S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
18-2654
446-125
508533
775425
79831A1
87530
9-74202
9-74208
18-2642
446-134
816575A5
87513
9-74209
66303A1
87573
Genuine Mercury Square Fuel Pump for Mercury and Mariner 30-300HP
This genuine Mercury square mechanical fuel pump is used on numerous Mercury and Mariner carbureted, EFI, DFI and Optimax outboards. It is the factory OEM option for applications calling for 14360A78 or one of the listed superseded Mercury fuel-pump numbers.
Genuine Mercury Fuel Pump Assembly
This listing is for the complete engine-mounted square mechanical fuel pump, not only a diaphragm or rebuild kit.
The pump uses engine crankcase pressure pulses to draw fuel from the boat's fuel system and deliver it to the carburetors, fuel reservoir, vapor separator or Optimax fuel system, depending on the engine configuration.
Brand: Genuine Mercury Marine
Part type: Mechanical diaphragm fuel pump
Primary OEM reference: 14360A78
Why Choose Genuine Mercury?
Manufactured and supplied as a genuine Mercury Marine replacement part.
Designed for Mercury and Mariner applications specified in the factory parts catalog.
Replaces the complete square mechanical fuel-pump assembly.
Appropriate for owners and technicians who prefer an original Mercury-branded component.
OEM & Superseded Part Numbers
Mercury revised this square fuel-pump assembly numerous times. Match one of the numbers below to the original pump or to the number listed in the Mercury parts catalog.
Mercury and Mariner Fitment Overview
This fuel pump appears across many Mercury and Mariner engine families. Use the overview below to identify the general application group, then verify the engine serial number and OEM pump number.
| Engine Family | Common Applications |
|---|---|
| 30-60HP | Select 2-cylinder, 3-cylinder, 4-cylinder, Jet and BigFoot Mercury and Mariner models |
| 65-125HP | Select 3-cylinder, 4-cylinder, 6-cylinder, Jet, Marathon, SeaPro, EFI and Optimax models |
| 135-200HP | Select V6 carbureted, EFI, XR6, Magnum, Marathon, SeaPro and Optimax models |
| 225-300HP | Select V6, EFI, DFI, Optimax, Pro Max, Pro XS, Marathon and SeaPro models |
Common Mercury Optimax Applications
This square mechanical pump is commonly used on the following Mercury Optimax, Pro XS and XS engine families when the factory parts catalog specifies one of the OEM numbers listed above.
3-cylinder, 2004-2014
3-cylinder, 2006-2014
3-cylinder, 2004-2014
1.5L 3-cylinder, 2004-2014
1.5L 3-cylinder, 2006-2012
3.0L 6-cylinder, 1997-2002
3.0L 6-cylinder, 1998-2006
3.0L, 2004-2018
3.0L, 2006-2018
3.0L, 1998-2005
3.2L, 2006-2017
Important Fitment Note
Mercury used several square fuel-pump revisions across engines with the same horsepower. Horsepower or model year alone is not enough to confirm fitment.
Match the OEM number on the original pump or verify the complete engine serial number in the detailed fitment section below.
What This Fuel Pump Does
The square mechanical fuel pump uses pressure pulses from the engine crankcase to move fuel through the outboard's low-pressure fuel system.
Depending on the engine design, the pump may supply fuel directly to the carburetors or feed a fuel reservoir, vapor separator or Optimax fuel system.
Possible Symptoms of a Weak Fuel Pump
- Hard starting or extended cranking
- Engine stalls shortly after starting
- Fuel starvation under load
- Hesitation during acceleration
- Loss of power at higher RPM
- Engine runs better while the primer bulb is manually pumped
- Fuel leakage around the pump or diaphragm housing
These symptoms can also result from restricted filters, damaged fuel lines, air leaks, carburetor problems or other fuel-system faults. Diagnose the complete system before replacing the pump.
Grouped Mercury Serial-Number Fitment
Serial ranges are grouped where multiple horsepower or model families share the same catalog range. This keeps the information searchable while reducing repeated entries.
| Engine Models | Serial Number Range | Catalog Notes |
|---|---|---|
| 30, 40HP 3-cylinder | 0G590000 through 0G760299 | Select USA production models |
| 40, 50HP 3-cylinder | 0G760300 through 0T979999 | Select USA and Belgium production models |
| 50, 55, 60HP 3-cylinder | 0G590000 through 0T979999 | Includes listed standard, BigFoot and Jet applications |
| 45, 50, 55, 60 Jet | 0G590000 through 0T979999 | Select USA and Belgium Jet models |
| 65, 75, 90HP 3-cylinder | 0D283222 through 0G960499 | Select carbureted and early production applications |
| 75, 80, 90, 115, 125HP Optimax | 0T178500 and later listed production ranges | 1.5L 3-cylinder DFI and Optimax models |
| 100, 115, 125HP | 0G960500 through 1B226999 | Select 4-cylinder, EFI and related applications |
| 135, 150, 175, 200HP V6 | 0G960500 through 1B226999 | Select carbureted, EFI, XR6, Magnum, Marathon and SeaPro models |
| 200, 225HP Optimax | 0G960500 through 1B417701 | Select 3.0L DFI and Optimax production ranges |
| 225, 250HP Pro XS | 1B226999 through listed later production ranges | Select 3.0L Pro XS applications |
| 300HP Pro Max and XS | 0T409000 through listed 1B-series ranges | Select 3.0L Pro Max and 3.2L XS applications |
Mercury applications can differ by production country, engine configuration and serial break. Confirm that the factory catalog specifies one of the OEM numbers listed on this page.
Looking for the Pro Marine Replacement?
The genuine Mercury pump is the factory OEM option. The Pro Marine 14360P below provides the same application coverage as an economical Pro Marine-branded replacement.
Pro Marine Square Fuel Pump – 14360P
Pro Marine-branded replacement for the listed Mercury 14360-series fuel pumps. A direct replacement option for customers seeking dependable fitment and practical value.
View Pro Marine Fuel PumpGenuine Mercury vs. Pro Marine
| Feature | Genuine Mercury | Pro Marine 14360P |
|---|---|---|
| Complete square fuel pump | Yes | Yes |
| Direct replacement application | Yes | Yes |
| Factory Mercury-branded component | Yes | No |
| Pro Marine-branded component | No | Yes |
| Best suited for | Customers preferring OEM | Value-focused replacement |
Frequently Asked Questions
Is this a genuine Mercury part?
Yes. This is the genuine Mercury Marine square mechanical fuel-pump assembly.
Is this a complete fuel pump?
Yes. This is the complete square fuel-pump assembly, not only an internal diaphragm or rebuild kit.
Does it replace Mercury 14360A78?
Yes. This pump corresponds with 14360A78 and the other listed superseded Mercury part numbers.
Will it fit every Mercury 30-300HP outboard?
No. The horsepower range represents combined application coverage. Fitment depends on the engine model, configuration, serial number and OEM pump number.
Why is the engine serial number important?
Mercury frequently used different components within the same horsepower family. The serial number identifies the engine's exact production range.
Is a Pro Marine replacement available?
Yes. Pro Marine 14360P is available as an economical replacement. Use the product card above to view it.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days of delivery.
- Parts must be new, unused and in their original packaging.
- Installed parts are not returnable.
- OEM electrical parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or have an order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers & Applications
14360A78, 14360A14, 14360A15, 14360A16, 14360A24, 14360A27, 14360A41, 14360A43, 14360A53, 14360A66, 14360A69, 14360A71, 14360T75, 15930A21, 98766-C1, 98766C1, 99357A4, genuine Mercury square fuel pump, Mercury mechanical fuel pump, Mercury pulse fuel pump, Mariner square fuel pump, Mercury Optimax fuel pump, Mercury Pro XS fuel pump, Mercury 30HP fuel pump, Mercury 40HP fuel pump, Mercury 50HP fuel pump, Mercury 60HP fuel pump, Mercury 75HP fuel pump, Mercury 90HP fuel pump, Mercury 115HP fuel pump, Mercury 125HP fuel pump, Mercury 150HP fuel pump, Mercury 175HP fuel pump, Mercury 200HP fuel pump, Mercury 225HP fuel pump, Mercury 250HP fuel pump, Mercury 300HP fuel pump
14360A15
14360A16
14360A24
14360A27
14360A41
14360A43
14360A71
14360A78
99357A4
