Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2341 - 2352 of 2557 ▶ ▶|
View:
Item#:
113R
Cross Reference#:
0349516
0769100
18-9128-9
Manufacturer Item:
349516
Manufacturer:
TH Marine
Available:
In Stock
Your Price:
0.67
Each
Item#:
ATC20
Manufacturer Item:
EATC20
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
Item#:
ATC30
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
Item#:
ATC75
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
Item#:
ATC10
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
Bulk 3/8" Fuel Line for Above-Deck Marine Applications

MPI Type B Marine Fuel Hose

MPI 3/8" Marine Fuel Hose - Type B - Sold by the Foot

The MPI 375 3/8" Fuel Hose is bulk marine fuel line designed for applications using 3/8" inside-diameter hose. It is sold by the foot so you can purchase the continuous length needed for your boat or outboard fuel-system installation.

This is the Type B version, commonly used in exposed and above-deck marine fuel-line applications where Type B hose is appropriate.

Pro Marine also stocks the matching Oetiker 4-185 ear clamp, Pro Marine 8005 3/8" primer bulb, Oetiker installation tools and a 3/8" Type A alternative.

3/8" Bulk Marine Fuel Line

Inside Diameter: 3/8"
Manufacturer: MPI Products
Fuel Hose Type: Type B Marine Fuel Hose
Sold: By the Foot
Recommended Clamp: Oetiker 4-185
Recommended Primer Bulb: Pro Marine 8005 - 3/8"

How to Order Bulk Fuel Hose

This hose is sold by the foot. Enter the quantity based on the total continuous length required for your installation.

For example, if you need 8 feet of fuel hose, order a quantity of 8.

Type B Marine Fuel Hose

Type B marine fuel hose is commonly used in exposed or above-deck fuel-system applications where that hose classification is appropriate.

Type B hose does not carry the same additional fire-test classification associated with Type A marine fuel hose. If the installation requires Type A hose, use the 3/8" Type A option linked below.

Need 3/8" Type A Fuel Hose?

For installations requiring the additional Type A fire-resistant classification, use the 3/8" Type A marine fuel hose.

View 3/8" Type A Marine Fuel Hose

Complete Your 3/8" Fuel Line Setup

Pro Marine stocks the correct clamp, primer bulb and installation tools needed to build or service a 3/8" marine fuel-line assembly.

Oetiker 4-185 Clamp Oetiker 4-185 Ear Clamp - 10 Pack

Matching Oetiker ear clamp for this 3/8" Type B hose. This same clamp is also used with the 3/8" Type A hose listed below.

Clamp: 4-185

View Oetiker 4-185 Clamp
3/8 Primer Bulb Pro Marine 8005 - 3/8" Primer Bulb

Matching 3/8" primer bulb for building or repairing marine outboard fuel-line assemblies using 3/8" fuel hose.

Hose Size: 3/8"

View 3/8" Primer Bulb
Oetiker Pincer Oetiker Standard Jaw Pincer Tool

Installation tool for properly closing Oetiker ear clamps on marine fuel-line connections.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool

Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. A convenient setup for marine shops, technicians and customers servicing multiple hose sizes.

View Oetiker Clamp Pack

3/8" Type A Alternative

3/8" Type A Marine Fuel Hose - 375-1

Use the Type A version when the installation requires the additional Type A fire-resistant marine fuel-hose classification.

Inside Diameter: 3/8"
Fuel Hose Type: Type A
Matching Clamp: Oetiker 4-185
Primer Bulb: Pro Marine 8005 - 3/8"

View 3/8" Type A Fuel Hose

3/8" Type A vs. Type B Fuel Hose

Fuel Hose Classification Matching Clamp Primer Bulb
375 Type B Oetiker 4-185 Pro Marine 8005 - 3/8"
375-1 Type A Oetiker 4-185 Pro Marine 8005 - 3/8"

Same Clamp for Both 3/8" Fuel Hoses

Unlike some of the smaller fuel-hose sizes, both of these 3/8" fuel-line options use the same Oetiker 4-185 clamp.

That means the clamp selection stays the same whether you choose the Type A or Type B 3/8" hose. The main decision between the two hoses is the required marine fuel-hose classification for the installation.

What This Fuel Hose is Used For

The 375 3/8" Type B fuel hose is used for building, repairing or replacing marine fuel lines where 3/8" hose and Type B construction are appropriate.

Bulk hose sold by the foot makes it possible to build the required length and pair it with the correct primer bulb, fittings and clamps for the specific boat and engine installation.

Building a 3/8" Outboard Fuel Line

Depending on the application, a complete 3/8" fuel-line setup may include:

  • 3/8" Type B marine fuel hose
  • Pro Marine 8005 3/8" primer bulb
  • Correct tank-side fitting or connector
  • Correct engine-side fitting or connector
  • Oetiker 4-185 ear clamps
  • Oetiker pincer installation tool

Primer Bulb Selection

Primer bulb fittings should match the inside diameter of the fuel hose. For 3/8" fuel line, use the Pro Marine 8005 3/8" Primer Bulb.

View Pro Marine 8005 3/8" Primer Bulb

Key Features & Benefits

  • 3/8" inside diameter
  • Marine Type B fuel hose
  • Commonly used for exposed and above-deck installations where Type B hose is appropriate
  • Sold by the foot for custom-length installations
  • Uses Oetiker 4-185 ear clamp
  • Matching Pro Marine 8005 3/8" primer bulb available
  • 3/8" Type A alternative available
  • Type A and Type B hoses both use the same 4-185 clamp
  • Oetiker pincer installation tool available
  • Complete Oetiker clamp assortment with tool available

Need Help Choosing the Right Marine Fuel Hose?

Fuel-hose diameter is only one part of choosing the correct line. Installation location, Type A or Type B classification, primer bulb size, fittings and clamp selection should all be considered.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is this fuel hose?
This hose has a 3/8" inside diameter.

Is this fuel hose sold by the foot?
Yes. Order the quantity corresponding to the total number of feet needed.

What type of marine fuel hose is this?
This is Type B marine fuel hose.

Which clamp fits this 3/8" Type B hose?
Use the Oetiker 4-185 ear clamp .

Which primer bulb fits this hose?
Use the Pro Marine 8005 3/8" Primer Bulb .

What if I need 3/8" Type A fuel hose?
Use the 375-1 3/8" Type A Marine Fuel Hose .

Does the 3/8" Type A hose use the same clamp?
Yes. Both the Type A and Type B 3/8" hoses use the Oetiker 4-185 ear clamp.

Can I use the same primer bulb with the Type A hose?
Yes. Both hoses have a 3/8" inside diameter, so the Pro Marine 8005 3/8" primer bulb is the matching size for either hose.

What tool installs the Oetiker clamps?
Use the Oetiker Standard Jaw Pincer Tool .

Do you sell a complete clamp assortment?
Yes. The Oetiker Clamp Pack with Tool includes commonly used clamp sizes and the installation tool.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 in the continental U.S.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help choosing the correct fuel-line parts?
Contact Pro Marine
Phone: 941-721-3000


Searchable Part Numbers & Terms

375, MPI 375, 3/8 fuel hose, 3/8 marine fuel hose, 3/8 boat fuel line, 3/8 outboard fuel hose, Type B marine fuel hose, Type B fuel line, marine fuel line by the foot, bulk marine fuel hose, above deck fuel hose, Oetiker 4-185, 4-185 fuel hose clamp, 8005, Pro Marine 8005, 3/8 primer bulb, marine primer bulb, outboard primer bulb, 375-1, 3/8 Type A fuel hose, marine fuel hose, outboard fuel line, boat fuel hose

Item#:
375
Manufacturer:
Sierra
Available:
In Stock
Your Price:
2.43
Foot
Item#:
ATC3
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
Item#:
ATC5
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
4.06
Pack
min to max 33-57mm/ 1.29-2.22" 316 Stainless Steel
Item#:
4-9
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
2.12
Pack
min to max 91-114mm/3.55-4.45" 316 Stainless Steel
Item#:
4-18
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
2.85
Pack
Item#:
286R
Cross Reference#:
850896
Manufacturer Item:
54-850896
Manufacturer:
TH Marine
Available:
Out of Stock
Your Price:
1.25
Each
This item is discontinued
1/4" Diameter x 1 1/4" Long
Item#:
AGC5
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
9.26
Pack
|◀ ◀ 2341 - 2352 of 2557 ▶ ▶|
View: