S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair
Honda Outboard Honda cooling, fuel, electrical, and engine parts
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
849581
8495811
8495812
90201-10M14-00
Suzuki Trim & Tilt System Part
Suzuki DF200-DF350 Trim Rod Cap / Rod Guide 48630-98L02
This OEM Suzuki trim rod cap, also listed as a trim cylinder rod guide, is used in select Suzuki outboard power trim and tilt cylinder applications. It is commonly referenced for DF200 through DF350 four-stroke trim cylinder service where OEM part number 48630-98L02 is called for.
Suzuki part number 48630-98L02 replaces earlier OEM numbers 48630-98J00, 48630-98J01, 48630-98L00, and 48630-98L01. Always verify your engine model, serial number, and trim cylinder parts diagram before ordering.
Compatible Applications
| Suzuki Engine Family | Application | Fitment Note |
|---|---|---|
| DF200 4-stroke | Trim cylinder cap / rod guide | Commonly listed for 2008-2014 applications. Verify serial number. |
| DF225 / DF250 4-stroke | Trim cylinder cap / rod guide | Commonly listed for 2008-Present applications. Confirm by OEM diagram. |
| DF300 4-stroke | Trim cylinder cap / rod guide | Commonly listed for 2007-Present applications. Confirm exact model and serial. |
| DF325 / DF350 4-stroke | Selected trim cylinder applications | Use only where your parts diagram calls for 48630-98L02 or a superseded number below. |
Important Fitment Note
This part is for Suzuki trim cylinder service where OEM 48630-98L02 or one of its superseded part numbers is specified. Trim and tilt components can vary by model, serial range, and cylinder location, so confirm that you are servicing the correct trim cylinder before ordering.
OEM & Cross Reference Numbers
| Current Suzuki OEM Number | 48630-98L02 |
|---|---|
| Replaces / Cross References | 48630-98J00, 48630-98J01, 48630-98L00, 48630-98L01 |
| Part Description | Trim rod cap / trim cylinder rod guide |
| Manufacturer | Suzuki |
| Pro Marine Item Number | 48630-98L02 |
What This Part is Used For
The trim rod cap / rod guide is part of the hydraulic trim cylinder assembly. It helps guide the trim rod and supports the sealing area of the cylinder. If the trim rod is pitted, leaking, binding, or showing signs of seal wear, inspect the rod, cap, seals, and related trim cylinder components before reassembly.
Key Features and Benefits
- OEM Suzuki trim and tilt component for proper fit and service compatibility.
- Used as a trim rod cap or rod guide in select Suzuki trim cylinder assemblies.
- Current OEM number replaces multiple earlier Suzuki part numbers.
- Useful when repairing trim cylinder leaks, worn rod guide areas, or damaged trim caps.
- Best matched by OEM number, engine serial number, and Suzuki parts diagram.
Product Details
| Item Number | 48630-98L02 |
|---|---|
| Manufacturer Item | 48630-98L02 |
| Manufacturer | Suzuki |
| Product Type | Trim rod cap / rod guide |
| System | Power trim and tilt / trim cylinder |
FAQ
Is 48630-98L02 the same as 48630-98J00 or 48630-98L01?
48630-98L02 is the current Suzuki OEM number shown as a replacement or cross reference for 48630-98J00, 48630-98J01, 48630-98L00, and 48630-98L01.
What engines does this trim rod cap fit?
It is commonly listed for select Suzuki DF200 through DF350 trim cylinder applications. Because trim assemblies can vary, confirm your serial number and OEM diagram before ordering.
Should I inspect anything else while replacing this cap?
Yes. Inspect the trim rod for pitting, scoring, or corrosion, and check the seal area before reassembly. A damaged rod can quickly damage new trim cylinder seals or caps.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Suzuki trim rod cap, Suzuki rod guide, Suzuki trim cylinder cap, Suzuki trim cylinder end cap, DF200 trim cap, DF225 trim rod guide, DF250 trim cylinder cap, DF300 trim cap, DF350 rod guide.
Searchable Part Numbers
48630-98L02, 48630-98J00, 48630-98J01, 48630-98L00, 48630-98L01
48630-98J01
48630-98L00
48630-98L01
48630-98L02
93341-93020-00
5031382
F350 4.3L 2023-Up
8886813
93341-930U0-00
93341-930V2-00
93210-19123-00
93210-19123-09
93210-198J0-00
93210-19800-00
93210-19809-00
2 Stroke
150hp 1984-2010
175 1984-2000
150hp HPDI 2.6L
175hp 2.6L HPDI
200hp 2.6L HPDI
200 76 Degree
200 90 Degree
225 90 Degree
200hp V6 3.3l HPDI
4 Stroke
150hp 4 Cyl 2004-2021
150hp 2.8L
175hp 2.8L
200hp 2.8L
84245
93210-97M55-00
6AH-46241-00-00
18-3791
688-45997-00-00
688-45997-01-00
688-45997-02-00
68845
689-45997-00-00