Z6_GHK6HJC0OG6S20Q8HU3K6R0G63

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5

0 Items

Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7

Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Home > Outboard

Outboard Motor Parts | OEM & Aftermarket

Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.

Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.

Shop Outboard Parts by Manufacturer

Chrysler / Force Outboard Parts for Chrysler and Force outboard repair

Honda Outboard Honda cooling, fuel, electrical, and engine parts

Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts

Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts

Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts

Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts

Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts

Find the Correct Outboard Part

Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.

Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Shop Outboard Parts by Engine System

Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.

Common Outboard Problems and Where to Start

Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.

Why Buy Outboard Parts from Pro Marine USA?

OEM and aftermarket replacement options for major outboard engine brands.
Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
OEM diagram and part-number lookup tools to help identify the correct component before ordering.
Dealer pricing available for qualified marine repair businesses and dealers.
Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.

OEM and Aftermarket Outboard Parts

OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.

Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.

Frequently Asked Questions

How do I find the correct parts for my outboard motor?

Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.

Can I search Pro Marine by OEM part number?

Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

What information should I have before ordering an outboard part?

Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.

What is the difference between OEM and aftermarket outboard parts?

OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.

Are aftermarket outboard motor parts reliable?

Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.

Do you carry parts for older outboard motors?

Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.

What outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.

Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.

|◀ ◀ 4813 - 4824 of 8459 ▶ ▶|

View:

Check Valve, Carburetor OEM

Johnson/Evinrude

Item#:

3929-1

Cross Reference#:

0390436
0392988
0765619
390436
392988
765619

Manufacturer Item:

392988

Manufacturer:

OMC / Bombardier

Available:

In Stock

Your Price:

66.13

Each

Qty:

Oil Seal

Johnson Evinrude Goes in 1773 kit

Item#:

18-0542

Cross Reference#:

0315288
0321831
0777918
315288
315288
321831
777918
878686

Manufacturer Item:

321831

Manufacturer:

Engineered Marine Parts

Available:

In Stock

Your Price:

15.79

Each

Qty:

Poppet Check Valve,Trim & Tilt

Johnson/Evinrude

Item#:

335134

Cross Reference#:

335134

Manufacturer Item:

335134

Manufacturer:

Pro Marine

Available:

In Stock

Your Price:

12.07

Each

Qty:

Fuel Pump, Electrical

Johnson/Evinrude 40-70HP 01-06 Suzuki DF40-70hp 1998-10

Item#:

1-32-5032617

Cross Reference#:

0769462
15200-87J00
15200-87J10
15200-99E00
5031399
5032617
769462

Manufacturer Item:

5032617

Manufacturer:

Pro Marine

Available:

In Stock

Your Price:

154.57

Each

Qty:

Drive Shaft C-Clip

Seadoo All 2 Strokes with Carbon Ring

Item#:

6H414985P

Cross Reference#:

18-7382
6H4-14985-00-00
6H4-14985-01-00
67F-14985-00-00
804184
9-36954

Manufacturer Item:

6H4-14985-01-00

Manufacturer:

Pro Marine

Available:

In Stock

Your Price:

17.72

Each

Qty:

Twin/Dual Engine Control

Mercury Uses Gen 2 Cables

Item#:

8M0075245P

Cross Reference#:

8M0041426
8M0075245
883711A02

Manufacturer Item:

8M0075245

Manufacturer:

Pro Marine

Available:

In Stock

Your Price:

468.12

Each

Qty:

Yamaha 703 10-Pin Side Mount Remote Control 15ft Harness - 4820

Pro Marine Mechanical Control with Push-to-Choke and Power Trim

Pro Marine Yamaha 703 Side Mount Mechanical Control

Yamaha 703 10-Pin Side Mount Remote Control with 15ft Harness - 48207SP

Pro Marine 48207SP is an aftermarket replacement Yamaha 703-style side-mount remote control for compatible Yamaha outboards using mechanical throttle and shift controls.

This control features a 10-pin electrical connection, 15-foot harness, push-to-choke ignition function and power trim and tilt control, providing the major helm-control functions in one side-mount assembly.

Pro Marine 48207SP replaces a large family of Yamaha 703 remote controls, including 703-48201, 703-48205 and 703-48207 series part numbers.

Pro Marine 48207SP Remote Control

Part Type: Side Mount Remote Control Box
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Application: Yamaha Outboard
Control Type: Mechanical Throttle and Shift
Control Family: Yamaha 703 Style
Electrical Connection: 10-Pin
Harness Length: 15 Feet
Ignition: Push-to-Choke
Power Trim and Tilt: Yes
Manufacturer Item #: 703-48207-21-00
Pro Marine Item #: 48207SP

Compatible Applications

Pro Marine 48207SP is designed for compatible Yamaha outboards using the 10-pin Yamaha mechanical-control system.

Pro Marine's application information identifies the following Yamaha engine families for this control:

Yamaha Application	Control System	Connection
Yamaha T8	Mechanical Throttle and Shift	Compatible 10-Pin System
Yamaha F15	Mechanical Throttle and Shift	Compatible 10-Pin System
Yamaha F25-225 HP	Mechanical Throttle and Shift	Compatible 10-Pin System
Yamaha 40-250 HP	Mechanical Throttle and Shift	Compatible 10-Pin System

Important: Mechanical 10-Pin Yamaha Controls Only

Pro Marine 48207SP is designed for compatible Yamaha outboards using mechanical throttle and shift controls with the 10-pin electrical connection.

Do not order this control solely by horsepower. Yamaha used different rigging and control systems across engine families and model years.

Before ordering, verify that your engine uses mechanical throttle and shift cables, a compatible 10-pin harness connection, or that your existing control crosses to one of the Yamaha OEM numbers listed below.

OEM and Cross Reference Numbers

Pro Marine 48207SP replaces a large number of Yamaha 703 side-mount remote-control assemblies. These older and superseded numbers are important when identifying a replacement control from an existing Yamaha rigging system.

Yamaha Control Family	OEM / Cross Reference Numbers
Pro Marine	48207SP
703-48201 Series	703-48201-A0-00 703-48201-A1-00 703-48201-A2-00 703-48201-A3-00
703-48205 A-Series	703-48205-A0-00 703-48205-A1-00 703-48205-A2-00 703-48205-A3-00 703-48205-A4-00 703-48205-A5-00
703-48205 Series	703-48205-10-00 703-48205-11-00 703-48205-12-00 703-48205-13-00 703-48205-15-00 703-48205-16-00 703-48205-17-00
703-48207 A-Series	703-48207-A1-00 703-48207-A3-00 703-48207-A4-00
703-48207 1A / 1B Series	703-48207-1A-00 703-48207-1A-10 703-48207-1B-10
703-48207 10-Series	703-48207-10-00 703-48207-11-00 703-48207-12-00 703-48207-13-00 703-48207-14-00 703-48207-15-00 703-48207-15-10 703-48207-16-10 703-48207-17-10 703-48207-18-10
703-48207 20-Series	703-48207-20-00 703-48207-21-00 703-48207-22-00 703-48207-23-00 703-48207-24-00 703-48207-25-00

What This Control is Used For

The Yamaha 703 side-mount control is the operator's primary interface with a compatible mechanically controlled Yamaha outboard.

Moving the control lever operates the engine's mechanical throttle and shift cables, allowing the operator to select forward, neutral and reverse while controlling engine speed from the helm.

The control also integrates the electrical functions needed for the compatible Yamaha 10-pin rigging system.

15-Foot 10-Pin Harness

Pro Marine 48207SP is supplied with a 15-foot electrical harness for compatible Yamaha 10-pin applications.

The harness provides the electrical connection between the remote control and the compatible engine rigging system.

Measure Your Rigging Distance Before Installation

This control uses a 15-foot harness. Confirm that this length is appropriate for the boat's helm-to-engine rigging layout before installation.

Do not route the harness under tension or around excessively tight bends.

Push-to-Choke Ignition

The 48207SP control is configured with the push-to-choke ignition function used on compatible Yamaha mechanical-control outboards.

This allows the applicable engine starting / enrichment function to be operated through the ignition switch rather than requiring a separate helm-mounted choke control.

Power Trim and Tilt Control

The Yamaha 703-style control incorporates power trim and tilt control for compatible Yamaha outboards.

This allows the operator to adjust engine trim while maintaining control of the throttle and shift lever.

Mechanical Throttle and Shift

Pro Marine 48207SP is for mechanically controlled Yamaha outboards.

A mechanical-control system uses physical throttle and shift cables between the remote-control box and the engine.

This control should not be confused with Yamaha electronic throttle-and-shift or drive-by-wire control systems.

Yamaha 703 Side Mount Design

The Yamaha 703 control family uses a side-mount remote-control configuration. This style is commonly installed on the side of the helm, console or cockpit where the operator can comfortably reach the control lever.

If replacing an existing Yamaha 703 control, compare the original mounting arrangement, electrical connector and OEM control number before installation.

Replacing an Older Yamaha 703 Control

Yamaha used numerous part numbers for variations and revisions of the 703 remote-control family. This is why an older control may carry a number beginning with 703-48201, 703-48205 or 703-48207.

Pro Marine 48207SP provides a replacement option for the compatible mechanical 10-pin applications represented by the cross-reference numbers listed above.

Common Reasons to Replace a Yamaha Remote Control

Excessive play in the control lever
Stiff or inconsistent throttle movement
Difficult shifting
Worn internal control mechanism
Failed ignition switch
Failed trim and tilt switch
Damaged or corroded electrical harness
Damaged control housing
Corrosion inside an older control box
Complete boat rerigging or restoration

Installation Tips

Verify that the engine uses mechanical throttle and shift controls.
Confirm that the electrical system uses the compatible Yamaha 10-pin connection.
Compare the original control part number with the cross-reference list.
Confirm that the 15-foot harness length is suitable for the installation.
Inspect the throttle and shift cables while the old control is removed.
Replace stiff, damaged or corroded control cables before installation.
Route the harness and cables without sharp bends or excessive tension.
Adjust throttle and shift cables according to Yamaha service procedures.
Verify forward, neutral and reverse operation before operating the boat.
Test ignition, push-to-choke and power trim functions after installation.

Key Features and Benefits

Pro Marine aftermarket Yamaha remote control
Yamaha 703-style side-mount design
Designed for compatible mechanical-control Yamaha outboards
Mechanical throttle and shift operation
10-pin electrical connection
15-foot harness
Push-to-choke ignition function
Integrated power trim and tilt control
Replaces numerous Yamaha 703 remote-control numbers
Manufacturer reference 703-48207-21-00
Pro Marine item number 48207SP

FAQ

What is Pro Marine 48207SP?
It is a Pro Marine aftermarket Yamaha 703-style side-mount mechanical remote control with a 10-pin electrical connection and 15-foot harness.

Is 48207SP a complete remote control or just a wiring harness?
It is a remote-control assembly with the 15-foot harness, not simply a replacement wiring harness.

Is this a mechanical Yamaha control?
Yes. This control is intended for compatible Yamaha outboards using mechanical throttle and shift cables.

What type of electrical connection does it use?
Pro Marine 48207SP uses the compatible Yamaha 10-pin electrical connection.

How long is the harness?
The control is supplied with a 15-foot harness.

Does it have power trim and tilt control?
Yes. The compatible Yamaha 703 control configuration includes power trim and tilt control.

Does this control have push-to-choke?
Yes. Pro Marine lists 48207SP with a push-to-choke ignition configuration.

Does 48207SP replace Yamaha 703-48207-21-00?
Yes. Pro Marine identifies 703-48207-21-00 as the manufacturer reference for 48207SP.

Does it replace Yamaha 703-48207-25-00?
Yes. 703-48207-25-00 is included in the supplied and verified cross-reference list for this control family.

Does it replace older 703-48205 controls?
Yes. Numerous 703-48205 numbers are included in the cross-reference list, including A-series and 10-series control numbers.

Will this work with Yamaha electronic controls?
No. This listing is for compatible mechanical throttle and shift applications, not Yamaha electronic throttle-and-shift systems.

Will it fit every Yamaha outboard in the listed horsepower range?
No. Horsepower alone does not determine control compatibility. Verify that your engine uses the compatible mechanical-control system and 10-pin electrical connection, or match the original control to one of the listed OEM numbers.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

Free shipping on orders over $100 continental U.S.
Orders ship via UPS, USPS, and FedEx.
Orders received before 5:30 PM EST ship the same business day.
Typical delivery time is 1-5 business days.

30-Day Return Policy

Returns accepted within 30 days of delivery.
Parts must be new, unused, and in original packaging.
Installed parts are not returnable.
Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000

Searchable Part Numbers

48207SP, 703-48201-A0-00, 703-48201-A1-00, 703-48201-A2-00, 703-48201-A3-00, 703-48205-A0-00, 703-48205-A1-00, 703-48205-A2-00, 703-48205-A3-00, 703-48205-A4-00, 703-48205-A5-00, 703-48205-10-00, 703-48205-11-00, 703-48205-12-00, 703-48205-13-00, 703-48205-15-00, 703-48205-16-00, 703-48205-17-00, 703-48207-A1-00, 703-48207-A3-00, 703-48207-A4-00, 703-48207-1A-00, 703-48207-1A-10, 703-48207-1B-10, 703-48207-10-00, 703-48207-11-00, 703-48207-12-00, 703-48207-13-00, 703-48207-14-00, 703-48207-15-00, 703-48207-15-10, 703-48207-16-10, 703-48207-17-10, 703-48207-18-10, 703-48207-20-00, 703-48207-21-00, 703-48207-22-00, 703-48207-23-00, 703-48207-24-00, 703-48207-25-00

Searchable Terms

Yamaha 703 remote control, Yamaha 703 control box, Yamaha side mount control, Yamaha mechanical remote control, Yamaha 10 pin control, Yamaha 10 pin remote, Yamaha 15 foot harness control, Yamaha push to choke control, Yamaha PTT remote control, Yamaha power trim control, Yamaha throttle control, Yamaha shift control, Yamaha outboard control box, Yamaha 703-48207, Yamaha 703-48205, Yamaha 703-48201, Pro Marine 48207SP

Item#:

48207SP

Cross Reference#:

703-48201-A0-00
703-48201-A1-00
703-48201-A2-00
703-48201-A3-00
703-48205-A0-00
703-48205-A1-00
703-48205-A2-00
703-48205-A3-00
703-48205-A4-00
703-48205-A5-00
703-48205-10-00
703-48205-11-00
703-48205-12-00
703-48205-13-00
703-48205-13-00
703-48205-15-00
703-48205-16-00
703-48205-17-00
703-48207-A1-00
703-48207-A3-00
703-48207-A4-00
703-48207-1A-00
703-48207-1A-10
703-48207-1B-10
703-48207-10-00
703-48207-11-00
703-48207-12-00
703-48207-13-00
703-48207-14-00
703-48207-15-00
703-48207-15-10
703-48207-16-10
703-48207-17-10
703-48207-18-10
703-48207-20-00
703-48207-21-00
703-48207-22-00
703-48207-23-00
703-48207-24-00
703-48207-25-00

Manufacturer Item:

703-48207-21-00

Manufacturer:

Pro Marine

Available:

In Stock

Your Price:

255.44

Each

Qty:

Johnson Evinrude 10-300HP Primer Solenoid Repair Kit - 7044P

Primer Valve Cover, Gasket and Fuel Primer Valve Repair Kit

Johnson and Evinrude Primer Solenoid Repair Kit

Pro Marine Primer Solenoid Repair Kit - 7044P

Pro Marine 7044P is a primer solenoid service and repair kit for a wide range of older Johnson and Evinrude outboard engines.

The kit replaces the commonly serviced components at the fuel primer solenoid including the primer cover, solenoid gasket and fuel primer valve.

Application data supplied for this kit covers numerous Johnson, Evinrude and OMC model-number families from 1980-1994, ranging from approximately 10 HP through 300 HP. Always verify the complete engine model number before ordering.

Pro Marine 7044P Primer Solenoid Kit

Application: Johnson / Evinrude Primer Solenoid
Engine Range: Select 10-300 HP Outboards
Years in Supplied Fitment: 1980-1994
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
Kit Type: Primer Solenoid Service / Repair Kit

OEM and Cross Reference Numbers

The 7044P primer-solenoid kit and its individual components are commonly searched under several Johnson, Evinrude, OMC and Sierra numbers.

Type	Part Numbers
Sierra Kit Numbers	18-7044, 18-7044-1, 18-70441
Primer Cover / Service Kit References	0437228, 0511807, 0765567, 18-0993
Cover OEM Numbers	0341071, 341071, 0765635, 765635
Gasket OEM Numbers	0341297, 341297, 0778216, 778216
Fuel Primer Valve OEM Numbers	0175158, 175158, 0765749, 765749

What is Included

The Pro Marine 7044P kit contains the primary service components used to repair the valve end of the primer solenoid.

Qty	Part	Included Version	OEM / Search Numbers
1	Primer Solenoid Gasket - 1297	Pro Marine	341297, 0341297, 0778216, 778216
1	Fuel Primer Valve - 175	EMP / Engineered Marine Parts	175158, 0175158, 0765749, 765749
1	Primer Solenoid Cover - 341P	Pro Marine	341071, 0341071, 0765635, 765635

OEM Versions of the Individual Components

Prefer genuine Johnson / Evinrude / OMC components? Pro Marine also stocks OEM versions of the gasket and fuel primer valve.

OEM Primer Solenoid Gasket - 1297-1

Genuine OMC / Bombardier version of the primer solenoid gasket. OEM manufacturer number 341297.

View OEM Primer Solenoid Gasket

OEM Fuel Primer Valve - 175-1

Genuine OMC / Bombardier fuel-primer valve. OEM manufacturer number 175158.

View OEM Fuel Primer Valve

How the Primer Solenoid Works

Many Johnson and Evinrude carbureted outboards use an electric primer solenoid instead of a traditional choke plate to provide additional fuel during cold starting.

When the primer is activated, fuel is directed through the primer system and into the engine's intake system to enrich the starting mixture.

The valve, cover and gasket at the end of the solenoid are common service points. Age, fuel exposure and repeated operation can eventually cause leakage, poor sealing or difficulty priming the engine.

Common Symptoms of a Primer Solenoid Problem

Hard cold starting
Engine does not receive enrichment when the primer is activated
Fuel leakage around the primer-solenoid cover
Fuel leaking from the manual primer valve
Cracked or distorted primer cover
Damaged or hardened solenoid gasket
Primer valve that no longer seals correctly

Repair the Service Components Instead of Replacing the Complete Solenoid

If the electrical portion of the primer solenoid is still functioning, many primer problems can be repaired by servicing the cover, gasket and primer valve rather than replacing the complete primer-solenoid assembly.

Inspect the complete primer assembly before ordering to confirm the solenoid body and electrical coil are still serviceable.

Johnson and Evinrude Fitment

The supplied application list for this primer-solenoid service kit contains 2,728 individual model/year entries covering Johnson, Evinrude and related OMC model designations.

Applications in the supplied fitment data range from 1980 through 1994 and from approximately 10 HP through 300 HP.

Horsepower	Years Found in Supplied Fitment	Fitment Notes
10 HP	1990-1992	Select Johnson / Evinrude models
15 HP	1990-1992	Select Johnson / Evinrude models
20 HP	1985-1994	Select electric-primer applications
25 HP	1984-1994	Multiple model families
28 HP	1986-1994	Multiple model families
30 HP	1984-1994	Multiple model families
35 HP	1984-1988	Select models
40 HP	1984-1994	Extensive model coverage
45 HP	1989-1992	Select models
48 HP	1987-1994	Select models
50 HP	1983-1994	Extensive model coverage
55 HP	1989-1992	Select models
60 HP	1983-1994	Multiple model families
65 HP	1984-1994	Select models
70 HP	1983-1994	Multiple model families
75 HP	1983-1988	Select models
85 HP	1980-1994	Select models
88 HP	1987-1994	Select models
90 HP	1981-1994	Extensive model coverage
100 HP	1980-1994	Multiple model families
110 HP	1986-1989	Select models
112 HP	1994	Select models
115 HP	1980-1994	Extensive model coverage
120 HP	1986-1994	Extensive model coverage
125 HP	1989-1994	Select models
140 HP	1980-1994	Extensive model coverage
150 HP	1980-1994	Extensive model coverage
155 HP	1984-1992	Select models
175 HP	1980-1994	Extensive model coverage
185 HP	1984-1994	Select models
200 HP	1980-1994	Extensive model coverage
225 HP	1986-1994	Extensive model coverage
235 HP	1980-1985	Select models
250 HP	1991-1994	Select models
275 HP	1986-1988	Select models
300 HP	1986-1994	Multiple model families

Important Fitment Note

The horsepower and year chart above summarizes the supplied application list. It does not mean that every Johnson or Evinrude engine of that horsepower and year uses this kit.

Match the complete engine model number and confirm that the engine uses this style of electric primer valve before ordering.

Why the OEM Numbers Matter

Older Johnson and Evinrude parts catalogs may show individual primer components instead of a complete repair kit. That is why searching the component OEM numbers can be especially useful when identifying this kit.

Common numbers associated with the components include:

341071 / 0341071 - Primer Solenoid Cover
341297 / 0341297 - Primer Solenoid Gasket
175158 / 0175158 - Fuel Primer Valve
0437228 - Primer Valve Cover and Gasket Service Assembly
0511807 - Primer Solenoid Cover and Gasket Assembly
0765567 - Primer Valve Service Reference
18-0993 - Sierra Primer Valve Cover / Gasket Reference
18-7044 / 18-7044-1 / 18-70441 - Sierra Service Valve Kit References

Key Features and Benefits

Primer solenoid repair kit for select Johnson and Evinrude outboards
Includes primer-solenoid cover
Includes primer-solenoid gasket
Includes fuel-primer valve
Pro Marine and EMP components included
Cross-references Sierra 18-7044 service-kit applications
Useful alternative to replacing the complete primer-solenoid assembly when the solenoid itself is still serviceable
Extensive supplied model coverage from 1980-1994
OEM versions of individual service components also available

FAQ

What is Pro Marine 7044P?
7044P is a primer-solenoid service kit containing the cover, gasket and fuel-primer valve used to repair the service end of many older Johnson and Evinrude electric primer assemblies.

What comes in the 7044P kit?
The kit includes one 341P primer-solenoid cover , one 1297 primer-solenoid gasket , and one 175 fuel-primer valve .

Does 7044P replace Sierra 18-7044?
The kit is used for the same primer-valve service application associated with Sierra 18-7044, 18-7044-1 and 18-70441.

What OEM number is the primer-solenoid gasket?
The gasket included in the kit corresponds to OEM 341297 / 0341297.

What OEM number is the fuel-primer valve?
The included fuel-primer valve corresponds to OEM 175158 / 0175158.

What OEM number is the primer-solenoid cover?
The Pro Marine cover corresponds to OEM 341071 / 0341071.

Do you stock OEM versions of the individual components?
Yes. Pro Marine stocks the OEM primer-solenoid gasket and the OEM fuel-primer valve .

Does this fit every Johnson or Evinrude from 1980-1994?
No. The supplied fitment contains a very large number of models from that period, but fitment must be verified by the complete model number and primer-solenoid design.

Can I use this kit if the primer solenoid itself is electrically bad?
This kit services the valve, cover and sealing components. If the solenoid coil or complete primer assembly has failed, the complete primer solenoid assembly may need replacement instead.