S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair
Honda Outboard Honda cooling, fuel, electrical, and engine parts
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
0775467
43026B2
43026Q02
43026T 2
43026T2
430261
430262
430264
8M0025709
34801-99E03
34801-99E04
34801-99E04
34801-99E05
34804-99E00
5031116
5031474
5036054
OEM Suzuki Water Outlet Gasket
Suzuki Cooling System Water Outlet Gasket
This genuine OEM Suzuki water outlet gasket is used on select Suzuki DF-series outboards within the engine cooling system water outlet assembly.
The gasket helps create a proper seal between the water outlet housing and cooling system components to help prevent cooling system leaks and maintain proper engine water circulation.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Suzuki DF150 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF175 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF200 | FourStroke | Cooling System | Used in compatible water outlet housing assemblies |
| Suzuki DF225 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Suzuki DF250 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Suzuki DF300 | FourStroke | Cooling System | Used in compatible cooling system applications |
| Johnson / Evinrude | Select Rebadged Suzuki Models | Cooling System | Cross references BRP part number 5035048 |
Always verify your engine model, serial number, and cooling system diagram before ordering engine gaskets and seals.
OEM Part Numbers & Cross References
| Brand | Part Number |
|---|---|
| Suzuki OEM | 17582-93J00 |
| Johnson / Evinrude | 5035048 |
| Alternate Search Format | 1758293J00 |
What This Water Outlet Gasket is Used For
This gasket is used in the cooling system water outlet assembly on compatible Suzuki DF-series outboards.
The gasket helps seal mating surfaces within the cooling system to help maintain proper water circulation and cooling system pressure.
A worn or damaged cooling system gasket may allow water leaks, improper sealing, or cooling performance issues.
Replacing cooling system gaskets during service or repair helps maintain reliable engine cooling system operation.
Key Features and Benefits
- Genuine OEM Suzuki cooling system gasket
- Fits select Suzuki DF150-DF300 outboards
- Used in compatible water outlet housing assemblies
- Cross references Johnson / Evinrude part number 5035048
- Helps maintain proper cooling system sealing
- Helps reduce cooling system leaks
- OEM fit and material compatibility
- Sold individually
Water Outlet Gasket Details
- Brand: Suzuki
- Part Type: Water Outlet Gasket
- OEM Part Number: 17582-93J00
- Cross Reference: Johnson / Evinrude 5035048
- Application: Suzuki DF-Series Cooling Systems
- System: Engine Cooling System
- Quantity Sold: Each
FAQ
What engines does this gasket fit?
This gasket fits select Suzuki DF150 through DF300 outboards using compatible cooling system water outlet assemblies.
What does this gasket seal?
It seals the water outlet housing area within the outboard cooling system.
Does this cross reference Johnson / Evinrude part numbers?
Yes. This Suzuki gasket cross references Johnson / Evinrude OEM part number 5035048.
Can a damaged water outlet gasket cause cooling system leaks?
Yes. A worn or damaged gasket may allow water leakage or improper cooling system sealing.
Should I verify my serial number before ordering?
Yes. Suzuki used different cooling system components depending on model and production range, so diagram verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Cooling system gaskets should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
17582-93J00, 1758293J00, 5035048, Suzuki water outlet gasket, Suzuki cooling gasket, Suzuki DF150 gasket, Suzuki DF175 gasket, Suzuki DF200 gasket, Suzuki DF225 gasket, Suzuki DF250 gasket, Suzuki DF300 gasket, Suzuki cooling system gasket, Suzuki water housing gasket, Johnson Evinrude 5035048, outboard cooling gasket
18-0793
5035048
F17510
F50342
F50342-1
F503421
0303191
0305857
0307853
0322598
0765640
0777570
18-7413
22175
303191
307853
38933
526-08
62702
627021
765640
777570
8M0012298
8M0214954
812876
818391
818391001
9-51213
9-51400
93310-323V6-00
93310-32337-00
818391
818391001