S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Johnson, Evinrude & E-TEC Outboard Parts
Shop Johnson, Evinrude, and E-TEC outboard motor parts by system, including cooling, fuel delivery, electrical, engine rebuild components, and lower unit parts. Browse OEM and replacement marine parts for maintenance, repair, and rebuild projects.
Shop by System
- Complete Powerheads
- Control Cables & Control Boxes
- Cooling System Parts
- Cowlings & Components
- Electrical System Parts
- Engine Oil
- Engine Rebuild Kits
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service Manuals
- Steering Systems
- Throttle Components
- Transom & Midsection
- Trim System
Common Johnson, Evinrude & E-TEC Model References
This category supports many popular Johnson and Evinrude outboards, including E-TEC models across a wide horsepower range. Always confirm model and serial number for best fitment.
- Small Outboards: 2HP–30HP (2-stroke & 4-stroke)
- Midrange: 35HP–90HP (carbureted & EFI)
- V4 / V6 Ranges: 115HP, 135HP, 140HP, 150HP, 175HP
- High Horsepower: 200HP, 225HP, 250HP, 300HP (including E-TEC models)
- Platforms: Carbureted, Ficht/FFI, and E-TEC Direct Injection
Always confirm your exact horsepower, model year, and serial number to ensure proper part compatibility before ordering.
392910
396576
5006664
9-53414
Engine Rebuild Kit 1120K OMC Johnson Evinrude 40-60 HP 2-Cylinder (.020 Over)
The Pro Marine 1120K Engine Rebuild Kit includes the major internal components required to rebuild Johnson and Evinrude 2-cylinder outboard engines in the 40-60 horsepower range.
This .020 over bore rebuild kit is designed for engines that have been machined oversize and use a 3.207" cylinder bore. The kit includes oversize pistons, rod bearings, crankshaft bearings, seals, and a complete powerhead gasket set required for a full engine rebuild.
Compatibility
This rebuild kit fits select Johnson and Evinrude 2-cylinder 2-stroke outboard engines in the 40-60 HP range.
| Brand | Application | HP / Engine | Fuel System | Notes |
|---|---|---|---|---|
| Johnson | Outboard | 40-60 HP | Carbureted | 2 Cylinder 2-Stroke .020 Over (3.207" Bore) |
| Evinrude | Outboard | 40-60 HP | Carbureted | 2 Cylinder 2-Stroke .020 Over (3.207" Bore) |
Application Chart
| Brand | Engine Type | Horsepower | Cylinders | Bore |
|---|---|---|---|---|
| Johnson | Outboard | 40 HP | 2 Cylinder | 3.207" |
| Johnson | Outboard | 50 HP | 2 Cylinder | 3.207" |
| Johnson | Outboard | 55 HP | 2 Cylinder | 3.207" |
| Johnson | Outboard | 60 HP | 2 Cylinder | 3.207" |
| Evinrude | Outboard | 40 HP | 2 Cylinder | 3.207" |
| Evinrude | Outboard | 50 HP | 2 Cylinder | 3.207" |
| Evinrude | Outboard | 55 HP | 2 Cylinder | 3.207" |
| Evinrude | Outboard | 60 HP | 2 Cylinder | 3.207" |
Engine Model Compatibility
This rebuild kit fits many Johnson and Evinrude 2-cylinder outboards using the .020 over (3.207") bore powerhead.
- J40ELCTS
- J40TLCTS
- J40ELCRD
- J40TLCRD
- J50ELCTS
- J50TLCTS
- J50ELCRD
- J50TLCRD
- E50ESL
- E50TEL
- J60ELCTS
- J60TLCTS
- J60ELCRD
- J60TLCRD
- E60ESL
- E60TLCOS
Johnson and Evinrude model numbers vary depending on shaft length, trim configuration, steering configuration, and production year. Always verify your engine model number before ordering parts.
What Is Included
- .020 Over pistons
- Piston ring sets
- Wrist pins
- Piston circlips
- Rod bearings
- Upper main crankshaft bearing
- Center main crankshaft bearing
- Lower main crankshaft bearing
- Complete powerhead gasket set
- Oil seals
- O-rings
- Intake gaskets
- Exhaust gaskets
- Cylinder head gaskets
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 1120K |
What This Kit Is Used For
The 1120K rebuild kit is used when rebuilding Johnson and Evinrude 2-stroke outboards that have been bored .020 over to repair cylinder wear or damage.
Replacing pistons, bearings, gaskets, and seals during a powerhead rebuild restores compression and reliability while extending engine life.
FAQ
What engines does this rebuild kit fit?
Johnson and Evinrude 40-60 HP 2-cylinder outboards bored .020 over.
What does .020 over mean?
It indicates the cylinders have been machined .020 inches larger than the standard bore to repair cylinder wear.
Does the kit include pistons and rings?
Yes. Oversize pistons, piston rings, wrist pins, and circlips are included.
Are crankshaft bearings included?
Yes. Upper, center, and lower crankshaft main bearings are included.
Dealer & Customer Support
Are you a marine repair shop, boat dealer, marina, or parts retailer? Pro Marine offers wholesale pricing and dealer discounts for qualified businesses in the marine industry.
Contact Pro Marine
Phone: 941-721-3000
Contact Us Online
Shipping Information
- Free shipping on orders over $100
- Continental United States
- Ships UPS, USPS, or FedEx
- Orders placed before 5:30 PM EST ship same day
- Typical delivery time is 1-5 business days
Return Policy
Pro Marine accepts returns within 30 days of purchase on new, unused parts in original packaging.
Searchable Part Numbers
Pro Marine Part: 1120K
Common Searches:
Johnson 40 rebuild kit .020 over
Johnson 50 rebuild kit .020 over
Johnson 60 rebuild kit .020 over
Evinrude 40 rebuild kit .020 over
Evinrude 50 rebuild kit .020 over
Evinrude 60 rebuild kit .020 over
OMC 2 cylinder rebuild kit .020 over