S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair
Honda Outboard Honda cooling, fuel, electrical, and engine parts
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
PH130-0055
18-6425
67F-81800-00-00
67F-81800-01-00
67F-81800-02-00
67F-81800-03-00
67F-81800-04-00
8M0065220
8M6007420
8M6014122
804312T1
804312T1
18-6427
6CJ-81800-00-00
6CJ-81800-01-00
6C5-81800-00-00
68V-81800-00-00
68V-81800-01-00
68V-81800-02-00
68V-81800-03-00
8M6007422
8M6014124
881368T03
881368T1
881368T2
888333T1
67C-81800-00-00
67C-81800-01-00
67C-81800-02-00
854636T
859170T
859170T1
884045T
888160T
893887T
65W-81800-00-00
65W-81800-01-00
65W-81800-02-00
65W-81800-03-00
7051
822462
822462T1
830308
830308T
859169T
888151T
893886T
893890T
9-15017
Mercury Fuel Module Seal
Mercury 75-115 EFI / Verado 135-300 Fuel Pump Seal 880596510
This OEM Mercury seal is used in Mercury fuel supply module applications that use lift pump kit 880596T58. It is the companion seal for Pro Marine lift pump applications 80596-58P and 80596-58.
Seal 880596510 is commonly serviced with the related Mercury isolator 880596509. Always verify your engine model, serial number, and OEM parts diagram before ordering fuel module components.
Compatible Applications
| Engine Family | Application | Fitment Note |
|---|---|---|
| Mercury / Mariner 75-115 EFI 4-stroke | Fuel supply module lift pump seal | Used with 880596T58 lift pump applications. Verify serial number before ordering. |
| Mercury / Mariner Verado 135-300 4-stroke | 4-cylinder and 6-cylinder fuel module service | Related to 880596T58 lift pump service. Confirm model, serial range, and parts diagram. |
| Mercury Verado 200 / 225 / 250 6-cylinder | Fuel supply module seal reference | Verified fitment appears in 6-cylinder Verado fuel supply module listings; confirm exact serial range. |
Important Fitment Note
OEM number 880596510 is a Mercury fuel supply module seal used with the lift pump area, not the complete pump assembly. For best results, match this seal by OEM number, fuel pump number 880596T58, and your Mercury serial-number-specific parts diagram.
OEM & Cross Reference Numbers
| Mercury OEM Number | 880596510 |
|---|---|
| Mercury Prefixed Number | 26-880596510 |
| Part Description | Seal for 80596-58 / fuel supply module lift pump service |
| Related Mercury Isolator | 880596509 |
| Related Lift Pump Kit | 880596T58 |
| Pro Marine Pump Numbers | 80596-58P, 80596-58 |
What This Part is Used For
Seal 880596510 is used in the Mercury fuel supply module at the lift pump service area. When replacing a lift pump or servicing the fuel module, this seal helps support proper sealing around the pump assembly. Inspect the related isolator and surrounding fuel module seals during service.
Related Fuel Pump Parts
Mercury Fuel Pump Isolator
OEM Mercury isolator 880596509 used with this seal in the fuel module lift pump area.
View Isolator 880596509
Pro Marine Fuel Pump Lift
Aftermarket lift pump for Mercury 75-115 4-stroke and Verado 135-300 applications using 880596T58.
View Pump 80596-58P
Pro Marine Fuel Pump Kit with Seals
Pro Marine lift pump kit option for Mercury 75-115 4-stroke and Verado 135-300 4 and 6 cylinder applications.
View Pump Kit 80596-58Key Features and Benefits
- OEM Mercury Marine seal for fuel supply module lift pump service.
- Used with lift pump applications referencing Mercury 880596T58.
- Companion part to Mercury isolator 880596509.
- Supports proper sealing when replacing or servicing the lift pump area.
- Best verified by OEM number, engine serial number, and Mercury parts diagram.
Service Kit Details
| Item Number | 880596510 |
|---|---|
| Manufacturer Item | 880596510 |
| Manufacturer | Mercury Marine |
| Product Type | Fuel module seal |
| Related Fuel Pump Type | Electric fuel module lift pump application |
FAQ
Is 880596510 the lift pump?
No. 880596510 is the seal used with the fuel module lift pump area. The related Mercury lift pump kit number is 880596T58.
Does this seal go with isolator 880596509?
Yes. Seal 880596510 and isolator 880596509 are related fuel module service parts used around the lift pump assembly.
Will this fit every Mercury 75-115 EFI or Verado 135-300?
Not automatically. Fuel module parts vary by model and serial range, so confirm the OEM part number and your engine serial before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury fuel pump seal, Mercury fuel supply module seal, Mercury Verado fuel pump seal, Mercury 75 90 115 EFI fuel module seal, Mercury lift pump seal.
Searchable Part Numbers
880596510, 26-880596510, 880596509, 880596T58, 80596-58P, 80596-58
HZY3312200003
PH130-0070
31200-ZT3-003
31200-ZY3-003
3455
7448
8M6007339
31911-95D00-02M
6H4-81800-10-00
6H4-81800-11-00
6H4-81800-12-00
8M6007417
31100-95601
31100-92E00
6E5-81800-12-00
8M6007413
6H3-81800-11-00
8M6007418