S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
Fits Yamaha 25-115HP & Mercury EFI Outboards
Designed for small to mid-range EFI outboard engines. The 35430P Fuel Filter Strainer is an OEM-style replacement used in Yamaha and Mercury 4-stroke EFI fuel systems. It helps filter debris before fuel reaches injectors and other critical components.
Compatibility
This fuel filter strainer fits select Yamaha 25-115HP EFI outboards and equivalent Mercury 4-stroke EFI models. It is commonly installed within the fuel system or VST assembly.
Application Chart
| Brand | Engine Model | Horsepower | Engine Type | Component |
|---|---|---|---|---|
| Yamaha | F25 / F30 | 25-30 HP | 4-Stroke EFI | Fuel System Strainer |
| Yamaha | F40 / F50 / F60 | 40-60 HP | 4-Stroke EFI | Fuel System Strainer |
| Yamaha | F70 / F75 / F90 | 70-90 HP | 4-Stroke EFI | Fuel System Strainer |
| Yamaha | F115 (select models) | 115 HP | 4-Stroke EFI | Fuel System Strainer |
| Mercury | 4-Stroke EFI Outboards | 25-115 HP | EFI | Fuel System Strainer |
Always confirm compatibility using your engine serial number and existing part number before ordering.
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Part Number | 35430P |
| Cross Reference # | 6C5-24251-00-00 |
| Cross Reference # | 6C5-24251-01-00 |
| Cross Reference # | 892758001 |
| Cross Reference # | 18-79983 |
| Cross Reference # | 1-31-6C524251 |
Alternate Part Options
This fuel filter strainer is also available under alternate part numbers and brands.
- Fuel Filter Strainer 1-31-6C524251 (Pro Marine) – Same fitment and application, Pro Marine branded version.
What This Part Is Used For
This fuel filter strainer is used to capture debris and contaminants within the fuel system before fuel reaches sensitive components like injectors and pumps.
Replacing the strainer during routine maintenance helps maintain proper fuel flow, improve engine reliability, and prevent fuel system issues.
Frequently Asked Questions
What engines does this fit?
This strainer fits Yamaha 25-115HP EFI outboards and equivalent Mercury 4-stroke EFI models.
Where is this filter located?
It is typically located within the fuel system or VST assembly.
Is this the same as 6C5-24251?
Yes. This part replaces Yamaha OEM part numbers 6C5-24251-00-00 and 6C5-24251-01-00.
When should it be replaced?
It should be inspected and replaced during routine maintenance or when fuel contamination is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer or technician? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.)
- Ships via UPS, USPS, and FedEx
- 5:30 PM EST daily cutoff
- Typical delivery 15 business days
30-Day Return Policy
- Returns within 30 days
- Items must be unused and in original packaging
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
Part Number: 35430P
Cross Reference #: 6C5-24251-00-00, 6C5-24251-01-00, 892758001, 18-79983, 1-31-6C524251
Common Searches: Yamaha fuel strainer 6C5, Mercury EFI fuel filter, 25-115hp fuel filter, outboard fuel system strainer
18-79983
35430
6C5-24251-00-00
6C5-24251-01-00
892758001
6H1-45631-09-00
66T-45560-01-00
18-3849
695-11181-A0-00
695-11181-A0-00
695-11181-A1-00
695-11181-A1-00
695-11181-00-00
14940
18-3982
822321A12
822321A8
822321A8
824905A12
824905A12
9-54225
VST Seal 15626-92J01
The 15626-92J01 VST Seal is a Pro Marine replacement seal used in the Vapor Separator Tank (VST) on select Suzuki 4-stroke outboards. This seal ensures proper sealing within the fuel system, helping maintain consistent fuel pressure and preventing internal fuel leaks.
Fitment Overview
This seal replaces Suzuki OEM part number 15626-92J00 and is used in the VST (Vapor Separator Tank) assembly on Suzuki DF70 through DF140 EFI outboards.
The 92J00 to 92J01 supersession identifies the same sealing component used across this Suzuki midrange 4-stroke engine platform.
Compatibility
| Brand | Model | Engine Type |
|---|---|---|
| Suzuki | DF70A | 4-Stroke EFI |
| Suzuki | DF80A | 4-Stroke EFI |
| Suzuki | DF90A | 4-Stroke EFI |
| Suzuki | DF115A | 4-Stroke EFI |
| Suzuki | DF140A | 4-Stroke EFI |
These engines use a Vapor Separator Tank (VST) as part of the EFI fuel system to regulate and deliver fuel to the high-pressure side of the system.
Example Model Applications
- Suzuki DF70A models (2014Present)
- Suzuki DF80A models
- Suzuki DF90A models (2014Present)
- Suzuki DF115A models (20132020)
- Suzuki DF140A models (20132020)
These are common applications. Always verify using your OEM part number or engine diagram.
Fits These Serial Ranges
This VST seal is used across multiple Suzuki engine generations and does not follow a single serial-number break.
Important: Confirm compatibility by matching your existing seal to 15626-92J01 or 15626-92J00.
Part Numbers and Cross References
| Type | Part Number |
|---|---|
| Pro Marine | 15626-92J01 |
| Suzuki OEM | 15626-92J01 |
| Suzuki OEM | 15626-92J00 |
What This Part Is Used For
This seal is used inside the Vapor Separator Tank (VST), which stores and regulates fuel before it is delivered to the high-pressure fuel system in EFI outboards.
- Seals internal VST components
- Helps maintain proper fuel pressure
- Prevents fuel leakage inside the system
- Supports efficient EFI operation
A worn or damaged seal can cause fuel leaks, pressure loss, or poor engine performance.
System Function and Connections
- System Type: Electronic Fuel Injection (EFI)
- Component Type: VST (Vapor Separator Tank) seal
- Location: Inside VST fuel system assembly
FAQ
What engines does this seal fit?
It fits Suzuki DF70A, DF80A, DF90A, DF115A, and DF140A 4-stroke EFI outboards.
What does this replace?
It replaces Suzuki part number 15626-92J00.
What is the VST?
The Vapor Separator Tank stores fuel and ensures a steady supply to the high-pressure fuel system.
Why is this seal important?
It maintains proper sealing inside the fuel system, preventing leaks and ensuring consistent fuel delivery.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
15626-92J01, 15626-92J00, Suzuki VST seal, DF70 fuel seal, DF90 VST seal, DF140 fuel system seal
15626-92J01
