S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Outboard Motor Parts | Mercury, Yamaha, Suzuki & More
Shop outboard motor parts for maintenance, repair, troubleshooting, and full marine engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine, along with replacement marine parts for Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard engines.
Use this section to browse outboard parts by brand and engine system, including cooling, fuel delivery, ignition and electrical, intake, internal engine components, lower unit parts, steering, trim, transom, midsection, engine oil, service kits, gaskets, seals, carburetor parts, water pump parts, and rebuild components.
Shop Outboard Categories
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair
Honda Outboard Honda cooling, fuel, electrical, and engine parts
Johnson / Evinrude / E-tec Outboard OMC, Johnson, Evinrude, and E-tec parts
Mercury Outboard Mercury and Mariner service and rebuild parts
Suzuki Outboard Suzuki maintenance, lower unit, and engine parts
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts
Yamaha Outboard Yamaha service, repair, and rebuild parts Common Outboard Parts Found in This Category
- Water pump kits, impellers, thermostats, and cooling system parts
- Carburetor kits, fuel pumps, fuel filters, and fuel system components
- Ignition coils, stators, switch boxes, rectifiers, sensors, and electrical parts
- Pistons, piston rings, bearings, crankshafts, sleeves, gaskets, and rebuild parts
- Lower unit seals, bearings, gears, driveshaft parts, and gearcase components
- Steering parts, control cables, trim parts, and transom components
- Engine oil, gear lube, service kits, spark plugs, seal kits, and routine maintenance parts
Common Outboard Problems and Where to Start
- Overheating: inspect the water pump, impeller, thermostat, cooling passages, and engine anodes.
- Hard starting or rough idle: check carburetor parts, fuel delivery, ignition components, spark plugs, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes, sensors, wiring, and related electrical components.
- Low compression or poor power: inspect pistons, rings, gaskets, cylinder condition, bearings, and internal engine components.
- Milky gear lube or gearcase noise: check lower unit seals, bearings, gears, driveshaft parts, and prop shaft components.
Frequently Asked Questions
What is the difference between OEM and aftermarket outboard parts?
OEM parts are made by the original engine manufacturer. Aftermarket parts are replacement parts made by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products designed for marine maintenance, repair, and rebuild work.
How do I find parts for my outboard engine?
Start by selecting your outboard brand, then choose the correct engine system category. Use your model number, serial number, horsepower, and year range to confirm fitment before ordering parts.
What information do I need before ordering outboard parts?
You should have the engine manufacturer, horsepower, model number, serial number, and any OEM part numbers from the original component when available. This helps avoid ordering parts that look similar but fit a different engine family.
Are aftermarket outboard parts reliable?
Yes, quality aftermarket outboard parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many common outboard repair, maintenance, and rebuild applications.
What brands are included in the outboard category?
This category includes Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard parts.
Tip: Before ordering outboard parts, confirm your engine brand, horsepower, model number, serial number, and year range whenever possible.
F50556
F8077
F8077
F8186
0311598
0777517
18-2945
19183
19183B
19183K02
19183Q02
191832
191832
191833
20260
20260B
311598
31170
3852105
3852105
777517
8M0187157
802025
802025A1
9-60101
0777603
0912624
18-2378
18-2378
21731
318544
318544
445-180
777603
878808
9-72654
912624
912624
027283
027283
0307551
0777602
0912625
0982851
18-2387
18-2387
18-4255
22380
307551
445-132
777602
878811
912625
982851
Fits Yamaha F225, F250 & F300 4.2L V6 and F350 V8 Outboards (2008-Present)
Compatible with Yamaha F225, F250, and F300 4.2L V6 outboards (2008-Present), as well as Yamaha F350 V8 outboard engines. This OEM Yamaha oil change kit is designed for routine engine oil service and includes the essential components required for an oil and filter change using 10W-30 engine oil. This kit does not include gear lube or water pump (impeller) components.
OEM & Cross Reference Information
- Pro Marine Item Number: MRNXL-KT-10
- Cross Reference Number: LUB-MRNXL-KT-10
- Manufacturer Item Number: LUB-MRNXL-KT-10
- Manufacturer: Yamaha Outboard
Compatibility
| Engine Model | Displacement | Year Range | Oil Weight | Notes |
|---|---|---|---|---|
| Yamaha F225 | 4.2L V6 | 2008-Present | 10W-30 | Oil Change Kit |
| Yamaha F250 | 4.2L V6 | 2008-Present | 10W-30 | Oil Change Kit |
| Yamaha F300 | 4.2L V6 | 2008-Present | 10W-30 | Oil Change Kit |
| Yamaha F350 | V8 | All Applicable Years | 10W-30 | Oil Change Kit |
If you are unsure of your engine model or oil specification, confirm using your engine serial number before ordering.
What is Included
This OEM Yamaha oil change kit includes the required components for routine engine oil service:
- Yamaha 10W-30 4-stroke engine oil (correct quantity for listed engines)
- OEM Yamaha oil filter element
- Drain plug gasket / seal
Note: This kit is intended for engine oil service only. Gear lube, fuel filters, spark plugs, and water pump components are not included.
What This Kit Is Used For
This Yamaha oil change kit supports routine engine oil service at recommended maintenance intervals. Regular oil and filter changes help maintain proper lubrication, reduce internal engine wear, and support long-term engine reliability.
Frequently Asked Questions
What engines does this kit fit?
This kit fits Yamaha F225, F250, and F300 4.2L V6 outboards (2008-Present) and Yamaha F350 V8 outboards that specify 10W-30 engine oil.
Does this kit include gear lube?
No. This kit is for engine oil service only and does not include lower unit gear lube.
Does this kit include water pump or impeller parts?
No. Water pump and impeller components are not included.
Is this OEM?
Yes. This kit contains OEM Yamaha components.
Build Your Own Kit
Some customers prefer to customize their maintenance kit. If you would like to add gear lube, fuel filters, spark plugs, or additional service items, use the parts list below to build your own kit.
Notes
- Always follow Yamahas service manual recommendations for oil type and service intervals.
- Verify engine compatibility and oil specification before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.
BKR6E
NGK-BKR5E-00-00
0383170
0503130
0504403
0507333
0507335
0507668
0765883
0765961
09482-00427
5033634
5036329
507668
59482-94J10
765883
765961
804595
855717
8557171
OEM Mercury 25W50 Synthetic Blend Oil Change Kit
Mercury L6 200HP-400HP Verado Oil Change Kit
This OEM Mercury oil change kit contains the routine maintenance components needed to service select compatible Mercury L6 200HP through 400HP Verado FourStroke outboards.
The kit includes two gallons of Mercury SAE 25W50 Synthetic Blend 4-stroke marine engine oil, a premium Mercury oil filter, and drain plug seal for routine engine oil maintenance.
Compatible Applications
| Brand | Horsepower | Engine Type | Application Notes |
|---|---|---|---|
| Mercury | 200HP | L6 Verado FourStroke | Select compatible models |
| Mercury | 225HP | L6 Verado FourStroke | Select compatible models |
| Mercury | 250HP | L6 Verado FourStroke | Select compatible models |
| Mercury | 300HP | L6 Verado FourStroke | Select compatible models |
| Mercury | 350HP | L6 Verado FourStroke | Select compatible models |
| Mercury | 400HP | L6 Verado FourStroke | Select compatible models |
This oil change kit is intended for select compatible Mercury L6 200HP through 400HP Verado FourStroke outboards.
Always verify engine model, serial number, and oil specification before ordering.
What is Included
| Qty | Included Part | Application |
|---|---|---|
| 2 | Mercury SAE 25W50 Synthetic Blend 4-Stroke Marine Engine Oil - 1 Gallon | Engine oil service |
| 1 | Premium Mercury Oil Filter | Engine oil filtration service |
| 1 | Drain Plug Seal | Oil drain plug sealing component |
Oil and Gear Lube Links
-
Engine Oil Required:
Approximately 7.4 quarts total. Use 8 quarts or 2 gallons.
Mercury 25W50 Verado / Racing Oil - 1 Gallon | Mercury 25W50 4-Stroke Marine Oil - 1 Quart -
Gear Lube Required for Gearcase Service:
2 quarts.
Mercury High Performance Gear Lube - 1 Quart
Complete Your Service
We also stock the OEM Mercury oil change kit with SAE 25W40 Synthetic Blend marine engine oil for Mercury L6 Verado outboards.
View Mercury 25W40 Synthetic Blend Oil Change Kit
What This Kit is Used For
This Mercury oil change kit provides the routine maintenance parts needed to perform an engine oil and oil filter service on compatible Mercury L6 Verado FourStroke outboards.
Mercury SAE 25W50 Synthetic Blend marine engine oil is formulated specifically for high-performance marine applications and includes advanced corrosion protection designed to help protect internal engine components during operation and storage.
The 25W50 synthetic blend formulation is designed to help maintain lubricity and viscosity retention during demanding high-load and high-temperature Verado operation.
Regular oil and filter maintenance helps support proper lubrication, reduce internal engine wear, and maintain long-term engine reliability.
Key Features and Benefits
- OEM Mercury oil change kit for L6 Verado FourStroke outboards
- Fits select Mercury 200HP through 400HP Verado models
- Includes two gallons of Mercury SAE 25W50 Synthetic Blend marine engine oil
- Includes premium Mercury oil filter
- Includes drain plug seal
- Does not include gear lube
- Marine-specific additive package with advanced corrosion protection
- Synthetic blend formulation designed for demanding Verado operation
- Convenient all-in-one oil change kit
Oil Kit Details
- Kit Part Number: OCKIT-1
- Engine Compatibility: Mercury L6 200HP-400HP Verado FourStroke
- Oil Type: Mercury SAE 25W50 Synthetic Blend 4-Stroke Marine Engine Oil
- Oil Quantity Included: 2 Gallons
- Oil Capacity Reference: Approximately 7.4 quarts
- Included Components: Oil filter, engine oil, and drain plug seal
- Gear Lube Included: No
- Gear Lube Quantity for Gearcase Service: 2 quarts
- Service Type: Routine engine oil and oil filter maintenance
FAQ
What engines does this oil change kit fit?
This kit fits select compatible Mercury L6 200HP, 225HP, 250HP, 300HP,
350HP, and 400HP Verado FourStroke outboards.
What oil is included in this kit?
This kit includes two gallons of Mercury SAE 25W50 Synthetic Blend
4-stroke marine engine oil.
Does this kit include gear lube?
No. This is an engine oil change kit and does not include gear lube.
Mercury High Performance gear lube is linked above for gearcase service.
How much gear lube is required for gearcase service?
Gearcase service uses 2 quarts of Mercury High Performance gear lube.
Does this kit include instructions?
No. This kit includes only the oil change components listed above.
What is the difference between this kit and a 100 hour service kit?
This oil change kit is for engine oil and oil filter service. A 100 hour service kit includes additional maintenance parts such as spark plugs, filters, water pump components, anodes, and additional scheduled maintenance items.
Should I verify fitment before ordering?
Yes. Always confirm your engine model, serial number, and required oil specification before ordering maintenance parts.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Opened oil, lubricants, installed parts, and used maintenance items may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
OCKIT-1, Mercury Verado oil kit, Mercury L6 Verado oil change kit, Mercury 200HP Verado oil change kit, Mercury 225HP Verado oil change kit, Mercury 250HP Verado oil change kit, Mercury 300HP Verado oil change kit, Mercury 350HP Verado oil change kit, Mercury 400HP Verado oil change kit, Mercury L6 Verado maintenance kit, Mercury 25W50 synthetic blend oil kit, Mercury Verado 25W50 oil, Mercury High Performance gear lube, HPLUBEQT, 858084, 8M0078013, 8M0097858, 8M0097858-L, 8M0120657, 8M0120657-L
8M0169544
8M0188359
Fits Yamaha VF200, VF225 & VF250 4.2L V6 SHO Outboards (All Models)
Compatible with Yamaha VF200, VF225, and VF250 4.2L V6 SHO 4-stroke outboard engines. This OEM Yamaha oil change kit is designed for routine engine oil service and includes the essential components required for an oil and filter change using 5W-30 engine oil. This kit does not include gear lube or water pump (impeller) components.
OEM & Cross Reference Information
- Pro Marine Item Number: OCKIT-2
- Cross Reference / OEM Kit Number: LUB-MRNSH-KT-05
Compatibility
| Engine Model | Displacement | Engine Type | Oil Weight | Notes |
|---|---|---|---|---|
| Yamaha VF200 SHO | 4.2L V6 | 4-Stroke | 5W-30 | Oil Change Kit |
| Yamaha VF225 SHO | 4.2L V6 | 4-Stroke | 5W-30 | Oil Change Kit |
| Yamaha VF250 SHO | 4.2L V6 | 4-Stroke | 5W-30 | Oil Change Kit |
If you are unsure of your engine model or oil specification, confirm using your engine serial number before ordering.
What is Included
This OEM Yamaha oil change kit includes the required components for routine engine oil service:
- Yamaha 5W-30 4-stroke engine oil (correct quantity for listed models)
- OEM Yamaha oil filter element
- Drain plug gasket / seal
Note: This kit is intended for engine oil service only. Gear lube, fuel filters, spark plugs, and water pump components are not included.
What This Kit Is Used For
This Yamaha SHO oil change kit supports routine engine oil service at recommended maintenance intervals. Regular oil and filter changes help maintain proper lubrication, reduce internal engine wear, and support the high-performance demands of Yamaha SHO outboards.
Frequently Asked Questions
What engines does this kit fit?
This kit fits Yamaha VF200, VF225, and VF250 4.2L V6 SHO 4-stroke outboard engines.
Does this kit include gear lube?
No. This kit is for engine oil service only and does not include lower unit gear lube.
Does this kit include water pump or impeller parts?
No. Water pump and impeller components are not included.
Is this OEM?
Yes. This kit contains OEM Yamaha components.
Build Your Own Kit
Some customers prefer to customize their maintenance kit. If you would like to add gear lube, fuel filters, spark plugs, or additional service items, use the parts list below to build your own kit.
Notes
- Always follow Yamahas service manual recommendations for oil type and service intervals.
- Verify engine compatibility and oil specification before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.
Pro Marine Service Kit with Suzuki Oil & Gear Lube
Suzuki DF300B DF325A DF350A 2017-Present Pro Marine Service Kit
The Pro Marine 17400-98874P service kit is a complete maintenance package for Suzuki DF300B, DF325A, and DF350A outboards from 2017-Present. This kit includes Pro Marine service components along with Suzuki ECSTAR 10W40 engine oil and Suzuki Marine Gear Lube.
This version includes both engine oil and gear lube, making it a convenient all-in-one option for routine maintenance, annual service, and 100-hour service intervals.
Compatible Applications
| Manufacturer | Model | Years |
|---|---|---|
| Suzuki | DF300B | 2017-Present |
| Suzuki | DF325A | 2017-Present |
| Suzuki | DF350A | 2017-Present |
Oil & Gear Lube Included
This Pro Marine service kit includes Suzuki brand lubricants:
| Qty | Fluid |
|---|---|
| 2 | Suzuki ECSTAR 10W40 Engine Oil - 1 Gallon |
| 3 | Suzuki ECSTAR 10W40 Engine Oil - 1 Quart |
| 1 | Suzuki Marine Gear Lube - 1 Quart |
Total engine oil included: 9 quarts. Total gear lube included: 3 quarts.
Other Kit Options Available
OEM Kit Without Oil & Gear Lube
Some customers already have oil on hand or prefer to buy a different amount of engine oil and gear lube separately. Choose this OEM kit if you want the maintenance parts only.
What is Included
| Qty | Part Number | Description |
|---|---|---|
| 6 | ILZKR7D8 | NGK ILZKR7D8 Iridium Spark Plug |
| 3 | SUZ-GLUBE-QT | Suzuki Marine Gear Lube - 1 Quart |
| 2 | SUZ-10W40-GAL | Suzuki ECSTAR 10W40 Engine Oil - 1 Gallon |
| 1 | SUZ-10W40-QT | Suzuki ECSTAR 10W40 Engine Oil - 1 Quart |
| 1 | 0573 | Cotter Pin, Prop Nut 5-Pack |
| 7 | 09280-22019 | O-Ring, Anode Cover |
| 1 | 17400-98L03 | Suzuki DF300B / DF325A / DF350A Impeller Repair Kit |
| 1 | 5030465 | Oil Pan Drain Gasket |
| 7 | 55321-87J10P | Zinc Anode |
| 1 | 6105 | Anode Bar |
| 1 | 6324 | Fuel Filter |
| 3 | 799 | Suzuki Lower Unit Drain Plug Gasket |
| 1 | 93J00 | Oil Filter |
Build Your Own Maintenance Package
Some customers prefer to customize their kit and use the parts list above to build their own maintenance package. This can be useful if you already have some service parts on hand, want OEM components in certain locations, or prefer to order individual replacement parts separately.
What This Kit is Used For
This Suzuki DF300B, DF325A, and DF350A Pro Marine service kit is used for scheduled maintenance and annual service. It includes common replacement parts for the cooling system, fuel system, ignition system, oil service, lower unit service, corrosion protection, and the Suzuki lubricants needed for the job.
Regular service helps protect your Suzuki outboard, maintain reliable starting, support proper cooling, and reduce the risk of corrosion or maintenance-related failures.
Key Features and Benefits
- Pro Marine service kit for Suzuki DF300B, DF325A, and DF350A 2017-Present outboards
- Includes 9 quarts total of Suzuki ECSTAR 10W40 engine oil
- Includes 3 quarts of Suzuki Marine Gear Lube
- Includes 6 NGK ILZKR7D8 iridium spark plugs
- Includes fuel filter, oil filter, impeller repair kit, anodes, O-rings, and drain gaskets
- Convenient kit option with Suzuki fluids included
- Links to OEM kit with fluids and OEM kit without fluids
Service Kit Details
- Part Number: 17400-98874P
- Brand: Pro Marine
- Application: Suzuki DF300B, DF325A, DF350A
- Years: 2017-Present
- Engine Oil Included: Yes - 2 gallons and 1 quart Suzuki ECSTAR 10W40
- Gear Lube Included: Yes - 3 quarts Suzuki Marine Gear Lube
- Related OEM Kit Without Fluids: 17400-98875
- Related OEM Kit With Fluids: 17400-98875-1
FAQ
What models does this Pro Marine service kit fit?
This kit fits Suzuki DF300B, DF325A, and DF350A outboards from 2017-Present.
Does this kit include engine oil?
Yes. This kit includes 2 gallons and 1 quart of Suzuki ECSTAR 10W40 engine oil,
for a total of 9 quarts.
Does this kit include gear lube?
Yes. This kit includes 3 quarts of Suzuki Marine Gear Lube.
Do you offer OEM kit options?
Yes. The OEM kit without oil and the OEM kit with Suzuki oil and gear lube are linked above.
Can I purchase the service parts individually?
Yes. The individual components are linked in the What is Included section above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Installed service parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
17400-98874P, 17400-98875, 17400-98875-1, Suzuki DF300B service kit, Suzuki DF325A service kit, Suzuki DF350A service kit, Suzuki DF300B 2017-Present, Suzuki DF325A 2017-Present, Suzuki DF350A 2017-Present, ILZKR7D8, SUZ-GLUBE-QT, SUZ-10W40-GAL, SUZ-10W40-QT, 0573, 09280-22019, 17400-98L03, 5030465, 55321-87J10P, 6105, 6324, 799, 93J00, Suzuki ECSTAR 10W40, Suzuki Marine Gear Lube, Pro Marine Suzuki service kit
17400-98871
17400-98872
17400-98873
17400-98874
17400-98875
Fits Yamaha F75, F90 & F115 Outboards (Selected 4-Stroke Models)
Compatible with Yamaha F75, F90, and F115 4-stroke outboard engines. This OEM Yamaha oil change kit is designed for routine engine oil service and includes the essential components required for an oil and filter change using 20W-40 engine oil. This kit does not include gear lube or water pump (impeller) components.
OEM & Cross Reference Information
- Pro Marine Item Number: MRNMD-20
- Cross Reference Number: LUB-MRNMD-KT-20
- Manufacturer Item Number: LUB-MRNMD-KT-20
Compatibility
| Engine Model | Engine Type | Oil Weight | Notes |
|---|---|---|---|
| Yamaha F75 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F90 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F115 | 4-Stroke | 20W-40 | Oil Change Kit |
Confirm engine model and oil specification before ordering.
What is Included
This OEM Yamaha oil change kit includes the required components for routine engine oil service:
- Yamaha 20W-40 4-stroke engine oil (correct quantity for listed models)
- OEM Yamaha oil filter element
- Drain plug gasket / seal
Note: This kit is intended for engine oil service only. Gear lube, fuel filters, spark plugs, and water pump components are not included.
What This Kit Is Used For
This Yamaha oil change kit supports routine engine oil service at recommended maintenance intervals. Regular oil and filter changes help maintain proper lubrication, reduce internal engine wear, and support long-term engine reliability.
Frequently Asked Questions
What engines does this kit fit?
This kit fits Yamaha F75, F90, and F115 4-stroke outboard engines requiring 20W-40 engine oil.
Does this kit include gear lube?
No. This kit is for engine oil service only and does not include lower unit gear lube.
Does this kit include water pump or impeller parts?
No. Water pump and impeller components are not included.
Is this OEM?
Yes. This kit contains OEM Yamaha components.
Build Your Own Kit
Some customers prefer to customize their maintenance kit. If you would like to add gear lube, fuel filters, spark plugs, or additional service items, use the parts list below to build your own kit.
Notes
- Always follow Yamahas service manual recommendations for oil type and service intervals.
- Verify engine compatibility before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.
LUB-MRNMD-KT-21
LUBMRNMDKT20
LUBMRNMDKT21
STX12F / 15F 1200 / 1500
Yamaha
2 Stroke
115-225
4 Stroke
F75-200 2013 & Up
SHO VF90-250
92055-3767
93210-58114-00
93210-58144-00
93210-58677-00
Quicksilver 10W30 Oil Change Kit
Mercury 3.4L V6 & 4.6L V8 175HP-300HP Oil Change Kit
This Quicksilver oil change kit contains the routine maintenance components needed to service compatible Mercury 3.4L V6 and 4.6L V8 175HP-300HP FourStroke outboards.
The kit includes Quicksilver SAE 10W30 4-stroke marine engine oil, premium oil filter, oil drain hose, and service components to help simplify routine engine oil maintenance.
Compatible Applications
| Engine Platform | Horsepower Range | Engine Type | Application Notes |
|---|---|---|---|
| Mercury 3.4L V6 | 175HP-225HP | FourStroke | Select compatible models |
| Mercury 4.6L V8 | 250HP-300HP | FourStroke | Select compatible models |
What is Included
| Qty | Included Part | Part Number |
|---|---|---|
| 1 | Premium Oil Filter | Included |
| 7 | Quicksilver SAE 10W30 4-Stroke Marine Engine Oil | Included |
| 1 | Oil Drain Hose | Included |
We also stock OEM Mercury and Sierra versions of this oil change kit for Mercury V6 and V8 FourStroke outboards.
View OEM Mercury 10W30 Synthetic Blend Oil Change Kit
View Sierra 10W30 Oil Change Kit
What This Kit is Used For
This Quicksilver oil change kit provides the routine maintenance parts needed to perform an engine oil and oil filter service on compatible Mercury V6 and V8 FourStroke outboards.
Quicksilver marine engine oil is formulated for marine applications and helps provide lubrication stability, corrosion protection, and viscosity retention during operation and storage.
Routine oil and filter maintenance helps support proper engine performance, reduce wear, and extend engine life in demanding marine environments.
Some customers prefer OEM Mercury maintenance kits while others choose Quicksilver or Sierra service kits depending on maintenance preferences and budget.
Key Features and Benefits
- Quicksilver oil change kit for Mercury V6 and V8 FourStroke outboards
- Fits Mercury 175HP through 300HP applications
- Includes Quicksilver SAE 10W30 marine engine oil
- Includes premium oil filter and oil drain hose
- Designed for routine oil and filter maintenance
- Supports proper lubrication and engine protection
- Helps simplify scheduled maintenance service
- Convenient all-in-one maintenance kit
Oil Kit Details
- Kit Part Number: 8M0169548
- Engine Compatibility: Mercury 3.4L V6 & 4.6L V8 175HP-300HP FourStroke
- Oil Type: Quicksilver SAE 10W30 4-Stroke Marine Engine Oil
- Oil Quantity: 7 Liters
- Included Components: Oil filter, engine oil, oil drain hose, and service components
- Service Type: Routine engine oil and oil filter maintenance
FAQ
What engines does this oil change kit fit?
This kit fits compatible Mercury 3.4L V6 and 4.6L V8
175HP-300HP FourStroke outboards.
What is the difference between the Quicksilver, Mercury, and Sierra kits?
The OEM Mercury kit includes genuine Mercury-branded components and synthetic blend oil. Quicksilver and Sierra kits provide alternative maintenance options depending on brand preference and oil formulation.
Does this kit include a drain hose?
Yes. This kit includes an oil drain hose to help simplify routine oil maintenance and reduce spills during service.
How much oil is included in this kit?
This kit includes seven liters of Quicksilver SAE 10W30 4-stroke marine engine oil.
Can I perform this oil change service myself?
Yes. Many boat owners perform routine oil and filter maintenance themselves using basic hand tools and the proper service parts. Always follow your engine manufacturer’s service procedures and verify proper oil capacity before operation.
If you do not feel comfortable performing maintenance yourself, a Mercury-certified marine technician can typically complete this service quickly and help verify your engine is operating properly.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0169548, Quicksilver oil change kit, Mercury V6 oil change kit, Mercury V8 oil change kit, Mercury 175HP oil change kit, Mercury 200HP oil change kit, Mercury 225HP oil change kit, Mercury 250HP oil change kit, Mercury 300HP oil change kit, Quicksilver 10W30 marine oil kit, Mercury FourStroke maintenance kit
8M0169547
8M0169548
8M0187621
33491
33491