S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | Mercury, Yamaha, Suzuki & More
Shop outboard motor parts for maintenance, repair, troubleshooting, and full marine engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine, along with replacement marine parts for Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard engines.
Use this section to browse outboard parts by brand and engine system, including cooling, fuel delivery, ignition and electrical, intake, internal engine components, lower unit parts, steering, trim, transom, midsection, engine oil, service kits, gaskets, seals, carburetor parts, water pump parts, and rebuild components.
Shop Outboard Categories
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-tec Outboard OMC, Johnson, Evinrude, and E-tec parts 
Mercury Outboard Mercury and Mariner service and rebuild parts 
Suzuki Outboard Suzuki maintenance, lower unit, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha service, repair, and rebuild parts Common Outboard Parts Found in This Category
- Water pump kits, impellers, thermostats, and cooling system parts
- Carburetor kits, fuel pumps, fuel filters, and fuel system components
- Ignition coils, stators, switch boxes, rectifiers, sensors, and electrical parts
- Pistons, piston rings, bearings, crankshafts, sleeves, gaskets, and rebuild parts
- Lower unit seals, bearings, gears, driveshaft parts, and gearcase components
- Steering parts, control cables, trim parts, and transom components
- Engine oil, gear lube, service kits, spark plugs, seal kits, and routine maintenance parts
Common Outboard Problems and Where to Start
- Overheating: inspect the water pump, impeller, thermostat, cooling passages, and engine anodes.
- Hard starting or rough idle: check carburetor parts, fuel delivery, ignition components, spark plugs, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes, sensors, wiring, and related electrical components.
- Low compression or poor power: inspect pistons, rings, gaskets, cylinder condition, bearings, and internal engine components.
- Milky gear lube or gearcase noise: check lower unit seals, bearings, gears, driveshaft parts, and prop shaft components.
Frequently Asked Questions
What is the difference between OEM and aftermarket outboard parts?
OEM parts are made by the original engine manufacturer. Aftermarket parts are replacement parts made by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products designed for marine maintenance, repair, and rebuild work.
How do I find parts for my outboard engine?
Start by selecting your outboard brand, then choose the correct engine system category. Use your model number, serial number, horsepower, and year range to confirm fitment before ordering parts.
What information do I need before ordering outboard parts?
You should have the engine manufacturer, horsepower, model number, serial number, and any OEM part numbers from the original component when available. This helps avoid ordering parts that look similar but fit a different engine family.
Are aftermarket outboard parts reliable?
Yes, quality aftermarket outboard parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many common outboard repair, maintenance, and rebuild applications.
What brands are included in the outboard category?
This category includes Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard parts.
Tip: Before ordering outboard parts, confirm your engine brand, horsepower, model number, serial number, and year range whenever possible.
F6 2001-2004
F8 2001-2024Â
T8 2001-2004
F9.9 1985-2024
T9.9 1985-2024
6G8-12414-A0-00
6G8-12414-00-00
60R-E2414-A0-00
63P-12414-00-00
GLM Yamaha Piston Ring Kit
Yamaha 115-250HP Standard Piston Ring Kit
The GLM 3937GM Standard Piston Ring Kit is an aftermarket replacement ring set designed for a wide range of Yamaha 2-stroke outboards. This standard bore ring kit replaces several Yamaha OEM piston ring assemblies and is commonly used during powerhead rebuilds, piston replacement, compression restoration, and complete engine overhauls.
This GLM ring kit replaces Yamaha OEM numbers 6K7-11601-02-00, 6R5-11603-00-00, 64D-11603-00-00, 64D-11603-01-00, and 64D-11603-02-00.
Compatible Applications
Based on Yamaha OEM supersessions and application data, this ring kit is commonly used on Yamaha V4 and V6 2-stroke outboards including many carbureted, EFI, Saltwater Series, ProV, Excel, and OX66 models that utilize the OEM numbers listed above.
| Manufacturer | Models | Years |
|---|---|---|
| Yamaha | 115HP 2-Stroke | Various Applications |
| Yamaha | 130HP 2-Stroke | Various Applications |
| Yamaha | 150HP 2-Stroke | Various Applications |
| Yamaha | 175HP 2-Stroke | Various Applications |
| Yamaha | 200HP 2-Stroke | Various Applications |
| Yamaha | 225HP 2-Stroke | Various Applications |
| Yamaha | 250HP 2-Stroke | Various Applications |
Yamaha used multiple piston and ring designs across engines with similar horsepower ratings. Always verify your original Yamaha OEM ring number before ordering.
This kit replaces OEM numbers 6K7-11601-02-00, 6R5-11603-00-00, 64D-11603-00-00, 64D-11603-01-00, and 64D-11603-02-00.
OEM & Cross Reference Numbers
| Type | Part Number |
|---|---|
| GLM Part Number | 3937GM |
| Yamaha OEM | 6K7-11601-02-00 |
| Yamaha OEM | 6R5-11603-00-00 |
| Yamaha OEM | 64D-11603-00-00 |
| Yamaha OEM | 64D-11603-01-00 |
| Current Yamaha OEM | 64D-11603-02-00 |
| Sierra | 18-39320 |
Product Specifications
- Brand: GLM Marine
- Part Number: 3937GM
- Part Type: Piston Ring Kit
- Size: Standard Bore
- Bore Diameter: 3.544"
- Engine Type: Yamaha 2-Stroke Outboards
- Application: Standard Bore Rebuilds and Piston Service
Prefer Pro Marine?
Pro Marine 3937 Standard Piston Ring Kit
Looking for the Pro Marine version? We also stock the Pro Marine 3937 Standard Piston Ring Kit for the same Yamaha applications and OEM cross references.
What This Part Is Used For
Piston rings seal combustion pressure, help transfer heat from the piston to the cylinder wall, and maintain proper compression. Replacing worn rings during a rebuild helps restore engine performance and reliability.
This standard-size ring kit is intended for engines that remain within factory bore specifications and do not require oversized pistons or rings.
Key Features & Benefits
- GLM Marine aftermarket piston ring kit
- Standard bore replacement
- 3.544" bore size
- Replaces multiple Yamaha OEM piston ring assemblies
- Ideal for powerhead rebuilds and piston replacement
- Manufactured to OEM specifications
- Pro Marine alternative linked above
FAQ
Is this a standard size ring kit?
Yes. Part number 3937GM is a standard bore piston ring kit.
What Yamaha OEM numbers does this replace?
It replaces 6K7-11601-02-00, 6R5-11603-00-00, 64D-11603-00-00, 64D-11603-01-00, and 64D-11603-02-00.
Can I use this on an oversized piston?
No. This is a standard-size ring kit. Oversized pistons require matching oversized rings.
Do you carry a Pro Marine version?
Yes. The Pro Marine 3937 version is linked above.
Should I replace rings during a rebuild?
Yes. Replacing piston rings is standard practice during most powerhead rebuilds and piston service procedures.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed internal engine parts are not returnable.
- Return authorization is required before sending items back.
Searchable Terms
3937GM, GLM 3937GM, Yamaha piston ring kit, Yamaha standard ring kit, Yamaha 115 piston rings, Yamaha 130 piston rings, Yamaha 150 piston rings, Yamaha 175 piston rings, Yamaha 200 piston rings, Yamaha 225 piston rings, Yamaha 250 piston rings, Yamaha V4 piston rings, Yamaha V6 piston rings, 6K7-11601-02-00, 6R5-11603-00-00, 64D-11603-00-00, 64D-11603-01-00, 64D-11603-02-00, 18-39320, GLM Marine, Pro Marine 3937
6K7-11601-02-00
6R5-11603-00-00
64D-11603-00-00
64D-11603-01-00
64D-11603-02-00
68D-E1241-4A-00
68D-E2414-A0-00
818864
818864T
846070
94318
96158
96158B
96158T
881180A02
881180A03
OEM Mercury Water-In-Fuel Sensor
Mercury Water-In-Fuel Sensor 8M0157779 For Verado, 450R, 500R, V10 & V12
The Mercury 8M0157779 water-in-fuel sensor is an OEM Mercury fuel system sensor used with compatible Mercury water-separating fuel filter assemblies.
This sensor fits select L6 Verado applications, Mercury Racing 450R and 500R V8 outboards, Mercury 350HP-425HP V10 outboards, and Mercury 500HP-600HP V12 outboards.
Compatible Applications
| Engine Family | Horsepower / Model | Engine Platform | Application |
|---|---|---|---|
| Mercury Verado | L6 Verado Models | Inline 6-Cylinder Verado | Water-in-fuel sensor |
| Mercury Racing | 450R, 500R | V8 FourStroke | Water-in-fuel sensor |
| Mercury Verado / FourStroke | 350HP-425HP | V10 FourStroke | Water-in-fuel sensor |
| Mercury Verado / SeaPro | 500HP-600HP | V12 FourStroke | Water-in-fuel sensor |
This Mercury 8M0157779 water-in-fuel sensor is used on select L6 Verado, 450R-500R V8 Racing, 350HP-425HP V10, and 500HP-600HP V12 outboard fuel filter applications.
Always verify your engine model, fuel filter assembly, and current sensor number before ordering.
Part Numbers & Cross References
| Brand / Source | Part Number |
|---|---|
| Mercury Marine | 8M0157779 |
| Related Fuel Filter | 8M0166596 |
Related Fuel Filter
Mercury Fuel Filter 8M0166596
OEM Mercury water-separating fuel filter used with this sensor on compatible 450R, 500R V8 and 500HP-600HP V12 applications.
View ProductWhat This Water-In-Fuel Sensor is Used For
The Mercury 8M0157779 water-in-fuel sensor monitors the fuel filter assembly for water accumulation and helps alert the operator when water is detected in the fuel system.
Water contamination can cause poor performance, corrosion, injector problems, and fuel system damage. Replacing a damaged or faulty water-in-fuel sensor helps maintain proper warning system function.
Key Features and Benefits
- OEM Mercury water-in-fuel sensor
- Fits select L6 Verado applications
- Fits Mercury Racing 450R and 500R V8 outboards
- Fits Mercury 350HP-425HP V10 outboards
- Fits Mercury 500HP-600HP V12 outboards
- Used with compatible Mercury water-separating fuel filter assemblies
- Helps detect water accumulation in the fuel system
- Pairs with Mercury fuel filter 8M0166596 on compatible applications
Part Details
- Part Number: 8M0157779
- Product Type: Water-In-Fuel Sensor
- Brand: Mercury Marine
- Application: Mercury Verado, Racing V8, V10, and V12 fuel systems
- Common Fitment: L6 Verado, 450R, 500R, 350-425HP V10, 500-600HP V12
- Related Fuel Filter: 8M0166596
- OEM Mercury Part: Yes
FAQ
What engines does Mercury 8M0157779 fit?
This sensor fits select L6 Verado applications, Mercury Racing 450R and
500R V8 outboards, Mercury 350HP-425HP V10 outboards, and Mercury
500HP-600HP V12 outboards.
Does this fit the Mercury 500R?
Yes. Mercury 8M0157779 is used on compatible Mercury Racing 500R V8
fuel filter applications.
Does this fit Mercury V10 outboards?
Yes. This sensor fits compatible Mercury 350HP-425HP V10 outboards.
What fuel filter goes with this sensor?
The related Mercury water-separating fuel filter is part number 8M0166596,
linked above.
What does a water-in-fuel sensor do?
It detects water accumulation in the fuel filter assembly so the engine
warning system can alert the operator to fuel contamination.
Is this a genuine Mercury part?
Yes. This is an OEM Mercury Marine water-in-fuel sensor.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Electrical sensors must be new, unused, and uninstalled.
- Installed or fuel-contaminated sensors are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0157779, Mercury 8M0157779, Mercury water in fuel sensor, Mercury water-in-fuel sensor, Mercury fuel filter sensor, Mercury Verado fuel sensor, L6 Verado water in fuel sensor, Mercury 450R water in fuel sensor, Mercury 500R water in fuel sensor, Mercury Racing fuel sensor, Mercury V8 water in fuel sensor, Mercury V10 water in fuel sensor, Mercury V12 water in fuel sensor, Mercury 350HP V10 fuel sensor, Mercury 400HP V10 fuel sensor, Mercury 425HP V10 fuel sensor, Mercury 500HP V12 fuel sensor, Mercury 600HP V12 fuel sensor, 8M0166596, Mercury water separating fuel filter sensor
6AW-11603-00-00
63P-11603-00-00
63P-11603-01-00
69J-11603-00-00
69J-11603-01-00
887841T
887841T04