S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
Genuine Suzuki Marine OEM Part
Suzuki 09280-22019 OEM Internal Anode Cover O-Ring
The Suzuki 09280-22019 Anode Cover O-Ring is a genuine OEM sealing O-ring used with the internal corrosion-protection anodes found on a wide range of Suzuki four-stroke outboards.
This O-ring seals the removable internal anode cover and also cross-references to Johnson / Evinrude 5035305 for select Suzuki-built four-stroke outboards.
Part Type: Internal Anode Cover O-Ring
Manufacturer: Suzuki Marine
OEM or Aftermarket: Genuine OEM
Application: Internal Engine Anode Cover
Suzuki Part #: 09280-22019
Johnson / Evinrude Cross Reference: 5035305
OEM and Cross Reference Numbers
| Part Number | Brand | Reference |
|---|---|---|
| 09280-22019 | Suzuki Marine | OEM Part Number |
| 5035305 | Johnson / Evinrude | Cross Reference |
| 22019 | Pro Marine | Aftermarket Alternative |
What This Part is Used For
Suzuki four-stroke outboards use internal sacrificial anodes on many engine families as part of the engine's corrosion-protection system. These anodes are installed behind removable covers in the engine.
The 09280-22019 O-ring seals the internal anode cover. Maintaining this seal helps prevent leakage around the cover after an internal anode has been inspected or replaced.
Because the O-ring must be disturbed when accessing the anode, it should be inspected during internal anode service and replaced when it shows flattening, cuts, hardening, stretching, or other deterioration.
Inspect both the internal anode and its sealing O-ring whenever the anode cover is removed.
The anode and O-ring are sold separately, and the number required varies depending on the specific Suzuki engine model.
Compatible Applications
Suzuki 09280-22019 is used across a large range of Suzuki DF four-stroke outboards. Catalog application data includes the following engine families:
| Manufacturer | Engine Family | Applications |
|---|---|---|
| Suzuki | DF5-DF30 | Select DF5A, DF8A, DF9.9A/B, DF15A, DF20A, DF25/DF25A and DF30A applications |
| Suzuki | DF40-DF60 | DF40, DF40A, DF50, DF50A and DF60A families including applicable T, TH, QH, S and V variants |
| Suzuki | DF70-DF100 | Select DF70A, DF75A, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C applications |
| Suzuki | DF115-DF140 | DF115, DF115A/B/BG and DF140, DF140A/B/BG families including applicable T, Z, S and G variants |
| Suzuki | DF150-DF200 | DF150, DF150A/AP, DF175, DF175A/AP, DF200 and DF200A/AP families |
| Suzuki | DF225-DF300 | DF225, DF250, DF250A/AP, DF300, DF300A/AP and applicable T, Z, S and SS variants |
| Suzuki | DF300B-DF350A | Select DF300B, DF325A and DF350A applications including applicable MD variants |
| Johnson / Evinrude | 25-225 HP Four-Stroke | Select Suzuki-built Johnson / Evinrude four-stroke applications using cross reference 5035305 |
Suzuki 09280-22019 is used across numerous engine families, but the number of internal anodes and O-rings required varies by engine model.
Verify your engine model and serial number when confirming fitment and determining the quantity required for a complete internal anode service.
Matching Internal Zinc Anode
55321-87J10P Internal Zinc Anode
If you are replacing the O-ring as part of an internal anode service, inspect the corrosion-protection anode at the same time.
Pro Marine 55321-87J10P is a replacement zinc anode used with this style of internal anode cover on many compatible Suzuki four-stroke applications.
View 55321-87J10P Zinc AnodePro Marine Aftermarket Alternative
Pro Marine 22019 Anode Cover O-Ring
Looking for a cost-effective alternative to the genuine Suzuki O-ring? Pro Marine 22019 is the aftermarket replacement for Suzuki 09280-22019.
View Pro Marine 22019Installation and Service Tips
- Inspect the O-ring whenever an internal anode cover is removed.
- Replace an O-ring that is flattened, cut, hardened, stretched, or otherwise damaged.
- Inspect the internal corrosion-protection anode during the same service.
- Determine the correct quantity of O-rings and anodes for your specific engine before ordering.
- Clean the O-ring sealing surfaces before installation.
- Make sure the replacement O-ring is properly seated before reinstalling the cover.
- Follow the Suzuki service procedure and specified fastener torque for your engine.
Key Features and Benefits
- Genuine Suzuki OEM: Original Suzuki Marine replacement part 09280-22019.
- Internal Anode Seal: Designed for the removable covers protecting compatible internal engine anodes.
- Broad Suzuki Application: Cataloged across numerous Suzuki DF four-stroke engine families.
- Johnson / Evinrude Cross Reference: Cross-references to 5035305 for select Suzuki-built four-stroke applications.
- Matching Anode Available: Pro Marine 55321-87J10P zinc anodes are available separately.
- Aftermarket Option Available: Pro Marine 22019 offers an alternative to the OEM Suzuki O-ring.
FAQ
What is Suzuki 09280-22019?
Suzuki 09280-22019 is a genuine OEM O-ring used to seal an internal engine anode cover on compatible Suzuki four-stroke outboards.
What does Suzuki 09280-22019 cross-reference to?
The supplied application data cross-references Suzuki 09280-22019 to Johnson / Evinrude 5035305.
What anode is used with this O-ring?
Pro Marine stocks 55321-87J10P zinc anodes for the corresponding internal-anode application on many compatible Suzuki outboards.
Is there an aftermarket replacement for 09280-22019?
Yes. Pro Marine 22019 is available as an aftermarket alternative to the genuine Suzuki O-ring.
Should the O-ring be replaced when servicing an internal anode?
Inspect the O-ring whenever the anode cover is removed. Replace it if it is cut, flattened, hardened, stretched, or otherwise damaged.
How many 09280-22019 O-rings does my Suzuki need?
The required quantity varies by engine. Some engines use multiple internal anodes and covers. Check your exact model and serial number to determine the correct quantity.
Does 09280-22019 fit Johnson and Evinrude outboards?
The supplied application data includes select Suzuki-built Johnson / Evinrude four-stroke outboards under cross reference 5035305. Verify your exact model before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or determining how many O-rings and anodes your Suzuki requires? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
09280-22019, 0928022019, 5035305, 22019, Suzuki 09280-22019, Johnson 5035305, Evinrude 5035305
Searchable Terms
Suzuki OEM anode cover O-ring, Suzuki internal anode O-ring, Suzuki engine anode seal, Suzuki DF anode O-ring, Suzuki DF115 anode O-ring, Suzuki DF140 anode O-ring, Suzuki DF150 anode O-ring, Suzuki DF175 anode O-ring, Suzuki DF200 anode O-ring, Suzuki DF225 anode O-ring, Suzuki DF250 anode O-ring, Suzuki DF300 anode O-ring, Suzuki DF350 anode O-ring, Johnson four stroke anode O-ring, Evinrude four stroke anode O-ring, genuine Suzuki anode O-ring
5035305
6J8-85540-H3-00
6J8-85540-H1-00
DF60 1998-2000
DT65 1995-1997
DF70 1980-2000
DT75 1995-1997
DT85 1995-2000
DT115 1996-2001
DT140 1996-2001
Johnson 60-70hp 4Stroke
38100-99E01-0EP
5030828
5030829
5030830
5031166
60X-W0078-00-00
61A-44311-00-00
61A-44311-01-00
888686T
