S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
327591
328212
328376
0315232
0769106
0777743
18-7296
313364
315232
777743
878953
9-36803
0763782
0778479
133-3508
583508
763782
778479
18-3472
5007972
769140
0438930
435317
438930
0438930
435317
438930
18-1752
394462
9-52100
Genuine OMC / Bombardier Johnson and Evinrude Ignition Switch
Johnson Evinrude OEM Ignition Switch with Safety Lanyard - 5801
OMC / Bombardier 5801 is a genuine OEM ignition switch assembly for select Johnson and Evinrude outboards, remote controls and electrical systems.
This ignition switch crosses to OMC / BRP part numbers 5005801, 175974, 0175974, 765562 and 0765562.
Applications include select Johnson and Evinrude 2-stroke and 4-stroke engines, commercial models, portable models, remote-control assemblies and electrical-system applications. Always verify the original OEM number and exact engine model before ordering.
Part Type: Ignition / Key Switch with Safety Lanyard
Manufacturer: OMC / Bombardier / BRP
OEM or Aftermarket: Genuine OEM
Primary OEM #: 175974
BRP Replacement #: 5005801
Application: Johnson / Evinrude Outboard and Remote Control
Pro Marine Item #: 5801
Compatible Applications
The supplied fitment for OEM ignition switch 5801 / 5005801 includes Johnson and Evinrude outboards, commercial engines, remote controls and electrical assemblies.
General Engine Applications
| Engine Family | Application |
|---|---|
| Johnson / Evinrude 40 HP | 2-Cylinder 3.187 Bore Looper, 2-Stroke |
| Johnson / Evinrude 50 HP | 2-Cylinder 3.187 Bore Looper, 2-Stroke |
| Johnson / Evinrude 9.9 HP | 4-Stroke, 305cc, 1995-2001 |
| Johnson / Evinrude 15 HP | 4-Stroke, 305cc, 1995-2001 |
| Johnson / Evinrude 65 HP | 3-Cylinder 3.187 Bore Looper |
| Johnson / Evinrude 150 HP | 6-Cylinder 3.600 Bore 60-Degree Carb |
| Johnson / Evinrude 200 HP | 6-Cylinder 3.685 Big Bore Looper |
| 60-Degree V4 Models | Select Johnson / Evinrude applications |
Commercial and Special Model Applications
| Model | Description / Year |
|---|---|
| E150WPLSIF | Commercial, electric start, TNT, 20 in shaft - 2001 |
| E150WPLSSC | Commercial, electric start, TNT, 20 in shaft - 2000 |
| E200WPXEEN | 1999 |
| E200WPXEES | 1999 |
| E200WPXSIF | Commercial, electric start, TNT, 25 in shaft - 2001 |
| E200WPXSSC | Commercial, electric start, TNT, 25 in shaft - 2000 |
| E65WELSIR | Commercial, electric start, 20 in shaft - 2001 |
| E65WELSSC | Commercial, electric start, 20 in shaft - 2000 |
| J150WPLEES | 1999 |
| J150WPLSIF | Commercial, electric start, TNT, 20 in shaft - 2001 |
| J150WPLSSC | Commercial, electric start, TNT, 20 in shaft - 2000 |
| J200WPXEEN | 1999 |
| J200WPXEES | 1999 |
| J200WPXSIF | Commercial, electric start, TNT, 25 in shaft - 2001 |
| J200WPXSSC | Commercial, electric start, TNT, 25 in shaft - 2000 |
| J65WELSIR | Commercial, electric start, 20 in shaft - 2001 |
| J65WELSSC | Commercial, electric start, 20 in shaft - 2000 |
40 and 50 HP Model Applications
Supplied fitment also includes the following Johnson model numbers:
- J40PLSOC
- J40PLSRS
- J50PLSOC
- J50PLSRS
Commercial / Special 125, 150 and 200 HP Model Applications
| Family | Models |
|---|---|
| SE125 | SE125WTPLJ, SE125WTPLN, SE125WTPXJ, SE125WTPXN |
| SE150 | SE150WTPLB, SE150WTPLT, SE150WTPLT4, SE150WTPLY, SE150WTPXB, SE150WTPXT, SE150WTPXT4, SE150WTPXY |
| SE200 | SE200WTPLA, SE200WTPLG, SE200WTPLS, SE200WTPXA, SE200WTPXG, SE200WTPXS |
| SJ125 | SJ125WTPLJ, SJ125WTPLN, SJ125WTPXJ, SJ125WTPXN |
| SJ150 | SJ150WTPLB, SJ150WTPLT, SJ150WTPLT4, SJ150WTPLY, SJ150WTPXB, SJ150WTPXT, SJ150WTPXT4, SJ150WTPXY |
| SJ200 | SJ200WTPLA, SJ200WTPLG, SJ200WTPLS, SJ200WTPXA, SJ200WTPXG, SJ200WTPXS |
Portable and Small 4-Stroke Applications
Supplied fitment includes 9.8 Portable, 15 Portable, and numerous Johnson / Evinrude / Bombardier 10 HP and 15 HP four-stroke model families.
| Brand / Family | Model Numbers |
|---|---|
| B10 Series | B10EGL4ABA, B10EGL4ABB, B10EGL4AFA, B10EL4AAA, B10EL4AAB, B10EL4AAC, B10PL4AAA, B10PL4AAB, B10PL4AAC, B10PX4AAA, B10PX4AAB, B10PX4AAC, B10R4AAA, B10R4AAB, B10R4AAC, B10RG4ABA, B10RG4ABB, B10RG4AFA, B10RGL4ABA, B10RGL4ABB, B10RGL4AFA, B10RL4AAA, B10RL4AAB, B10RL4AAC, B10TEL4AAA, B10TEL4AAB, B10TEL4AAC, B10TPL4AAA, B10TPL4AAB, B10TPL4AAC, B10TPX4AAA, B10TPX4AAB, B10TPX4AAC |
| B15 Series | B15PL4AAA, B15PL4AAB, B15PL4AAC, B15R4AAA, B15R4AAB, B15R4AAC, B15RG4ABA, B15RG4ABB, B15RGL4ABA, B15RGL4ABB, B15RL4AAA, B15RL4AAB, B15RL4AAC, B15TE4AAA, B15TE4AAB, B15TE4AAC, B15TEL4AAA, B15TEL4AAB, B15TEL4AAC |
| E10 Series | E10EL4AAA, E10EL4AAB, E10EL4AAC, E10PGL4ABA, E10PGL4ABB, E10PGL4AFA, E10PL4AAA, E10PL4AAB, E10PL4AAC, E10PX4AAA, E10PX4AAB, E10PX4AAC, E10R4AAA, E10R4AAB, E10R4AAC, E10RG4ABA, E10RG4ABB, E10RG4AFA, E10RGL4ABB, E10RGL4AFA, E10RGLABA, E10RL4AAA, E10RL4AAB, E10RL4AAC, E10TEL4AAA, E10TEL4AAB, E10TEL4AAC, E10TPL4AAA, E10TPL4AAB, E10TPL4AAC, E10TPL4ABA, E10TPL4ABB, E10TPL4AFA, E10TPX4AAA, E10TPX4AAB, E10TPX4AAC |
| E15 Series | E15PGL4ABA, E15PGL4ABB, E15PL4AAA, E15PL4AAB, E15PL4AAC, E15R4AAA, E15R4AAB, E15R4AAC, E15RG4ABA, E15RG4ABB, E15RGL4ABA, E15RGL4ABB, E15RL4AAA, E15RL4AAB, E15RL4AAC, E15TE4AAA, E15TE4AAB, E15TE4AAC, E15TEG4ABA, E15TEG4ABB, E15TEL4AAA, E15TEL4AAB, E15TEL4AAC |
Electrical and Remote Control Applications
The supplied fitment also identifies this switch in the following Johnson / Evinrude control and electrical categories:
- Electrical
- Electrical - 1995
- Electrical - 1996
- Electrical - 1997
- Electrical - 1998
- Electrical - 1999
- Electrical - 2000
- Remote Control - 1996
- Remote Controls - 1997
- Remote Controls - 1998
- Remote Controls - 1999
- Remote Controls - 2000
- Remote Controls and Cables
This ignition switch is used in a wide variety of Johnson and Evinrude engine and remote-control applications.
Do not determine fitment by horsepower alone.
Verify your exact model number or confirm that the original switch crosses to 5005801, 175974, 0175974, 765562 or 0765562 before ordering.
OEM and Cross Reference Numbers
| Brand / Type | Part Number |
|---|---|
| OMC / Bombardier OEM | 175974 |
| BRP / OMC | 5005801 |
| OMC | 0175974 |
| OMC | 0765562 |
| OMC | 765562 |
Pro Marine Aftermarket Version Available
Pro Marine also stocks an aftermarket replacement ignition switch for the same compatible Johnson and Evinrude applications.
Choose between the genuine OMC / Bombardier OEM switch and the Pro Marine 5801P aftermarket replacement.
View Pro Marine 5801P Ignition SwitchWhat This Part is Used For
The ignition switch is the primary operator control for the engine starting and ignition circuits in the applicable Johnson and Evinrude remote-control systems.
BRP identifies 5005801 as an ignition switch with lanyard. The safety lanyard is part of the engine cut-off system and allows the ignition to be interrupted if the operator moves away from the helm.
The switch is installed in compatible Johnson / Evinrude control and electrical systems and provides the keyed starting function for the outboard.
Ignition Switch with Safety Lanyard
The OEM 5005801-style switch incorporates an engine cut-off safety lanyard as part of the control system.
The lanyard should be properly attached to the operator whenever the boat is underway. If the lanyard is pulled away from the control, the safety switch can interrupt engine operation.
After replacing the ignition switch, test the key operation and emergency engine cut-off function according to the appropriate Johnson / Evinrude service procedure.
Do not operate the boat if the engine cut-off function does not operate correctly.
Common Signs of an Ignition Switch Problem
- Engine will not crank when the key is turned
- Intermittent starter operation
- Ignition cuts in and out when the key is moved
- Loose or badly worn key operation
- Corroded or damaged switch terminals
- Damaged safety-lanyard switch function
- Physical damage to the switch body
- Water or corrosion damage inside the control box
Installation Tips
- Disconnect battery power before servicing the ignition switch.
- Verify the existing OEM switch number before removal.
- Photograph or label the original wiring before disconnecting the switch.
- Inspect connectors and terminals for corrosion or heat damage.
- Route wiring so it cannot interfere with throttle or shift components.
- Reconnect all wires according to the applicable Johnson / Evinrude wiring diagram.
- Verify normal key operation before operating the boat.
- Test the engine cut-off safety lanyard after installation.
Key Features and Benefits
- Genuine OMC / Bombardier OEM ignition switch
- BRP / OMC replacement number 5005801
- OEM reference 175974
- Includes compatible engine cut-off lanyard configuration
- Fits select Johnson and Evinrude outboards
- Fits select 2-stroke and 4-stroke applications
- Fits numerous remote-control and electrical-system applications
- Fits select commercial Johnson and Evinrude models
- Crosses to 0175974
- Crosses to 765562 / 0765562
- Pro Marine aftermarket version also available
FAQ
Is 5801 a genuine Johnson / Evinrude OEM ignition switch?
Yes. Pro Marine lists 5801 as a genuine
OMC / Bombardier OEM ignition switch.
What OEM number is Pro Marine item 5801?
Pro Marine lists the manufacturer item as 175974, with
cross references including 5005801, 0175974, 765562 and
0765562.
What is BRP 5005801?
BRP identifies 5005801 as an ignition switch with
lanyard for compatible Johnson and Evinrude applications.
Does this fit 40 and 50 HP Johnson / Evinrude engines?
The supplied fitment includes select
40 and 50 HP 2-cylinder 3.187 bore looper applications.
Verify the exact model or OEM part number.
Does this fit 9.9 and 15 HP four-stroke engines?
Yes. The supplied fitment includes select
9.9 and 15 HP 305cc four-stroke applications from
1995-2001, along with additional B10, B15, E10 and E15 model
families.
Does this fit 150 and 200 HP Johnson / Evinrude engines?
The supplied fitment includes select
150 HP 60-degree 6-cylinder carbureted models and
200 HP 6-cylinder big-bore looper models, including
several commercial and special model-number applications.
Does this switch fit remote control boxes?
Yes. The supplied fitment specifically includes Johnson / Evinrude
remote-control applications from 1996 through 2000,
plus additional remote-controls-and-cables listings.
Can I order this based only on horsepower?
No. The fitment spans several engine families and remote-control systems.
Match the exact engine model or one of the listed OEM part numbers before
ordering.
Do you stock a Pro Marine aftermarket version?
Yes. Pro Marine also stocks the
Pro Marine 5801P Ignition Switch
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
5801, 5005801, 175974, 0175974, 765562, 0765562
Searchable Terms
Johnson ignition switch, Evinrude ignition switch, Johnson key switch, Evinrude key switch, OMC ignition switch, BRP ignition switch, Johnson Evinrude ignition switch with lanyard, Johnson remote control ignition switch, Evinrude remote control ignition switch, 5005801 ignition switch, 175974 ignition switch, 765562 ignition switch, Johnson kill switch, Evinrude kill switch
0765562
175974
5005801
765562