S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
F5H211-1
F5H211-2
F5H2111
F5H2112
802878Q30
80287830
81825212
819104A12
819104A6
8191041
81910412
82793330
45176
95703
95704
15412-93J00
18-7936
35-888289T2
5035695
65L-24563-00-00
778162
888289T2
Pro Marine Replacement for Suzuki Internal Engine Anode
Suzuki Anode Cover O-Ring - Replaces 09280-22019 and 5035305
The Pro Marine 22019 Anode Cover O-Ring is a replacement sealing O-ring used with the internal engine anodes found on a wide range of Suzuki four-stroke outboards and related Johnson / Evinrude four-stroke applications.
This O-ring replaces Suzuki 09280-22019 and Johnson / Evinrude 5035305. It seals the internal anode cover and should be inspected whenever the internal protection anode is removed for inspection or replacement.
Part Type: Internal Anode Cover O-Ring
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Application: Internal Engine Anode Cover
Replaces Suzuki: 09280-22019
Replaces Johnson / Evinrude: 5035305
Pro Marine Item #: 22019
OEM and Cross Reference Numbers
| Part Number | Brand / Reference | Description |
|---|---|---|
| 22019 | Pro Marine | Aftermarket Anode Cover O-Ring |
| 09280-22019 | Suzuki OEM | O-Ring, Anode Cover |
| 5035305 | Johnson / Evinrude | Cross Reference |
What This Part is Used For
Many Suzuki four-stroke outboards use replaceable internal engine anodes as part of the engine's corrosion-protection system. The anode installs behind a removable cover, and the 09280-22019 O-ring seals that cover.
When an internal anode is inspected or replaced, the O-ring should also be inspected for flattening, cuts, deterioration, or other damage that could prevent the cover from sealing correctly.
Pro Marine 22019 provides an aftermarket replacement for the original Suzuki 09280-22019 O-ring and the corresponding Johnson / Evinrude 5035305 application.
The O-ring and internal zinc anode are separate service components. If you are removing the anode cover for service, inspect both the anode and sealing O-ring before reassembly.
Compatible Applications
Pro Marine 22019 / Suzuki 09280-22019 appears across a large range of Suzuki four-stroke applications. Fitment includes the following engine families:
| Manufacturer | Engine Family | Common Variants / Applications |
|---|---|---|
| Suzuki | DF5-DF30 | Select DF5A, DF8A, DF9.9A/B, DF15A, DF20A, DF25/25A and DF30A applications |
| Suzuki | DF40-DF60 | DF40, DF40A, DF50, DF50A and DF60A families including applicable T, TH, QH, S and V variants |
| Suzuki | DF70-DF100 | Select DF70A, DF75A, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C applications |
| Suzuki | DF115-DF140 | DF115, DF115A/B/BG and DF140, DF140A/B/BG families including applicable T, Z, S and G variants |
| Suzuki | DF150-DF200 | DF150, DF150A/AP, DF175, DF175A/AP, DF200 and DF200A/AP families |
| Suzuki | DF225-DF300 | DF225, DF250, DF250A/AP, DF300, DF300A/AP and applicable T, Z, S and SS variants |
| Suzuki | DF300B-DF350A | Select DF300B, DF325A and DF350A applications including applicable MD variants |
| Johnson / Evinrude | 25-225 HP Four-Stroke | Select Suzuki-built Johnson / Evinrude four-stroke applications using cross reference 5035305 |
This O-ring is used across many different Suzuki engine families, but the number of internal anodes and O-rings required per engine varies by model.
Verify your engine model and serial number when determining both fitment and the quantity required for a complete internal anode service.
OEM Suzuki Version Available
Suzuki OEM 09280-22019 Anode Cover O-Ring
Prefer the genuine Suzuki component? Pro Marine USA also stocks the OEM Suzuki 09280-22019 anode cover O-ring for the same application.
View OEM Suzuki 09280-22019Don't Forget the Internal Zinc Anode
55321-87J10P Internal Zinc Anode
Servicing the internal engine anodes? The 55321-87J10P zinc anode is used with this style of anode cover O-ring on many Suzuki four-stroke applications.
Inspect the anode whenever the cover is removed and replace anodes that have reached their service limit or show excessive deterioration.
View 55321-87J10P Zinc AnodeInstallation and Service Tips
- Inspect the internal anode O-ring whenever the anode cover is removed.
- Replace O-rings that are cut, flattened, hardened, stretched, or otherwise damaged.
- Inspect the internal zinc anode at the same time.
- Confirm the number of anodes and O-rings required for your specific engine before ordering.
- Clean the sealing surfaces before installing the replacement O-ring.
- Make sure the O-ring is correctly seated before reinstalling the anode cover.
- Follow the Suzuki service procedure and specified fastener torque for your engine model.
Key Features and Benefits
- Direct Replacement: Replaces Suzuki 09280-22019 and Johnson / Evinrude 5035305.
- Internal Anode Service: Seals the removable cover used to access the internal corrosion-protection anode.
- Broad Suzuki Application: Used across numerous Suzuki DF four-stroke engine families.
- Johnson / Evinrude Applications: Also cross-references to select Suzuki-built Johnson / Evinrude four-stroke outboards.
- OEM Option Available: Genuine Suzuki 09280-22019 is also available from Pro Marine USA.
- Matching Anode Available: 55321-87J10P zinc anodes can be ordered at the same time for internal anode service.
FAQ
What does Pro Marine 22019 replace?
Pro Marine 22019 replaces Suzuki 09280-22019 and cross-references to Johnson / Evinrude 5035305.
What is the 09280-22019 O-ring used for?
It seals the cover used to access an internal corrosion-protection anode on compatible Suzuki and related Johnson / Evinrude four-stroke outboards.
Does Pro Marine carry the OEM Suzuki version?
Yes. Genuine Suzuki 09280-22019 is also available separately from Pro Marine USA.
What anode goes with this O-ring?
Pro Marine stocks 55321-87J10P zinc anodes used with this internal-anode arrangement on many compatible Suzuki applications.
Should I replace the O-ring when replacing an internal anode?
The O-ring should be inspected whenever the cover is removed. Replace it if it is flattened, hardened, cut, stretched, or otherwise damaged.
How many O-rings does my Suzuki outboard require?
The quantity varies by engine model. Some Suzuki engines use multiple internal anodes and therefore require multiple O-rings during a complete anode service. Verify the quantity for your specific model and serial number.
Does this fit Johnson and Evinrude four-stroke outboards?
Yes, select Suzuki-built Johnson / Evinrude four-stroke applications use cross reference 5035305. Verify your exact model before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or determining how many O-rings and anodes your engine requires? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
22019, 09280-22019, 0928022019, 5035305, Suzuki 09280-22019, Johnson 5035305, Evinrude 5035305
Searchable Terms
Suzuki anode cover O-ring, Suzuki internal anode O-ring, Suzuki engine anode seal, Suzuki DF anode O-ring, Suzuki DF115 anode O-ring, Suzuki DF140 anode O-ring, Suzuki DF150 anode O-ring, Suzuki DF175 anode O-ring, Suzuki DF200 anode O-ring, Suzuki DF225 anode O-ring, Suzuki DF250 anode O-ring, Suzuki DF300 anode O-ring, Suzuki DF350 anode O-ring, Johnson four stroke anode O-ring, Evinrude four stroke anode O-ring, Suzuki internal zinc anode seal
5035305