Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Outboard Motor Parts | OEM & Aftermarket

Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.

Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.

 

Shop Outboard Parts by Manufacturer

 

Find the Correct Outboard Part

Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.

Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »
 

Shop Outboard Parts by Engine System

Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.

 

Common Outboard Problems and Where to Start

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
  • Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
  • Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
  • Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
  • Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
  • Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
 

Why Buy Outboard Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for major outboard engine brands.
  • Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
  • Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
 

OEM and Aftermarket Outboard Parts

OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.

Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.

 

Frequently Asked Questions

How do I find the correct parts for my outboard motor?

Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.

Can I search Pro Marine by OEM part number?

Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

What information should I have before ordering an outboard part?

Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.

What is the difference between OEM and aftermarket outboard parts?

OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.

Are aftermarket outboard motor parts reliable?

Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.

Do you carry parts for older outboard motors?

Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.

What outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.

 

Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.

|◀ ◀ 4033 - 4044 of 8466 ▶ ▶|
View:
Mercury 65hp 3cyl
Item#:
652
Cross Reference#:
10-652
18-2504
32090
505-25
508821
60310
74511
76401
88449
Manufacturer Item:
60310
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.46
Each
Yamaha 115-130 90º V4 84-89 C115 91-96 Small Taper
Item#:
6E5C
Cross Reference#:
6E5-11411-01-00
6E5-11411-09-00
Manufacturer Item:
6E5-11411-01-00
Manufacturer:
Pro Marine
Available:
In Stock
 
Heavy
Your Price:
650.00
Each
Mercury 15/20/25 HP 1988-04
Item#:
5113
Cross Reference#:
85113
85113T
Manufacturer Item:
85113T
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
27.69
Each
Yamaha 115-200hp
Item#:
5110
Cross Reference#:
18-5110
187-6511
6E5-85570-10-00
6E5-85570-11-00
Manufacturer Item:
6E5-85570-10-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
37.86
Each
Mercury 175, XR4,2.4L 1985-1991
Item#:
668
Cross Reference#:
10-668
10668K
11338A85
11338A88
18-4319
39450
500-226
500-234
9-64212
Manufacturer Item:
11338A88
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
129.09
Each
Mercury 2.0L V6
Item#:
667
Cross Reference#:
10-667
10-667K
18-4317
18-4317
39440
500-212
500-214
9-64200
90484A86
90484A88
Manufacturer Item:
90484A88
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
107.41
Each
Yamaha V4-V6 84-92 21.5mm Wrist Pin
Item#:
6E5N
Cross Reference#:
6E5-11650-01-00
9-52403
Manufacturer Item:
6E5-11650-01-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
97.01
Each
Mercury 15/20/25 HP
Item#:
5114
Cross Reference#:
85114
85114T
Manufacturer Item:
85114T
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
30.49
Each
Pro Marine 669 Replaces Mercury 89221A32, 89221A84 & 89221A85

Pro Marine Powerhead Gasket Kit

Mercury Mariner 200HP 2.4L Powerhead Gasket Kit

The Pro Marine 669 Powerhead Gasket Kit is designed for Mercury and Mariner 200HP 2.4L V6 outboards. This kit replaces Mercury OEM gasket set numbers 89221A32, 89221A84, 89221A85, and 89221A88, and includes the Pro Marine 246-1 cylinder head gaskets.

Use this kit during a powerhead rebuild, major gasket service, or engine teardown where the powerhead sealing components need to be replaced together.

Compatible Applications

Pro Marine 669 cross references Mercury OEM gasket set numbers 89221A32, 89221A84, and 89221A85. Pro Marine lists this kit for Mercury 200HP 2.4L 1983-1991 applications with 246-1 head gaskets, while related aftermarket cross references for 89221A88 / Sierra 18-4319 commonly list Mercury / Mariner V6 2.4L 200HP applications in the late 1970s through 1990 range depending on source and engine configuration.

Manufacturer Common Application Notes
Mercury 200HP V6 2.4L Commonly listed for 1983-1991 Pro Marine 669 applications
Mariner 200HP V6 2.4L Verify by OEM gasket kit number and serial number
Mercury / Mariner V6 2.4L 3.375" Bore Applications Related 89221A88 / Sierra 18-4319 family listings include 200HP 2.4L applications
Important Fitment Note:

Mercury produced multiple V6 gasket kit families for 2.0L, 2.4L, and 2.5L engines. Always verify your engine serial number and original OEM gasket set number before ordering.

This kit replaces Mercury OEM numbers 89221A32, 89221A84, 89221A85, and superseded OEM 89221A88.

OEM & Cross Reference Numbers

Type Part Number
Pro Marine 669
Mercury OEM 89221A32
Mercury OEM 89221A84
Mercury OEM 89221A85
Mercury OEM Supersession 89221A88
Sierra 18-4319
WSM 500-238
Mallory 9-64201

What Is Included

This Pro Marine 669 powerhead gasket kit includes the following linked Pro Marine components. Customers who prefer to build their own kit can use the parts list below to order individual gaskets separately.

Qty Component Description
2 246-1 Mercury Mariner V6 2.4L 150-220HP Head Gasket
1 425 O-Ring, Lower End Cap Mercury V6
1 428 O-Ring, Upper End Cap Mercury 70-200 3-Cylinder / 2.5L SportJet 175-240
2 654 Exhaust Divider Gasket Mercury 135-200HP 2.4L V6
2 657 Relief Valve Gasket 4-Bolt Mercury 135-225, XR4, XR6, SportJet
3 660 Carb Mounting Gasket Mercury 135-175 V6 Early
1 677 Exhaust Plate Gasket Mercury 115-200 2.5L V6
1 678 Exhaust Housing Gasket Mercury 150-200 2.0L-2.4L
1 679 Driveshaft Housing Gasket Mercury 115-225 2.5L EFI/DFI
3 681 Air Box to Carb Gasket Mercury 135-200 2.5L V6 / SportJet
1 684 Reed Block Gasket 5-Petal Mercury 200 2.4L
2 685 Water Cover Gasket 2-Piece Head Mercury 135-200 2.4L V6
2 686 Crankcase Cork Strip Gasket Mercury V6
6 689 Reed Block Gasket Mercury 175-200 2.4L V6 Vertical Reed
2 8890 Relief Valve Gasket 2-Bolt Mercury 200-300 EFI/DFI
1 942 Exhaust Plate Sealer Hose Mercury 115-225 2.5L V6 / SportJet

Powerhead Rebuild Use

A complete powerhead gasket kit helps replace the major sealing components disturbed during teardown and reassembly. On Mercury and Mariner V6 2.4L engines, replacing old gaskets is critical for maintaining crankcase sealing, cooling passage integrity, exhaust sealing, and cylinder head compression sealing.

Always inspect gasket surfaces for corrosion, pitting, warpage, or damage before reassembly. Follow the Mercury service manual for torque specifications, sealant use, and installation sequence.

Pro Marine 669 Features

  • Complete Pro Marine powerhead gasket kit
  • Designed for Mercury / Mariner 200HP 2.4L V6 applications
  • Includes two 246-1 cylinder head gaskets
  • Replaces Mercury 89221A32, 89221A84, 89221A85, and 89221A88
  • Cross references Sierra 18-4319, WSM 500-238, and Mallory 9-64201
  • Includes internally linked individual components for easier reorder

FAQ

What OEM numbers does Pro Marine 669 replace?
Pro Marine 669 replaces Mercury 89221A32, 89221A84, 89221A85, and 89221A88.

What engine does this gasket kit fit?
Pro Marine lists this kit for Mercury 200HP 2.4L outboards from 1983-1991. Related 89221A88 / Sierra 18-4319 applications commonly list Mercury and Mariner 200HP 2.4L V6 engines.

Does this kit include head gaskets?
Yes. This kit includes two Pro Marine 246-1 cylinder head gaskets.

Can I buy the individual gaskets separately?
Yes. The included components are linked in the What Is Included section above.

Will this fit a 2.5L Mercury V6?
Do not assume fitment on a 2.5L engine. This kit is for the 89221A32 / 89221A84 / 89221A85 / 89221A88 gasket kit family. Verify your OEM kit number before ordering.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Gasket kits must be new, unused, and in original packaging.
  • Installed gaskets are not returnable.
  • Return authorization required before returning merchandise.

Searchable Terms

669, Pro Marine 669, Mercury 89221A32, Mercury 89221A84, Mercury 89221A85, Mercury 89221A88, Mercury 200HP 2.4L gasket kit, Mercury powerhead gasket kit, Mariner 200HP gasket kit, Sierra 18-4319, WSM 500-238, Mallory 9-64201, 246-1, 425, 428, 654, 657, 660, 677, 678, 679, 681, 684, 685, 686, 689, 8890, 942

Item#:
669
Cross Reference#:
10-669
10-669K
18-4319
18-4319
39250
500-238
89221A32
89221A84
89221A85
9-64201
Manufacturer Item:
89221A88
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
126.00
Each
Mercury 135-175 2.0-2.4L
Item#:
680
Cross Reference#:
18-2508
18-2508-1
32540
96440
99776
997761
Manufacturer Item:
997761
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.88
Each
Mercury 115-225 2.5L EFI/DFI
Item#:
679
Cross Reference#:
18-2511
32510
508842
510-30
67074
88727
99173
991731
991732
991734
Manufacturer Item:
991734
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.24
Each
Mercury 150-200 2.0-2.4L
Item#:
678
Cross Reference#:
10-678
18-2503
32530
508841
510-35
78068
99177
991771
991772
Manufacturer Item:
991772
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.76
Each
|◀ ◀ 4033 - 4044 of 8466 ▶ ▶|
View: