S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | Mercury, Yamaha, Suzuki & More
Shop outboard motor parts for maintenance, repair, troubleshooting, and full marine engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine, along with replacement marine parts for Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard engines.
Use this section to browse outboard parts by brand and engine system, including cooling, fuel delivery, ignition and electrical, intake, internal engine components, lower unit parts, steering, trim, transom, midsection, engine oil, service kits, gaskets, seals, carburetor parts, water pump parts, and rebuild components.
Shop Outboard Categories
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-tec Outboard OMC, Johnson, Evinrude, and E-tec parts 
Mercury Outboard Mercury and Mariner service and rebuild parts 
Suzuki Outboard Suzuki maintenance, lower unit, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha service, repair, and rebuild parts Common Outboard Parts Found in This Category
- Water pump kits, impellers, thermostats, and cooling system parts
- Carburetor kits, fuel pumps, fuel filters, and fuel system components
- Ignition coils, stators, switch boxes, rectifiers, sensors, and electrical parts
- Pistons, piston rings, bearings, crankshafts, sleeves, gaskets, and rebuild parts
- Lower unit seals, bearings, gears, driveshaft parts, and gearcase components
- Steering parts, control cables, trim parts, and transom components
- Engine oil, gear lube, service kits, spark plugs, seal kits, and routine maintenance parts
Common Outboard Problems and Where to Start
- Overheating: inspect the water pump, impeller, thermostat, cooling passages, and engine anodes.
- Hard starting or rough idle: check carburetor parts, fuel delivery, ignition components, spark plugs, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes, sensors, wiring, and related electrical components.
- Low compression or poor power: inspect pistons, rings, gaskets, cylinder condition, bearings, and internal engine components.
- Milky gear lube or gearcase noise: check lower unit seals, bearings, gears, driveshaft parts, and prop shaft components.
Frequently Asked Questions
What is the difference between OEM and aftermarket outboard parts?
OEM parts are made by the original engine manufacturer. Aftermarket parts are replacement parts made by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products designed for marine maintenance, repair, and rebuild work.
How do I find parts for my outboard engine?
Start by selecting your outboard brand, then choose the correct engine system category. Use your model number, serial number, horsepower, and year range to confirm fitment before ordering parts.
What information do I need before ordering outboard parts?
You should have the engine manufacturer, horsepower, model number, serial number, and any OEM part numbers from the original component when available. This helps avoid ordering parts that look similar but fit a different engine family.
Are aftermarket outboard parts reliable?
Yes, quality aftermarket outboard parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many common outboard repair, maintenance, and rebuild applications.
What brands are included in the outboard category?
This category includes Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard parts.
Tip: Before ordering outboard parts, confirm your engine brand, horsepower, model number, serial number, and year range whenever possible.
888988008
16735-ZY3-004
3AC-10150-M
3AC-10150-0
3AC101500
3AC101500M
898101T67
898101T67
883711A12
883711A02
8M0210760
8M6000623
859596
881879A7
881879010
8818793
8M0210760
8M6000623
859596
881879A7
881879010
8818793
6FJ-45300-03-8D
6P2-45300-20-8D
6P2-45300-21-8D
6S1-45300-21-8D
6S1-45300-22-8D
6S1-45300-23-8D
69J-45300-20-8D
69J-45300-21-8D
69J-45300-22-8D
69J-45300-23-8D
69J-45300-24-8D
69J-45300-24-8D
69J-45300-25-8D
69J-45300-25-8D
69J-45300-25-8D
69J-45300-25-8D
99999-04542-00
5219A2
6664A3
7433A3
7435A3
8896A3
9137A12
GLM Marine Water Pump Washer
Yamaha 90-300HP & Mercury FourStroke Water Pump Washer
The GLM 90201GM Driveshaft Water Pump Washer is an aftermarket replacement for Yamaha OEM 90201-22M01-00 and Mercury OEM 8556822. This washer is used in the lower unit water pump assembly and is commonly serviced with the impeller, wear plate, housing, and related driveshaft components.
This GLM version is a good choice for boat owners and repair shops looking for a practical aftermarket replacement during water pump service on many Yamaha 90-300HP and Mercury FourStroke applications.
OEM Numbers & Cross References
Yamaha identifies this component as a plate washer / water pump housing plate washer under OEM number 90201-22M01-00. Mercury and Mariner cross references include 8556822 and 12-8556822.
| Type | Part Number |
|---|---|
| GLM Marine | 90201GM |
| Yamaha OEM | 90201-22M01-00 |
| Mercury / Mariner OEM | 8556822 |
| Mercury / Mariner OEM | 12-8556822 |
| Sierra | 18-90201 |
| Sierra Cross Reference | 18-9078 / 18-9079 |
Compatible Applications
Fitment should be confirmed by matching the original OEM number. Yamaha 90201-22M01-00 is listed across many Yamaha water pump and gearcase applications, including 115HP through 250HP models in detailed OEM fitment listings, while aftermarket fitment data also identifies Yamaha 2-stroke 115-300HP, Yamaha 4-stroke 115-225HP, and Mercury 225 EFI FourStroke applications. :contentReference[oaicite:0]{index=0}
| Engine Family | Common Applications |
|---|---|
| Yamaha 2-Stroke | 115HP-300HP applications using OEM 90201-22M01-00 |
| Yamaha 4-Stroke | 115HP-225HP applications using OEM 90201-22M01-00 |
| Yamaha VMAX / HPDI / OX66 | Common 150HP-300HP water pump applications |
| Yamaha F-Series | Common F115, F150, F200, F225 applications |
| Mercury FourStroke | Mercury 225 EFI FourStroke, serial number 0T653945 & up |
| Mercury / Mariner | Applications using OEM 8556822 or 12-8556822 |
Water pump washers can vary by gearcase, driveshaft, and water pump housing design. Always confirm your original OEM part number before ordering.
This GLM washer replaces Yamaha 90201-22M01-00 and Mercury 8556822 / 12-8556822.
Also Available in Sierra Brand
Sierra 18-90201 Water Pump Washer
Prefer Sierra? We also stock the Sierra 18-90201 version of this Yamaha and Mercury water pump washer for the same OEM cross references.
Where This Washer Is Used
This washer is used in the water pump and driveshaft area of the lower unit. It helps maintain the correct stack-up of components in the pump assembly, supporting proper fitment of the housing, plate, impeller, and related hardware.
Because the washer is small and inexpensive, many technicians inspect or replace it during water pump service instead of reusing a worn, corroded, or distorted washer.
GLM 90201GM Features
- Aftermarket replacement from GLM Marine
- Replaces Yamaha OEM 90201-22M01-00
- Replaces Mercury / Mariner OEM 8556822 and 12-8556822
- Used in water pump and driveshaft service
- Common on many Yamaha 2-stroke and 4-stroke outboard applications
- Common on Mercury 225 EFI FourStroke applications using the listed OEM number
- Sierra alternative linked above
FAQ
What OEM numbers does GLM 90201GM replace?
GLM 90201GM replaces Yamaha 90201-22M01-00 and Mercury / Mariner 8556822 or
12-8556822.
Is this the same as the Sierra washer?
It is the GLM version of the same application family. The Sierra 18-90201
version is linked above.
What Yamaha engines commonly use this washer?
It is commonly listed for many Yamaha 2-stroke 115-300HP and Yamaha 4-stroke
115-225HP water pump applications using OEM 90201-22M01-00.
Does this fit Mercury outboards?
Yes, when your Mercury or Mariner application uses OEM number 8556822 or
12-8556822. It is commonly listed for Mercury 225 EFI FourStroke applications.
Should this washer be replaced during water pump service?
Replace it if it shows wear, corrosion, distortion, or damage. Always follow
your service manual and parts diagram.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
90201GM, GLM 90201GM, Sierra 18-90201, 18-90201, 18-9078, 18-9079, Yamaha 90201-22M01-00, Mercury 8556822, Mercury 12-8556822, Yamaha water pump washer, Yamaha driveshaft washer, Yamaha plate washer, Yamaha F115 water pump washer, Yamaha F150 water pump washer, Yamaha F200 water pump washer, Yamaha F225 water pump washer, Yamaha VMAX water pump parts, Yamaha HPDI water pump washer, Mercury 225 EFI FourStroke water pump washer
8556822
90201-22M01-00
90390
90390A1