine fuel hose
  • German-style 4-4 hose clamps
  • Fuel tank pickup or shutoff valve
  • Fuel/water separator or filter assembly
  • Engine fuel-system connection
  • Application-specific fittings and adapters

Primer Bulb vs. Larger Fuel Systems

Smaller outboard fuel systems commonly use 1/4", 5/16" or 3/8" hose with an inline primer bulb.

A 1/2" fuel supply line generally indicates a higher-flow fuel system, and a hand primer bulb is not normally part of that configuration.

The engine manufacturer's fuel-system requirements should always take priority when determining hose size, fittings, filters and priming components.

Fuel Hose Size Comparison

Hose ID Typical Pro Marine Fuel-Line Options Primer Bulb Available
1/4" Type A / Type B Yes - Pro Marine 8002
5/16" Type A / Type B / Mercury OEM Yes - Pro Marine 8004
3/8" Type A / Type B Yes - Pro Marine 8005
1/2" Type A1 - MPI 360-12 Normally not used

Key Features & Benefits

  • 1/2" inside diameter
  • MPI Products marine fuel hose
  • Type A1 marine fuel-hose classification
  • Designed for fuel-feed applications requiring Type A1 hose
  • Suitable for higher-flow marine fuel systems
  • Common choice for enclosed or below-deck fuel-line routing when 1/2" hose is required
  • Matching German-style 4-4 hose clamp available
  • Primer bulb normally not used with 1/2" fuel-line systems
  • Fuel-system installation tools and clamp assortment available

Need Help Choosing the Right Marine Fuel Hose?

Fuel-line diameter, Type A or Type B classification, fuel-system flow requirements, fittings, filters and clamp selection all need to match the boat and engine installation.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is MPI 360-12?
This fuel hose has a 1/2" inside diameter.

What type of fuel hose is 360-12?
It is Type A1 marine fuel hose.

What is Type A1 fuel hose used for?
Type A1 is used for marine fuel-feed applications requiring the additional fire-resistant performance associated with Type A hose.

Can this hose be used below deck?
Type A1 hose is commonly used in enclosed and below-deck fuel-system installations when the fuel system calls for this hose size and classification.

Which clamp fits this 1/2" hose?
Use the German-Style 4-4 Hose Clamp .

Does this hose use an Oetiker ear clamp?
The recommended clamp for this hose is the German-style 4-4 hose clamp.

Does 1/2" fuel hose use a primer bulb?
A primer bulb is not normally used in a fuel system requiring 1/2" hose. Larger lines are typically used in higher-flow fuel systems with a different priming and fuel-delivery arrangement.

Should I use 1/2" hose just to increase fuel flow?
Use the hose diameter specified for the engine and fuel system. Increasing hose size without verifying the complete system is not a substitute for following the manufacturer's fuel-system requirements.

Do you sell fuel-line clamp tools?
Yes. Pro Marine stocks the Oetiker Standard Jaw Pincer Tool for fuel-line applications using Oetiker ear clamps.

Do you sell a complete clamp assortment?
Yes. The Oetiker Clamp Pack with Tool includes commonly used clamp sizes and an installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 in the continental U.S.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help choosing the correct fuel-line parts?
Contact Pro Marine
Phone: 941-721-3000


Searchable Part Numbers & Terms

360-12, MPI 360-12, 1/2 fuel hose, 1/2 marine fuel hose, 1/2 boat fuel line, 1/2 Type A1 fuel hose, Type A1 marine fuel line, marine fuel supply hose, high flow marine fuel hose, large outboard fuel line, boat fuel hose, below deck fuel hose, enclosed marine fuel line, marine fuel line, German style hose clamp, 4-4 hose clamp, marine fuel hose clamp, bulk marine fuel hose, marine fuel system, fuel hose by the foot

Item#:
360-12
Manufacturer:
MPI Products
Available:
In Stock
4.9100
Your Price:
3.75
Foot
|◀ ◀ 2257 - 2268 of 2557 ▶ ▶|
View: