S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Engine Rebuild Kit 1530K Johnson Evinrude 90 140 HP V4 1976-1988
The Pro Marine 1530K Engine Rebuild Kit provides the major internal components required to rebuild Johnson and Evinrude V4 crossflow outboard engines produced from 1976 through 1988 in the 90-140 horsepower range.
This .030 over Vertex rebuild kit is designed for engines that have been bored oversize during machine work. The kit includes oversize pistons, rod bearings, crankshaft bearings, seals, and a complete powerhead gasket set required during a full engine rebuild.
Available Bore Size Options
This engine rebuild kit is available in multiple bore sizes depending on your cylinder condition after machining.
| Part Number | Bore Size | Description |
|---|---|---|
| 1500K | Standard | Standard bore rebuild kit for engines that have not been bored oversize |
| 1520K | .020 Over | For engines bored .020 inches oversize during cylinder machining |
| 1530K | .030 Over | For engines bored .030 inches oversize during cylinder machining |
Always confirm the final cylinder bore size with your machine shop before ordering pistons or rebuild kits.
Compatibility
This rebuild kit fits Johnson and Evinrude V4 crossflow 2-stroke outboard engines produced from 1976-1988 in the 90-140 HP range.
| Brand | Application | HP Engine | Fuel System | Notes |
|---|---|---|---|---|
| Johnson | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
| Evinrude | Outboard | 90-140 HP | Carbureted | V4 Crossflow 2 Stroke 1976-1988 |
Application Chart
| Brand | Engine Type | Horsepower | Cylinders | Engine Family |
|---|---|---|---|---|
| Johnson | Outboard | 90 HP | V4 | Crossflow |
| Johnson | Outboard | 100 HP | V4 | Crossflow |
| Johnson | Outboard | 115 HP | V4 | Crossflow |
| Johnson | Outboard | 140 HP | V4 | Crossflow |
| Evinrude | Outboard | 90 HP | V4 | Crossflow |
| Evinrude | Outboard | 100 HP | V4 | Crossflow |
| Evinrude | Outboard | 115 HP | V4 | Crossflow |
| Evinrude | Outboard | 140 HP | V4 | Crossflow |
Engine Model Compatibility
This rebuild kit fits many Johnson and Evinrude V4 crossflow outboards produced between 1976 and 1988.
- J90ELCTS
- J90TLCTS
- J100ELCTS
- J100TLCTS
- J115ELCTS
- J115TLCTS
- J140ELCTS
- J140TLCTS
- E90TLCTS
- E100TLCTS
- E115TLCTS
- E140TLCTS
What Is Included
- .030 over Vertex pistons
- Piston ring sets
- Wrist pins
- Piston circlips
- Rod bearings
- Upper main crankshaft bearing
- Center main crankshaft bearings
- Lower main crankshaft bearing
- Complete powerhead gasket set
- Oil seals
- O rings
- Intake gaskets
- Exhaust gaskets
- Cylinder head gaskets
Part Numbers and Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 1530K |
What This Kit Is Used For
The 1530K rebuild kit is used when rebuilding Johnson and Evinrude V4 crossflow outboards that have been bored .030 oversize during cylinder machining.
Replacing pistons, bearings, gaskets, and seals during a powerhead rebuild restores compression and engine reliability while extending engine life.
FAQ
What engines does this rebuild kit fit?
Johnson and Evinrude 90-140 HP V4 crossflow outboards produced between 1976 and 1988.
What does .030 over mean?
It means the cylinders have been machined .030 inches larger than the original bore and require oversize pistons.
Does this kit include pistons and rings?
Yes. Vertex pistons, piston rings, wrist pins, and circlips are included.
Are crankshaft bearings included?
Yes. Upper, center, and lower crankshaft main bearings are included.
Dealer Discounts
Are you in the marine industry? Pro Marine offers wholesale pricing and dealer discounts for marine repair shops, boat dealers, marinas, and parts retailers.
If your business regularly purchases outboard engine parts, we invite you to apply for a Pro Marine dealer account.
Contact Pro Marine
Phone 941-721-3000
Contact Us Online
Shipping Policy
- Free shipping on orders over $100
- Continental United States only
- Orders ship via UPS USPS or FedEx
- Orders placed before 5:30 PM EST typically ship the same day
- Most deliveries arrive within 1-5 business days
Searchable Part Numbers
Pro Marine Part
1530K
Common Searches
Johnson 90 rebuild kit .030
Johnson 100 rebuild kit .030
Johnson 115 rebuild kit .030
Johnson 140 rebuild kit .030
Evinrude 90 rebuild kit .030
Evinrude 115 rebuild kit .030
Evinrude 140 rebuild kit .030
OMC V4 rebuild kit .030
Engine Rebuild Kit 1130K OMC Johnson Evinrude 40-60 HP 2-Cylinder (.030 Over)
The Pro Marine 1130K Engine Rebuild Kit includes the major internal components required to rebuild Johnson and Evinrude 2-cylinder outboard engines in the 40-60 horsepower range.
This .030 over bore rebuild kit is designed for engines that have been machined oversize and use a 3.217" cylinder bore. The kit includes oversize pistons, rod bearings, crankshaft bearings, seals, and a complete powerhead gasket set required for a full engine rebuild.
Compatibility
This rebuild kit fits select Johnson and Evinrude 2-cylinder 2-stroke outboard engines in the 40-60 HP range.
| Brand | Application | HP / Engine | Fuel System | Notes |
|---|---|---|---|---|
| Johnson | Outboard | 40-60 HP | Carbureted | 2 Cylinder 2-Stroke .030 Over (3.217" Bore) |
| Evinrude | Outboard | 40-60 HP | Carbureted | 2 Cylinder 2-Stroke .030 Over (3.217" Bore) |
Application Chart
| Brand | Engine Type | Horsepower | Cylinders | Bore |
|---|---|---|---|---|
| Johnson | Outboard | 40 HP | 2 Cylinder | 3.217" |
| Johnson | Outboard | 50 HP | 2 Cylinder | 3.217" |
| Johnson | Outboard | 55 HP | 2 Cylinder | 3.217" |
| Johnson | Outboard | 60 HP | 2 Cylinder | 3.217" |
| Evinrude | Outboard | 40 HP | 2 Cylinder | 3.217" |
| Evinrude | Outboard | 50 HP | 2 Cylinder | 3.217" |
| Evinrude | Outboard | 55 HP | 2 Cylinder | 3.217" |
| Evinrude | Outboard | 60 HP | 2 Cylinder | 3.217" |
Engine Model Compatibility
This rebuild kit fits many Johnson and Evinrude 2-cylinder outboards using the .030 over (3.217") bore powerhead.
- J40ELCTS
- J40TLCTS
- J40ELCRD
- J40TLCRD
- J50ELCTS
- J50TLCTS
- J50ELCRD
- J50TLCRD
- E50ESL
- E50TEL
- J60ELCTS
- J60TLCTS
- J60ELCRD
- J60TLCRD
- E60ESL
- E60TLCOS
Johnson and Evinrude model numbers vary depending on shaft length, trim configuration, steering configuration, and production year. Always verify your engine model number before ordering parts.
What Is Included
- .030 Over pistons
- Piston ring sets
- Wrist pins
- Piston circlips
- Rod bearings
- Upper main crankshaft bearing
- Center main crankshaft bearing
- Lower main crankshaft bearing
- Complete powerhead gasket set
- Oil seals
- O-rings
- Intake gaskets
- Exhaust gaskets
- Cylinder head gaskets
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 1130K |
What This Kit Is Used For
The 1130K rebuild kit is used when rebuilding Johnson and Evinrude 2-stroke outboards that have been bored .030 over to repair cylinder wear or damage.
Replacing pistons, bearings, gaskets, and seals during a powerhead rebuild restores compression and reliability while extending engine life.
FAQ
What engines does this rebuild kit fit?
Johnson and Evinrude 40-60 HP 2-cylinder outboards bored .030 over.
What does .030 over mean?
It indicates the cylinders have been machined .030 inches larger than the standard bore to repair cylinder wear.
Does the kit include pistons and rings?
Yes. Oversize pistons, piston rings, wrist pins, and circlips are included.
Are crankshaft bearings included?
Yes. Upper, center, and lower crankshaft main bearings are included.
Dealer & Customer Support
Are you a marine repair shop, boat dealer, marina, or parts retailer? Pro Marine offers wholesale pricing and dealer discounts for qualified businesses in the marine industry.
If you work in the marine industry and regularly purchase outboard engine parts, we invite you to apply for a Pro Marine Dealer Account.
Contact Pro Marine
Phone: 941-721-3000
Contact Us Online
Shipping Information
- Free shipping on orders over $100
- Continental United States
- Ships UPS, USPS, or FedEx
- Orders placed before 5:30 PM EST ship same day
- Typical delivery time is 1-5 business days
Return Policy
Pro Marine accepts returns within 30 days of purchase on new, unused parts in original packaging.
Searchable Part Numbers
Pro Marine Part: 1130K
Common Searches:
Johnson 40 rebuild kit .030 over
Johnson 50 rebuild kit .030 over
Johnson 60 rebuild kit .030 over
Evinrude 40 rebuild kit .030 over
Evinrude 50 rebuild kit .030 over
Evinrude 60 rebuild kit .030 over
OMC 2 cylinder rebuild kit .030 over
This Pro Marine 1520K engine rebuild kit is designed for Johnson and Evinrude 90 HP through 140 HP V4 crossflow outboard engines produced from 1976 through 1988. This version of the kit includes .020 inch oversize pistons for engines that have had the cylinders bored during machining.
These OMC V4 crossflow engines are widely used on fishing boats and recreational boats and are known for their durability and strong mid range torque. This rebuild kit provides the major internal components needed to restore compression, reliability, and performance when rebuilding a worn or damaged powerhead.
Available Bore Size Options
This engine rebuild kit is available in multiple bore sizes depending on your cylinder condition after machining.
| Part Number | Bore Size | Description |
|---|---|---|
| 1500K | Standard | Standard bore rebuild kit for engines that have not been bored oversize |
| 1520K | .020 Over | For engines bored .020 inches oversize during cylinder machining |
| 1530K | .030 Over | For engines bored .030 inches oversize during cylinder machining |
Always confirm the final cylinder bore size with your machine shop before ordering pistons or rebuild kits.
Compatibility
This rebuild kit fits Johnson and Evinrude V4 crossflow outboard engines rated between 90 HP and 140 HP produced from 1976 through 1988. These engines use a 3.500 inch bore crossflow block and were commonly installed on bass boats, fishing boats, and recreational runabouts.
Application Chart
| Brand | Horsepower | Engine Type | Year Range |
|---|---|---|---|
| Johnson | 90 HP | V4 Crossflow | 1976-1988 |
| Johnson | 115 HP | V4 Crossflow | 1976-1988 |
| Johnson | 140 HP | V4 Crossflow | 1976-1988 |
| Evinrude | 90 HP | V4 Crossflow | 1976-1988 |
| Evinrude | 115 HP | V4 Crossflow | 1976-1988 |
| Evinrude | 140 HP | V4 Crossflow | 1976-1988 |
Engine Model Compatibility
This kit fits OMC V4 crossflow engines with a 3.500 inch cylinder bore. The included pistons are .020 inch oversize and are intended for engines that have been bored during cylinder machining.
What Is Included
Part Numbers and Cross References
Common cross reference numbers associated with this rebuild kit include:
What This Kit Is Used For
This rebuild kit is used during a complete powerhead rebuild on Johnson or Evinrude V4 crossflow outboard engines. It is typically installed when engines require cylinder boring, new pistons, and full internal service due to low compression, piston damage, or high engine hours.
Marine repair shops and engine builders frequently use these kits when restoring classic OMC crossflow engines to reliable running condition.
FAQ
What does .020 over mean?
What engines does this rebuild kit fit?
Does this kit include pistons?
Should I confirm bore size before ordering?
Dealer Discounts
Are you in the marine industry? Pro Marine offers wholesale pricing and dealer discounts for marine repair shops, boat dealers, marinas, and parts retailers.
If your business regularly purchases outboard engine parts, we invite you to apply for a Pro Marine dealer account.
Contact Pro Marine
Shipping Policy
Searchable Part Numbers
Pro Marine Part
Common Searches