S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
9787A2
9787A3
9787A5
69J-24502-00-00
9-51406
93310-836U0-00
93310-836V2-00
16911-ZY3-000
16911-ZY3-010
93310-840V5-00
93310-840V8-00
93310-84106-00
41620A1
879877A1
91866A1
6D8-41114-A0-00
67F-41114-A0-00
67F-41114-A1-00
67F-41114-A2-00
804076
804076001
804076003
Pro Marine Single-Engine Side Mount Control
Johnson Evinrude E-TEC Single Engine Side Mount Control - 4-5006180
Pro Marine 4-5006180 is a complete single-engine surface side-mount remote control for compatible Johnson, Evinrude and Evinrude E-TEC outboard applications using the traditional mechanical shift and throttle control system.
The control combines throttle, shift, ignition, power trim, engine cut-off safety switch and warning functions into one convenient side-mount control assembly.
Pro Marine 4-5006180 replaces numerous Johnson / Evinrude / OMC / BRP control numbers including 0175944, 0176380, 0176381, 0177217, 0177218, 0177224, 0177225, 0434057, 5006180 and 5006181.
Part Type: Single Engine Side Mount Remote Control
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Application: Johnson / Evinrude / E-TEC Outboards
Control Type: Mechanical Shift and Throttle
Mounting: Surface Side Mount
Manufacturer Item #: 5006180
Pro Marine Item #: 4-5006180
Compatible Applications
Pro Marine 4-5006180 is designed for many Johnson, Evinrude and Evinrude E-TEC single-engine installations using compatible BRP / OMC mechanical throttle and shift rigging.
The BRP control design represented by OEM number 5006180 is intended as a direct-style control for many 1996 and newer Johnson / Evinrude applications.
| Application | Compatibility | Notes |
|---|---|---|
| Johnson / Evinrude | 1996 and Newer | Compatible mechanical-control applications |
| Evinrude E-TEC | Compatible Mechanical-Control Models | Used with compatible SystemCheck / BRP mechanical rigging |
| Johnson / Evinrude | 1973-1995 | May require adapter harness and additional trim harness |
This control is selected by the engine's rigging system, wiring harness and control-cable configuration, not simply by horsepower.
For many 1996 and newer Johnson, Evinrude and mechanically controlled E-TEC applications, this control matches the 5006180-style BRP control system.
Earlier 1973-1995 Johnson and Evinrude engines may use this control with the correct adapter harness and additional trim wiring.
Always verify the existing control, engine wiring and OEM control number before ordering.
Supplied Johnson and Evinrude Fitment
The supplied application information includes a very large number of Johnson and Evinrude model-number applications as well as dedicated Remote Control, Electrical and Instruments/Rigging application listings.
The supplied catalog data contains engine applications across numerous horsepower families and includes remote-control listings through 2000.
Because the control can be used across many engine families, matching the control system and wiring configuration is more reliable than selecting the control by horsepower alone.
OEM and Cross Reference Numbers
Pro Marine 4-5006180 replaces or cross-references the following Johnson, Evinrude, OMC and BRP control numbers.
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 4-5006180 |
| BRP / Johnson / Evinrude | 5006180 |
| BRP / Johnson / Evinrude | 5006181 |
| Johnson / Evinrude / OMC | 0175944 / 175944 |
| Johnson / Evinrude / OMC | 0176380 / 176380 |
| Johnson / Evinrude / OMC | 0176381 / 176381 |
| Johnson / Evinrude / OMC | 0177217 / 177217 |
| Johnson / Evinrude / OMC | 0177218 / 177218 |
| Johnson / Evinrude / OMC | 0177224 / 177224 |
| Johnson / Evinrude / OMC | 0177225 / 177225 |
| Johnson / Evinrude / OMC | 0434057 / 434057 |
What is Included in the Control
This side-mount control combines the primary helm controls needed for a compatible single-engine Johnson, Evinrude or E-TEC installation.
- Single-lever throttle and shift control
- Push-to-prime ignition switch
- Thumb-operated power trim and tilt switch in the handle
- Engine emergency cut-off switch
- Safety lanyard
- Warning horn
- Neutral lock
- Start-in-gear prevention
- Adjustable throttle friction
What This Control is Used For
The side-mount control is the operator's primary interface with a mechanically controlled outboard.
Moving the control lever operates both the throttle and shift systems, allowing the operator to select forward, neutral and reverse while controlling engine speed.
The integrated ignition switch starts and stops the engine, while the trim switch in the handle lets the operator adjust engine trim without removing a hand from the control lever.
The integrated engine cut-off switch and safety lanyard add an important safety function at the helm.
Port or Starboard Side Mounting
The 5006180-style surface control is designed so it can be installed on either the port or starboard side of a compatible helm or console installation.
This makes it useful for a wide range of center-console, side-console and other single-engine boat layouts.
Control Cable Compatibility
The 5006180-style control uses the later Johnson/Evinrude mechanical control-cable system used on post-1979 applications.
Pro Marine stocks compatible Johnson/Evinrude-style control cables for many 1979 and newer mechanical-control applications.
Using This Control on Older Johnson and Evinrude Engines
Earlier Johnson and Evinrude engines may use different electrical connectors even though the mechanical shift and throttle system can be compatible with this style of control.
Published BRP application information indicates that 1973-1995 Johnson and Evinrude engines require an adapter harness and additional trim harness when converting to the later 5006180-style control.
Finding your old control number in the cross-reference list is a good starting point, but inspect the engine harness and trim wiring before installation.
Older Johnson/Evinrude engines may require additional wiring adapters to connect to the newer control assembly.
Evinrude E-TEC Applications
BRP used the 5006180 surface side-mount control within compatible SystemCheck mechanical rigging systems, including Evinrude E-TEC rigging applications.
This control should be used only where the E-TEC engine is configured for the compatible mechanical shift/throttle and BRP control-harness system. It should not be selected for an electronically controlled engine solely because the engine carries the E-TEC name.
Common Reasons to Replace a Side Mount Control
- Worn or excessively loose control lever
- Damaged throttle or shift mechanism
- Failed ignition switch
- Failed trim switch
- Damaged control wiring or harness
- Broken neutral-lock mechanism
- Corrosion or internal wear in an older control box
- Converting an older Johnson/Evinrude control to a later-style assembly
- Complete boat rerigging or restoration
Installation Tips
- Verify the original control part number before ordering.
- Confirm the engine uses mechanical throttle and shift cables.
- Verify engine-harness connector compatibility.
- Determine whether an adapter harness is needed on an older engine.
- Confirm power-trim wiring compatibility before installation.
- Inspect existing control cables and replace worn or stiff cables.
- Route cables with smooth bends and avoid tight radius bends.
- Check full forward, neutral and reverse operation after installation.
- Verify neutral-start protection before operating the boat.
- Test power trim, ignition, warning horn and engine cut-off functions.
Key Features and Benefits
- Pro Marine aftermarket single-engine side mount control
- Replaces BRP / Johnson / Evinrude 5006180
- Designed for compatible mechanical-control outboards
- Fits many Johnson, Evinrude and Evinrude E-TEC applications
- Surface side-mount design
- Can be mounted on port or starboard side
- Integrated ignition switch
- Push-to-prime starting function
- Thumb-operated trim switch
- Emergency engine cut-off switch and lanyard
- Warning horn included
- Neutral lock
- Start-in-gear prevention
- Adjustable throttle friction
- Extensive OEM cross-reference coverage
FAQ
What is Pro Marine 4-5006180?
It is a single-engine surface side-mount remote control
for compatible Johnson, Evinrude and Evinrude E-TEC mechanical-control
outboards.
What does 4-5006180 replace?
It crosses to Johnson/Evinrude/BRP numbers
0175944, 0176380, 0176381, 0177217, 0177218,
0177224, 0177225, 0434057, 5006180 and 5006181.
Does this control fit Evinrude E-TEC engines?
It fits compatible E-TEC applications using the appropriate
mechanical shift/throttle and BRP/SystemCheck control
configuration. Verify the specific engine rigging system before
ordering.
Does it fit Johnson and Evinrude engines before 1996?
Earlier engines may be mechanically compatible, but published BRP
application information indicates that 1973-1995 engines require
an adapter harness and additional trim harness when using this
later-style control.
Does this include an ignition switch?
Yes. The control includes an integrated
push-to-prime ignition switch.
Does this control have a trim switch?
Yes. A thumb-operated power trim switch is integrated into the control
handle.
Does it include a kill-switch lanyard?
Yes. The control includes an engine emergency cut-off switch and safety
lanyard.
Can this be mounted on either side of the boat?
Yes. The 5006180-style surface control can be mounted on either the
port or starboard side in a compatible installation.
Does this use mechanical control cables?
Yes. This is a mechanical throttle and shift control for compatible
Johnson/Evinrude-style control cables.
Will it fit every Johnson, Evinrude or E-TEC engine?
No. Wiring systems, electronic controls and rigging configurations vary.
Verify the original control number, control cables and engine harness
before ordering.
Can this be used on a sterndrive?
No. The 5006180-style BRP side-mount control is intended for compatible
outboard applications and is not specified for sterndrive use.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
4-5006180, 5006180, 5006181, 0175944, 175944, 0176380, 176380, 0176381, 176381, 0177217, 177217, 0177218, 177218, 0177224, 177224, 0177225, 177225, 0434057, 434057
Searchable Terms
Johnson side mount control, Evinrude side mount control, Evinrude E-TEC side mount control, Johnson control box, Evinrude control box, E-TEC control box, BRP side mount control, OMC side mount control, Johnson throttle control, Evinrude throttle control, E-TEC mechanical control, single engine side mount control, outboard throttle shift control, Johnson Evinrude remote control, 5006180 control box, 5006181 control box
0176380
0176381
0177217
0177218
0177224
0177225
0434057
5006180
5006181
0393259
0393988
0394176
0395840
0777785
0778247
0983019
0983304
0983446
0985237
18-6761
387277
393988
394176
582048
582155
584107
777784
777785
778247
8M6007522
8M6007523
8M6007543
8M6014150
802507
802507A1
802508
9-18102
984356
0769300
769300
09482-00649
94702-00437-00
94702-00440-00
970111130
970111130M
0344046
0778291
340653
344046
778291